https://arxiv.org/api/oXEO6gUUcEcq2YszalHmGg1uBxY2026-06-21T13:45:55Z159664515http://arxiv.org/abs/2012.08325v139 Hints to Facilitate the Use of Semantics for Data on Agriculture and Nutrition2020-12-15T14:36:21ZIn this paper, we report on the outputs and adoption of the Agrisemantics Working Group of the Research Data Alliance (RDA), consisting of a set of recommendations to facilitate the adoption of semantic technologies and methods for the purpose of data interoperability in the field of agriculture and nutrition. From 2016 to 2019, the group gathered researchers and practitioners at the crossing point between information technology and agricultural science, to study all aspects in the life cycle of semantic resources: conceptualization, edition, sharing, standardization, services, alignment, long term support. First, the working group realized a landscape study, a study of the uses of semantics in agrifood, then collected use cases for the exploitation of semantics resources-a generic term to encompass vocabularies, terminologies, thesauri, ontologies. The resulting requirements were synthesized into 39 "hints" for users and developers of semantic resources, and providers of semantic resource services. We believe adopting these recommendations will engage agrifood sciences in a necessary transition to leverage data production, sharing and reuse and the adoption of the FAIR data principles. The paper includes examples of adoption of those requirements, and a discussion of their contribution to the field of data science.2020-12-15T14:36:21ZCODATA Data Science Journal, Committee on Data for Science and Technology (CODATA), 2020, 19 (1)Caterina CaraccioloFAOSophie AubinDipSOClement JonquetLIRMM, UM, CNRSEmna AmdouniLIRMM, UM, CNRSRomain DavidMISTEA, ERINHA-AISBLLeyla GarciaZB MEDBrandon WhiteheadUR TSCF, INRAECatherine RousseyUR TSCF, INRAEArmando StellatoBC3Ferdinando VillaBC310.5334/dsj-2020-047http://arxiv.org/abs/2012.03290v1WI Fast Stats: a collection of web apps for the visualization and analysis of WI Fast Plants data2020-12-06T15:39:59ZWI Fast Stats is the first and only dedicated tool tailored to the WI Fast Plants educational objectives. WI Fast Stats is an integrated animated web page with a collection of R-developed web apps that provide Data Visualization and Data Analysis tools for WI Fast Plants data. WI Fast Stats is a user-friendly easy-to-use interface that will render Data Science accessible to K-16 teachers and students currently using WI Fast Plants lesson plans. Users do not need to have strong programming or mathematical background to use WI Fast Stats as the web apps are simple to use, well documented, and freely available.2020-12-06T15:39:59Z5 pages, 4 figuresYizhou LiuClaudia Solis-Lemushttp://arxiv.org/abs/2012.02628v1A Mitigation Score for COVID-192020-12-02T21:25:50ZThis note describes a simple score to indicate the effectiveness of mitigation against infections of COVID-19 as observed by new case counts. The score includes normalization, making comparisons across jurisdictions possible. The smoothing employed provides robustness in the face of reporting vagaries while retaining salient features of evolution, enabling a clearer picture for decision makers and the public.2020-12-02T21:25:50Z15 pages, 12 figuresJonathan D. Cohenhttp://arxiv.org/abs/1909.10405v2Dynamics of genetic code evolution: The emergence of universality2020-11-27T17:59:57ZWe study the dynamics of genetic code evolution. The model of Vetsigian et al. [1] and Vetsigian [2] uses the mechanism of horizontal gene transfer to demonstrate convergence of the genetic code to a near universal solution. We reproduce and analyze the algorithm as a dynamical system. All the parameters used in the model are varied to assess their impact on convergence and optimality score. We show that by allowing specific parameters to vary with time, the solution exhibits attractor dynamics. Finally, we study automorphisms of the genetic code arising due to this model. We use this to examine the scaling of the solutions in order to re-examine universality and find that there is a direct link to mutation rate.2019-09-23T14:59:09Z38 pagesPhys. Rev. E 103, 052409 (2021)John-Antonio ArgyriadisYang-Hui HeVishnu JejjalaDjordje Minic10.1103/PhysRevE.103.052409http://arxiv.org/abs/2011.12350v1Inverted repeats in coronavirus SARS-CoV-2 genome and implications in evolution2020-11-24T20:11:40ZThe coronavirus disease (COVID-19) pandemic, caused by the coronavirus SARS-CoV-2, has caused 60 millions of infections and 1.38 millions of fatalities. Genomic analysis of SARS-CoV-2 can provide insights on drug design and vaccine development for controlling the pandemic. Inverted repeats in a genome greatly impact the stability of the genome structure and regulate gene expression. Inverted repeats involve cellular evolution and genetic diversity, genome arrangements, and diseases. Here, we investigate the inverted repeats in the coronavirus SARS-CoV-2 genome. We found that SARS-CoV-2 genome has an abundance of inverted repeats. The inverted repeats are mainly located in the gene of the Spike protein. This result suggests the Spike protein gene undergoes recombination events, therefore, is essential for fast evolution. Comparison of the inverted repeat signatures in human and bat coronaviruses suggest that SARS-CoV-2 is mostly related SARS-related coronavirus, SARSr-CoV/RaTG13. The study also reveals that the recent SARS-related coronavirus, SARSr-CoV/RmYN02, has a high amount of inverted repeats in the spike protein gene. Besides, this study demonstrates that the inverted repeat distribution in a genome can be considered as the genomic signature. This study highlights the significance of inverted repeats in the evolution of SARS-CoV-2 and presents the inverted repeats as the genomic signature in genome analysis.2020-11-24T20:11:40ZChangchuan YinStephen S. -T. Yauhttp://arxiv.org/abs/2011.11639v1Improved fully automated method for the determination of medium to highly polar pesticides in surface and groundwater and application in two distinct agriculture-impacted areas2020-11-23T17:47:30ZWater is an essential resource for all living organisms. The continuous and increasing use of pesticides in agricultural and urban activities results in the pollution of water resources and represents an environmental risk. To control and reduce pesticide pollution, reliable multi-residue methods for the detection of these compounds in water are needed. In this context, the present work aimed at providing an analytical method for the simultaneous determination of trace levels of 51 target pesticides in water and applying it to the investigation of target pesticides in two agriculture-impacted areas of interest. The method developed, based on an isotopic dilution approach and on-line solid-phase extraction-liquid chromatography-tandem mass spectrometry, is fast, simple, and to a large extent automated, and allows the analysis of most of the target compounds in compliance with European regulations. Further application of the method to the analysis of selected water samples collected at the lowest stretches of the two largest river basins of Catalonia (NE Spain), Llobregat and Ter, revealed the presence of a wide suite of pesticides, and some of them at concentrations above the water quality standards (irgarol and dichlorvos) or the acceptable method detection limits (methiocarb, imidacloprid, and thiacloprid), in the Llobregat, and much cleaner waters in the Ter River basin. Risk assessment of the pesticide concentrations measured in the Llobregat indicated high risk due to the presence of irgarol, dichlorvos, methiocarb, azinphos ethyl, imidacloprid, and diflufenican (hazard quotient (HQ) values>10), and an only moderate potential risk in the Ter River associated to the occurrence of bentazone and irgarol (HQ>1).2020-11-23T17:47:30ZPublished in Science of the Total EnvironmentScience of The Total Environment Volume 745, 25 November 2020, 140650Maria Vittoria BarbieriLuis Simon Monllor-AlcarazCristina PostigoMiren Lopez de Alda10.1016/j.scitotenv.2020.140650http://arxiv.org/abs/2011.11578v1Reliable LC-MS/MS-based method for trace level determination of 50 medium to highly polar pesticide residues in sediments and ecological risk assessment2020-11-23T17:41:13ZThe occurrence of polar pesticides in sediments has not been extensively investigated because of their relatively poor hydrophobicity and apparently less persistence in the environment. However, their continuous release into the aquatic systems calls for the evaluation of their potential accumulation in sediments and the role of this matrix as a potential source of these compounds. Considering this, a method based on pressurized liquid extraction (PLE), extract clean-up by solid phase extraction (SPE) and analyte determination by liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) was developed and validated to analyze 50 relevant (frequently used and/or regulated or found in water) medium to highly polar pesticides in sediments. The method showed good performance regarding accuracy (relative recoveries between 76% and 124%), precision (relative standard deviation values <20%), sensitivity (LODs in the low ng/g for most compounds), linearity (coefficients of determination >0.99), and matrix effects (negligible for all analytes). The use of an isotope dilution approach for quantification ensures results reliability. As a part of the validation process, the method was applied to the analysis of the target pesticides in sediments from the Llobregat River (NE Spain) showing the presence of five of them, namely, terbutryn, dichlorvos, terbuthylazine, diazinon, and irgarol. All 5 pesticides, due to both the concentrations found and their physical-chemical characteristics, demonstrate high potential for bioaccumulation and risk to the aquatic organisms. Additional multidisciplinary studies that investigate pesticides occurrence in the different aquatic compartments and evaluate the potential risks for aquatic ecosystems are required to assess the environmental impact and significance of the presence of pesticides in sediments.2020-11-23T17:41:13ZPublished in Analytical and Bioanalytical chemistryAnal Bioanal Chem. 2019 Dec;411(30):7981-7996Maria Vittoria BarbieriCristina PostigoSimon Monllor-AlcarazDamia BarceloMiren Lopez de Alda10.1007/s00216-019-02188-0http://arxiv.org/abs/2011.11099v1Paradox resolved: The allometric scaling of cancer risk across species2020-11-22T20:33:12ZUnderstanding the cross-species behavior of cancer is important for uncovering fundamental mechanisms of carcinogenesis, and for translating results of model systems between species. One of the most famous interspecific considerations of cancer is Peto's paradox, which asserts that organisms with vastly different body mass are expected to have a vastly different degree of cancer risk, a pattern that is not observed empirically. Here we show that this observation is not a paradox at all but follows naturally from the interspecific scaling of metabolic rates across mammalian body size. We connect metabolic allometry to evolutionary models of cancer development in tissues to show that waiting time to cancer scales with body mass in a similar way as normal organism lifespan does. Thus, the expectation across mammals is that lifetime cancer risk is invariant with body mass. Peto's observation is therefore not a paradox, but the natural expectation from interspecific scaling of metabolism and physiology. These allometric patterns have theoretical implications for understanding life span evolution, and practical implications for using smaller animals as model systems for human cancer.2020-11-22T20:33:12Z10 pages, 3 figuresChristopher P. KempesGeoffrey B. WestJohn W. Pepperhttp://arxiv.org/abs/2011.08713v2Interpretation of Confocal ISO 21073: 2019 confocal microscopes: Optical data of fluorescence confocal microscopes for biological imaging- Recommended Methodology for Quality Control2020-11-19T08:19:33ZThe performance of a confocal imaging system may be no better than a general-purpose widefield system if it is not properly maintained or quality controlled. The publication of ISO 21073, 'Confocal microscopes- Optical data of fluorescence confocal microscopes for biological imaging', set a standard for the minimal Quality Control (QC) that should be performed for Confocal Microscopes. Here we describe methodology for performing the QC requirements to satisfy ISO 21073, as well as suggesting other QC methods that should be performed to obtain a minimum level of information about the microscope system.2020-11-17T15:38:41ZWhen drawing up this document, it became apparent that further work was required to determine best methodology and further minimal QC tests, as well as extend to other common imaging modalities. As a consequence, QUAREP-LiMi (https://quarep.org) was established to produce a more definitive and expansive QC Methodology manual for light microscopy to supersede this documentGlyn NelsonLaurent GelmanOrestis FaklarisRoland NitschkeAlex Laudehttp://arxiv.org/abs/2011.09273v1"Discrimination of virgin olive oils with different geographical origin: a rapid untargeted chromatographic approach based on volatile compounds"2020-11-18T13:37:48ZMany studies have shown that the geographic origin is one of the most influencing factors in the choice of olive oil. To avoid misleading, European regulation has established specific rules to report the geographical origin of extra virgin and virgin olive oils on the product label, but an official analytical procedure to verify this information has not been yet defined. In this work, a flash gas chromatography untargeted approach for determination of volatile compounds, followed by a chemometric data elaboration, is proposed for discrimination of EVOOs and VOOs according to their geographical origin (EU and Extra-EU). A set of 210 samples was analyzed and two different classification techniques were used, one linear and one non-linear. The two models were also validated using an external data set. Satisfactory results were obtained for both chemometric approaches: considering the PLS-DA, 89% and 81% of EU and Extra-EU samples, respectively, were correctly classified; for ANN the percentages were 93% and 89%, respectively. These results confirm the reliability of the method as a rapid approach to discriminate EVOOs and VOOs according to their geographical provenance.2020-11-18T13:37:48ZLWT- Food Science and Technology, 2020, 130:109566Rosa PalaganoEnrico ValliChiara CevoliAlessandra BendiniTullia Gallina Toschihttp://arxiv.org/abs/2011.04202v2Clinical Landscape of COVID-19 Testing: Difficult Choices2020-11-15T17:13:19ZThe coronavirus disease 2019 (COVID-19) pandemic has spread rapidly across the world, leading to enormous amounts of human death and economic loss. Until definitive preventive or curative measures are developed, policies regarding testing, contact tracing, and quarantine remain the best public health tools for curbing viral spread. Testing is a crucial component of these efforts, enabling the identification and isolation of infected individuals. Differences in testing methodologies, time frames, and outcomes can have an impact on their overall efficiency, usability and efficacy. In this early draft, we draw a comparison between the various types of diagnostic tests including PCR, antigen, and home tests in relation to their relative advantages, disadvantages, and use cases. We also look into alternative and unconventional methods. Further, we analyze the short-term and long-term impacts of the virus and its testing on various verticals such as business, government laws, policies, and healthcare.2020-11-09T05:54:01Z9 pages, 12 figuresDarshan GandhiSanskruti LandageJoseph BaeSheshank ShankarRohan SukumaranParth PatwaSethuraman TPriyanshi KatiyarShailesh AdvaniRohan IyerSunaina AnandAryan MahindraRachel BarbarAbhishek SinghRamesh Raskarhttp://arxiv.org/abs/2012.00652v1Repurposing the Combination Drug of Favipiravir, Hydroxychloroquine and Oseltamivir as a Potential Inhibitor against SARS-CoV-2: A Computational Study2020-11-08T08:11:01ZThe virus SARS-CoV-2 has created a situation of global emergency all over the world from the last few months. We are witnessing a helpless situation due to COVID-19 as no vaccine or drug is effective against the disease. In the present study, we have tested the applicability of some combination drugs against COVID-19. We have tried to understand the mechanism of action of some repurposed drugs: Favipiravir (F), Hydroxychloroquine (H) and Oseltamivir (O). The ADME analysis have suggested strong inhibitory possibility of F, H, O combination towards receptor protein of $3CL^{pro}$ of SARS-CoV-2 virus. The strong binding affinity, number of hydrogen bond interaction between inhibitor, receptor and lower inhibition constant computed from molecular docking validated the better complexation possibility of F+H+O: $3CL^{pro}$ combination. Various thermodynamical output from Molecular dynamics (MD) simulations like potential energy ($E_g$), temperature (T), density, pressure, SASA energy, interaction energies, Gibbs free energy ($ΔG_{bind}$) etc., also favored the complexation between F+H+O and CoV-2 protease. Our In-Silico results have recommended the strong candidature of combination drugs Favipiravir, Hydroxychloroquine and Oseltamivir as a potential lead inhibitor for targeting SARS-CoV-2 infections.2020-11-08T08:11:01ZCandidature of combination drugs Favipiravir, Hydroxychloroquine and Oseltamivir as a potential lead inhibitor for targeting SARS-CoV-2 infections is established PoojaPapia Chowdhuryhttp://arxiv.org/abs/2011.05321v1Spectral Kinetic Modeling and Long-term Behavior Assessment of Arthrospira platensis Growth in Photobioreactor under Red (620 nm) Light Illumination2020-11-07T14:47:21ZThe ability to cultivate the cyanobacterium Arhtrospira platensis in artificially lightened photobioreactors using high energetic efficiency (quasi-monochromatic) red LED was investigated. In order to reach the same maximal productivities as with the polychromatic lightening control conditions (red + blue, P/2e- = 1.275), the need to work with an optimal range of wavelength around 620 nm was first established on batch and continuous cultures. The long-term physiological and kinetic behavior was then verified in a continuous photobioreactor illuminated only with red (620 nm) LED, showing that the maximum productivities can be maintained over 30 residence times with only minor changes in the pigment content of the cells corresponding to a well-known adaptation mechanism of the photosystems, but without any effect on growth and stoichiometry. For both poly and monochromatic incident light inputs, a predictive spectral knowledge model was proposed and validated for the first time, allowing the calculation of the kinetics and stoichiometry observed in any photobioreactor cultivating A. platensis, or other cyanobacteria if the parameters were updated. It is shown that the photon flux (with a specified wavelength) must be used instead of light energy flux as a relevant control variable for the growth. The experimental and theoretical results obtained in this study demonstrate that it is possible to save the energy consumed by the lightening device of photobioreactors using red LED, the spectral range of which is defined according to the action spectrum of photosynthesis. This appears to be crucial information for applications in which the energy must be rationalized, as it is the case for life support systems in closed environments like a permanent spatial base or a submarine.2020-11-07T14:47:21ZBiotechnology Progress, 2009, 25, 151-162Bérangère FargesCéline LarocheJean-François CornetClaude-Gilles Dussap10.1021/bp.95http://arxiv.org/abs/2011.05320v1A Simple and Reliable Formula for Assessment of Maximum Volumetric Productivities in Photobioreactors2020-11-07T14:39:26ZThis paper establishes and discusses the consistency and the range of applicability of a simple, but general and predictive analytical formula, enabling to easily assess the maximum volumetric biomass growth rates (the productivities) in several kinds of photobioreactors with more or less 15 percents of deviation. Experimental validations are performed on photobioreactors of very different conceptions and designs, cultivating the cyanobacterium Arthrospira platensis, on a wide range of volumes and hemispherical incident light fluxes. The practical usefulness of the proposed formula is demonstrated by the fact that it appears completely independent of the characteristics of the material phase (as the type of reactor, the kind of mixing, the biomass concentration), according to the first principle of thermodynamics and to the Gauss-Ostrogradsky theorem. Its ability to give the maximum (only) kinetic performance of photobioreactors cultivating many different photoautotrophic strains (cyanobacteria, green algae, eukaryotic microalgae) is theoretically discussed but experimental results are reported to a future work of the authors or to any other contribution arising from the scientific community working in the field of photobioreactor engineering and potentially interested by this approach.2020-11-07T14:39:26ZBiotechnology Progress, 25, 2009, 424-435Jean-François CornetClaude-Gilles Dussap10.1002/btpr.138http://arxiv.org/abs/1908.06746v5Maize Yield and Nitrate Loss Prediction with Machine Learning Algorithms2020-11-06T18:18:11ZPre-season prediction of crop production outcomes such as grain yields and N losses can provide insights to stakeholders when making decisions. Simulation models can assist in scenario planning, but their use is limited because of data requirements and long run times. Thus, there is a need for more computationally expedient approaches to scale up predictions. We evaluated the potential of five machine learning (ML) algorithms as meta-models for a cropping systems simulator (APSIM) to inform future decision-support tool development. We asked: 1) How well do ML meta-models predict maize yield and N losses using pre-season information? 2) How many data are needed to train ML algorithms to achieve acceptable predictions?; 3) Which input data variables are most important for accurate prediction?; and 4) Do ensembles of ML meta-models improve prediction? The simulated dataset included more than 3 million genotype, environment and management scenarios. Random forests most accurately predicted maize yield and N loss at planting time, with a RRMSE of 14% and 55%, respectively. ML meta-models reasonably reproduced simulated maize yields but not N loss. They also differed in their sensitivities to the size of the training dataset. Across all ML models, yield prediction error decreased by 10-40% as the training dataset increased from 0.5 to 1.8 million data points, whereas N loss prediction error showed no consistent pattern. ML models also differed in their sensitivities to input variables. Averaged across all ML models, weather conditions, soil properties, management information and initial conditions were roughly equally important when predicting yields. Modest prediction improvements resulted from ML ensembles. These results can help accelerate progress in coupling simulation models and ML toward developing dynamic decision support tools for pre-season management.2019-08-14T18:43:24ZEnvironmental Research Letters 14(12) (2019) 124026Mohsen ShahhosseiniRafael A. Martinez-FeriaGuiping HuSotirios V. Archontoulis10.1088/1748-9326/ab5268