https://arxiv.org/api/JmVreeV55zZothU1sda+Lc4qZqU 2026-04-09T23:03:24Z 19607 300 15 http://arxiv.org/abs/2602.22541v1 2026-02-26T02:30:09Z

Large, 3D trapped ion crystals offer improved sensitivity in quantum sensing protocols, and are expected to be implemented as platforms in near-future experiments. However, numerical techniques used to study the laser cooling of such crystals are inefficient as the number of ions, $N$, in the crystal increases. Here we develop a powerful numerical framework to simulate laser cooling of up to $10^5$ ions stored in a Penning trap. We apply this framework to characterize and optimize the cooling of ellipsoidal 3D crystals. We document new pathways to enhanced cooling based on the addition of an axial component to the potential energy-dominated $\boldsymbol{E}\times\boldsymbol{B}$ modes. Furthermore, we observe greatly enhanced cooling of the perpendicular kinetic energy to below 1 mK in prolate ion crystals, enabling a simplified cooling beam setup for such crystals. We propose specific values of trap and laser beam parameters which lead to optimal cooling in a variety of examples. This work illustrates the feasibility of preparing large 3D crystals for high-sensitivity quantum science protocols, motivating their use in future experiments.

2026-02-26T02:30:09Z John Zaris Wes Johnson Athreya Shankar John J. Bollinger Allison L. Carter Daniel H. E. Dubin Scott E. Parker http://arxiv.org/abs/2602.20317v2 2026-02-26T01:13:38Z

Next-generation fusion facilities like ITER face a "data deluge," generating petabytes of multi-diagnostic signals daily that challenge manual analysis. We present a "signals-first" self-supervised framework for the automated extraction of coherent and transient modes from high-noise time-frequency data across a variety of sensors. We also develop a general-purpose method and tool for extracting coherent, quasi-coherent, and transient modes for fluctuation measurements in tokamaks by employing non-linear optimal techniques in multichannel signal processing with a fast neural network surrogate on fast magnetics, electron cyclotron emission, CO2 interferometers, and beam emission spectroscopy measurements from DIII-D. Results are tested on data from DIII-D, TJ-II, and non-fusion spectrograms. With an inference latency of 0.5 seconds, this framework enables real-time mode identification and large-scale automated database generation for advanced plasma control. Repository is in https://github.com/PlasmaControl/TokEye.

2026-02-23T20:03:10Z Nathaniel Chen Kouroche Bouchiat Peter Steiner Andrew Rothstein David Smith Max Austin Mike van Zeeland Azarakhsh Jalalvand Egemen Kolemen http://arxiv.org/abs/2602.22370v1 2026-02-25T20:07:12Z

Ultracold neutral plasmas provide a useful system for studying extreme parameter regimes plasma physics in an accessible laboratory setting. The parameter space of plasma physics can be characterized in part by coupling strength and degree of magnetization. The range of achievable strong coupling is determined in part by the lowest possible temperatures that can be achieved. This work examines the early-lifetime electron heating of moderately coupled, strongly magnetized plasmas. This heating is dominated by disorder-induced heating and heating due to Rydberg atom formation. By using experimentally informed simulations, it is found that disorder-induced heating has a large influence in electron temperature well into the plasma lifetime. Additionally, the dependence of the minimum achievable electron temperature on magnetization and initial electron energy is examined. In this work, we find electron temperatures as low as $0.52^{+.10}_{-.05}\ \mathrm{K}$ (for electron density, $n_{e}$, of $6.1 \times 10^{12}\ \mathrm{m^{-3}}$), which determines the maximum coupling strength for the measured experimental conditions.

2026-02-25T20:07:12Z 8 Pages, 5 figures Ryan C. Baker Bridget O'Mara Jacob L. Roberts http://arxiv.org/abs/2602.22177v1 2026-02-25T18:25:29Z

We assess runaway-electron (RE) generation in ITER disruptions mitigated by shattered pellet injection (SPI) using improved physics modelling in the 1D disruption simulation framework Dream. To this end, we extend Dream with four ITER-relevant physics models: (i) a reduced model for RE scrape- off associated with the vertical plasma motion, (ii) a semi-analytical plasmoid- drift model for material deposition, (iii) an adaptive hyper-resistive transport model to suppress unphysical thin-current channels during the current quench (CQ), and (iv) an updated Compton RE generation seed calculated for the new ITER tungsten first-wall design. We simulate full-current 15 MA L-mode (H26, non-nuclear) and H-mode (DTHmode24, nuclear) scenarios, and an intermediate- current 7.5 MA H-mode non-nuclear case, from realistic ITER inputs. Complete avoidance of a multi-MA RE beam is found to require a long pre-thermal quench (TQ) duration to thermalize the hot-tail electrons, high deuterium assimilation with limited neon, and a representative seed current comparable to a single RE in ITER. As previously found with lower fidelity setups [Vallhagen et al, Nucl. Fusion 64 (2024)], these conditions are met by staggered or low-Ne injections in H26, but are typically violated in DT H-mode when nuclear seeds are present. In addition to analyzing the effect of the new models, we investigate the role of the current spike associated with the TQ and importance of radial transport of runaways in the CQ. After incorporating these additional physical effects into a comprehensive disruption model and analyzing their impact, we present a representative ITER DT H-mode SPI scenario which provides a theoretically viable route to tolerable RE currents in ITER fusion power operation.

2026-02-25T18:25:29Z L. Votta F. J. Artola E. Nardon O. Vallhagen M. Hoppe http://arxiv.org/abs/2602.22172v1 2026-02-25T18:18:18Z

Laser wakefield acceleration (LWFA) can produce relativistic electron beams and various secondary particles in centimeter-long plasmas, making it a valuable particle source with important applications in many disciplines. In this work, we examine the effects of non-ideal transverse intensity and phase distribution of laser pulses on LWFA through both experimental measurements and particle-in-cell simulations. The complex transverse profile of the 75 TW laser pulses reduces the self-focused intensity in plasma compared with a transversely Gaussian laser. Furthermore, the sheath structure of the nonlinear plasma wake excited by realistic laser pulses is wider and more complicated than that of a Gaussian laser. These hinder the injection of the plasma electrons. As the laser pulse propagates through the plasma, its intensity profile gradually becomes elliptical and drives a plasma wake with a sharp sheath near the azimuths of the major axis, leading to an injection. When using a realistic laser profile in simulations, both the charge and energy of injected electrons closely match experimental results ($\sim200$ pC of charge and $\sim 200$ MeV peak energy), whereas the Gaussian laser simulations produce much higher charge ($\sim500$ pC). Our findings reveal the difference in injection dynamics between LWFA driven by non-ideal laser pulses and those driven by Gaussian pulses, and are useful for applications of LWFA which demand high-charge electron beams.

2026-02-25T18:18:18Z 11 pages, 10 figures Yuhui Xia Zhenan Wang Ziyao Tang Jianghao Hu Qianyi Ma Yuekai Chen Letian Liu Zhiyan Yang Hui Zhang Chenxu Wang Haoyang Lan Di Wu Xiuhong Yang Yixing Geng Yanying Zhao Xueqin Yan Xinlu Xu http://arxiv.org/abs/2602.22165v1 2026-02-25T18:14:29Z

The large-scale dynamics of most conventional space and astrophysical plasmas are predominantly governed by Alfvén modes, which are low-frequency magnetohydrodynamic modes existing in magnetized media. At scales smaller than the ion gyroscale or frequencies exceeding the ion cyclotron frequency, the Alfvén modes transform into kinetic-Alfvén or whistler modes that significantly contribute to plasma dynamics. However, this scenario reverses in non-neutral pair plasmas, such as those found in the magnetospheres of pulsars and magnetars, around rotating black holes and in their relativistic jets, as well as in certain laboratory plasmas. In these systems, the large-scale dynamics is governed by hybrid whistler-Alfvén modes, which transform into pure Alfvén modes at smaller scales. We derive the nonlinear equations that describe the dynamics of whistler-Alfvén modes in ultrarelativistic non-neutral magnetically dominated pair plasma and discuss the spectrum of turbulence governed by these equations.

2026-02-25T18:14:29Z 13 pages, 1 figure ApJ 998 (2026) 137 Stanislav Boldyrev Mikhail Medvedev 10.3847/1538-4357/ae30e1 http://arxiv.org/abs/2602.22064v1 2026-02-25T16:10:41Z

Collisions between electrons and radiating atoms broaden spectral absorption and emission lines in dense plasmas. High densities also introduce screening and pressure ionization effects that distort the wavefunctions of both bound and free electrons. In order to study how dense plasma effects influence the electron broadening of spectral lines, this paper incorporates electron wavefunctions from an average-atom (AA) model to calculate the line width of the B III $2p-2s$ transition at $T = 10$ eV for mass densities ranging from $ρ=10^{-4}-0.4$ g/cc. The calculation method uses the impact approximation, allowing the line width to be written in terms of electron-collision cross sections and an interference term. Compared to an otherwise identical calculation that uses Coulomb free wavefunctions, the AA method is found to modify both the cross sections and the resulting line width at sufficiently high density by introducing screening and pressure ionized bound states. Screening lowers the cross sections at low energies and near electron excitation thresholds, while pressure ionized bound states introduce resonances into the continuum. Thus, as the density increases, the relative line width between the AA and Coulomb calculations follows a general decrease because of screening, with sharp increases at various intervals due to pressure ionization. The AA results are also compared with a common approach to introduce screening through the interaction potential and reduced models that use the Bethe formula for the inelastic electron-collision cross sections.

2026-02-25T16:10:41Z Julian P. Kinney Stephanie B. Hansen Thomas A. Gomez Scott D. Baalrud http://arxiv.org/abs/2602.21710v1 2026-02-25T09:16:31Z

An extended formulation of out-of-time-ordered correlators (OTOCs), which quantify noncommutative operator growth and information scrambling in quantum many-body systems, is developed for turbulence dynamics as a representative of non-canonical Hamiltonian systems. Based on the Wigner-Weyl transform and the Moyal bracket formalism, the semiclassical limit of OTOC for turbulent plasmas governed by the Hasegawa-Mima equation is derived as an ensemble-averaged squared Lie-Poisson bracket between two chosen functionals of the turbulent fields. The classical-limit OTOC provides a quantitative measure of how a variational perturbation applied to one functional propagates across scales in the turbulent dynamics and how it affects another functional at a later time, thereby capturing scale-dependent or field-dependent transfer processes. In a quasilinear approximation with a strong zonal flow, we derive an inverse-square decay of the OTOC with the time lag, indicating an algebraic suppression of the zonal-mode response to perturbations of the non-zonal fields. This behavior is attributed to zonal-flow shearing, which rapidly scrambles the non-zonal perturbation toward higher wavenumbers, and consequently reduces the low-wavenumber non-zonal content that can feed back onto large-scale zonal modes.

2026-02-25T09:16:31Z 22pages in sigle column, 1 figure Motoki Nakata http://arxiv.org/abs/2602.22272v1 2026-02-25T08:48:12Z

This paper explores the thermodynamics of fluctuating polytropic processes and their connection to turbulence. It is shown that random fluctuations of polytropic processes produce a nonzero overall heating of a particle system, e.g., solar wind plasma flowing out through the heliosphere; while any nonturbulent heating can be thermodynamically described by typical nonfluctuating polytropic processes, turbulent heating can be thermodynamically described through fluctuating polytropic processes. First, we derive the expression of the overall process and find that polytropic fluctuations lead to heat entering the system even if the respective nonfluctuating process is adiabatic. The temperature of the solar wind plasma protons decreases with heliospheric distance less than the adiabatic cooling, again, similar to when heating enters the system; this subadiabatic cooling is proportional to the variance of the fluctuations. We derive the heliospheric radial profiles of the thermodynamic expressions of the polytropic index, temperature, and heating rates. Then, we show that the analytical profiles of heating of fluctuating polytropic processes and of turbulent heating are identical, suggesting that turbulence heats plasma particle populations by fluctuating their polytropic processes. We apply the thermodynamics of fluctuating polytropic processes to the energy transfer from pickup ions (PUIs) to solar wind plasma protons, and derive the analytical expressions of PUI turbulent and nonturbulent heating rates, which are well fitted to the respective observations. Finally, we apply the thermodynamic model to the radial profile of PUI energy transfer to the solar wind plasma protons, where we derive the portion of PUI turbulent vs. nonturbulent heating rates.

2026-02-25T08:48:12Z G. Livadiotis D. J. McComas http://arxiv.org/abs/2602.21571v1 2026-02-25T04:49:33Z

Effective tokamak disruption mitigation is crucial for ensuring the safety and integrity of fusion power reactors. Accurate collisional-radiative (CR) modeling of a radiative plasma is a critical component in predictive disruption mitigation design. In this paper, we focus on quasi-steady-state CR modeling applicable to the current quench phase of a tokamak disruption. We employ the ATOMIC collisional-radiative code from the Los Alamos suite and the newly developed Fusion Collisional-Radiative (FCR) code to model the atomic processes, providing high-fidelity data for radiative power loss, as well as average and effective charge states for hydrogen, helium, neon, and argon plasma species over a wide range of tokamak-relevant electron temperatures and electron densities. Fine-structure-resolved CR models are used for hydrogen and helium plasma species, while configuration-average CR models are implemented for neon and argon plasma species. The calculated values are compared with the superconfiguration CR model (FLYCHK) and the commonly used coronal equilibrium approximation to demonstrate the advantages and limitations of each model. To facilitate coupling of high-fidelity CR data to plasma simulation models, we represent the ATOMIC/FCR results over the relevant plasma parameter range using a smooth tensor product B-spline surface in electron temperature and electron density. This approach yields compact coefficient tables that can be evaluated efficiently while preserving spline smoothness across the domain. These data were previously used to examine ways to minimize runaway electrons in a tokamak current quench, and they are now made available in easy-to-use forms for community use and benchmarking.

2026-02-25T04:49:33Z 28 pages, 7 figures Prashant Sharma Christopher J. Fontes Dmitry V. Fursa Igor Bray Mark Zammit James Colgan Hyun-Kyung Chung Nathan Garland Xian-Zhu Tang http://arxiv.org/abs/2602.21151v2 2026-02-25T02:52:31Z

Understanding the locality of high-temperature plasma energy deposition on material surfaces in fusion reactors is critical for design. Here, we utilize the Gyrokinetic ElectroMagnetic turbulence including X-points (GEMX) simulation, together with SOLPS-ITER solutions for the background equilibrium electric field including drifts, to model the heat flux at the divertor plate and characterize the heat load width using realistic X-point geometry. We use a theory-based blobby transport model called the "Coherent Structure Transport" (CST) model to include the effect of plasma transport in the edge scrape-off layer. The CST model is extremely fast and can be used to quickly analyze any SOLPS-ITER solution. SOLPS-ITER provides the steady state, or equilibrium on which we superimpose blobby turbulence characterized by blob size, amplitude and frequency. We obtain the $1/B_p$ scaling of the heat load exponential decay width $λ_q$, in agreement with the Eich empirical scaling and with the Goldston heuristic theory. When including blobby turbulence in combination with the SOLPS-ITER electric field, we find a secondary peak in the heat flux radial profile, outwardly displaced from the strike point radius, with a relative amplitude that increases with the initial blob density. We describe the CST model in detail and provide initial investigations of the scaling of $λ_q$ and the secondary heat flux peak with blob size and amplitude.

2026-02-24T17:53:11Z Zhichen Feng James Myra Junyi Cheng Calder Haubrich Yang Chen Xinxing Ma Darin R. Ernst Scott Parker http://arxiv.org/abs/2602.21422v1 2026-02-24T22:49:36Z

Magnetic reconnection and turbulence are deeply intertwined in magnetohydrodynamic flows, yet how reconnection self-generates turbulence remains unclear. Using an ensemble of high-resolution three-dimensional direct numerical simulations of an unstable magnetised jet with an initially weak mean field, we demonstrate a self-sustained transition from laminar reconnection to fully developed turbulence in the absence of external forcing. We show that a three-dimensional current-sheet instability triggers stochastic reconnection, leading to persistent turbulent energy injection. Energy-budget analysis reveals that the coupling between the turbulent electromotive force and the magnetic mean shear dominates turbulent production, with magnetic fluctuations subsequently transferring energy to the kinetic field through a nonlinear cascade.

2026-02-24T22:49:36Z Nick Williams Alessandro De Rosis Alex Skillen http://arxiv.org/abs/2602.21375v1 2026-02-24T21:14:20Z

The Richtmyer-Meshkov instability (RMI) poses a major challenge in inertial confinement fusion (ICF) due to its role in mixing and performance degradation. We report the first experimental observation of passive freeze-out of RMI in a low-pressure surrogate regime; an instability stagnation effect induced without modifying the driving pressure pulse or the target surface geometry. Using additively manufactured sub-surface voids in a sinusoidal target, we convert a single shock into a sequence of weaker shocks that suppress instability growth upstream of the surface by over 70%. High-speed X-ray imaging and hydrodynamic simulations suggest that this suppression arises primarily from temporal shaping, with lesser contributions from spatial curvature and shock weakening. Our results demonstrate a driver-independent pathway for controlling shock-driven hydrodynamic instabilities relevant to ICF and other high energy density systems.

2026-02-24T21:14:20Z J. Strucka D. M. Sterbentz B. Lukic K. Mughal Y. Yao K. Marrow W. J. Schill C. F. Jekel D. A. White N. Asmedianov R. Grikshtas O. Belozerov S. Efimov J. Skidmore A. Rack Ya. E. Krasik J. L. Belof J. P. Chittenden S. N. Bland http://arxiv.org/abs/2602.21271v1 2026-02-24T15:55:38Z

The problem of scaling in isotropic magnetohydrodynamic (MHD) turbulence has remained unresolved, with competing predictions of $k^{-5/3}$ (Kolmogorov) and $k^{-3/2}$ (Iroshnikov-Kraichnan) scalings. In this paper, we address this long-standing controversy using high-resolution numerical simulations on $8192^2$ and $1536^3$ grids. We show that the total energy and cross helicity spectra are closer to $k^{-5/3}$ than $k^{-3/2}$. The fluxes and structure functions of the total energy and cross helicity also demonstrate robust support for Kolmogorov scaling. The magnetic energy shows $k^{-5/3}$ spectrum, but the kinetic energy exhibits $k^{-3/2}$ spectrum; the latter spectrum is due to the energy transfers from the magnetic field to the velocity field.

2026-02-24T15:55:38Z 5 figures in total, and 10 pages Manthan Verma Abhishek K. Jha Mahendra K. Verma http://arxiv.org/abs/2510.16243v3 2026-02-24T15:21:23Z

Balancing plasma performance and coil cost is a significant challenge when designing a stellarator power plant. Most current stellarator designs are produced by two-stage optimization: stage-1 for the equilibrium and stage-2 for a coil design that reproduces its magnetic configuration. Because few proxies connect both stages, two-stage optimization can produce plasmas that have high-quality physical properties but overly complex coils. In recent years, single-stage optimization is increasingly used to optimize the plasma and coils simultaneously, in order to improve the plasma-coil balance. However, all existing single-stage tools are specialized for filament coils, cannot model coil systems containing permanent magnets (PM) or dipole arrays, and remain challenged by numerical problems.The quasi-single-stage (QSS) optimization finds a middle-ground by integrating a coil optimization subproblem into stage-1 optimization. We present a flexible, differentiable coil complexity proxy based on the newly developed QUADCOIL coil optimization code. QUADCOIL is fast and can target realistic coil metrics and constraints that are unavailable to codes with comparable speed. We demonstrate the effectiveness and flexibility of the QUADCOIL proxy by presenting two QSS optimization studies. The first study produces a permanent magnet solution for the MUSE stellarator with 29% fewer magnets than previous solutions. The second study produces a coil solution for the ARIES-CS stellarator with approx 30% reductions in both peak and average coil force.

2025-10-17T22:19:19Z Lanke Fu Dario Panici Elizabeth Paul Alan Kaptanoglu Amitava Bhattacharjee