https://arxiv.org/api/JkRGLI6CDiKXPkxo0/je/Ef3daE 2026-07-17T21:43:58Z 57169 15 15 http://arxiv.org/abs/2607.14780v1 2026-07-16T09:58:44Z

Bio-nanoparticles are pivotal to next generation nanotherapeutics, but providing single-particle biomolecular characterization remains a crucial challenge. Herein we present ultra-violet direct absorption microscopy (UV-DAM) to tackle this challenge. UV-DAM is based on a tailored illumination scheme for absorption-only imaging, combined with a custom deep UV light source. Combined, they provide biomolecular specificity with single particle sensitivity. As such, UV-DAM provides rapid, label-free, high resolution, biochemical imaging. Enabled by these capabilities, we implement the classic nucleic acid:protein absorption assay at the single virus level where we demonstrate UV-DAM's ability to distinguish empty from DNA-loaded viral capsids based on bimolecularly specific absorption fingerprints. UV-DAM presents the translation from bulk UV-visible spectrometry to single-particle assessment, a crucial advancement for nanomedicine characterization where particle loading efficiencies are often heterogenous. Beyond this, UV-DAM is applicable to a wide range of nanomaterials or investigation of biological process with high spatio-temporal resolution and intrinsic molecular contrast.

2026-07-16T09:58:44Z C. J. Richards D. van de Lockand D. Wolters M. Liebel http://arxiv.org/abs/2607.14767v1 2026-07-16T09:52:05Z

Photonic lanterns efficiently map input spatial modes to single-mode outputs for applications like high angular resolution imaging and nulling interferometry. However, manufacturing limits prevent full control over the device's mode transfer matrix at the design stage, making empirical characterisation essential. In this work we further analyse a dataset of direct measurements of a photonic lantern's principal modes using digital off-axis holography over a 73 nm range near 1550 nm. By analysing the electric field directly, we find that the principal modes are significantly more orthogonal than random vectors in a space of the same size, as expected for near-adiabatic devices. We propose metrics for quantifying this effect, noting that mode converters with orthogonal principal modes provide better conditioned inverse solvers. We also simulate additional measurements that characterisation systems could take, where the orthogonality would be leveraged to determine the relative phase between principal modes.

2026-07-16T09:52:05Z Proceedings for Optical and Infrared Interferometry and Imaging X (SPIE Astronomical Telescopes + Instrumentation) Adam K. Taras Barnaby R. M. Norris Christopher Betters Daniel S. Dahl Andrew Ross-Adams Peter G. Tuthill Jin Wei Sergio Leon-Saval http://arxiv.org/abs/2607.14761v1 2026-07-16T09:46:00Z

Label-free all-optical nanosizing approaches based on interferometric or darkfield-imaging infer size, composition, or shape from single-particle scattering signals, but these signals are inseparably coupled to the spatially non-uniform illumination profile of the imaging system. Existing normalisation strategies require directly measuring this illumination field, an approach that fails for background-free geometries, such as lightsheet-type illumination, where the field cannot be detected. Here we introduce a self-normalisation method that reconstructs the illumination profile directly from the scattering signals of many freely diffusing nanoparticles, requiring no additional hardware, calibration samples, or direct field measurement. Critically, our approach eliminates the particle-heterogeneity bias that otherwise corrupts such reconstructions, by normalising single-particle trajectories against each other in regions of spatial overlap, where distinct particles necessarily sample identical illumination and detection conditions. We validate this method for gold nanoparticles of various size in two- and three-dimensional geometries, including a 90° side-illumination configuration in which the illumination field is entirely undetectable by conventional means, and show that reconstructed profiles closely match ground-truth measurements, thus drastically reducing signal variability. Relying solely on the scattering signal already acquired for sizing, our approach is immediately compatible with existing interferometric and darkfield nanoscopy platforms and broadly extendable to other scattering or fluorescent modalities, including light-sheet microscopy.

2026-07-16T09:46:00Z D-Dré K. J. M. J. Braam Daan Wolters Matz Liebel http://arxiv.org/abs/2607.14759v1 2026-07-16T09:45:13Z

Programmable photonic interferometer meshes enable reconfigurable linear optical transformations, but their performance depends critically on accurate calibration of Mach-Zehnder interferometers and phase shifters. Conventional methods often require node isolation, dedicated routing paths, orthogonal training states, reference channels, or prior phase-voltage characterization, which become increasingly difficult in large thermally tuned meshes. We introduce a local variance-based self-calibration method using intensity-only measurements. Controlled phase perturbations are applied, and calibration points are identified from minima of the measured output-power variance. For Mach-Zehnder interferometers, the variance follows a characteristic |sin(theta)| dependence, allowing bar and cross operating points to be found without conventional node isolation. For phase shifters, balanced interference produces a complementary |cos(phi)| variance signature, enabling quadrature calibration through the same statistical principle. We validate the method experimentally on an 8 x 8 silicon nitride programmable photonic processor using a fully automated two-stage procedure. Starting from random phase settings, all Mach-Zehnder interferometers are calibrated first, followed by phase-shifter calibration under balanced-interference conditions. As a system-level test, we implement an embedded 4 x 4 Hadamard transformation on the 8 x 8 processor using a Clements decomposition. These results establish local output variance as a simple calibration observable for programmable photonic meshes. The method is compatible with discrete random phase ensembles and requires neither conventional node isolation nor orthogonal training fields, making it a practical calibration primitive for scalable self-stabilizing photonic processors.

2026-07-16T09:45:13Z Gökhan Elmas Igor A. Litvin Janis Nötzel http://arxiv.org/abs/2607.14751v1 2026-07-16T09:37:31Z

Wavefront shaping allows light to be focused through scattering objects. However, the wavefront correction found is only valid in a small region called the isoplanatic patch. Here we present a simple approach to extend this isoplanatic patch by shifting and scaling the corrected wavefront appropriately, demonstrating an 8.6-fold increase in the lateral scanning range and a 1.5-fold increase in the axial range through a scattering layer without the need to perform additional wavefront shaping measurements. Our findings agree well with a simple geometrical model that also allows us to extract the effective position of the scattering layer from the measurements.

2026-07-16T09:37:31Z Harish Sasikumar Gerwin Osnabrugge Kirsten Gerritsma Bahareh Mastiani Ivo M. Vellekoop http://arxiv.org/abs/2607.14704v1 2026-07-16T08:04:38Z

Quantum key distribution (QKD) can provide secret keys with security rooted in quantum mechanics, but operation alongside high-capacity classical traffic remains limited by the excess-noise budget of weak quantum states in conventional solid-core fiber. Here, we combine ultralow-loss anti-resonant hollow-core fiber with residual-carrier-assisted discrete-modulation continuous-variable QKD (DM-CV-QKD) to address both propagation-induced coexistence noise and low-SNR phase recovery. Over a 24.3-km hollow-core link with 3.3-dB end-to-end loss, a dual-polarization 15-Gbaud DM-CV-QKD channel achieves an average asymptotic secret-key rate (SKR) of 153.22 Mb/s and a finite-size SKR of 149.99 Mb/s, while 39 coherent wavelength-division-multiplexed channels deliver an aggregate data rate of 7.6 Tb/s and a net data rate of 7.2 Tb/s. The system can even sustain a positive SKR under a high classical launch power of up to 15 dBm, without an optical bandpass filter (BPF). Finite-size analysis against collective attacks further yields a projected positive secret-key rate at a 100-km-equivalent condition. These results show that an anti-resonant hollow-core fiber, combined with carrier-assisted phase recovery, can greatly extend the operating regime of shared-fiber quantum-secured coherent links, pointing to a promising approach for integrating high-rate CV-QKD with high-capacity optical networks.

2026-07-16T08:04:38Z Xitao Ji Siyu Chen Peng Li Mingming Zhang Yilun Chen Jun Gao Rui Lin Bacco Davide Siqi Yan Ming Tang http://arxiv.org/abs/2607.14678v1 2026-07-16T07:42:39Z

Two-dimensional (2D) Ruddlesden Popper perovskites are promising optoelectronic materials with strongly confined excitonic properties; however, probing their ultrafast carrier transport dynamics, particularly the initial nonequilibrium diffusion regime, remains challenging because conventional transient absorption microscopy requires complex spatial imaging and lacks sufficient temporal sensitivity to resolve early time diffusion dynamics. Here, we demonstrate a vortex beam based transient absorption microspectroscopy platform (VTAM) enabling imaging free measurement of carrier transport by encoding spatial diffusion information into the mode dependent pump probe signal. By employing vortex probes with different topological charges, VTAM provides mode selective spatial sensitivity to excitonic dynamics with subpicosecond temporal resolution. Using VTAM, we resolved rapid free exciton (FE) diffusion followed by relaxation toward a slower steady state transport regime. A theoretically derived time dependent diffusion model separated transient and steady state transport contributions, yielding a transient diffusion enhancement (68.84 cm2 per s) and a steady state diffusion coefficient (1.85 cm2 per s), thus providing an initial diffusion coefficient (70.69 cm2 per s), and a cooling time of 0.35 ps. Measurements at the exciton-polaron (EP) resonance revealed strongly suppressed diffusion with nearly time independent signal ratios, indicating lattice-coupled EP transport. These parameters were extracted without spatial scanning or image reconstruction, establishing V-TAM as a powerful imaging free platform for investigating carrier transport in perovskites and other semiconductor systems.

2026-07-16T07:42:39Z Ju-Young Kim Anirban Mondal Gi Rim Han Kwang Jin Lee Jong Min Lim Myeongsam Jen Minhaeng Cho http://arxiv.org/abs/2604.22301v2 2026-07-16T05:37:05Z

We demonstrate a suspended thin-film aluminum nitride (AlN) microbolometer for narrowband very long-wave infrared detection. The device uses a 100-nm-thick AlN membrane suspended above a Pt back reflector by a 1-um air gap. Resonant absorption is set by the AlN transverse optical phonon near 15.4 um and is strengthened by suspension above the reflector. A periodic perforation pattern reduces membrane thermal mass and enhances absorption without further thinning the film. DC resistance measurements under tunable infrared illumination verify bolometric operation, and the measured spectral response follows the absorption profile expected from spectroscopic measurement of passive devices. Narrowband response is observed in the 14--18 um range, with peak responsivity of 920.8 ppm/mW at 15.48 um. This platform can enable compact wavelength-selective thermal detectors for multispectral imaging, on-chip infrared spectroscopy, and chemical sensing.

2026-04-24T07:33:30Z 6 pages, 5 figures, submitted to Journal of Microelectromechanical Systems Vivek Tallavajhula Zarko Sakotic Ian Anderson Yinan Wang Daniel Wasserman Ruochen Lu http://arxiv.org/abs/2407.07872v3 2026-07-16T05:24:43Z

Light-in-flight (LiF) measurements enable the visualization of light paths through arbitrary, volumetric scenes, making light-matter interactions at ultrafast timescales visible. Traditionally, LiF measurements require specialized equipment, such as ultrashort pulse light sources and high-speed electronics, often limited by low spatial resolution. Herein, we introduce a novel computational approach, "Synthetic Light-in-Flight" (SLiF), that overcomes these constraints by relying solely on tunable, continuous wave (CW) lasers and off-the-shelf CMOS cameras. From multiple CW scene measurements at different optical wavelengths, we create multiple "synthetic fields," each at a "synthetic wavelength," which is the beat wave of two respective optical waves. These synthetic fields are robust to speckle and environmental fluctuations, enabling us to combine multiple synthetic fields into a "synthetic light pulse" that sections the volumetric scene at much lower instantaneous peak illumination power than a comparable physical light pulse. We experimentally demonstrate the generation of synthetic pulses with 1 ps-scale width and show that their complex synthetic pulse fields can be freely manipulated in the computer after their acquisition, allowing for spatial and temporal shaping of different sets of pulses from the same set of measurements to maximize the decoded information output for each scene. Finally, we show that the recovered time-of-flight information can be used to characterize physical scene properties, such as depth and refractive indices.

2024-07-10T17:39:33Z 13 pages, 8 figures and supplementary material Patrick Cornwall Manuel Ballester Stefan Forschner Muralidhar Madabhushi Balaji Aggelos Katsaggelos Florian Willomitzer http://arxiv.org/abs/2602.10066v2 2026-07-16T05:02:16Z

Matrix-vector multiplications are fundamental operations in artificial intelligence and high-throughput computations, and are executed repeatedly during training and inference. Their high energy cost in electronic processors motivate scalable photonic computing approaches that reduce the energy required per operation. Thin film lithium niobate is a dominant photonic platform due to its large electro-optic effect. However, it lacks nonvolatile index tuning mechanisms, which promise to pave the way for energy-efficient photonic computing. Here, we explore electrochemical lithiation as a route to nonvolatile matrix-vector multiplications in thin film lithium niobate. The lithium niobate phase is stable at room temperature over a 2% Li composition window with an associated composition-dependent refractive index. We computationally demonstrate this as a programmable, low-loss approach to perform matrix-vector multiplications by using composition to control matrix weights. We design Mach-Zehnder interferometers to perform image processing tasks under realistic material loss constraints. We also design microring resonators for iterative weight updates, using gradient descent training to program target matrix operations with matrix-vector multiplication accuracy validated at 1.6% average relative error. These demonstrations show a facile route towards nonvolatile photonic computing in thin film lithium niobate, addressing a critical requirement for energy-efficient photonic matrix operations at scale.

2026-02-10T18:33:28Z 20 pages, 4 figures Abhiram Devata Axel Magaña Ponce David Barton http://arxiv.org/abs/2607.14567v1 2026-07-16T04:48:30Z

The quest for superconductivity created by light extends for more than half a century, yet direct evidence of a true zero-resistance state -whose macroscopic quantum phase coherence is both created and controlled by light -- has remained elusive. Here we report for the first time on a complex but robust light-programmable superconducting (LiPS) state at an aluminium-silicon heterojunction that is created and fully controlled with femtosecond laser pulses. The superconducting critical temperatures -- ranging from 1.8-8.5 K, can be increased or erased at will by the application of tailored pulse sequences. At low temperatures the LiPS state shows features characteristic of a Berezinski-Kosterlitz-Thouless topological transition, but another distinct state appears at temperatures above 2 K, which shows clear signatures of quantum phase disorder. In the presence of a magnetic field we observe behaviour characteristic of vortex pinning and creep consistent with the 2-dimensional (2D) nature of the phase coherent system. The origin of the LiPS effect is attributed to light pulse control of the Moire-like superlattice of misfit dislocations (MDs) that naturally occur as a result of discommensurations between Al and Si lattices at the interface, and is clearly observable by high-resolution electron microscopy. We show how light pulses can be used to control the superlattice periodicity and highlight the appearance of topologically protected soliton-like kinks along the dislocation lines, important for imparting metastability to the system. The demonstration of LiPS opens a route to the design of metastable long-range phase coherent superconducting states, leading to light-engineering of quantum circuits, local gap tuning in quantum processors and novel devices utilizing switchable superconductivity.

2026-07-16T04:48:30Z 14 pages, 3 figures Viktoria Yursa Igor Vaskivskyi Anze Mraz Damjan Svetin Sergej Raznjevic Vinko Srsan Saso Sturm Tomaz Mertelj Mikhail Feigelman Dragan Mihailovic http://arxiv.org/abs/2607.14565v1 2026-07-16T04:46:30Z

Distributed Bragg reflectors (DBRs) are foundational building blocks of classical and quantum photonic technologies. However, their optical responses are typically fixed upon fabrication, limiting circuit robustness, reconfigurability, and functionality in applications from high-speed communications to quantum computing. Here, we demonstrate photonic chip-based programmable DBRs at telecommunications wavelengths, which are formed by electro-optically inducing refractive index contrast between periodic ferroelectric domains in thin-film lithium niobate waveguides. We achieve voltage-controlled Bragg reflection from zero to near-unity, and gigahertz-speed reflectivity modulation. Our results bring DBRs into the ultrafast programmable regime, opening new opportunities in topological photonics, cavity quantum electrodynamics, integrated lasers, and optical interconnects. The interplay between nanoscale ferroelectric domain engineering and strong electro-optic nonlinearity establishes a new design strategy for nanophotonic devices, otherwise inaccessible in bulk media.

2026-07-16T04:46:30Z Yunxiang Song Pawan Ratra Danxian Liu Jiayu Yang Zhongshu Liu Urban Senica Salma Mohideen Mingjie Zhang Xudong Li Donald Witt Joshua Mornhinweg Norman Lippok Eric Mazur Federico Capasso Marko Lončar http://arxiv.org/abs/2607.14526v1 2026-07-16T03:28:47Z

We propose a Bayesian co-optimization framework for robust integrated photonic lattice-filter demultiplexers, jointly optimizing device placement and design parameters under fabrication and thermal variations. Results show 75% better spectral matching and 45% lower calibration power.

2026-07-16T03:28:47Z Photonics in Switching and Computing Conference 2026 Zahra Ghanaatian Edwin K. P. Chong Mahdi Nikdast http://arxiv.org/abs/2607.14502v1 2026-07-16T02:37:16Z

In cavity optomechanics, the interaction between light and motion is usually introduced via the shift of cavity resonances in response to mechanical displacement. Here we present an analysis of Hamiltonian dynamics of an optomechanical system with a different form of optomechanical coupling, in which mechanical motion dynamically couples otherwise independent optical modes. In the language of Schwinger pseudospin operators, the dispersive coupling can be interpreted as "longitudinal" while the mode-coupling mechanism corresponds to a transverse interaction. The latter is well known in cavity and circuit QED but was given only scarce attention in cavity optomechanics. Unlike the traditional dispersive/dissipative coupling, the mode-coupling optomechanical interaction generates rich Hamiltonian dynamics even in the absence of external drive or dissipation. For instance, under certain initial conditions this dynamics is characterized by a Hamiltonian Hopf bifurcation controlled by the total photon power injected into the system. Below the bifurcation threshold and for large enough non-linearity, mechanical modulation of optical amplitudes generates a broad spectrum of multiple sidebands covering a frequency interval larger than ten mechanical frequencies. Above the threshold, the frequency of optical oscillations becomes dependent on the mechanical amplitude, while mechanical degrees of freedom return to oscillating at their bare frequency. The scope of this work is limited to the study of purely Hamiltonian dynamics to demonstrate that the mechanically mediated mode-coupling optomechanical interaction provides an alternative method of coherent control of energy exchange between light and mechanical motion.

2026-07-16T02:37:16Z 37 pages, 9 figures, Supplementary materials are included in the main file Satyam S. Jha Lev Deych http://arxiv.org/abs/2510.25102v2 2026-07-15T23:52:46Z

We demonstrate single-shot laser-pulse-induced magnetization reversal in rare-earth-free CoFeB/MgO magnetic tunnel junctions (MTJs), a material system widely adopted in spin-transfer torque magnetic random-access memory (STT-MRAM). By tuning the Ru capping layer thickness, we modify the laser energy absorption profile and observe magnetization reversal from the parallel (P) to antiparallel (AP) state, with switching observed for $t_\text{Ru} \geq 2.0\,$ nm. Furthermore, we detect magnetization reversal in a micro-scale MTJ device via the tunnel magnetoresistance (TMR) effect. Our findings suggest that ultrafast spin transport, dipolar interactions, or a combination of both may contribute to the switching process, although the precise mechanism remains to be clarified. This work represents a significant step toward integrating ultrafast optical control with MTJ technology.

2025-10-29T02:12:58Z 9 pages, 7 figures. To appear in APL Materials Junta Igarashi Sébastien Geiskopf Takanobu Shinoda Butsurin Jinnai Yann Le Guen Julius Hohlfeld Shunsuke Fukami Hideo Ohno Jon Gorchon Stéphane Mangin Michel Hehn Grégory Malinowski