40% boost in extreme ultraviolet conversion efficiency via simultaneous dual-beam 2-μm laser irradiation

2026-06-06T08:16:27Z

Scaling extreme ultraviolet (EUV) source power for next-generation lithography demands higher conversion efficiency (CE) at reduced per-pulse energies. We demonstrated a 40% CE enhancement by simultaneous dual-beam irradiation of a planar Sn target with a 2090-nm, 20-ns Ho:YAG laser. Single-beam irradiation at 40 mJ yielded an EUV CE of 2.6%; splitting the same total energy equally into two beams of 20 mJ each - at identical peak intensity - raised the EUV CE to 3.6%, which was the highest reported for 2-μm-driven laser-produced plasma sources. The EUV source size (60-70 μm) and energetic-ion spectra were nearly identical across both configurations, confirming comparable plasma conditions. Because the scheme requires only passive beam splitting and scales readily to three or more beams, it offers a practical route toward multi-kW-class, energy-efficient EUV sources for high-NA and hyper-NA lithography.

Radiation damage to normal mammalian tissue in vivo with laser-driven protons at ultra-high instantaneous dose rate

2026-06-05T21:59:30Z

The differential sparing of normal tissues relative to tumor control observed at ultra-high dose rates, referred to as the FLASH effect, has recently gained considerable attention. The therapeutic advantages of FLASH radiotherapy are expected to be further amplified through the use of protons and ions, which enable precise dose deposition at tumor depth while minimizing irradiation of healthy tissues proximal and distal to the target. Nevertheless, the mechanism underlying this sparing effect remains poorly understood. Laser-driven proton accelerators are capable of delivering uniquely high instantaneous dose rates in ultrashort bunches. Here, we report the first in vivo investigation of normal tissue response to laser-driven proton irradiation, with controlled exposures to 8 MeV protons, delivering total doses up to 50 Gy at 2 Gy per laser shot. Our findings reveal a reduction in tissue swelling following laser-driven proton treatment compared with X-ray irradiations at conventional dose rates. RNA sequencing identified differential gene expression associated with immune and epidermal programs following laser-driven proton irradiations at two different dose levels.

A Deep Learning Approach to Describing the Plasma Sheath

2026-06-05T21:54:59Z

Despite their ubiquity, the rich physics present in a plasma sheath has inhibited the development of a generally applicable description of this critical region. The present study utilizes a physics-informed neural network (PINN) to evaluate a hierarchy of models of the plasma sheath. Unlike traditional deep learning methods, PINNs use the governing PDEs to constrain the predictions of a neural network, and thus do not require any experimental or simulation data to train. In this work, we utilize a PINN to identify the parametric solution to fluid models of different physics fidelity of the plasma sheath. While the offline training time of the PINN is often longer than a traditional solver, once trained, the PINN is able to efficiently predict the sheath profiles across a broad range of parameter regimes, thus yielding an effective surrogate of the plasma sheath.

Hybrid simulations of the proton beam instabilities in the young solar wind. The formation of hammerhead-like distributions

2026-06-05T20:57:00Z

Parker Solar Probe (PSP) observations in the young solar wind reveal new properties of both plasma particle velocity distributions (VDs) and associated electromagnetic (EM) wave fluctuations. The quasilinear (QL) kinetic theory of plasma wave instabilities has recently shown that new hammerhead (HH) proton distributions can be generated by the relaxation of proton beams through the instabilities of right-handed (RH) polarized waves. Such RH waves have indeed been reported in association with HH distributions. In this paper, new results from hybrid simulations of proton-beam-plasma systems with properties typical of those observed to excite EM-RH wave instabilities are presented. From the long-term evolution of these systems, it is found that beam relaxation is driven by instabilities and growing wave fluctuations, leading to HH-type features in the velocity distributions. The production of these features, as well as their prominence, depends on the magnetic power of the waves generated by the instabilities and, therefore, implicitly on the available free energy, quantified by the plasma beta parameter and the relative beam drift. The simulation results capture the self-consistent evolution of the instabilities and their nonlinear development. Linear theory, together with simulations, helps identify the nature of the unstable modes and the plasma conditions under which they arise. The good agreement with quasi-linear (QL) theory further indicates that it can serve as a computationally efficient complementary framework for interpreting the associated wave-particle interactions.

TokaMind: A Multi-Modal Transformer Foundation Model for Tokamak Plasma Dynamics

2026-06-05T15:10:07Z

We present TokaMind, to our knowledge the first open-source foundation model for tokamak plasma dynamics, based on a Multi-Modal Transformer (MMT) and pretrained on heterogeneous diagnostics from the publicly available MAST dataset. TokaMind supports multiple data modalities (time-series, 2D profiles, and videos) with different sampling rates, robust missing-signal handling, and efficient task adaptation via selectively loading and freezing four model components. To represent multi-modal signals, we use a lightweight fixed-basis Discrete Cosine Transform embedding (DCT3D) and provide a clean interface for alternative embeddings (e.g., Variational Autoencoders). We evaluate TokaMind on the recently introduced MAST benchmark TokaMark, which comprises 14 tasks with heterogeneous reconstruction and forecasting objectives. Our results show that fine-tuned TokaMind outperforms the strongest benchmark baseline on all but one task. Compared with training the same architecture from scratch under a matched epoch budget, warm-start adaptation is most beneficial on demanding downstream settings, including long-horizon forecasting and high-dimensional equilibrium objectives. These findings highlight the value of multi-modal pretraining for tokamak plasma dynamics and provide a practical, extensible foundation for future fusion modeling tasks. Training code and model weights are publicly available at github.com/UKAEA-IBM-STFC-Fusion-FMs/tokamind and huggingface.co/UKAEA-IBM-STFC, respectively.

Triggering physical plasmoids in forming current sheets: conditions and diagnostics

2026-06-05T14:42:08Z

We investigate the conditions for triggering the plasmoid instability in a dynamically forming current sheet in the resistive magnetohydrodynamic framework, using a pseudo-spectral code applied to the Orszag-Tang vortex at Lundquist number $S \sim 10^5$. Following García Morillo \& Alexakis (2025), we use the power spectrum of the current density $E_J(k)$, complemented by the vorticity spectrum $E_ω(k)$, to assess the convergence of our simulations, and show that this diagnostic remains valid even in the presence of physical plasmoids, allowing us to unambiguously distinguish them from spurious ones. We then show that physical plasmoids can be triggered in a well-resolved spectral simulation when three conditions are simultaneously met: a perturbation applied near the time of maximum current density, with amplitude above a critical threshold $\varepsilon_c \sim 10^{-5}$ for our numerical scheme, and with spectral content containing the unstable wavenumbers. These conditions are confirmed using continuous noise injection, which yields similar results at amplitudes one to two orders of magnitude lower. The resulting growth rates and plasmoid numbers are in good agreement with the theory of \citet{Comisso2017}. These results resolve the apparent paradox raised by García Morillo \& Alexakis (2025) and also clarify the role of numerical noise in the triggering of the plasmoid instability.

Impact of mechanical constraints on tokamak design and implications for high field power plants

2026-06-05T12:10:11Z

Two analytical models for sizing the toroidal field coils and central solenoid of a tokamak are developed within the D0FUS system code: a pedagogical thin-cylinder model and a refined thick-cylinder and winding packs model. The refined model shows good agreement with six reference machines and the MADE magnet design code. When the high-field design space is explored for DEMO-class power plants (2 GW of fusion power, Q = 40, tplateau = 2 h), pushing the peak field at the Toroidal Field (TF) coil conductor up to Bmax = 20 T, the radial build emerges as the dominant constraint: in fact, in the baseline wedging/316L configuration, no viable design can be found beyond 20 T, making alternative strategies necessary. The primary levers identified are high-strength steels (e.g CHSN01), alternative mechanical architectures (bucking, plug), and reductions of the effective Central Solenoid (CS) flux demand (for example through auxiliary heating during ramp-up), each carrying an impact of the same order of magnitude on the minimum feasible major radius. Secondary optimisations (conductor shape, radial grading) are shown to provide additional but more modest gains. When all favourable levers are combined (CHSN01, bucking, etc.), compact machines (R0 < 4 m) appear feasible. This suggests that, provided one accepts the associated risks of combining new approaches (CHSN01, bucking, etc.), high-temperature superconductors could unlock the path to compact electricity generating tokamaks.

Multi-kilohertz laser plasma acceleration driven by an industrial-grade Yb:YAG laser

2026-06-05T11:04:24Z

Laser plasma accelerators (LPAs) are a promising platform for compact radiation sources. For a wide range of applications, including radiotherapy, ultrafast electron diffraction and time-resolved imaging, stable operation at high repetition rates is essential in order to deliver competitive average particle flux. Here we demonstrate the first LPA driven by an industrial-grade ytterbium-doped yttrium aluminium garnet (Yb:YAG) laser, designed for high-average-power operation. The picosecond laser pulses are post-compressed in a multi-pass cell to 50 fs duration and used to drive the interaction. The electron accelerator is operated in burst mode, at repetition rates tuneable from 0.625 to 6.25 kHz, representing a substantial increase compared to the state-of-the-art. Across this range, the electron beam properties remain unchanged, with average charges of 10-12 pC per shot, divergences of 50-70 mrad, and Maxwellian-like spectra extending to a few MeV. Numerical simulations capture the key features of the experimental observations and indicate acceleration in the self-modulated regime, enabled by relativistic self-focusing in near-critical-density plasma. Combining industrial high-average-power laser technology with plasma-based acceleration, these results represent a key step toward scalable, compact high-repetition-rate electron sources for medical, imaging and industrial applications.

Asymptotic behavior of the shear flow reactivity enhancement effect

2026-06-05T07:04:12Z

Fusion reactivity is enhanced in the vicinity of strongly sheared flow due to the tendency of fast ions near the Gamow peak to travel long distances between collisions, thereby sometimes crossing gradients in the background flow and attaining a velocity boost relative to the thermal background. This ``shear flow reactivity enhancement effect'' (SFRE) allows turbulent kinetic energy on fine spatial scales to contribute to fusion reactivity before thermalizing, which, remarkably, enables ignition of some inertial confinement fusion (ICF) hot spots under conditions where fully thermalized plasma would fail to ignite. The size of the SFRE is a consequence of the dramatic scale separations distinguishing thermal ions, which govern fluid quantities, and fast ions, which govern fusion reactivity. It is demonstrated in this work that, as the Gamow energy increases relative to the thermal energy, the SFRE in unmagnetized plasma becomes asymptotically large compared to hydrodynamic effects such as viscous dissipation. An asymptotic formula is derived in this limit, quantifying the SFRE for reactants of disparate masses and charge states.

Deep Learning-Accelerated Dynamic Kinetic Monte Carlo Simulation for Hydrogen Transport in Tungsten

2026-06-05T00:48:53Z

In magnetic confinement fusion reactors, hydrogen plasma irradiation causes material saturation and recycling, where hydrogen released from the tungsten wall significantly impacts the peripheral plasma. Kinetic Monte Carlo (kMC) simulations are essential for investigating the dynamic balance between incident and emitted fluxes at the atomic scale. However, standard kMC frameworks are inadequate for handling realistic material complexities, such as polycrystalline structures and dynamic evolution under irradiation, being computationally bottlenecked by continuous transition parameter updates. Conventionally, evaluating migration barriers in disordered systems (e.g., grain boundaries) relies on computationally prohibitive on-the-fly atomistic calculations like the Nudged Elastic Band (NEB) method. Here, we present a deep learning-accelerated Dynamic kMC framework that eliminates this reliance. Our approach integrates a three-stage deep learning pipeline: a pix2pix model for predicting local 3D potential energy distributions, a U-Net for extracting hydrogen trapping sites, and a 3D-CNN for directly evaluating migration barriers. To achieve macroscopic timescales, we implemented a hierarchical spatial index combined with a differential local-update algorithm operating in O(1) complexity. This architecture restricts recalculations to the immediate vicinity of moving atoms, accelerating updates. Demonstrated on a large-scale realistic polycrystalline tungsten model, the framework successfully reproduces preferential hydrogen trapping along grain boundaries, bridging the gap between atomic-scale accuracy and macroscopic timescales for full-scale plasma-wall interaction simulations.

Development of a 3D-CNN-based Prediction Model for Migration Barriers in Plasma-Wall Interactions

2026-06-05T00:46:09Z

Understanding the long-term transport of hydrogen isotopes in plasma-facing materials, such as tungsten, is critical for the steady-state operation of magnetic confinement fusion reactors. However, dynamically updating the transition parameters for kinetic Monte Carlo (kMC) simulations as the atomic structure evolves under continuous plasma irradiation remains a severe computational bottleneck. Conventionally, calculating these migration barriers requires the iterative and computationally expensive Nudged Elastic Band (NEB) method. To overcome this limitation, this article presents a highly efficient surrogate model for predicting migration barriers using a three-dimensional Convolutional Neural Network (3D-CNN), establishing the final component necessary to realize on-the-fly molecular dynamics (MD) and kMC hybrid simulations. The proposed deep learning model takes a two-channel volumetric input, the local three-dimensional potential energy distribution and the voxelized spatial coordinates of the initial and final trapping sites, to directly output the migration barrier as a scalar value. Trained on a comprehensive dataset of tungsten-hydrogen configurations evaluated using the Embedded Atom Method (EAM) potential, the model demonstrated robust predictive accuracy, achieving a Mean Absolute Error (MAE) of 0.124 eV and a high coefficient of determination of 0.890. Furthermore, utilizing GPU acceleration, the inference time is reduced to approximately 2.7 milliseconds per barrier, achieving a speed-up ratio of over 23,000 compared to conventional NEB calculations. This extraordinary acceleration effectively resolves the computational barrier of transition rate evaluations, paving the way for large-scale, dynamic modeling of plasma-wall interactions.

Flow-Regulated Suprathermal Particle Acceleration in Weakly Collisional Astrophysical Plasmas

2026-06-05T00:19:01Z

We investigate the formation of suprathermal particle populations in weakly collisional plasmas using a one-dimensional Fokker-Planck framework. A key element of this work is the introduction of a systematic velocity-space drift term that represents net energization relative to a background streaming flow. This term provides a minimal phenomenological description of competing relaxation and acceleration processes, enabling the incorporation of large-scale plasma dynamics into kinetic particle evolution. The model further includes spatial advection, velocity-space diffusion associated with wave-particle interactions, and collisional relaxation. To explore the role of time-dependent large-scale plasma dynamics, we consider three representative temporal profiles of the streaming velocity: accelerating, decelerating, and steady flows. We find that velocity-space diffusion primarily governs the formation of suprathermal tails, while the streaming-induced drift regulates their efficiency and spectral properties. In particular, the overall fraction of suprathermal particles depends only weakly on the detailed temporal evolution of the flow and is largely controlled by the time-averaged streaming velocity. These results suggest that large-scale streaming motions can be incorporated as an effective systematic energization mechanism in weakly collisional plasmas, providing a minimal and flexible framework applicable to a broad range of space and astrophysical environments.

Machine Learning for Electron-Scale Turbulence Modeling in W7-X

2026-06-04T22:11:09Z

Constructing reduced models for turbulent transport is essential for accelerating profile predictions and enabling many-query tasks such as parameter exploration and design optimization. This work investigates machine-learning-driven reduced models for Electron Temperature Gradient (ETG) turbulence in the Wendelstein 7-X (W7-X) stellarator. We develop physics-guided scaling laws to predict the ETG heat flux at seven radial locations as functions of three key plasma parameters: the normalized electron temperature gradient ($ω_{T_e}$), the ratio of normalized electron temperature and density gradients ($η_e$), and the electron-to-ion temperature ratio ($τ$). The model coefficients are determined through regression combined with an active learning strategy. The procedure initializes the scaling laws using low-cardinality sparse-grid training data and iteratively enriches the training set by selecting maximally informative samples from an existing simulation database. The predictive performance of the models is assessed using out-of-sample datasets comprising more than $393$ points per radial location. Using the coefficients identified at the seven training radial locations, we further derive regression-based parameterizations for the scaling-law coefficients as functions of radial position. The resulting models are then evaluated at three additional radial locations not used during training, including both interpolation and moderate extrapolation cases. Overall, our reduced models demonstrate good predictive performance and achieve accuracy comparable to the original reference simulations, including in interpolation and moderate extrapolation regimes. An important finding is that a single radius-independent model cannot adequately describe ETG transport across the W7-X core, suggesting the presence of geometry-dependent physics not captured by the present formulation.

Plasticity of Neutron Star Crusts

2026-06-04T20:45:42Z

We use first-principles molecular dynamics simulations to study the deformation and breaking of neutron star crusts. When simulating with strain rates several orders of magnitude slower than prior work, we find a new regime of steady plastic flow beyond the breaking point that is independent of the initial crystal structure. Polycrystals exhibit a robust transition from linear elasticity to perfect plastic flow at shear strains of $ε= 0.05$, while monocrystals break at $ε= 0.11$ and then flow plastically. The universal post-break plasticity may arise because the crystal self-consistently assumes a defect density to accommodate the imposed strain rate. If broken crusts can re-anneal to large crystal sizes, crust breaking may repeat with implications for magnetar bursts and flares.

Depolarization and Polarization-Transfer Rates for Solar He I Lines due to Collisions with Neutral Hydrogen

2026-06-04T17:36:33Z

Context. Neutral helium (He I) produces several spectral lines that are widely used for solar diagnostics. The role of collisions between He I atoms and neutral hydrogen (H I) in the modeling of solar He I lines remains insufficiently quantified. Accurate determination of collisional rates affecting atomic polarization is needed for solar spectropolarimetry. Aims. Our aim is to provide a set of multi-level and multi-term collisional depolarization, polarization-transfer, and population-transfer rates, due to isotropic collisions with neutral hydrogen, for He I levels and terms involved in the main solar He I diagnostic lines. Methods. The calculations are performed within the frozen-core approximation, in which the inner 1s electron is treated as a core with Lc = 0, Sc = 1/2, and Jc = 1/2, while the outer electron is treated as the active valence electron. Results. We compute both multi-level rates, describing depolarization and polarization transfer between fine-structure J-levels, and multi-term rates, which additionally account for coherences between different J-levels belonging to the same term. Conclusions. Our results provide the collisional input needed for the statistical equilibrium equations (SEE) of the polarization of the main He I solar lines, including the 10830 Å, D3 5876 Å, and related triplet transitions, and allow a quantitative reassessment of the role of neutral-hydrogen collisions in He I spectropolarimetry.