Atmospheric-Pressure Ar/Air Plasma Jet-Induced Degradation of Azo Dyes in Aqueous Solutions: Kinetic and Mechanistic Insights

2026-03-02T09:09:55Z

Atmospheric-pressure non-thermal plasmas are promising platforms for advanced oxidation in water treatment, yet quantitative coupling between reactive species delivery, solution chemistry, and molecular fragmentation remains unclear. We investigate degradation of two structurally related azo dyes using an Ar plasma jet in a plasma-liquid discharge configuration with an immersed counter-electrode to enhance interfacial coupling. Plasma exposure generated a reactive oxygen and nitrogen species environment and strong acidification, increasing proton concentration up to 49-fold. UV-Vis analysis showed rapid chromophore decay, achieving 0.88 and 0.94 removal within 40 min. Biphasic kinetics indicated a transition from radical-flux-controlled to transport-influenced regimes. Fluorescence and Raman spectroscopy confirmed transient oxidized intermediates and progressive pi-conjugation breakdown, elucidating plasma-driven oxidative fragmentation mechanisms.

Delta-Doped Diamond via in-situ Plasma-Distance Control

2026-03-02T07:55:34Z

We present an approach for the CVD growth of diamond, where the sample is placed in a defined distance from the reactor baseplate, to which the plasma couples. We observe two previously unknown growth regimes. In the first case, the sample is positioned within three to five millimeters of the plasma, leading to a decreased growth rate, compared to a position inside the plasma and, additionally, to an increased nitrogen incorporation, allowing the fabrication of delta-doped layers with a thickness below 30 nm. In another regime, where the sample is more than 10 mm away from the plasma, no growth is observed. Instead, we assume a deposition of nitrogen-rich species on the diamond surface, which is incorporated during the growth of the following layer. All fabricated layers show NV emission, where the intensity correlates with the nitrogen incorporation. The growth techniques could allow the fabrication of highly doped thin films for quantum sensing applications, as well as layers with low NV concentration, for quantum computing. The new approaches are applicable not only for nitrogen incorporation but also for other defects, for example, phosphorus, which could open up new avenues for diamond-based electronics.

Surrogate-based multilevel Monte Carlo methods for uncertainty quantification in the Grad-Shafranov free boundary problem

2026-03-01T23:17:04Z

We explore a hybrid technique to quantify the variability in the numerical solutions to a free boundary problem associated with magnetic equilibrium in axisymmetric fusion reactors amidst parameter uncertainties. The method aims at reducing computational costs by integrating a surrogate model into a multilevel Monte Carlo method. The resulting surrogate-enhanced multilevel Monte Carlo methods reduce the cost of simulation by factors as large as $10^4$ compared to standard Monte Carlo simulations involving direct numerical solutions of the associated Grad-Shafranov partial differential equation. Accuracy assessments also show that surrogate-based sampling closely aligns with the results of direct computation, confirming its effectiveness in capturing the behavior of plasma boundary and geometric descriptors.

Rugged magneto-hydrodynamic invariants in weakly collisional plasma turbulence: Two-dimensional hybrid simulation results

2026-03-01T22:09:03Z

Aims. We investigated plasma turbulence in the context of solar wind. We concentrated on properties of ideal second-order magneto-hydrodynamic (MHD) and Hall MHD invariants. Methods. We studied the results of a two-dimensional hybrid simulation of decaying plasma turbulence with an initial large cross helicity and a negligible magnetic helicity. We investigated the evolution of the combined energy and the cross, kinetic, mixed, and magnetic helicities. For the combined energy and the cross, kinetic, and mixed helicities, we analysed the corresponding Kármán-Howarth-Monin (KHM) equation in the hybrid (kinetic proton and fluid electron) approximation. Results. The KHM analysis shows that the combined energy decays at large scales. At intermediate scales, this energy cascades (from large to small scales) via the MHD non-linearity and this cascade partly continues via Hall coupling to sub-ion scales. The cascading combined energy is transferred (dissipated) to the internal energy at small scales via the resistive dissipation and the pressure-strain effect. The Hall term couples the cross helicity with the kinetic one, suggesting that the coupled invariant, referred to here as the mixed helicity, is a relevant turbulence quantity. However, when analysed using the KHM equations, the kinetic and mixed helicities exhibit very dissimilar behaviours to that of the combined energy. On the other hand, the cross helicity, in analogy to the energy, decays at large scales, cascades from large to small scales via the MHD+Hall non-linearity, and is dissipated at small scales via the resistive dissipation and the cross-helicity equivalent of the pressure-strain effect. In contrast to the combined energy, the Hall term is important for the cross helicity over a wide range of scales. The magnetic helicity is scantily generated through the resistive term and does not exhibit any cascade.

Turbulent Heating between 0.2 and 1 au: A Numerical Study

2026-03-01T21:22:20Z

The heating of the solar wind is a key to understand its dynamics and acceleration process. The observed radial decrease of proton temperature in the solar wind is slow compared to the adiabatic prediction and it is thought to be caused by turbulent dissipation. To generate the observed 1/R decrease, the dissipation rate has to reach a specific level which varies in turn with temperature, wind speed, and heliocentric distance. We want to prove that MHD turbulent simulations can lead to the 1/R profile. We consider here the slow solar wind, characterized by a quasi-2D spectral anisotropy. We use the EBM (expanding box model) equations, which incorporate into 3D MHD equations the expansion due to the mean radial wind, allowing to follow the plasma evolution between 0.2 and 1 AU. We vary the initial parameters which are: Mach number, expansion parameter, plasma beta, and properties of the energy spectrum as the spectral range and slope. Assuming turbulence starts at 0.2 AU with a Mach number equal to unity, with a 3D spectrum mainly perpendicular to the mean field, we find radial temperature profiles close to 1/R in average. This is done at the price of limiting the initial spectral extent, corresponding to the small number of modes in the inertial range available, due to the modest Reynolds number reachable with high Mach numbers.

Feasibility of Negative Triangularity Equilibria in the SPARC Tokamak

2026-03-01T18:07:23Z

We investigate the feasibility of negative triangularity (NT) plasma configurations in the SPARC tokamak, a compact, high-field device (up to 12.2 T) designed for positive triangularity (PT) operation. Using the FreeGS free-boundary equilibrium solver, we systematically explore the parameter space through 600+ equilibrium calculations spanning triangularity (-0.7-0.7) and elongation (1.0-2.1) while respecting SPARC's coil current limits and first-wall constraints and selecting a reduced-field 8 T operating point. We find that moderate NT double-null plasmas (delta = -0.35, kappa = 1.68) are achievable at 8 T with plasma currents of 2.1 MA. However, NT operation requires 43% plasma volume reduction (from 20.0 to 11.4 m$^3$) compared to the baseline PT design due to vessel walls optimized for PT conformity, and connection lengths are reduced by 40% due to geometric mismatch with the PT-optimized divertor. Central solenoid current requirements decrease by 54% in NT configurations, though specific shaping coils (PF3) require a factor of 5.5 higher currents. All equilibria satisfy fundamental MHD stability criteria with comfortable margins. Thus, while performance is degraded relative to baseline design, these results demonstrate SPARC's potential as a high-field experimental bridge between contemporary NT experiments and proposed NT reactor concepts, capable of testing whether NT's operational advantages (ELM-free operation, favorable impurity transport) persist under reactor-relevant conditions provided by SPARC.

Stability and wave dynamics in polytropic Eddington-inspired Born-Infeld gravitating solar plasmas

2026-03-01T07:40:44Z

We investigate the influence of nonlinear gravity corrections, arising from the Eddington-inspired Born-Infeld (EiBI) theory on wave dynamics, stability, and energy transport processes in polytropic, viscous, and turbulent solar plasmas. Analytical and numerical analyses of the Jeans-normalized quadratic dispersion relation demonstrate that both the EiBI gravity parameter $(χ)$ and the relative polytropic sound speed $(β)$ independently regulate oscillation frequencies, growth rates, phase velocities, perturbation energy partitioning, and outward acoustic energy flux. Positive $χ$ systematically elevates oscillation frequencies, phase velocities, and outward energy flux level by $\sim$10% relative to the Newtonian predictions, while larger $β$ enhances them by up to 55%, thereby promoting wave propagation and efficient acoustic transport. Conversely, negative $χ$ strengthens gravitational binding and increases damping rates by $\sim$40%, particularly for the \textit{g}-modes. Energy partitioning analyses reveal that the EiBI corrections fundamentally restructure the kinetic-electrostatic-gravitational energy balance. While the Newtonian gravity contributes negligibly ($<$4%), nonzero $χ$ channels up to one-third of oscillation energy into gravitational modes. The modal surface flux calculations further confirm that only the \textit{p}-modes drive outward energy transport (amplification for $χ>0$, suppression for $χ<0$). A direct comparative analysis with four years of SDO/HMI Doppler velocity observations demonstrate a robust theoretical agreement for $χ=3\times10^7$ m$^5$kg$^{-1}$s$^{-2}$, providing the first empirical constraint on the solar EiBI gravity through helioseismology. The findings offer a rigorous framework for advancing our understanding about solar plasma stability, helioseismic signatures, and ambient atmospheric energy transport processes.

Simulating plasma wave propagation on a superconducting quantum chip

2026-03-01T05:32:37Z

Quantum computers may one day enable the efficient simulation of strongly coupled plasmas that lie beyond the reach of classical computation in regimes where quantum effects are important and the scale separation is large. In this article, we take a first step toward efficient simulation of quantum plasmas by demonstrating linear plasma wave propagation on a superconducting quantum chip. Using high-fidelity and highly expressive device-native gates, combined with an error-mitigation technique, we simulate the scattering of laser pulses from inhomogeneous plasmas. Our approach is made feasible by the identification of a suitable local spin model whose excitations mimic plasma waves, and whose circuit implementation requires a lower gate count than other proposed approaches that would require a future fault-tolerant quantum computer. This work opens avenues to study more complicated phenomena that cannot be simulated efficiently on classical computers, such as nonlinear quantum dynamics when strongly coupled plasmas are driven out of equilibrium.

Nonlinear magnetohydrodynamic modeling of ideal ballooning modes in high-$β$ Wendelstein 7-X plasmas

2026-03-01T02:13:06Z

We present nonlinear magnetohydrodynamic (MHD) simulations of high-$β$ Wendelstein 7-X plasmas using the stellarator extension of the M3D-$C^1$ code, building on the recent work that shows benign saturation of ideal ballooning modes above the designed $β$ limit in the standard configuration [Y. Zhou et al, Phys. Rev. Lett. 133, 135102 (2024)]. First, we examine the results' sensitivity to the parallel thermal conductivity. It is found that while an increased parallel conductivity reduces the linear growth rate, the saturated pressure profile is barely affected. Second, we consider the dependence on the profile shape. It is shown that an equilibrium with a peaked pressure profile and lower $β$ is subject to more significant change than a broad profile with higher $β$ and a larger growth rate, suggesting that benign saturation, or nonlinear stability, is not guaranteed and not dictated by linear growth. Third, we study the influence of the magnetic configuration, with the equilibrium rotational transform varied by adjusting the planar coil current. With similar growth rates, similar magnitudes of profile change are found regardless of the presence of a low-order resonance, which implies that the saturation mechanism is not specific to a resonant or non-resonant mode. These results indicate that MHD stability should still be treated seriously in stellarator operation and design, for which nonlinear modeling using tools like M3D-$C^1$ can play an instrumental role.

The Value and Cost of Fusion Neutrons

2026-02-28T23:11:52Z

Deuterium-tritium fusion reactions produce high-energy neutrons that can transmute materials into valuable isotopes. Over the next ten years, the cost of fusion neutrons is projected to decrease by roughly seven orders of magnitude. Most ($\sim$5 orders of magnitude) is technological overhang driven by the low availability of current experiments; the remaining $\sim$2 orders of magnitude require higher plasma gain and lower capital intensity. We introduce the levelized cost of a neutron (LCON), an economic metric analogous to the levelized cost of energy that gives the minimum neutron value for economic breakeven of a fusion system. LCON depends on plasma gain, capital intensity, availability, and neutron flux, and is offset by revenue from co-produced electricity, precious metals, and radioisotopes. The revenue per neutron spans at least ten orders of magnitude, from electricity and gold ($\sim$\$$10^{-20}$/neutron) to actinium-225 ($\sim$\$$10^{-10}$/neutron), defining a `neutron ladder': a staged, revenue-positive development pathway from current fusion devices to terawatt-scale power plants.

Measurement of ion acceleration and diffusion in a laser-driven magnetized plasma

2026-02-28T19:42:07Z

Here we present results from an experiment performed at the GSI Helmholtz Centre for Heavy Ion Research. A mono-energetic beam of chromium ions with initial energies of $\sim 450$ MeV was fired through a magnetized interaction region formed by the collision of two counter-propagating laser-ablated plasma jets. While laser interferometry revealed the absence of strong fluid-scale turbulence, acceleration and diffusion of the beam ions was driven by wave-particle interactions. A possible mechanism is particle acceleration by electrostatic, short scale length kinetic turbulence, such as the lower-hybrid drift instability.

The Hall Term and Anomalous Resistivity Effects in Neon Gas-Puff Z-Pinches

2026-02-27T21:58:10Z

In this paper, we compare experimental and numerical simulation results to benchmark the PERSEUS code against gas-puff $Z$-pinch implosions on COBRA. We then use the code to investigate the structure of the plasma sheath. To this end, we study the morphology of the implosion, focusing on non-magnetohydrodynamical (MHD) effects such as electron drifts governed by the Hall term within the growing magneto-Rayleigh-Taylor instability (MRTI). The spatial wavelength of MRTI is better reproduced when both the Hall term and an anomalous resistivity driven by the electron drift are included. Additionally, cathode-anode gap polarity effects are more accurately captured when the Hall term is turned on. The plasma sheath structure, which includes both the accelerating piston driven by the magnetic pressure and the shockwave ahead of it, matches interferometric measurements in width only when a current-driven anomalous resistivity model is used. This anomalous resistivity is assumed to be driven by the lower-hybrid-drift instability, which generates small-scale turbulence with typical wavelengths < 30μm.

Spark-Induced Shockwave Dynamics Revealed via Nonresonant Four-Wave Mixing

2026-02-27T15:51:51Z

We report on the experimental detection of shockwave dynamics produced in a spark discharge, using a nonresonant four-wave mixing optical technique. In particular, we observe the spark-induced local density perturbation across a millimeter-range probe volume, centered on the discharge, via single-shot coherent Rayleigh-Brillouin scattering. We detect the emergence of shock-induced flow velocities, which appear as distinct features in the spectrum, and monitor their dynamic evolution from a few hundred nanoseconds to microseconds after the spark. Finally, we benchmark our measurements against simulations based on a one-dimensional compressible flow model. Our results pave the way for quantitative measurements of highly non-uniform transient flows in challenging environments featuring non-equilibrium gas kinetics.

Efficient Acceleration of High-Quality GeV-Electron Bunches in a Hybrid Laser- and Beam-Driven Plasma Wakefield Accelerator

2026-02-27T15:46:31Z

Plasma-based accelerators are compact and provide high gradients, yet their practical use has been limited by energy gain, stability, beam quality, and energy transfer efficiency. Here, we address several of these challenges simultaneously using a hybrid scheme in which an electron bunch from a laser wakefield accelerator (LWFA) drives a subsequent plasma wakefield accelerator (PWFA) stage with internal witness injection. Close to driver depletion in the PWFA stage, we obtain witness bunches with higher electron energy, reduced energy spread and divergence, and higher angular-spectral charge density compared to LWFA alone. We report energy transformer ratios approaching~2, and about 20\% of the initial energy in the drive beam was transferred to the witness bunch, thereby achieving a driver-to-witness energy transfer efficiency that largely surpasses that of all previous PWFA experiments.

Stellarator island divertor shape optimization for reduced peak heat fluxes

2026-02-27T14:32:06Z

An automated algorithm to construct island divertors for stellarators is presented and is used to find divertors that meet heat flux requirements determined by engineering and material limits. The algorithm uses just two initial conditions: two starting coordinates on the island separatrix. We leverage the simplicity of the algorithm to explore the divertor parameter space in a fixed magnetic equilibrium. Heat loads are approximated using the field line diffusion model implemented in the FLARE code. Optimal divertor solutions that satisfy engineering requirements are found using a parameter scan and a Bayesian optimization routine. The optimization achieves a 95% reduction in computational cost compared to the parameter scan. The resulting divertors are proven to be robust to varying plasma parameters through simulations with different cross-field heat diffusivities. This work represents a first step towards island divertor optimization for stellarators.