Constructing mode-resolved quantum optical models for emitters in photonic crystals

2026-07-14T10:26:23Z

Recent advances are enabling quantum emitters to interact with photonic crystals, whose electromagnetic modes exhibit complex dispersion relations, spatial mode structure, and polarization textures. However, modeling light-matter behavior in these systems faces a persistent trade-off: electromagnetic approaches based on Maxwell-equation solvers provide realistic vectorial descriptions but are difficult to integrate with quantum many-body and non-perturbative methods, whereas simplified quantum-optical lattice models are tractable but typically rely on scalar and spatially independent light-matter couplings that miss essential features of these structured photonic environments. Here, we introduce a constructive framework to derive quantum-optical lattice descriptions that overcome this trade-off. Combining symmetry-constrained tight-binding constructions with numerically computed photonic band structures and field profiles, our method yields minimal, symmetry-enforced lattice Hamiltonians that reproduce the target photonic dispersion while retaining the mode-resolved (position- and polarization-dependent) structure of the light-matter coupling. We show that these models recover Green's-function-based emitter dynamics in the perturbative regime, while providing access to non-perturbative quantum dynamical simulations beyond emitter-only descriptions. As a proof of principle, we apply the framework to a two-dimensional photonic crystal and show that it captures polarization-dependent directional emission inaccessible to scalar models, while enabling the analysis of non-Markovian light-matter dynamics and entanglement. Our results provide a practical bridge between classical electromagnetic simulation tools and quantum-optical many-body and non-Markovian modeling in photonic crystal settings.

Lasing from a Quantum-Dot-Like Buried Heterostructure in an InP Nanobeam Cavity

2026-07-14T09:38:47Z

We report lasing from a lithographically defined buried heterostructure with an estimated lateral footprint of (107 nm)^2, embedded in an InP photonic-crystal nanobeam cavity. This represents the smallest laterally confined buried heterostructure gain region from which lasing has been observed. Despite etching of the active region during cavity definition and the associated risk of surface-related nonradiative recombination, optically pumped devices exhibit a clear lasing threshold and a narrow linewidth. By systematically varying the BH size, we investigate how the lasing threshold depends on the active volume under optical pumping. The estimated intrinsic threshold under ideal carrier injection is 57 nW, comparable to values reported for single quantum-dot nanolasers, highlighting the potential of quantum-dot-scale buried heterostructures as deterministic, scalable gain media for nanophotonic lasers.

Merging the characteristics of an exceptional point and a quasi-bound state in the continuum in nanophotonic cavities

2026-07-14T07:03:00Z

In conventional eigenvalue analyses of non Hermitian two mode systems, mode coupling cannot produce the simultaneous occurrence of an exceptional point (EP) and a quasi bound state in the continuum (QBIC) at the same spectral position. This work shows that this limitation originates from the eigenvalue framework itself. By introducing an excitation phase degree of freedom, the interference between radiation channels can be reshaped without modifying the intrinsic eigenmodes of the system, thereby overcoming this constraint. Based on coupled mode theory, we demonstrate that the excitation phase enables the merging of an EP and a QBIC (and even a BIC) in nanophotonic cavities, and we validate this mechanism through full wave simulations of practical stacked structures. In the EP-QBIC regime, the mode quality (Q) factor is enhanced by more than one order of magnitude. We further systematically analyze the formation conditions of EP-QBIC states and conventional QBICs. Moreover, in a purely plasmonic structure, introducing an excitation phase leads to a more than 15 fold increase in the Q factor due to QBIC formation-surpassing the theoretical limit imposed by intrinsic material loss.

Inverse Engineering of Optical Constants in Photochromic Micron-Scale Hybrid Films

2026-07-14T06:38:00Z

Photochromic materials enable dynamic optical modulation through reversible transitions between distinct absorption states, with broad potential for smart windows, adaptive optics, and reconfigurable photonic devices. Micron-scale photochromic hybrid films present a particularly attractive platform for these applications, combining straightforward preparation with substantial optical modulation and scalability for high-volume fabrication. However, rational design of such films remains fundamentally constrained by the absence of well-defined optical constants. Unlike homogeneous thin films, micron-scale hybrid photochromic materials comprise active particles dispersed non-uniformly within polymer matrices. Conventional first-principles electromagnetic simulations face substantial computational costs and discrepancies between simulated and experimental particle distributions. Here, we introduce a data-driven framework that extracts effective optical constants directly from minimal experimental transmittance measurements. Our dual-state effective model approximates the complex inhomogeneous photochromic layer as a compressed homogeneous medium characterized by pseudo-refractive indices and pseudo-extinction coefficients for both pristine and UV-irradiated states. Through systematic optimization against experimental data from tungsten oxide-polyvinylpyrrolidone hybrid films, we determine wavelength-dependent pseudo-optical constants and compression ratios that enable accurate prediction of optical modulation within the tested thickness range. Our methodology establishes a framework for engineering hybrid photochromic systems and demonstrates how data-driven modeling can overcome limitations in characterizing complex nanostructured materials.

Space-Time Modulated vs 2-Bit Reflect-Arrays: A Comparison of Main Beam Gain and Sidelobe Level Performance

2026-07-14T04:44:10Z

This paper presents a comprehensive analysis of the phase errors introduced by 2-bit reflectarray architectures and investigates their impact on aperture synthesis for beam-steering applications. Building upon this analysis, an amplitude-aware synthesis technique based on space-time modulated (STM) reflect-arrays is proposed to mitigate the main-beam gain degradation commonly associated with STM-based equivalent phase generation while preserving the enhanced phase resolution enabled by temporal coding. A 10λby 10λ reflect-array aperture with λ/2 inter-element spacing is considered, where the desired aperture phase distribution is synthesized using a library of achievable reflection coefficients generated from all possible combinations of four 2-bit phase states distributed across (L) temporal segments. The proposed approach introduces a phase-tolerance window and selects the reflection state with the highest reflectance within the allowable phase range. By exploiting the inherent amplitude diversity of the STM state space, the proposed approach maximizes aperture efficiency while maintaining the desired beam-steering phase distribution. Numerical results demonstrate that the method substantially reduces the gain penalty typically associated with STM reflect-arrays along with providing significant sidelobe suppression.

Peak-Decomposition-Free Inverse Metrology of Hyperspectral Moiré Photoluminescence

2026-07-14T04:11:27Z

Hyperspectral photoluminescence (PL) of moiré transition-metal dichalcogenide heterobilayers encodes spatially varying exciton landscapes, but extracting that information is hampered by the ambiguity of multi-peak spectral decomposition. Here we develop a peak-decomposition-free inverse framework for quantitative optical metrology of effective disorder coordinates. From the raw cube $I(x,y,E)$ we construct physically motivated descriptor maps -- centroid energy, dominant emission energy, spectral width, low/high spectral-weight ratio, and dominant--centroid offset. Their spatial autocorrelation hierarchy and covariance structure form a robust descriptor fingerprint of multi-scale disorder-sensitive spectral statistics. By matching these descriptor summary statistics to a minimal smooth-plus-trap generative model through a grid-Bayesian inverse, we infer effective disorder coordinates $\Thetaeff=\{\Ws,\xis,\Wt,\nt\}$ with explicit uncertainties. Using synthetic PL cubes generated from controlled multi-scale landscapes, we recover the well-identified smooth-disorder coordinates and constrain the trap sector up to a strength--density degeneracy. We report this degeneracy explicitly as an intrinsic identifiability limit rather than a deficiency of the method, and map four canonical disorder regimes onto a disorder-coordinate diagram. The descriptor statistics are stable against shot noise and pixel pitch, and behave predictably under optical-resolution and energy-window changes. The same pipeline ingests experimental cubes without modification, making it directly applicable to two-dimensional and moiré materials. Our results establish descriptor-based hyperspectral PL as a practical, minimal-assumption route to optical disorder diagnostics and provide the validated core of a reusable analysis workflow (\texttt{HyperPL-Diag}) for moiré exciton systems.

Non-Markovian renormalization of optomechanical exceptional points

2026-07-14T03:45:05Z

We investigate how non-Markovian mechanical dissipation affects exceptional points in linearized optomechanical systems with red-sideband drive. For a chosen non-Ohmic mechanical bath, we derive analytical conditions for the memory-renormalized exceptional point by employing a pseudomode mapping, thereby demonstrating that structured environments displace the mode coalescence away from the Markovian prediction. Crucially, we reveal that failing to account for this memory-induced shift suppresses the divergent Petermann factor by orders of magnitude, showing that accurate bath modeling is essential for the successful operation of exceptional-point-based devices whenever reservoir-induced memory is non-negligible. We finally show that non-Markovianity modifies the cavity reflection spectrum, manifesting as a shallower optomechanically-induced-transparency dip, providing therefore an experimentally-accessible signature of structured mechanical environments.

Selective avoidance of multiple line-of-sight obstacles at 130~m using locally bending space-time wave packets

2026-07-14T03:34:44Z

Self-accelerating optical beams follow curved trajectories rather than propagating rectilinearly, which raises the prospect for avoiding line-of-sight (LoS) obstacles blocking the beam path. However, if a conventional laser beam is intercepted by an obstacle en route to an intended LoS target, then replacing this beam with a bending beam is not adequate: the obstacle is avoided but the target cannot be concomitantly reached. Rather, a laser beam that \textit{locally} bends around the obstacle -- before continuing along its rectilinear path -- is needed. Here we show that engineering the spatiotemporal spectrum of a pulsed beam yields a space-time wave packet whose propagation dynamics can be tuned at will to locally bend around one or multiple obstacles, thereby avoiding them, to selectively reach a designated target. We carry out our experiments over distances extending to 130~m from the source, carried out in an open-air environment. In one scenario, the beam is incident on a target placed between two LoS obstacles, one preceding it and one following it -- both of which are avoided. In a second scenario, the locally bending beam avoids one and then two LoS obstacles preceding the intended target. These results may contribute to applications requiring selective incidence on targets in remote sensing, stand-off detection, directed energy, for optical and radio-frequency communications in presence of LoS obstacles, and for selectively delivered radiation therapies.

Double metasurfaces and Optimal transport

2026-07-14T00:17:46Z

This paper constructs metalenses that separate homogeneous media with different refractive indices, refracting one domain into another while conserving a prescribed energy distribution. Using optimal transport theory, we design singlet and doublet metalenses satisfying energy conservation by refraction, and obtain partial regularity of the optimal maps involved.

Long baseline optical interferometric imaging with active phase stabilization

2026-07-13T21:22:40Z

Astronomical observations allow us to better our understanding of the universe. As we observe smaller and more distance features, we run into the diffraction limit of our observation system. This limit is a function of the wavelength observed and the size of the primary aperture used. We can synthesize a larger primary aperture by implementing interferometry. Long baseline optical interferometry would lead to significant improvements in astronomical imaging resolution. Building optical interferometers with free space baselines becomes significantly more difficult as the baseline increases. A promising alternative is to use optical fiber to connect telescopes. Fiber-based interferometers are much more susceptible to phase noise than their free-space counterparts due to inhomogeneities in the fiber medium. This leads to significant degradation of interferometric signals used for astronomical measurements. We implement phase stabilization techniques used in quantum communications to stabilize an optical interferometer with a 170km pseudo-baseline. We use a quantum optimal measurement technique with this interferometer to resolve the extent of a source four times smaller than the diffraction limit of the system within 1.5% error. These results bring the potential for a full-scale on-sky long baseline interferometer significantly closer. A 350km baseline optical interferometer at 1550nm would allow us to resolve sub microarcsecond features in the universe.

Entanglement, loss, and quantumness: When balanced beam splitters are best

2026-07-13T20:24:52Z

Quantum optics routinely uses beam splitters to generate entanglement, including in pioneering experiments conducted by Hanbury-Brown and Twiss and Hong, Ou, and Mandel. The quantum interference at beam splitters lies at the heart of what makes boson sampling hard to emulate by classical computers and is a vital component of quantum computation with light. Yet, despite overwhelming positive evidence, the conjecture that beam splitters with equal reflection and transmission probabilities generate the most entanglement for any state interfered with the vacuum has remained unproven for almost two decades [Asbóth et al., Phys. Rev. Lett. 94, 173602 (2005)]. We prove this conjecture for ubiquitous entanglement monotones including mixed-state generalizations of entanglement entropy and purity by uncovering monotonicity and convexity with respect to photon loss for these monotones. At the same time, we highlight an infinite class of lesser-used monotones for which the conjecture fails. Because beam splitters are so fundamental, our results yield numerous corollaries for quantum optics, including proof of a recent conjecture for the evolution of a measure of quantumness through loss and a more efficient computational strategy for optimizing entanglement generation over linear optics. These results justify the value of seeking mathematical rigour behind commonly accepted facts and the danger of trusting them unconditionally.

Direct writing of individual quantum dots

2026-07-13T17:52:24Z

Quantum light sources capable of generating single photons are fundamental building blocks for photonic quantum technologies. In the ongoing search for an ideal quantum emitter, inorganic halide perovskite nanocrystals have emerged as a promising source of single photons. Their unique optical response, with an unmatched ease of synthetic tunability, stands out amongst the competing platforms. However, their stochastic dispersion in solution challenges the deterministic and stable integration of individual emitters with photonic structures that is required for practical technologies. Notably, resolution and material compatibility constraints make conventional top-down fabrication processes insufficient for such heterogeneous integration. Here, we report direct writing of perovskite quantum dots (QDs) with individual-emitter resolution. By inducing a nanoscale-confined formation volume using a thermal scanning probe method, we achieve site-selective synthesis down to a single atomic-scale QD with spectral tunability and < 25 nm spatial control. As a result, we demonstrate high-yield arrays of CsPbI3 single-photon emitters with narrow linewidths and high single-photon purity up to 98% at room temperature, performance consistent with that of their state-of-the-art colloidal counterparts. Through such deterministic control, we uniquely realize the precise, on-demand coupling of these emitters to photonic cavities, as evidenced by a measured enhancement in the spontaneous emission rate. This represents a key advancement toward addressing the longstanding integration obstacles of these materials. Overall, by combining the atomic-scale tunability of chemical synthesis with the spatial control of additive manufacturing, our work opens new emitter engineering strategies to realize the untapped potential of colloidal materials for next-generation quantum technologies.

Analytical Markov Chain for Spatiotemporal Flux Evolution of the Inner Filter Effect in Fluorescent Media

2026-07-13T17:10:24Z

Characterizing emission and decay time spectra in multi-component fluorescent media is essential for identifying intrinsic material properties and optimizing detectors. However, wavelength evolution from the secondary inner filter effect (IFE) distorts these observable spectra. While Monte Carlo (MC) ray-tracing can simulate this distortion, accumulating adequate tracking statistics requires long computation times, which hinders parameter optimization within high-dimensional spaces. This paper presents an analytical Markovian transport model based on spatiotemporal decoupling. A Laplace transform converts the multi-nested convolution integrals over continuous domains into a discrete Markov transition matrix, reducing the computational complexity from an exponential scale with respect to wavelength bins $N_λ$ and cascade order $n$, $\mathcal{O}(N_λ^n)$, to a linear scale, $\mathcal{O}(N_λ + n)$. The resulting algebraic solutions evaluate transient decay time spectra as a continuum superposition of Gamma wave packets and predict steady-state wavelength spectrum distortions driven by the IFE within a sub-second timescale. Validations across orthogonal and front-face spectrometer configurations show that the calculated spectra match MC simulations in lineshape. This model can serve as a fast forward engine to accelerate parameter space screening, provide early-stage detector design references, and act as a physics-constrained input for event vertex reconstruction algorithms.

Phase synchronization dynamics of two mutually coupled InP lasers in a quantum entropy source

2026-07-13T16:57:29Z

Quantum random number generators, at the core of digital trust infrastructures, rely on quantum entropy sources (QESs) to produce randomness from physical processes. The quantum origin certification of a QES requires a physical model compatible with the measured signal of the device. Here, we study Quside Technologies' phase-diffusion QES consisting of a photonic integrated circuit (PIC) that uses the interference of two indium phosphide (InP) lasers operated in gain-switching by simultaneously modulating their pump currents from below to above the threshold. This produces intensity pulses in each laser that have random optical phases due to quantum spontaneous emission. The lasers' intensities interfere via heterodyning, and from the interference signal a random bit is obtained per modulation cycle. While this system offers high scalability and compactness, residual coupling between the two lasers can induce phase synchronization, thus reducing its extractable entropy. Through experiments and simulations of a physical model based on coupled stochastic rate equations, we quantify this effect and link laser coupling to phase synchronization. We further derive an analytical model for the probability distribution of the measured interference intensity, enabling direct extraction of the quantum phase difference distribution and laying the groundwork for the QES optimization.

Spacer-Mediated Gold Nanocube Arrays for Edge-Localized Excitonic Enhancement in Monolayer MoS2

2026-07-13T16:26:36Z

Plasmonic nanostructures offer an effective route for enhancing light-matter interaction in atomically thin semiconductors, whose optical response is intrinsically limited by their sub-nanometer active thickness. Here, we numerically investigate excitonic enhancement in monolayer (ML) Molybdenum Disulfide (MoS2) coupled to size-tuned gold (Au) nanocube arrays separated by thin aluminum oxide (Al2O3) and hexagonal boron nitride (h-BN) spacer layers. By varying the nanocube side length, the localized surface plasmon resonance is tuned across the visible spectral range to modulate the A- and B-excitonic transitions of monolayer MoS2. We show that the nanocube-size-dependent spectral redshift can be further controlled through the spacer material and thickness, enabling systematic tuning of the near-field distribution, carrier generation rate, quantum yield, and radiative decay enhancement. Localized plasmonic confinement yields excitation-rate enhancements of up to 4.35 at B-excitonic transition (605 nm) and 3.66 at A-excitonic transition (650 nm), while the radiative decay-rate enhancement exceeds 80, leading to 350-fold photoluminescence enhancement. Although both A- and B-excitonic channels are enhanced simultaneously, their relative contributions depend on nanocube size, spacer material, and spacer thickness, indicating wavelength-dependent excitonic modulation rather than strict exciton-selective switching. These findings establish Au nanocube arrays as a simple, scalable, and tunable plasmonic platform for enhancing excitonic carrier generation and emission in ML MoS2.