Space-Time Lensing by Accelerated Interfaces in Dispersive Media

2026-07-15T12:37:54Z

We present space-time lensing by synthetic accelerated interfaces in dispersive media. Frequency-dependent group velocities map spectral components of a pulse onto distinct trajectories in the longitudinal space-time plane, while an accelerated interface reshapes their frequencies through time-dependent Doppler shifts. We develop an inverse-design procedure for the interface trajectory that focuses a quasi-monochromatic wave packet at a prescribed space-time event for an arbitrary dispersion relation, then extend the construction to polychromatic pulses. In its time-reversed form, the operation collimates a broadband pulse into a narrow-band wave. Moreover, cascading the forward and reverse operations enables a broadband pulse to propagate through an otherwise dispersive channel in a spectrally compressed state before being refocused. Full-wave simulations validate the focusing construction and demonstrate dispersion suppression.

Proof of concept of heterodyne interferometry at 10.6 um using photonic correlation

2026-07-15T10:13:42Z

The task of imaging complex dust environments such as the inner astronomical units of a planet-forming disks requires dedicated mid-infrared (MIR) interferometric facilities with kilometric baselines and a large number of telescopes. Extrapolating technologies from current facilities is not straightforward. We aim to demonstrate the feasibility of using MIR heterodyne interferometry with a photonic correlation approach to recombine MIR signals from distant telescopes. We want to determine the current technological limits of such systems are. We developed a laboratory demonstration bench that can correlate MIR signals at 10 um with a photonic correlator. The photonic correlator uses commercially available telecom components at 1.5 um to transport and correlate heterodyne signals that could go up to 10 GHz in bandwidth, directly extendable to 40 GHz. We used the demonstration bench to study the noise levels and detection limits of a heterodyne interferometer with a photonic correlation. We confirm the correlation exhibited by wideband MIR signals with the photonic correlator, along with a characterization of the performance of the system and analyzed the noise levels. We show that the photonic correlator does not limit the detection and that it can be used to compensate for free-space delays at 10 um with a fiber delay at 1.5 um. With our current sub-optimal commercial infrared (IR) detectors, we have derived a detection limit of 130 Jy that is coherent flux for 8 m class telescopes with 1 h of incoherent integration. We discuss the possibility of lowering the detection limit down to typical T-Tauri stars (approximately 1 Jy) using new detectors and coherent integration based upon local oscillator synchronization with telecom fiber links.

Parity-Lifted Radiative Degeneracy: Orthogonal Dipoles over Parallel Dipoles in Achiral Dielectric Cavities

2026-07-15T08:49:43Z

Parity symmetry enforces radiative degeneracy of parity-conjugated emitters in free space. We selectively lift this degeneracy in an achiral dielectric cavity via coupling-induced global parity breaking: the cavity and individual dipoles each preserve parity, while their fixed relative orientation breaks global parity, enabling differential decay. This mechanism exhibits a structure-function trend in marked contrast to the Rosenfeld rule: orthogonal electric-magnetic dipoles yield radiative asymmetry approaching the theoretical limit of 2, whereas parallel ones show negligible differentiation. A semi-analytical model, validated across multiple modes, confirms generality. These findings establish a new paradigm for symmetry engineering without intrinsic chirality.

A unified multiscale 3D printer combining single-photon Tomographic Volumetric Additive Manufacturing and Two-Photon Polymerization

2026-07-15T08:07:22Z

Single-photon polymerization ensures rapid photopolymerization of centimeter-scale structures with features on the order of tens of micrometers, whereas 2PP provides sub-micrometer features at sub-millimeter scales. Existing hybrid approaches combining these techniques typically rely on stitched or layer-by-layer fabrication and often require separate printing platforms, making mesoscale manufacturing time-consuming. Here, we introduce a hybrid unified 3D printer that leverages the complementary strengths of both printing mechanisms to bridge this scale resolution-fabrication time gap. We propose integrating 2PP for high-resolution, localized spatial control with single-photon TVAM for enabling rapid, high-throughput 3D fabrication. In this approach, TVAM first forms millimeter-scale volumetric structures attached on a glass rod, via overprinting, which is then accessible, on the same platform, for subsequent high-resolution 2PP. Without needing to change the photoresin or introducing intermediate post-processing steps, we proceed to demonstrate finely printed structures via 2PP, fabricated both inside (embedded within) and on the surface of the millimeter-scale 3D objects printed with TVAM. Here, TVAM contributes in two distinct ways: by generating a pre-polymerized volume that facilitates subsequent 2PP, and by directly driving layer-less volumetric polymerization in designated regions within seconds. We experimentally demonstrate that this dual-mode strategy provides a mesoscale approach spanning three orders of magnitude in scale for rapid fabrication of millimeter-scale structures featuring 830 nm details. For applications such as micro-optics, biomedical scaffolds and tissue engineering, tens-of-micrometer features are sufficient across the majority of the volume, with higher resolution confined to localized functional regions.

Imprinting topology on thermal light

2026-07-15T07:44:16Z

Topological structuring of light inevitably leverages on optical coherence to ensure that the imparted spatial phases are preserved, requiring highly coherent sources or coherence engineering embedded in the design. Now we show that thermal light can be spatially engineered to carry optical topologies in the form of Skyrmions. Such topologies are immune to time averaged decoherence, a fact we leverage on in reverse to create metasurface mediated incoherent topologies from a thermal source. The pristine nature of our measured Skyrmions validates the approach, while simulations reveal how coherence management in the metasurface design would further enhance the functionality. Remarkably, the generation stage inherits robustness from the topology, remaining immune to material and fabrication defects. Our work reports the first topologies from purely thermal light, opening a path to exploiting topology in ubiquitous everyday light sources.

Photonic Ising machines toward and beyond a million spins

2026-07-15T05:07:26Z

Combinatorial optimization problems are central to many challenges in logistics, finance, engineering, and the life sciences, yet they remain among the most computationally demanding. Many of these problems can be mapped onto the Ising model, in which binary spins interact through a network of couplings, and solutions correspond to low-energy, ideally ground-state, spin configurations. Photonic Ising machines have the potential to be fast and energy-efficient heuristic solvers of optimization problems by leveraging the low latency, high bandwidth, and inherent parallelism of optics. However, current photonic implementations remain limited in scalability, connectivity, reconfigurability, and time-to-solution, preventing their use in many practical applications. In this perspective, we examine the current landscape of photonic Ising machines, discuss the challenges and limitations of existing platforms, and identify the scientific and technological advances needed to realize large-scale systems. These developments could establish photonic Ising machines as useful hardware platforms for practical optimization.

Revealing Hidden Topology of Complex Vector Beams via Plasmonic Interactions

2026-07-15T04:40:33Z

Structured light beams with space-variant polarization can be efficiently generated using voltage-tunable nematic liquid-crystal (Q-plate). By appropriately selecting the input state and the retardation of the Q-plate, an optical field acquires a spatially structured polarization distribution that is capable of encoding non-trivial topological information across the beam profile. These features can be directly read out through interaction with plasmonic nano-structures, such as circular and spiral slits. Here we show that, upon illumination, polarization-dependent excitation of surface plasmons converts the hidden topology of the polarization structure into observable intensity distributions, including plasmonic vortices and characteristic interference patterns, while the tunability of the input parameters enables a rich variety of distinct topological forms.

Direct Observation of Nanoscale Chiral Light-Matter Interactions Governed by Optical Chirality

2026-07-15T03:08:31Z

Optical chirality has been proposed as the fundamental quantity governing chiral light-matter interactions, but direct experimental verification has remained elusive. Here we realize an optical field with spatially modulated optical chirality and nearly uniform electric energy density, and provide the first direct experimental verification that optical chirality governs nanoscale chiral light-matter interactions. A single chiral nanoparticle exhibits a differential response that follows the spatial modulation of optical chirality, whereas no modulation is observed for an achiral nanoparticle. Electromagnetic simulations further demonstrate the feasibility of enantioselective optical trapping through experimentally achievable chiral optical forces.

Temperature and mean axial momentum vs. laser intensity of electrons released from O$_2$ by an 800 nm ultrashort pulsed laser

2026-07-15T02:07:35Z

A semi-empirical model is presented for the thermalized temperature $T$ and mean momentum in the direction of laser propagation <$p_{fz}$> of electrons released from O$_{2}$ after the passage of a focused $800$ nm ultrashort pulsed laser pulse vs. peak laser intensity $I_{0}$ to provide initial conditions for electrodynamic fluid simulations. For this, theoretical kinetic energy spectra in different directions are modified with two adjustable parameters representing the effects of electron rescatter off its parent ion during the optical cycle subsequent to ionization. The classical kinematics of rescatter, in conjunction with the spectral fits, is used to estimate <$p_{fz}$>.

Ionization rate vs. laser intensity determined from ion count vs. peak intensity due to neutral gas exposure to an 800 nm ultrashort pulsed laser

2026-07-15T01:08:25Z

The optical cycle-averaged ionization rate of Ar, O$_{2}$, and N$_{2}$ vs. local instantaneous laser intensity $I$ for linear polarized $800$ nm light is determined up to approx. $300$ TW/cm$^{2}$ by numerically inverting published time-of-flight ion spectrometer data. The published Ar$^{+}$ collection efficiency of the microchannel plate (MCP) at the end of the spectrometer and its $I_{0}$ scale are recalibrated by fitting it to its high $I_{0}$ solution. The relative collection efficiencies of the other species are determined by published MCP cathode data. Results for O$_2$ are consistent with a reevaluation of published data used to determine its cross section $σ_8$ in the multiphoton (low $I$) regime.

Filter shaping in integrated photonics using non-adiabatic control

2026-07-14T22:33:09Z

We demonstrate that an array of integrated coupled waveguides can be designed to simultaneously perform the spectral filtering and routing of light. The framework that we present here operates in a regime opposite to the shortcut-to-adiabaticity techniques, but we show it nevertheless also only requires smooth, slow, and small, modulations of the array's parameters. Our design strategy rely on the analogy which exists between the temporal evolution of an Hamiltonian and the propagation of light in an array of coupled integrated waveguides, mimicking spatially in photonics phenomena analogue to the electronic transitions. Interestingly, the chromatic dispersion restores in photonics the correspondence between spatial propagation effect and wavelength dependence. Therefore our framework is able to fully reproduces temporal effects such as resonant transitions, making it suitable for filtering applications. As a design involving modulations, it shares similarities with Bragg-Gratings (BGs): but it adds some extra features that make it complementary in terms of applications and functionality. First it adds routing capability with the seamless management of multi-waveguide configuration. And secondly the framework we present requires only wavelength-scale modulations, order of magnitudes slower than for BGs. The effects we present here may not interfere with BGs geometry and functionality, and could even be combined with the latter.

Unveiling Structured Optical Coherence in Nonlinear Optics

2026-07-14T22:06:03Z

Nonlinear optical interactions are typically driven by coherent sources. Recently, however, incoherent sources have also been shown to offer new opportunities in nonlinear optics. Here we study the effects of the source incoherence in second harmonic generation. We derive and experimentally validate an analytic expression for the far-field coherence function at the second harmonic frequency, which is a generalization of the well-known van Cittert-Zernike theorem. Unlike the linear optics case, here the results depend not only on the source spatial distribution, but also on the nonlinear structure of the crystal. We further show, by performing Young's double-slit measurement, that the coherence at the second harmonic increases as the light propagates inside the nonlinear crystal. Our results establish nonlinearity as a degree of freedom for optical coherence, opening a new research area at the interface of statistical optics and nonlinear optics.

Engineering Nanophotonic Modes via the Radiation Continuum

2026-07-14T21:52:01Z

We demonstrate, experimentally and theoretically, a universal mechanism for combining nanophotonic modes relying on radiative-loss-mediated couplings. For the case of two modes this mechanism leads to a BIC-type phenomenon characterized by the emergence of a high-quality factor subradiant mode. This mode is experimentally observed in the mid-infrared range, in arrays of double-metal patch antennas where the radiation loss rates are controlled by the geometry of the system. As the mechanism described here is independent of the specific nature or number of the interacting modes, it can be used to combine physically different resonating structures, without requiring fine symmetry tuning or specific modal configurations, opening new opportunities for resonance-based nanophotonic devices.

Exactly Solvable Diffraction-Grating Scattering Problems for TE and TM waves

2026-07-14T21:49:56Z

In J.~Phys.~A {\bf 31}, 3493 (1998), Berry provides an analytic solution of the problem of determining the diffracted beam intensities for atoms incident upon a grating given by the potential, $v(x,y):=iV_0(e^{i\mathfrak{K}\,y}-1)$ for $0\leq x\leq\ell$ and $v(x,y):=0$ otherwise, where $V_0, \mathfrak{K}$, and $\ell$ are positive real parameters. This result, which relies on the paraxial approximation, readily applies to the diffraction of transverse electric (TE) waves by the nonmagnetic optical grating given by the relative permittivity, $\hat\varepsilon(x,y):=1-v(x,y)/k^2$, where $k$ is the incident wavenumber. We show that Berry's grating belongs to a larger class of possibly magnetic diffraction gratings whose scattering problem for both TE and transverse magnetic (TM) waves are exactly solvable. Our analysis makes use of a recently developed dynamical formulation of stationary scattering that is based on the idea of mapping the scattering problem to the quantum dynamics generated by an effective non-Hermitian Hamiltonian operator. {We use this formulation to derive explicit analytic expressions for the diffracted beam amplitudes that are valid beyond paraxial approximation.} As a concrete example, we offer the exact solution of the scattering problem for TE and TM waves incident upon a generalization of Berry's grating.

Direct Measurement of Out-of-Plane Thermal Conductivity via Transient Depth Thermography

2026-07-14T20:52:28Z

Accurate measurement of out-of-plane thermal conductivity remains challenging, particularly for multilayer thin-film materials, due to the reliance of existing techniques on indirect, surface-sensitive observables. Here, we introduce transient depth thermography, a non-contact spectroscopic method that directly reconstructs spatiotemporal temperature profiles using time-resolved thermal radiation. By leveraging the wavelength-dependent optical penetration depth, the technique encodes depth information into the emission spectrum, enabling direct access to internal heat transport dynamics. We demonstrate the method on fused silica and MgF2, achieving agreement with established techniques while attaining an uncertainty of 2-5%. In addition, we measure the temperature-dependent thermal conductivity of MgF2 over a broad temperature range. Applicable to both bulk and thin-film systems, transient depth thermography provides a general and accurate framework for thermal characterization of complex materials.