https://arxiv.org/api/CkK4xDqUakMHFhgu5EUfaybbBdM2026-09-11T20:43:54Z580803015http://arxiv.org/abs/2609.10061v1Transition of Photonic Dissipative Dynamics through the Exceptional Point2026-09-09T11:34:55ZThe decay of light in an optical structure depends not only on the intrinsic properties of the material but also on the surrounding electromagnetic environment. This principle has laid the foundation for the engineering of dissipation in photonic emitters. In the conventional wisdom, dissipation is governed by a fixed set of decay channels, each defined by the eigenstates of the structure, and energy leaks through and interacts with these channels. Here we provide experimental evidence that this paradigm fails in non-Hermitian systems. Specifically, we observe an accelerated transient decay in a pair of coupled microcavities tuned near the exceptional point, revealing that photonic dissipation can be governed not by reconfiguring existing loss channels, but rather by restructuring the underlying state space. The universality of this phenomenon is corroborated through two independent control parameters.The finding provides a new perspective on dissipative dynamics in open optical systems and offers a distinct mechanism for controlling transient decay in ultrafast photonic systems.2026-09-09T11:34:55ZYue CuiRuihen JinXiong JiangKaiyang WangCan HuangQinghai Songhttp://arxiv.org/abs/2609.10011v1Non-Hermitian Light Beams2026-09-09T10:41:26ZNon-Hermitian systems provide remarkable features actively studied in modern photonics. Non-Hermiticity is often related to the properties of open structures and devices, which involve lossy and gain channels. Here, we reveal that electromagnetic fields themselves can be designed in a non-Hermitian way, proposing an additional degree of freedom in non-Hermitian physics. Within classical electromagnetic wave theory, we show that the non-Hermitian behaviors may stem not only from the dispersive properties of the waves, but also from the peculiarities of the light spatial spectrum and local structure of the fields. For the nondiffracting light beams, we identify exceptional points detaching symmetric and asymmetric non-Hermitian phases related to the shape of the beam's intensity profile, the non-Hermiticity being well recognized only for non-paraxial beams. In the local structure of the electromagnetic fields and Poynting vector, we determine exceptional lines differentiating non-Hermitian phases stemming from the behavior of streamlines. We believe that the concept of non-Hermitian light beams will enrich our knowledge of the light-matter interaction.2026-09-09T10:41:26Z13 pages, 8 figuresAndrey NovitskyDongliang GaoIryna KaputskayaDawei LiAndrey BogdanovLei GaoMikhail Rybinhttp://arxiv.org/abs/2609.09939v1Image recognition based on optical spike processing with exciton-polaritons2026-09-09T09:29:58ZExciton-polariton condensates combine ultrafast dynamics with strong optical nonlinearities, making them promising for optical neuromorphic computing. Here, we numerically demonstrate image recognition using the transient response of an exciton-polariton condensate. Downscaled MNIST images are encoded as optical pulse sequences, and the resulting condensate dynamics are sampled and processed by a linear classifier. For ten-class classification, condensate features achieve 92.2% accuracy, compared with 91.4% for raw-pixel linear classification. Combining both feature sets increases the accuracy to 93.2%. For the challenging binary classification of digits 7 and 9, the combined model reaches 97.3%, exceeding both the linear (95.5%) and feed-forward neural-network (96.6%) baselines. These results demonstrate that polariton dynamics can extract useful nonlinear features for ultrafast optical information processing.2026-09-09T09:29:58Z6 pages, 9 figures, 1 tableOlgierd JeziorskiJakub RogalaKrzysztof Tyszkahttp://arxiv.org/abs/2604.14744v3Inverse design of exceptional points in a single-resonance two-port network2026-09-09T08:03:20ZExceptional points (EPs) in non-Hermitian photonic systems enable unconventional control of wave amplitude and phase. However, identifying the EPs in a multidimensional parameter space of a system can be nontrivial and, in some cases, even infeasible. Here we propose an inverse-design method to efficiently locate the scattering EPs for a two-port resonant system supporting a single mode. The proposed method provides a direct way for tuning of geometric parameters to realize scattering EPs, as confirmed by both full-wave simulation and equivalent circuit model. In principle, our method is compatible with multi-mode system and applicable to a broad class of resonant systems.2026-04-16T07:56:49Z9 pages, 4 figuresY. F. LiBiao ChenY. WuY. LiuH. LinBin Zhouhttp://arxiv.org/abs/2609.09825v1Stable vortex soliton arrays in disclination-fractal systems2026-09-09T07:28:27ZVortex light fields carry orbital angular momentum and have attracted significant attention because of their wide applications in light field manipulations, optical communications, and quantum information processing. In nonlinear media, the balance between diffraction and self-action enables the formation of vortex solitons. However, achieving the stability of vortex solitons remains challenging due to radial and azimuthal modulation instabilities. Here, we report stable vortex solitons and vortex-soliton arrays in disclination-fractal configurations with different rotational symmetries, constructed by applying disclination operations to fractal lattice structures. The stable vortex-soliton arrays---composed of several vortex solitons---can exist along domain walls, resulting from the disclination operation applied to the topologically trivial phase. Their stability is verified through both linear stability analysis and direct simulations of perturbed propagation. For comparison, vortex-soliton arrays in conventional disclination configurations are found to be completely unstable, demonstrating the significance of the fractal configuration in stabilizing these nonlinear states. These findings reveal a new nonlinear excitation mechanism arising from the interplay between fractal geometry and disclination defects, thereby providing theoretical underpinnings for both the improved understanding of multi-field excitation phenomena in complex geometric systems and opening new avenues for the design of photonic devices based on fractal disclination structures.2026-09-09T07:28:27Z11 pages, 10 figuresPhotonics Research 14, 4131-4140 (2026)Shuang ShenMilivoj R. BelićCe ShangYongdong LiYiqi Zhang10.1364/PRJ.608032http://arxiv.org/abs/2609.09810v1Resonant subspace approximation for photonic crystal slabs2026-09-09T07:10:46ZResonant approximations are indispensable for the interpretation and efficient modeling of photonic crystal slabs, yet most of them describe an eigenmode as a pole in the complex energy plane at a fixed set of the remaining parameters. Tracking such poles and their hybridization across the Brillouin zone or upon variation of structural parameters is labor-intensive and severely limits the use of resonant approximations in band-structure calculations and structural optimization. Here we introduce a resonant subspace approximation that treats the photon energy and all other parameters on an equal footing. Considering a wide class of photonic crystal slabs that can be split into two non-resonant parts, we show that their resonances arise solely from the round-trip propagation of coupled Fourier harmonics between these parts, in direct analogy with Fabry--Pérot and waveguide modes. We generalize the scalar round-trip phase to round-trip and phase matrices, whose smooth dependence on all parameters allows us to project the problem onto a small resonant subspace defined at a single anchor point and to extrapolate it throughout a local region of parameter space of arbitrary dimensionality. As a result, rigorous computations at only a few points suffice to reconstruct the band structure, modal linewidths, complex hybridization, and optical spectra as functions of energy, wavevector, geometric dimensions, or permittivity within seconds. We demonstrate the accuracy and versatility of the approach on a strong hexagonal silicon grating, resolving intricate mode hybridization, symmetry-protected features, and subtle geometry-controlled effects that are hardly accessible to straightforward computations. The method is fast, accurate, and readily extensible, offering a practical route to the exploration, design, and optimization of resonant photonic crystal slabs.2026-09-09T07:10:46Z18 pages, 7 figuresNikolay A. GippiusIlia M. FradkinNatalia S. SalakhovaSergey A. Dyakovhttp://arxiv.org/abs/2607.04682v2All-optical control of coherent perfect absorption via frequency conversion2026-09-09T06:37:46ZCoherent perfect absorption (CPA) extinguishes optical fields through interference and dissipation, but conventional implementations rely on material loss that is largely fixed after fabrication. Here we demonstrate all-optically controllable CPA based on frequency conversion in a periodically poled lithium niobate waveguide resonator. Pump-driven frequency conversion couples a resonant signal field at 1581 nm in the main system to a non-resonant environmental mode at 780 nm, creating a dynamically tunable effective loss channel. The nonlinear cavity acts as a tunable lossy beamsplitter without intrinsic material absorption. Under coherent two-sided signal injection, we observe up to 92 % absorption. We further introduce environment-assisted CPA by injecting an external field into the frequency-converted environmental mode, turning the environment from a passive loss reservoir into an addressable coherent control port. Our results establish a frequency-conversion-based platform for all-optical control of dissipation in CPA, combining pump-tunable loss with environment-assisted coherent control.2026-07-06T05:11:30Z8 pages, 7 figuresRikizo IkutaHirokazu KobayashiHiroki Takahashihttp://arxiv.org/abs/2609.09771v1Facile hBN-hBN Interfacial Overlap Engineering for Enhanced Quantum Emitter Formation2026-09-09T06:17:41ZQuantum emitters in two-dimensional materials, particularly hBN, are promising platforms for quantum technologies. However, achieving high-density emitters at predetermined locations while preserving optical quality remains challenging. Here, we introduce a facile, cost-effective double-layer all-dry transfer approach to deterministically create overlap regions between hBN flakes. These pre-defined capped regions exhibit a significantly enhanced emitter density, with up to a 15-fold increase compared to uncapped areas. Importantly, this method does not compromise emitter quality: emitters within overlap regions demonstrate excellent optical performance, including high signal-to-background and signal-to-noise ratios, large Debye-Waller factors, high brightness, and strong spectral stability. Possible defect configurations are also discussed to contextualize the observed emission characteristics. This scalable strategy enables preferential formation of quantum emitters in targeted regions, achieving higher densities than simple treatments such as plasma irradiation while avoiding the complexity of advanced fabrication techniques. The approach provides a practical pathway for integrating high-quality quantum emitters into scalable quantum photonic platforms.2026-09-09T06:17:41ZNhat Minh NguyenTrung Vuong DoanMd Shakhawath HossainAkila ElangasingheDuc Anh NgoHa Ngoc Duy HuynhThi Ngoc Anh MaiYongliang ChenKenji WatanabeTakashi TaniguchiMichael G. RuppertChaohao ChenXiaoxue XuToan DinhToan Trong Tranhttp://arxiv.org/abs/2609.09605v1Heteroepitaxial Growth of PbSe on InP Substrates via Lattice-Matched III-V Buffer Layers2026-09-09T01:57:08ZDetector cost remains a barrier to the widespread adoption of mid-wave infrared (3-5 micron) technology. PbSe, an inexpensive narrow band gap IV-VI semiconductor that has been used since the early 1940s, delivers high performance for infrared detection despite the abundance of grain boundaries in polycrystalline films. Epitaxial growth, however, could provide superior crystalline quality and interfaces, but suitable substrates remain limited for PbSe. Recent PbSe heteroepitaxy has focused primarily on III-V, II-VI and group-IV substrates that each offer a comparatively narrow range of lattice-matched alloys for heterostructure engineering. Here we show that InP-based heteroepitaxy provides access to a broader materials platform while limiting the lattice mismatch with PbSe to approximately 4%. We grow 150-nm thick PbSe films by molecular beam epitaxy on 200-nm thick In0.53Ga0.47As and In0.52Al0.48As buffers on (001) InP substrates. Reflection high-energy electron diffraction and X-ray diffraction show (001)-oriented rock-salt PbSe with an out-of-plane lattice constant of 6.12 Angstrom on both buffers. Photoluminescence (PL) is observed from room-temperature down to 12 K and the peak wavelength red-shifts from 3.7 to 5.0 microns. Under identical measurement conditions, the room-temperature peak PL intensities from films on In0.53Ga0.47As and In0.52Al0.48As are approximately 1.9x and 1.3x that of a PbSe on GaAs substrate reference, respectively. These results establish an InP-compatible platform for integrating narrow band-gap PbSe with a broad range of ternary and quaternary III-V alloys, including, for example, structures in which In0.53Ga0.47As serves as both a short-wave infrared absorber and a template for PbSe growth.2026-09-09T01:57:08ZBiridiana RodriguezMark MartinoBrody YeungBenjamin SprengerLeland Nordinhttp://arxiv.org/abs/2602.00363v2Microscopy of Bioelectric Potentials using Electrochromism2026-09-08T22:53:06ZStudying the electrical signals generated by living cells is key to understanding numerous biological phenomena. Electrochromic optical recording (ECORE) uses the electrochromism exhibited by certain materials to noninvasively measure these signals in real time. In this work, we report on the development of ECORE based on a high-NA microscope objective. We demonstrate the recording of extracellular action potentials from cardiomyocytes with single-cell resolution and a high sensitivity of 6.3 μV. Combining ECORE with microscopy simplifies the optical setup, allows for the simultaneous imaging of specimens, and makes ECORE accessible to a broader community of researchers, allowing for a better understanding of the biological processes that are integral to life.2026-01-30T22:26:15ZBurhan AhmedErica LiuLothar MaisenbacherPengwei SunDana GriffithKenneth NakasoneAshwin SinghYuecheng ZhouBianxiao CuiHolger Müller10.1103/p947-mlybhttp://arxiv.org/abs/2607.02806v2Coupling loss and transmission in a multimode fiber-fed virtually imaged phased array (VIPA)2026-09-08T20:11:22ZThe Virtually Imaged Phased Array (VIPA) is a spectral disperser that has seen increasing adoption across various applications, including optical telecommunications, high-resolution spectroscopy, and LiDAR. Although VIPAs are typically fed by single-mode optical fiber in these applications, there is growing interest in using a multimode optical fiber feed to enable higher throughput. However, a multimode fiber feed introduces several challenges, one of which is a fundamental limit on how much light can be coupled into a VIPA. In this work, we derive a closed-form expression for the minimum tilt angle of a multimode fiber-fed VIPA required for no etendue coupling loss, and we show that this angle depends solely on the input fiber's etendue, the focal ratio of the injection cylindrical lens, and the VIPA's intrinsic parameters. Moreover, we derive the 2D and 3D etendue that can be coupled into a VIPA, as well as the VIPA's etendue coupling efficiency and total transmission, given a particular configuration. We validate our mathematical models using ray-tracing simulations in Zemax OpticStudio non-sequential mode. Our results provide practical guidance for the design of high-throughput optical systems based on multimode fiber-fed VIPAs.2026-07-02T22:45:11ZAccepted for publication in Optics ExpressOptics Express Vol. 34, Issue 19, pp. 35089-35114 (2026)Matthew C. H. LeungAndrew SzentgyorgyiColby JurgensonDavid Charbonneau10.1364/OE.608392http://arxiv.org/abs/2609.09312v1Non-Hermitian topology in driven-dissipative systems: correspondence with quantum correlations and a resource for entanglement2026-09-08T18:03:52ZDirectional amplification, in which signals are amplified selectively depending on their propagation direction, is a key resource for quantum information processing and stands in one-to-one correspondence with non-trivial non-Hermitian topology. So far, this correspondence has concerned the mean fields, and thus classical response. Here we turn to the quantum fluctuations, giving access to correlations and entanglement. For phase-preserving amplifiers, we derive analytic expressions for the normal and anomalous correlations, showing that non-trivial topology produces correlations that grow exponentially with the distance between modes and approach the largest values compatible with the uncertainty relations. The associated correlation length diverges at the topological phase transition. Entanglement nonetheless remains local, set by the competition between normalised anomalous correlations and the asymmetry of the mode occupations. For the bosonic Kitaev chain, a phase-sensitive amplifier, the system instead splits into two halves that are internally fully correlated yet mutually uncorrelated. Our work prepares the ground for exploring the quantum properties of non-Hermitian topological systems with state-of-the-art platforms such as cavity optomechanics and superconducting circuits.2026-09-08T18:03:52Zmain text: 9 pages, 5 figures. Comments welcome!Niladri ChakrabortyClara C. Wanjurahttp://arxiv.org/abs/2609.09006v1Stimulated Brillouin Scattering in InGaP-on-Insulator Waveguides2026-09-08T16:42:50ZStimulated Brillouin Scattering (SBS) is a nonlinear interaction between optical and acoustic waves in solids. First regarded as a parasitic process in optical fibers, it has gathered significant interest in microwave photonic applications such as optical signal processing and narrow linewidth lasers. While many Brillouin system demonstrations have been done on photonic chips, they struggle to provide simultaneous high Brillouin gain and narrow linewidth in a scalable platform, capable of integration with established photonic integrated circuits. Here, we present a novel integrated InGaP-on-SiO$_2$ platform, where a single crystalline InGaP waveguide layer offers superior material properties and strong nonlinearities to support SBS near 1550 nm wavelength. We demonstrate backward SBS with a measured high Brillouin gain coefficient of $588\, \mathrm{W}^{-1}\,\mathrm{m}^{-1}$ and a record narrow linewidth of 5.2 MHz at 9.346 GHz frequency shift. This work establishes a wafer-scale complementary metal-oxide semiconductor compatible fabrication process, paving a scalable path for high gain and narrow linewidth Brillouin photonics with applications such as precision signal processing.2026-09-08T16:42:50ZYuyang XueApplied Physics Division, National Institute of Standards and TechnologySchool of Electrical and Mechanical Engineering, Adelaide UniversityInstitute for Photonics, Advanced Sensing and Quantum TechnologiesLisa-Sophie HaerteisSchool of Electrical and Mechanical Engineering, Adelaide UniversityInstitute for Photonics, Advanced Sensing and Quantum TechnologiesInstitute of Photonics and Optical ScienceThe University of Sydney Nano InstituteRyan L. RussellInstitute of Photonics and Optical ScienceThe University of Sydney Nano InstituteChoon Kong LaiInstitute of Photonics and Optical ScienceThe University of Sydney Nano InstituteBenjamin J. EggletonInstitute of Photonics and Optical ScienceThe University of Sydney Nano InstituteMichael J. SteelSchool of Mathematical and Physical Sciences, Macquarie UniversityGlenn SolomonInstitute for Photonics, Advanced Sensing and Quantum TechnologiesDepartment of Physics, Adelaide UniversityKevin L. SilvermanApplied Physics Division, National Institute of Standards and TechnologyMoritz MerkleinInstitute of Photonics and Optical ScienceThe University of Sydney Nano InstituteAndreas BoesSchool of Electrical and Mechanical Engineering, Adelaide UniversityInstitute for Photonics, Advanced Sensing and Quantum TechnologiesNima NaderApplied Physics Division, National Institute of Standards and Technologyhttp://arxiv.org/abs/2609.08814v1Evaluating the predictive power of pump-probe imaging contrast of melanin for metastatic outcome: A 71-patient study2026-09-08T14:40:32ZSignificance: Most melanoma deaths arise from metastatic spread, yet current staging imperfectly identifies which primary tumors will progress. Melanin structure is altered during malignant transformation, and pump-probe microscopy (PPM) measures melanin excited-state dynamics in standard biopsy sections, offering molecular contrast that is complementary to morphology-based assessment.
Aim: To determine whether PPM-derived melanin excited-state dynamics in primary cutaneous melanoma can predict metastatic outcome.
Approach: We imaged unstained sections from 71 primary cutaneous melanomas and 18 melanoma metastases. Transient absorption curves were fit to a biexponential excited-state model, and the fit parameters were used as features for learning classifiers to predict metastatic outcome.
Results: Melanin dynamics separated primary from metastatic tissue: both excited-state lifetimes were shorter in primaries, with common-language effect sizes up to 0.26. The same parameters did not separate primary tumors by outcome (effect sizes 0.41-0.61), and univariate logistic regression found no significant association for either the excited-state lifetimes or the ESA/GSB ratio. The best classifier reached 74% patient-level accuracy (AUC 0.73), a plateau reached by several unrelated architectures.
Conclusions: PPM robustly distinguishes primary from metastatic melanoma tissue, consistent with progressive melanin disaggregation. While it is clear that pump-probe features of melanin thus correlate with tissue differences, melanin dynamics in single sections of the primary tumor, confounded by heterogeneity, do not give robust predictions of metastatic outcome.2026-09-08T14:40:32ZDavid GrassEmma BaoMartin C. FischerM. Angelica SelimGeorgia M. BeasleyWarren S. Warrenhttp://arxiv.org/abs/2606.26840v2Taming the single-cylinder scattering through time-modulation -- The role of the modulation phase2026-09-08T14:35:17ZDielectric particles with time-modulated electromagnetic properties exhibit intriguing scattering phenomena, entailing unique response and possibilities in meta-structures made of such particles. In this work, we investigate the scattering properties of an infinitely-long cylinder with periodically time-modulated permittivity. We demonstrate parametric scattering amplification, depending on the strength of the modulation, as well as controllable angular scattering pattern, ranging from enhanced forward to enhanced backward, or even scattering cancellation. This angular tunability is achieved through appropriate control of the modulation phase, highlighting its critical role in multi-modal time-modulated scattering systems.2026-06-25T10:26:26ZJ. YanI. KatsantonisM. MostafaV. AsadchyM. Kafesaki