Characterization of cell division control strategies through continuous rate models

2019-05-31T01:50:49Z

Recent experiments have supported the Adder model for E. coli division control. This model posits that bacteria grow, on average, a fixed size before division. It also predicts decorrelation between the noise in the added size and the size at birth. Here we use new experiments and a theoretical approach based on continuous rate models to explore deviations from the adder strategy, specifically, the division control of E. coli growing with glycerol as carbon source. In this medium, the division strategy is sizer-like, which means that the added size decreases with the size at birth. We found that in a sizer-like strategy the mean added size decreases with the size at birth while the noise in added size increases. We discuss possible molecular mechanisms underlying this strategy, and propose a general model that encompasses the different division strategies.

Cumulative labelling with thymidine analogues when the steady-state assumption is violated

2019-05-29T12:15:56Z

We present modelling results that examine the consequences of implementing cumulative labelling with thymidine analogues, to estimate the cell cycle time and growth fraction of dividing cells, when the steady-state assumption is violated. We fix the value of the cell cycle time a priori and examine whether cumulative labelling can reproduce this value. We find that the cumulative labelling technique systematically overestimates the growth fraction and cell cycle time in non-steady cell populations. Our results suggest an explanation for discrepancies in experimental measurements of oligodendrocyte precursor cell properties using cumulative labelling. These results also emphasise the utility of using computational models to determine what violating the assumptions of experimental techniques would look like in the laboratory before experiments are undertaken.

Pulling in models of cell migration

2019-05-27T21:02:04Z

There are numerous scenarios in which populations of cells migrate in crowded environments. Typical examples include wound healing, cancer growth and embryo development. In these crowded environments cells are able to interact with each other in a variety of ways. These include excluded volume interactions, adhesion, repulsion, cell signalling, pushing and pulling. One popular way to understand the behaviour of a group of interacting cells is through an agent-based model (ABM). A typical aim of modellers using such represtations is to elucidate how the microscopic interactions at the cell-level impact on the macroscopic behaviour of the population. The complex cell-cell interactions listed above have also been incorporated into such models; all apart from cell-cell pulling. In this paper we consider this under-represented cell-cell interaction, in which an active cell is able to `pull' a nearby neighbour as it moves. We incorporate a variety of potential cell-cell pulling mechanisms into on- and off-lattice agent-based volume exclusion models of cell movement. For each of these agent-based models we derive a continuum partial differential equation which describes the evolution of the cells at a population-level. We study the agreement between the ABMs and the continuum, population-based models, and compare and contrast a range of ABMs (accounting for the different pulling mechanisms) with each other. We find generally good agreement between the ABMs and the corresponding continuum models that worsens as the agent-based models become more complex. Interestingly, we observe that the partial differential equations that we derive differ significantly, depending on whether they were derived from on- or off-lattice ABMs of pulling. This hints that it is important employ the appropriate ABM when representing pulling cell-cell interactions.

Mechanical interplay between cell shape and actin cytoskeleton organization

2019-05-23T17:55:00Z

We investigate the mechanical interplay between the spatial organization of the actin cytoskeleton and the shape of animal cells adhering on micropillar arrays. Using a combination of analytical work, computer simulations and in vitro experiments, we demonstrate that the orientation of the stress fibers strongly influences the geometry of the cell edge. In the presence of a uniformly aligned cytoskeleton, the cell edge can be well approximated by elliptical arcs, whose eccentricity reflects the degree of anisotropy of the cell's internal stresses. Upon modeling the actin cytoskeleton as a nematic liquid crystal, we further show that the geometry of the cell edge feeds back on the organization of the stress fibers by altering the length scale at which these are confined. This feedback mechanism is controlled by a dimensionless number, the anchoring number, representing the relative weight of surface-anchoring and bulk-aligning torques. Our model allows to predict both cellular shape and the internal structure of the actin cytoskeleton and is in good quantitative agreement with experiments on fibroblastoid (GD$β$1,GD$β$3) and epithelioid (GE$β$1, GE$β$3) cells.

The self-organised, non-equilibrium dynamics of spontaneous cancerous buds

2019-05-20T13:01:22Z

Tissue self-organization into defined and well-controlled three-dimensional structures is essential during development for the generation of organs. A similar, but highly deranged process might also occur during the aberrant growth of cancers, which frequently display a loss of the orderly structures of the tissue of origin, but retain a multicellular organization in the form of spheroids, strands, and buds. The latter structures are often seen when tumors masses switch to an invasive behavior into surrounding tissues. However, the general physical principles governing the self-organized architectures of tumor cell populations remain by and large unclear. In this work, we perform in-vitro experiments to characterize the growth properties of glioblastoma budding emerging from monolayers. Using a theoretical model and numerical tools here we find that such a topological transition is a self-organised, non-equilibrium phenomenon driven by the trade--off of mechanical forces and physical interactions exerted at cell-cell and cell-substrate adhesions. Notably, the unstable disorder states of uncontrolled cellular proliferation macroscopically emerge as complex spatio--temporal patterns that evolve statistically correlated by a universal law.

Effect of Replication Fork Dynamics on Escherichia coli Cell Size

2019-05-20T07:32:35Z

The variability in cell size of an isogenic population of Escherichia coli has been widely reported in experiment. The probability density function (PDF) of cell lengths has been variously described by exponential and lognormal functions. While temperature, population density and growth rate have all been shown to affect E. coli cell size distributions, and recent models have validated a link between growth rate and cell size through DNA replication, cell size variability is thought to emerge from growth rate variability. A mechanistic link that could distinguish the source of stochasticity, could improve our understanding of cell size regulation. Here, we have developed a population dynamics model of individual cell division based on the BCD, birth, chromosome replication and division model, with DNA replication based on the Cooper and Helmstetter (CH) multi-fork replication. In our model, stochasticity in the model arises solely from the dynamics of DNA replication forks. We model the forks as two-state systems: stalled and recovered. Our model predicts an increase in cell size variability with growth rate, consistent with previous experimental reports. We perturb the model to test the effect of increased replication fork (RF) stalling frequency, or uncoupling RF stalling from the cell-division machinery. Indeed, despite ignoring DNA and protein segregation asymmetry, the model can faithfully reproduce quantitative changes in cell size distributions. In our model, multi-fork replication produces multiplicative 'noise' and provides a mechanism linking growth rate and cell size variability.

Bacteria push the limits of chemotactic precision to navigate dynamic chemical gradients

2019-05-19T17:02:34Z

Ephemeral aggregations of bacteria are ubiquitous in the environment, where they serve as hotbeds of metabolic activity, nutrient cycling, and horizontal gene transfer. In many cases, these regions of high bacterial concentration are thought to form when motile cells use chemotaxis to navigate to chemical hotspots. However, what governs the dynamics of bacterial aggregations is unclear. Here, we use a novel experimental platform to create realistic sub-millimeter scale nutrient pulses with controlled nutrient concentrations. By combining experiments, mathematical theory and agent-based simulations, we show that individual \textit{Vibrio ordalii} bacteria begin chemotaxis toward hotspots of dissolved organic matter (DOM) when the magnitude of the chemical gradient rises sufficiently far above the sensory noise that is generated by stochastic encounters with chemoattractant molecules. Each DOM hotspot is surrounded by a dynamic ring of chemotaxing cells, which congregate in regions of high DOM concentration before dispersing as DOM diffuses and gradients become too noisy for cells to respond to. We demonstrate that \textit{V. ordalii} operates close to the theoretical limits on chemotactic precision. Numerical simulations of chemotactic bacteria, in which molecule counting noise is explicitly taken into account, point at a tradeoff between nutrient acquisition and the cost of chemotactic precision. More generally, our results illustrate how limits on sensory precision can be used to understand the location, spatial extent, and lifespan of bacterial behavioral responses in ecologically relevant environments.

Quantification of the morphological characteristics of hESC colonies

2019-05-17T14:11:44Z

The maintenance of the pluripotent state in human embryonic stem cells (hESCs) is critical for further application in regenerative medicine, drug testing and studies of fundamental biology. Currently, the selection of the best quality cells and colonies for propagation is typically performed by eye, in terms of the displayed morphological features, such as prominent/abundant nucleoli and a colony with a tightly packed appearance and a well-defined edge. Using image analysis and computational tools, we precisely quantify these properties using phase-contrast images of hESC colonies of different sizes (0.1 -- 1.1$\, \text{mm}^2$) during days 2, 3 and 4 after plating. Our analyses reveal noticeable differences in their structure influenced directly by the colony area $A$. Large colonies ($A > 0.6 \, \text{mm}^2$) have cells with smaller nuclei and a short intercellular distance when compared with small colonies ($A < 0.2 \, \text{mm}^2$). The gaps between the cells, which are present in small and medium sized colonies with $A \le 0.6 \, \text{mm}^2$, disappear in large colonies ($A > 0.6 \, \text{mm}^2$) due to the proliferation of the cells in the bulk. This increases the colony density and the number of nearest neighbours. We also detect the self-organisation of cells in the colonies where newly divided (smallest) cells cluster together in patches, separated from larger cells at the final stages of the cell cycle. This might influence directly cell-to-cell interactions and the community effects within the colonies since the segregation induced by size differences allows the interchange of neighbours as the cells proliferate and the colony grows. Our findings are relevant to efforts to determine the quality of hESC colonies and establish colony characteristics database.

Modeling cell migration regulated by cell-ECM micromechanical coupling

2019-05-16T18:03:48Z

Cell migration in fibreous extracellular matrix (ECM) is crucial to many physiological and pathological processes such as tissue regeneration, immune response and cancer progression. During migration, individual cells can generate active pulling forces via actin filament contraction, which are transmitted to the ECM fibers through focal adhesion complexes, remodel the ECM, and eventually propagate to and can be sensed by other cells in the system. The microstructure and physical properties of the ECM can also significantly influence cell migration, e.g., via durotaxis and contact guidance. Here, we develop a computational model for cell migration regulated by cell-ECM micro-mechanical coupling. Our model explicitly takes into account a variety of cellular level processes including focal adhesion formation and disassembly, active traction force generation and cell locomotion due to actin filament contraction, transmission and propagation of tensile forces in the ECM, as well as the resulting ECM remodeling. We validate our model by accurately reproducing single-cell dynamics of MCF-10A breast cancer cells migrating on collagen gels and show that the durotaxis and contact guidance effects naturally arise as a consequence of the cell-ECM micro-mechanical interactions considered in the model. Moreover, our model predicts strongly correlated multi-cellular migration dynamics, which are resulted from the ECM-mediated mechanical coupling among the migrating cell and are subsequently verified in {\it in vitro} experiments using MCF-10A cells. Our computational model provides a robust tool to investigate emergent collective dynamics of multi-cellular systems in complex {\it in vivo} micro-environment and can be utilized to design {\it in vitro} micro-environments to guide collective behaviors and self-organization of cells.

Getting a head start: the slime mold, Physarum polycephalum, tune foraging decision to motivational asymmetry when faced with competition

2019-05-16T05:41:02Z

Slime mould plasmodia can adjust their behaviour in response to chemical trails left by themselves and other Physarum plasmodia. This simple feedback process increases their foraging efficiency. We still do not know whether other factors influence plasmodium behaviour in realistic competition settings. Here we designed a competition experiment where two plasmodia had to find one food source in a common environment. As previously shown, the time it took plasmodia to find food depended on their hunger motivation. However, the time it took a plasmodium to start looking for food depended on its motivation and the motivation of its competitor. Plasmodia always initiated foraging quicker if they were in the presence of a competitor and the quickest if they were hungry and in the presence of a satiated competitor. The time it took to arrive to the food was not influenced by whether they were alone or with a competitor. Ultimately, this complex competition response benefited the hungry plasmodia as they had a 4:1 chance of finding the food first. The sensory ecology of Physarum polycephalum is more complex than previously thought and yields complex behaviour in a simple organism.

Modeling tumorspheres reveals cancer stem cell niche building and plasticity

2019-05-14T16:55:56Z

Cancer stem cells have been shown to be critical to the development of a variety of solid cancers. The precise interplay mechanisms between cancer stem cells and the rest of a tissue are still not elucidated. To shed light on the interactions between stem and non-stem cancer cell populations we develop a two-population mathematical model, which is suitable to describe tumorsphere growth. Both interspecific and intraspecific interactions, mediated by the microenvironment, are included. We show that there is a tipping point, characterized by a transcritical bifurcation, where a purely non-stem cell attractor is replaced by a new attractor that contains both stem and differentiated cancer cells. The model is then applied to describe the outcome of a recent experiment. This description reveals that, while the intraspecific interactions are inhibitory, the interspecific interactions stimulate growth. This can be understood in terms of stem cells needing differentiated cells to reinforce their niches, and phenotypic plasticity favoring the de-differentiation of differentiated cells into cancer stem cells. We posit that this is a consequence of the deregulation of the quorum sensing that maintains homeostasis in healthy tissues.

Bridging the gap between individual-based and continuum models of growing cell populations

2019-05-11T09:59:55Z

Continuum models for the spatial dynamics of growing cell populations have been widely used to investigate the mechanisms underpinning tissue development and tumour invasion. These models consist of nonlinear partial differential equations that describe the evolution of cellular densities in response to pressure gradients generated by population growth. Little prior work has explored the relation between such continuum models and related single-cell-based models. We present here a simple stochastic individual-based model for the spatial dynamics of multicellular systems whereby cells undergo pressure-driven movement and pressure-dependent proliferation.We show that nonlinear partial differential equations commonly used to model the spatial dynamics of growing cell populations can be formally derived from the branching random walk that underlies our discrete model. Moreover, we carry out a systematic comparison between the individual-based model and its continuum counterparts, both in the case of one single cell population and in the case of multiple cell populations with different biophysical properties. The outcomes of our comparative study demonstrate that the results of computational simulations of the individual-based model faithfully mirror the qualitative and quantitative properties of the solutions to the corresponding nonlinear partial differential equations. Ultimately, these results illustrate how the simple rules governing the dynamics of single cells in our individual-based model can lead to the emergence of complex spatial patterns of population growth observed in continuum models.

Finite response time in stripe formation by bacteria with density-suppressed motility

2019-05-10T15:00:13Z

Genetically engineered bacteria to increase the tumbling frequency of the run-and-tumble motion for the higher local bacterial density form visible stripe pattern composed of successive high and low density regions on an agar plate. We propose a model that includes a simplified regulatory dynamics of the tumbling frequency in individual cells to clarify the role of finite response time. We show that the time-delay due to the response dynamics results in the instability in a homogeneous steady state allowing a pattern formation. For further understanding, we propose a simplified two-state model that allows us to describe the response time dependence of the instability analytically. We show that the instability occurs at long wave length as long as the response time is comparable with the tumbling timescale and the non-linearity of the response function to the change of the density is high enough. The minimum system size to see the instability grows with the response time $τ$, proportional to $\sqrtτ$ in the large delay limit.

Reassessment of the basis of cell size control based on analysis of cell-to-cell variability

2019-05-08T15:24:25Z

Fundamental mechanisms governing cell size control and homeostasis are still poorly understood. The relationship between sizes at division and birth in single cells is used as a metric to categorize the basis of size homeostasis [1-3]. Cells dividing at a fixed size regardless of birth size (sizer) are expected to show a division-birth slope of 0, whereas cells dividing after growing for a fixed size increment (adder) have an expected slope of +1 [4]. These two theoretical values are, however, rarely experimentally observed. For example, rod-shaped fission yeast $\it{Schizosaccharomyces}$ $\it{pombe}$ cells, which divide at a fixed surface area [5, 6], exhibit a division-birth slope for cell lengths of 0.25$\pm$0.02, significantly different from the expected sizer value of zero. Here we investigate possible reasons for this discrepancy by developing a mathematical model of sizer control including the relevant sources of variation. Our results support $\it{pure}$ sizer control and show that deviation from zero slope is exaggerated by measurement of an inappropriate geometrical quantity (e.g., length instead of area), combined with cell-to-cell radius variability. The model predicts that mutants with greater errors in size sensing or septum positioning paradoxically appear to behave as better sizers. Furthermore, accounting for cell width variability, we show that pure sizer control can in some circumstances reproduce the apparent adder behaviour observed in $\it{E. coli}$. These findings demonstrate that analysis of geometric variation can lead to new insights into cell size control.

Physical limits to sensing material properties

2019-05-07T12:41:13Z

Constitutive relations describe how materials respond to external stimuli such as forces. All materials respond heterogeneously at small scales, which limits what a localized sensor can discern about the global constitution of a material. In this paper, we quantify the limits of such constitutional sensing by determining the optimal measurement protocols for sensors embedded in disordered media. For an elastic medium, we find that the least fractional uncertainty with which a sensor can determine a material constant $λ_0$ is approximately \begin{equation*} \frac{δλ_0}{λ_0 } \sim \left( \frac{Δ_λ }{ λ_0^2} \right)^{1/2} \left( \frac{ d }{ a } \right)^{D/2} \left( \frac{ ξ}{ a } \right)^{D/2} \end{equation*} for $a \gg d \gg ξ$, $λ_0 \gg Δ_λ^{1/2}$, and $D>1$, where $a$ is the size of the sensor, $d$ is its spatial resolution, $ξ$ is the correlation length of fluctuations in the material constant, $Δ_λ$ is the local variability of the material constant, and $D$ is the dimension of the medium. Our results reveal how one can construct microscopic devices capable of sensing near these physical limits, e.g. for medical diagnostics. We show how our theoretical framework can be applied to an experimental system by estimating a bound on the precision of cellular mechanosensing in a biopolymer network.