https://arxiv.org/api/U2AS6mohbMbc6DR1BTzBvotz7Ns2026-06-18T23:02:51Z159643515http://arxiv.org/abs/2309.03425v1Exponential Cell Division and Allometric Scaling in Metabolic Ecology2023-09-07T01:04:34ZOne of the most fundamental rules in metabolic ecology is the allometric equation, which is a power-law scaling that describes the connection between body measurements and body size. The biological dynamics of this essentially empirical allometric equation, however, have yet to be properly addressed in cell level. In order to fill the gap between biological process in cell level and allometric scaling in metabolic ecology, we simply assumed a cell bipartition without limitation, and then exponential cells increased during their lifetime. Two synchronous exponential increasing could generate a power-law scaling between body mass and an organ's weight. And the power-law scaling between body mass and metabolic rate may also be obtained by substituting an organ's weight with the weight of erythrocytes. Based on the same assumption, the dynamic of cell proliferation reveal a complex exponential scaling between body mass and longevity rather than the previously reported power-law scaling. In other words, there is a quadratic relationship between longevity and logarithmic form of body mass. In these relationships, all parameters can be explained by indices in cell division and embryo.2023-09-07T01:04:34ZJia-Xu HanZhuangdong BaiRui-Wu Wang10.1016/j.biosystems.2024.10519http://arxiv.org/abs/2309.02598v1The SLED (Shelf Life Expiration Date) Tracking System: Using Machine Learning Algorithms to Combat Food Waste and Food Borne Illnesses2023-09-05T21:45:47ZThe issue of food waste is a major problem contributing to the emission of greenhouse gases into the environment in addition to causing illness in humans. This research aimed to develop a correlation between the amount of time until a food spoiled and dates on food labels in conjunction with sensory observations. Sensory observations are more accurate as they are immediate observations that are specific to the food. This experiment observed bananas, bread, milk, eggs, and leafy greens over a period of time using characteristics specific to the food to quantify food spoilage. It was shown that the actual time until spoilage for all foods was longer than that of the best by date and that sensory observations proved to be a more accurate factor in determining spoilage. From this data, a machine learning algorithm was trained to predict if food was spoiled or not, in addition to the number of days until spoilage. This was presented to the consumer as an app, where the user can track foods and are reminded to check on them to prevent wastage. In addition, the experimental procedures were incorporated into a test kit for the consumer to take instructed observations to assess the spoilage of their food, which are then entered into the app to improve the algorithm. This paper discusses the individual effects of sensorial observations on each food and examines the shifting of consumer habits through an app and test kit to combat environmental consequences of food waste.2023-09-05T21:45:47ZSrilekha Mamidalahttp://arxiv.org/abs/2211.11808v2Challenges and perspectives in computational deconvolution of genomics data2023-09-02T16:51:48ZDeciphering cell type heterogeneity is crucial for systematically understanding tissue homeostasis and its dysregulation in diseases. Computational deconvolution is an efficient approach estimating cell type abundances from a variety of omics data. Despite significant methodological progress in computational deconvolution in recent years, challenges are still outstanding. Here we enlist four significant challenges related to computational deconvolution, from the quality of the reference data, generation of ground truth data, limitations of computational methodologies, and benchmarking design and implementation. Finally, we make recommendations on reference data generation, new directions of computational methodologies and strategies to promote rigorous benchmarking.2022-11-21T19:18:06ZLana X. GarmireYijun LiQianhui HuangChuan XuSarah TeichmannNaftali KaminskiMatteo PellegriniQuan NguyenAndrew E. Teschendorffhttp://arxiv.org/abs/1609.09421v6Physical mechanisms influencing life origin and development. Physical-biochemical paradigm of Life2023-09-02T15:22:00ZThe present view of biological phenomena is based on a biochemical paradigm that development of living organisms is defined by information stored in a molecular form as some genetic code. However, new discoveries indicate that biological phenomena cannot be confined to a biochemical realm alone, but are also influenced by physical mechanisms. These mechanisms work at cellular, organ and whole organism spatial levels. They impose uniquely defined constraints on distribution of nutrients between biomass synthesis and maintenance of existing biomass, thus influencing the composition of biochemical reactions, their successive change and irreversibility during the organismal life cycle. Mathematically, such a growth mechanism is represented by a growth equation. Using this equation, we introduce growth models, show their adequacy to experimental data, and discover two types of division mechanisms, examining growth of unicellular organisms Amoeba, S. pombe, E. coli, B. subtilis, Staphylococcus. Also, on the basis of the growth equation, we find different metabolic characteristics of these organisms. For instance, it was shown that in logarithmic coordinates the values of their metabolic allometric exponents are located on a straight line. This fact has important implications with regard to evolutionary process of organisms within a food chain, considered as a single system. High adequateness of obtained results to experimental data, from different perspectives, as well as excellent compliance with previously proven more particular knowledge, and with general criteria for validation of scientific truths, proves validity of the introduced general growth mechanism and the growth equation. Taken together, the obtained results set solid grounds for introduction of a more comprehensive physical-biochemical paradigm of Life origin, development and evolution.2016-09-29T16:45:49Z49 pages, 8 figures, 1 table. Mathematical derivations are presented with more intermediate transformationsBiophysical Reviews and Letters, 2023, https://www.worldscientific.com/doi/epdf/10.1142/S1793048023500030Yuri K. Shestopaloff10.1142/S1793048023500030http://arxiv.org/abs/2309.00866v1Tutorial: a priori estimation of sample size, effect size, and statistical power for cluster analysis, latent class analysis, and multivariate mixture models2023-09-02T08:48:00ZBefore embarking on data collection, researchers typically compute how many individual observations they should do. This is vital for doing studies with sufficient statistical power, and often a cornerstone in study pre-registrations and grant applications. For traditional statistical tests, one would typically determine an acceptable level of statistical power, (gu)estimate effect size, and then use both values to compute the required sample size. However, for analyses that identify subgroups, statistical power is harder to establish. Once sample size reaches a sufficient threshold, effect size is primarily determined by the number of measured features and the underlying subgroup separation. As a consequence, a priory computations of statistical power are notoriously complex. In this tutorial, I will provide a roadmap to determining sample size and effect size for analyses that identify subgroups. First, I introduce a procedure that allows researchers to formalise their expectations about effect sizes in their domain of choice, and use this to compute the minimally required number of measured variables. Next, I outline how to establish the minimum sample size in subgroup analyses. Finally, I use simulations to provide a reference table for the most popular subgroup analyses: k-means, Ward agglomerative hierarchical clustering, c-means fuzzy clustering, latent class analysis, latent profile analysis, and Gaussian mixture modelling. The table shows the minimum numbers of observations per expected subgroup (sample size) and features (measured variables) to achieve acceptable statistical power, and can be readily used in study design.2023-09-02T08:48:00ZCode and data: https://github.com/esdalmaijer/cluster_power_tutorialEdwin S Dalmaijerhttp://arxiv.org/abs/2308.07976v2Mathematical modeling of the treatment response of resection plus combined chemotherapy and different types of radiation therapy in a glioblastoma patient2023-09-01T21:44:45ZBackground: Gliomas are the most common brain tumors, which vary from low to high-grade. Despite the improvements in imaging techniques in the last decade, all parts of the tumor are not visible in these images, due to having a threshold of detection often lower than most of the tumor. Method: We simulated a brain domain to model heterogeneous growth plus gross total resection following concurrent chemo- and radiation therapy and adjuvant chemotherapy using temozolomide for a patient, diagnosed with glioblastoma, for different radiobiological alpha parameter as high, medium, and low sensitivity. The extent of difference in the result of treatment, area of the tumor, and survival time relating to those sensitivity parameters were shown. Moreover, based on the threshold of detection of MRI (T1Gd), the area of the tumor visible to this imaging technique was simulated. Furthermore, the extent of difference in the result of treatment for both conventional and hyperfractionated radiotherapy was investigated. Conclusion: The survival time of patient was increased by 2 months and more than 3 months at the lowest and highest sensitivity of radiation therapy, respectively.The result showed hyperfractionated radiotherapy was more effective than conventional radiotherapy in reducing the concentration of cancerous cells,as hyperfractionated method allows administration of higher total dose.2023-08-15T18:26:10Z10 pagesFarshad SamadifamEhsan Ghafourianhttp://arxiv.org/abs/2309.00389v1Building and Managing a Tropical Fish Facility: A Do-It-Yourself Guide2023-09-01T11:06:10ZAt the core of most research in zoological disciplines, ranging from developmental biology to genetics to behavioral biology, is the ability to keep animals in captivity. While facilities for traditional model organisms often benefit from well-established designs, construction of a facility for less commonly studied organisms can present a challenge. Here, we detail the process of designing, constructing, and operating a specialized 10,000-liter aquatic facility dedicated to housing cichlid fishes for research purposes. The facility, comprising 42 aquaria capable of division into up to 126 compartments, a flow-through rack for juveniles, egg tumblers for eggs and embryos, and a microinjection setup, provides a comprehensive environment for all life stages of cichlid fishes. We anticipate that a similar design can be also used also for other tropical teleost fishes. This resource is designed to promote increased efficiency and success in cichlid fish breeding and research, thereby offering significant insights for aquatic research labs seeking to build or optimize their own infrastructures.2023-09-01T11:06:10Z14 pages, 9 figures, 2 tablesClaudius F. KratochwilMuktai KuwalekarJan HaegeNidal Karagichttp://arxiv.org/abs/2301.09106v2The state of quantum computing applications in health and medicine2023-08-23T12:39:27ZMedicine, including fields in healthcare and life sciences, has seen a flurry of quantum-related activities and experiments in the last few years (although biology and quantum theory have arguably been entangled ever since Schrödinger's cat). The initial focus was on biochemical and computational biology problems; recently, however, clinical and medical quantum solutions have drawn increasing interest. The rapid emergence of quantum computing in health and medicine necessitates a mapping of the landscape. In this review, clinical and medical proof-of-concept quantum computing applications are outlined and put into perspective. These consist of over 40 experimental and theoretical studies. The use case areas span genomics, clinical research and discovery, diagnostics, and treatments and interventions. Quantum machine learning (QML) in particular has rapidly evolved and shown to be competitive with classical benchmarks in recent medical research. Near-term QML algorithms have been trained with diverse clinical and real-world data sets. This includes studies in generating new molecular entities as drug candidates, diagnosing based on medical image classification, predicting patient persistence, forecasting treatment effectiveness, and tailoring radiotherapy. The use cases and algorithms are summarized and an outlook on medicine in the quantum era, including technical and ethical challenges, is provided.2023-01-22T11:53:40ZFlöther, F. (2023). The state of quantum computing applications in health and medicine. Research Directions: Quantum Technologies, 1, E10Frederik F. Flöther10.1017/qut.2023.4http://arxiv.org/abs/2308.09379v1Examination of Some Nut Traits and Release From Dormancy Along With Germination Capacity in Some Bitter Almond Genotypes2023-08-18T08:15:07ZThis study was conducted at College of Agricultural Engineering Sciences, University of Sulaimani, Kurdistan Region-Iraq so as to investigate some nut traits in 10 bitter almond genotypes, capacity of them to release from dormancy and finally germination ability. Nut traits were calculated, and stratified in a sand medium at 6 C in a refrigerator for 55 days, then they were sown in fine sand on August 22, 2021 for 29 days to calculate germination percentage. There were great discrepancies among genotypes in nut traits. Nut length was between (23.66-32.73 mm), nut width (18.77-21.84 mm), nut size (3.16-4.26 cm3), nut weight (2.67-4.13 g), kernel weight (0.6-0.99 g), shell weight (1.94-3.27 g) and shell thickness (2.31-3.37 mm). The results of release from dormancy and calculation of germination percentage trials showed that the highest nut numbers from G6 (100%), G4 (86.11%) and G2 (65.22%) were released from dormancy and the same genotypes gave the best germination percentage, particularly G6 and G2 both gave (73.33%) germination. Depending on the results of release percentage from dormancy and germination percentage, G6 and G2 along with G4 were the best genotypes.2023-08-18T08:15:07ZAnwar Mohammed RaoufKocher Omer SalihAram Akram Mohammad10.25130/tjas.21.4.4http://arxiv.org/abs/2005.05656v9Life's mechanism2023-08-08T09:28:34ZThe multifarious internal workings of organisms are difficult to reconcile with a single feature defining a state of being alive. Indeed, definitions of life rely on emergent properties (growth, capacity to evolve, agency) only symptomatic of intrinsic functioning. Empirical studies demonstrate that biomolecules including ratcheting or rotating enzymes and ribozymes undergo repetitive conformation state changes driven either directly or indirectly by thermodynamic gradients. They exhibit disparate structures, but govern processes relying on directional physical motion (DNA transcription, translation, cytoskeleton transport) and share the principle of repetitive uniplanar conformation changes driven by thermodynamic gradients, producing dependable unidirectional motion: heat engines exploiting thermodynamic disequilibria to perform work. Recognition that disparate biological molecules demonstrate conformation state changes involving directional motion, working in self-regulating networks, allows a mechanistic definition: life is a self-regulating process whereby matter undergoes cyclic, uniplanar conformation state changes that convert thermodynamic disequilibria into directed motion, performing work that locally reduces entropy. Living things are structures including an autonomous network of units exploiting thermodynamic gradients to drive uniplanar conformation state changes that perform work. These principles are independent of any specific chemical environment, and can be applied to other biospheres.2020-05-12T10:05:51Z9 pagesSimon Piercehttp://arxiv.org/abs/2308.03198v1Re-imagining the Future of Forest Management -- An Age-Dependent Approach towards Harvesting2023-08-06T19:52:41ZFacing the drastic climate changes, current strategies for enhancing carbon dioxide stocks need to be thoroughly honed. To address the problem, we first built a carbon sequestration growth model driven by growth rate dependency (GRDM). We abstracted the carbon cycling system into the process of photosynthesis, the humidity fluctuation, and the original storage of carbon in the trees. In the photosynthesis model, we considered various factors, including transition rate of absorption and organic matter production. We also designed an Economic Return Evaluation Model (EREM) to estimate the optimal distribution of trees in the forest based on the utility function. Maximizing the utility brought by the amount of carbon storage, we derived the equation for profit optimization with the constraints of total economic expenses allowed. To assess its performance, we took an object-oriented approach, simulated an ideal forest by placing instances of trees and plotted a time-dependent forest composition graph. After proper normalization of climate and economic data, we also make predictions for 169 worldwide forest-covered countries. Our model further suggests high sensitivity and robustness with a similar trend of overall utility when environmental aridity or proportion of harvested woods are varied. Finally, we apply the model to Georgia temperate deciduous forest, and we evaluate the carbon storage ability to adjust the Red Spruce based on available biological literature research. We recognize that while the model is preliminary in its failure to identify a diverse array of variables, it has encapsulated key features of idealized forests.2023-08-06T19:52:41ZShuyang BianYuanyuan XieFlora Zhanghttp://arxiv.org/abs/2308.00717v1The Study and Optimization Of Production/Fermentation Processes In Biofuel Production2023-08-01T01:13:10ZThe production process involved in the creation of biofuels consists of a number of operations and steps that require a meticulous understanding of the parameters and metrics. The production techniques again differ depending on the pre-treatment systems, source material, the methods used for extraction, types of nutrients used, cell cultures employed, time undertaken and temperature. Due to the strategic and crucial role that bioethanol holds in supporting the energy demands of the future, it becomes important to run such processes to a highly optimized extent. One of the frontiers of leading such optimized designs is by studying the data from the production processes, formulating design experiments from said data and correlating the results with the parameters using analytical tools. While the case examples analyzed relate to bioethanol mostly, an additional analysis has been performed for data on biodiesel. Coupled with confirmatory methods such as Principal Component Analysis, researchers can help narrow down the extent or degree to which the parameters affect the final outcome and even configure inputs that may not play a definitive role in greater outputs. The project first tackles through some conventional case studies involving biofuel production using an FIS(Fuzzy Interface System) and provides certain insights into the ways in which fuel yields can be enhanced depending on the particular cases. For the purpose of analysis, tools such as MATLAB, Python and WEKA have been employed. Python and WEKA have been used extensively in building principal component analysis reviews for the purpose of this project while MATLAB has been used for building the FIS models.2023-08-01T01:13:10ZAmardeep Singhhttp://arxiv.org/abs/2307.16283v1A critical examination of crop-yield data for vegetables, maize and Tea for commercialized Sri Lankan biofilm biofertilizers2023-07-30T17:39:00ZWith increasing global interest in microbial methods for agriculture, the commercialization of biofertilizers in Sri Lanka is of general interest. The use of a biofilm-biofertilizer (BFBF) commercialized in Sri Lanka is claimed to reduce chemical fertilizer (CF) usage by ~50 per cent while boosting harvest by 20-30 per cent. Many countries have explored the potential of biofilm biofertilizers, but have so far found mixed results. Here we review this BFBF commercialized in Sri Lanka and approved for nation-wide use there. We show in detail that the improved yields claimed for this BFBF fall within the uncertainties (error bars) of the harvest. Theoretical models that produce a seemingly reduced CF scenario with an "increase" in harvests, although this is in fact not so, are presented. While BFBF usage seems to improve soil quality in certain respects, the currently available BFBF promoted in Sri Lanka has negligible impact on crop yields. We also briefly consider the potential negative effects of large-scale adoption of microbial methods.2023-07-30T17:39:00Z19 pages, figures and tablesM. W. C. Dharma-wardanaNRC CanadaParakrama WaidyanathaK. A. RenukaD. Sumith de S. AbeysiriwardenaBuddhi Marambehttp://arxiv.org/abs/2307.15228v1Integrative AI-Driven Strategies for Advancing Precision Medicine in Infectious Diseases and Beyond: A Novel Multidisciplinary Approach2023-07-27T23:12:34ZPrecision medicine, tailored to individual patients based on their genetics, environment, and lifestyle, shows promise in managing complex diseases like infections. Integrating artificial intelligence (AI) into precision medicine can revolutionize disease management. This paper introduces a novel approach using AI to advance precision medicine in infectious diseases and beyond. It integrates diverse fields, analyzing patients' profiles using genomics, proteomics, microbiomics, and clinical data. AI algorithms process vast data, providing insights for precise diagnosis, treatment, and prognosis. AI-driven predictive modeling empowers healthcare providers to make personalized and effective interventions. Collaboration among experts from different domains refines AI models and ensures ethical and robust applications. Beyond infections, this AI-driven approach can benefit other complex diseases. Precision medicine powered by AI has the potential to transform healthcare into a proactive, patient-centric model. Research is needed to address privacy, regulations, and AI integration into clinical workflows. Collaboration among researchers, healthcare institutions, and policymakers is crucial in harnessing AI-driven strategies for advancing precision medicine and improving patient outcomes.2023-07-27T23:12:34ZGhizal fatimaRisala H. AllamiMaitham G. Yousifhttp://arxiv.org/abs/2307.14806v1Prevalence and Associated Factors of Human Papillomavirus Infection among Iraqi Women2023-07-27T12:25:42ZHuman papillomavirus (HPV) is a significant public health concern, as it is a leading cause of cervical cancer in women. However, data on the prevalence of HPV infection among Iraqi women is scarce. This study aimed to estimate the prevalence of HPV infection and its associated factors among Iraqi women aged 15-50 attending health centers. In this cross-sectional study, 362 female participants aged 15-50 were recruited from health centers in Iraq. Serological tests were used to screen for HPV infection. Sociodemographic information, obstetric history, and contraceptive use were collected. Pap smears were performed to assess cervical changes related to HPV infection. Of the 362 participants, 65 (17.96%) tested positive for HPV. The majority of HPV-positive women were aged 30-35 years, housewives, and belonged to lower social classes. Among HPV-positive women, 30% had abnormal Pap smears, with 55% diagnosed with cervical intraepithelial neoplasia grade 1 (CIN1), 25% with CIN2, and 15% with CIN3. Biopsy confirmed the diagnosis in 5% of cases. No significant association was found between HPV infection and contraceptive use. Most HPV-positive women were multiparous. This study reveals a considerable prevalence of HPV infection among Iraqi women attending health centers, particularly in the age group of 30-35 years and among housewives. These findings highlight the need for targeted public health interventions to increase HPV awareness, promote regular screening, and improve access to healthcare services for women, especially those from lower social classes. Further research is warranted to better understand the factors contributing to HPV transmission in Iraq and to develop effective prevention strategies.2023-07-27T12:25:42ZMaitham G. YousifFadhil G. Al-AmranAlaa M. SadeqNasser Ghaly Yousif