Temperature and mean axial momentum vs. laser intensity of electrons released from O$_2$ by an 800 nm ultrashort pulsed laser

2026-09-10T17:45:33Z

A semi-empirical model is presented for the thermalized temperature $T$ and mean momentum in the direction of laser propagation <$p_{fz}$> of electrons released from O$_2$ after the passage of a focused 800 nm ultrashort pulsed laser pulse vs. peak laser intensity $I_0$ to provide initial conditions for plasma electrodynamic simulations. For this, theoretical kinetic energy spectra based on the most probable ionization path of a nonadiabatic Strong Field Approximation (SFA) are fit to experimental spectra by two adjustable parameters assumed to represent the effects of electron recombination with or rescatter off of its parent ion during the optical cycle subsequent to ionization. These are effects not treated by the original SFA. The classical kinematics of elastic rescatter and the Lorentz force, then, are used to estimate <$p_{fz}$>.

Sub-cycle doublon-holon dynamics in one-dimensional Mott insulators revealed by two-color high-harmonic spectroscopy

2026-09-10T17:39:14Z

Solid-state high-harmonic spectroscopy is becoming an emerging tool for probing nonequilibrium many-body dynamics. Yet, direct measurements of strongly driven, sub-optical-cycle dynamics in correlated materials during high-harmonic emission remain largely unexplored. Here, we measure high-harmonic emission chirp in a prototypical one-dimensional Mott insulator, which encodes strongly driven doublon-holon dynamics at sub-optical-cycle timescales. We observe a positive chirp for above band gap harmonics, indicating that high harmonics are dominated by doublon-holon recombinations. We further show a harmonic order-dependent dephasing, which can be understood through different doublon-holon excursion distances associated with each harmonic. These results reveal coherent doublon-holon dynamics and their ultrafast dephasing in Mott insulators, which is relevant to other nonequilibrium light-induced phenomena, such as Floquet engineering.

Designing metallo-dielectric antennas for cryogenic applications

2026-09-10T17:04:19Z

We present the design of cryogenic metallo-dielectric antennas tailored to single organic emitters, where the choice of host material imposes specific constraints on the antenna geometry. Using dibenzoterrylene (DBT) in para-dichlorobenzene (p-DCB}) as a model system, we show that photon collection efficiencies exceeding 90% can be achieved for arbitrary dipole orientations of the fluorescent molecule. The antenna design is intrinsically broadband and tolerant to emitter positioning within the structure. We further provide concrete fabrication guidelines for the full antenna architecture, and experimentally demonstrate its operating principle by recording a back-focal-plane image (BFP) of a single molecule inside a fabricated antenna.

Design and simulation of highly selective graphene-silicon nitride integrated dual-mode electro-absorption modulators

2026-09-10T16:15:28Z

We present the design, simulation and optimization of an integrated graphene-silicon nitride dual-mode modulator with high mode selectivity, optimized for a wavelength of 1.55 $μ$m. The proposed device finds applications in mode division multiplexing systems, enabling the simultaneous and independent switching of two transverse electric modes supported by a buried dual-mode silicon nitride waveguide (TE$_0$ and TE$_1$). Three graphene-Al$_2$O$_3$-graphene nanoribbons are integrated on top of the waveguide. A central nanoribbon acts as a TE$_0$ mode absorber, while the two remaining nanoribbons located on the sides act as TE$_1$ mode absorbers. Their absorption is tuned by modifying the Fermi energy of graphene, which can be achieved through electrical doping. Thus, the corresponding nanoribbons operate as selective TE$_0$ and TE$_1$ modulators with a total energy consumption per unit length under 2430 pJ bit$^{-1}$ cm$^{-1}$. The modulation depth of each mode can reach up to 316 dB/cm and 273 dB/cm, respectively, while maintaining a selection ratio of 5.63$-$6.28 and extinction ratio of 204$-$248 dB/cm between them. Under thinner Al$_2$O$_3$ conditions, consumption below 607.5 pJ bit$^{-1}$ cm$^{-1}$ can be achieved with a marginal reduction of the optical performance in the TE$_1$ modulator. Overall, we report the design of a fully optimized integrated dual-mode modulator based on graphene tunable electro-absorption, opening the path toward integrated efficient multimode optical communication systems.

Amplification of Weak Forces via Parametric Interactions and Non-Markovian Effects in Cavity Optomechanics

2026-09-10T15:32:29Z

Weak force amplification describes the process of amplifying a faint low-frequency signal by means of an additional high-frequency modulation, which plays a vital role in quantum sensing and high-precision measurement. However, the potential enhancement of weak-force amplification in non-Markovian environments has received little attention. In this paper, we firstly study the amplification of weak forces within cavity-optomechanical systems incorporating a degenerate optical parametric amplifier (DOPA) under the Markovian assumption. The results show that the weak force can be effectively amplified by using two high-frequency signals via vibrational resonance through adjusting the strength and phase of the DOPA with different pumping frequencies. Moreover, we extend the study of the amplification of the weak force to the non-Markovian environment which consists of a collection of infinite oscillators. We illustrate that the amplification exhibits a conversion from the non-Markovian regime to Markovian regime by controlling environmental spectral width. This conversion leads to enhancements of amplification, which originates from the excitation backflow obtained through the interaction between the cavity and non-Markovian environment. By controlling DOPA to amplify weak forces, the study achieves amplification in the non-Markovian regime, offering new directions for quantum optics research.

Intensity-guided pose-free multiview fusion for single photon sensing

2026-09-10T14:29:53Z

Single-photon light detection and ranging (LiDAR) extends active three-dimensional sensing at the fundamental level and has found applications in extreme environments involving long-range operation, low-reflectance targets, and adverse visibility. However, the acquired measurements often give rise to single-photon point clouds that are sparse, spatially non-uniform, and corrupted by outliers and depth distortions, making multi-view registration challenging especially when sensor poses are not accurately known. In this work, we present a geometry-intensity coupled registration framework (GIC-Reg) of pose-free multi-view fusion for single-photon sensing. It is established by combining physical-aware preprocessing, joint geometry-intensity grid feature aggregation, global matching, and local ambiguity disambiguation to estimate inter-view rigid transformations and hence to construct a globally consistent reconstruction. On the synthetic benchmark, it admits the lowest relative rotation error (RRE), relative translation error, and root mean square error across all background-noise and dropout rates, in comparison to baselines. Notably, under the most degraded dropout, it reduces the RRE from $13.167^\circ$ to $8.459^\circ$ compared with the learning-based baseline. Furthermore, experimental results on real multi-view data acquired at about 80~m show that it achieves more reliable global orientation and local alignment. Our results show that photon intensity provides an effective physical cue for stabilizing multiview registration in single-photon point cloud, and thus our work aids significant progress in exploring practical utility of single-photon sensing.

Heterogeneously Integrated Efficient and Widely Tunable Lasers at 795 nm for Rubidium-Based Quantum Technologies

2026-09-10T14:17:54Z

Scaling quantum processors and optical atomic clocks fundamentally requires orders-of-magnitude reductions in the size, weight, power, and cost of optical control systems. Photonic integration of lasers is critical to fulfill these requirements. At the near-infrared wavelengths required for atomic clocks and quantum computing through manipulation of rubidium atoms, laser integration is hindered by difficulty in light coupling and poor heat dissipation. Here, we introduce a wafer-scalable method utilizing micro-transfer printing to integrate GaAs-based amplifiers in etched recesses, directly butt-coupled to silicon nitride waveguides. We demonstrate extended-cavity single-mode lasers using this integration approach. Our compact microgear laser achieves a narrow 3 kHz fundamental linewidth at an on-chip output power of >22 mW -- a record for a single-mode heterogeneously integrated laser in the 780-800 nm band -- with a wall-plug efficiency of 9.4%, showcasing the high-power and efficiency potential of this integration approach. Additionally, we demonstrate a widely tunable laser leveraging Vernier filters to achieve lasing with 9 nm coarse tuning, a quasi-continuous fine-tuning range exceeding 140 GHz, and a mode-hop-free tuning range of 45 GHz. Our scalable integrated laser toolkit shows great promise for replacing macroscopic external-cavity diode lasers in next-generation quantum technologies and optical atomic clocks.

Temporal Localisation of Waves from Imaginary Line-Gap Topology

2026-09-10T14:11:07Z

For non-Hermitian Hamiltonians, gain, loss, and non-reciprocity produce complex eigenvalues which, in turn, facilitate different kinds of topological phases. One example is the imaginary line-gap phase, where eigenvalues cannot lie on the real line. This notion was recently shown to explain the robust temporal localisation of waves in photonic quantum walks and time-varying metamaterials. In these systems, waves localise around a time interface between topologically inequivalent mediums. At the core of this phenomenon is a $\mathcal{PT}$-symmetric two-mode model, where the non-trivial topology arises due to the $\mathbb{Z}_2$ classification of the AI symmetry class. In this work, we study two-mode models in all non-Hermitian symmetry classes. We find that robust temporal localisation generically follows as a physical consequence of imaginary line-gap topology according to a simple diagnostic: at least one of time-reversal symmetry ($\mathcal{T}^{\hspace{0.05em}2} = 1$) and particle-hole symmetry ($\mathcal{C}^2 = 1$) must be present. Our results provide a comprehensive symmetry-based guide to the observation of the topologically protected temporal localisation of waves.

Physics-constrained neural networks for surrogate modeling of lossless periodic structures

2026-09-10T13:34:16Z

We introduce a physics-constrained neural network for the rapid prediction of rigorous coupled-wave analysis outputs in the form of Jones matrices. Starting from energy conservation in lossless layered periodic structures, we use the fact that the scattering outputs lie on a Stiefel manifold. This energy constraint is enforced as a hard condition by projecting onto the manifold using differentiable symmetric orthogonalization. The resulting surrogate enforces energy conservation by construction while preserving differentiability for gradient-based inverse design. The performance and generality of the proposed approach are demonstrated through the inverse design of a diffractive waveguide combiner for augmented reality glasses.

Antimony for broadband nanophotonics across the ultraviolet, visible and infrared

2026-09-10T13:09:05Z

Semimetal elemental antimony (Sb) nanostructures show great potential for applications where nanophotonic properties play a key role, such as phase-change optical memories, non-linear optical elements, photothermal therapy agents, photodetectors and photocatalysts. However, designing advanced Sb-based photonic devices critically requires an accurate and reliable knowledge of the optical response of bulk and nanoscale Sb. Herein, we report for the first time a fully consistent and accurately measured dielectric function for Sb nanoscale films in a wide spectral range from the ultraviolet to the far infrared (4 - 0.04 eV, i.e. ~ 0.3 - 30 $μ$m), surpassing previous reports that explored a limited spectral range. It is found that the Sb spectral response is driven exclusively by giant interband transitions in the visible up to mid infrared (4 - 0.4 eV, i.e. ~ 0.3 - 3 $μ$m), and that their contribution dominates over that of free carriers down to 0.12 eV (i.e. ~ 10 $μ$m). Such spectral response enables Sb nanostructures to display spectrally selective and tunable nanophotonic resonances. First, we showcase interband plasmonic resonances in the visible-to-near infrared for Sb nanogratings. Second, we report giant refractive index dielectric resonances in the mid infrared for nanostructured Sb/dielectric/metal resonant cavities. These findings open a pathway to optimized planar Sb nanoscale designs enabling a tailored light-matter interaction, which will be useful for integrated data, telecom, medical, optoelectronic and energy conversion devices operating in a broad spectral range.

The Quantum Plumber's Problem

2026-09-10T11:47:33Z

Recent work quantified the notion of quantum counterfactual gain for an extended Elitzur-Vaidman bomb test style scenario, through a connection to the negativity of the Kirkwood-Dirac quasiprobability distribution. We here extend this work to identifying quantum advantage in a new scenario, which we term the ``Quantum Plumber's Problem''. In this scenario, we imagine a ``quantum plumber'', who knows that one path of an interferometer is blocked, and wants to find the optimal strategy for identifying with certainty which path this is. We discuss various strategies for a generalised path-encoded interferometer, as well as for the specific case of Hofmann's three-path interferometer, introduced in a recent analysis of the relationship between states in five measurement contexts of a three level system. We support our arguments on the relative merit of competing strategies with data collected over many simulated attempts at locating blockages. We also present results for a variant of the game in which the blockage is replaced by a non-demolition detector.

A Two-Mirror Faceted Projection System for EUV Lithography

2026-09-10T09:28:02Z

We propose an all-reflective two-mirror projection system for extreme ultraviolet (EUV) lithography operating at exposure wavelengths of $13.5$~nm (Mo/Si) and $11.2$~nm (Ru/Be), delivering a fourfold ($4\times$) demagnification of the periodic mask pattern at a numerical aperture approaching unity ($\mathrm{NA}_{\max} \approx 0.993$). In contrast to conventional EUV projection objectives that incorporate 6--10 aspheric mirrors with an overall optical throughput of less than $15\%$, the proposed design redirects each accepted discrete spatial diffraction order scattered by the mask onto the wafer via a dedicated pair of planar mirror facets. The number of reflections is strictly fixed at two for all accepted orders, retaining $50$--$60\%$ of the power leaving the mask in each accepted order. We derive a spatial geometry providing rigorous optical path length equalization across all diffraction orders, thereby removing order-dependent propagation phase shifts. Individually optimized 30-bilayer Bragg multilayer coatings are designed for each facet using the transfer matrix method combined with global evolutionary optimization algorithms. The architecture is generalized to a three-dimensional vector formulation with a two-dimensionally periodic mask. Utilizing inverse lithography technology, Fourier parameterization, and a differentiable electromagnetic modal waveguide solver, we solve the synthesis problem for binary absorber masks (La absorber on a Ru/Be/Sr multilayer mirror). We demonstrate simulated aerial images of sub-10-nm features on the wafer (isolated peaks with a full width at half maximum (FWHM) of approximately $5.4$~nm and line pairs with a critical dimension of $6$~nm) and find that the two peaks remain resolved for the tested wafer defocus values from $0$ to $5$~nm along the $z$-axis.

Self-powered InAs nanowire detector arrays for extended-SWIR spectrometry at room temperature

2026-09-10T08:57:34Z

Spectral sensing in the extended shortwave infrared (e-SWIR) is important for molecular analysis, infrared imaging, and machine vision, motivating the development of compact spectrometers for broader applications. However, conventional commercial off-the-shelf spectrometers in this wavelength region are expensive and bulky due to their reliance on external dispersive optics/filters and/or cryogenic accessories. Other emerging computational spectrometers are based on Si and InGaAs photodetectors that remain focused on the visible and near-infrared, with few detector platforms operating in the e-SWIR regime that simultaneously provide broadband sensitivity, low-noise room-temperature operation, and diverse spectral signatures for accurate identification and reconstruction. Here, we report a room-temperature e-SWIR computational spectrometer based on InAs/InP core-shell nanowire photodetector arrays with geometry-encoded spectral responses. The detectors exhibit self-powered broadband photoresponse across the 1--3 $μ$m range, with responsivity up to 0.215 A W$^{-1}$, detectivity up to $1.6 \times 10^{9}$ cm Hz$^{1/2}$ W$^{-1}$, and microsecond response times. The excellent detector performance is leveraged to demonstrate filter-free spectral reconstruction using a compact multipixel photodetector array device. This enables high-accuracy molecular absorption spectrum reconstruction and hyperspectral imaging. Our results indicate that InAs nanowire arrays are a promising platform for compact computational spectrometry and imaging in the e-SWIR at room temperature.

Two-step high-accuracy microwave frequency measurement and time-frequency analysis based on optical frequency combs

2026-09-10T08:11:54Z

Broadband microwave frequency measurement and time-frequency analysis are crucial for applications such as electronic warfare. However, when it comes to ultra wideband signal analysis, traditional electronic methods have high analysis accuracy, but intrinsic electronic bottlenecks limit their real-time analysis. Here, we propose and experimentally demonstrate a two-step microwave frequency measurement and time-frequency analysis method based on optical frequency combs. The system first performs coarse frequency localization over the 0-40 GHz range using stimulated-Brillouin-scattering-assisted frequency-to-time mapping (FTTM) and dual-comb channelized reception. The dual-comb is then reapplied for downconverting the signal under test, followed by digital signal processing to achieve high-accuracy unambiguous frequency extraction. Experimental results show that the system achieves mean single-tone frequency measurement errors of less than 10 kHz over 0-40 GHz. We further experimentally measure multi-tone, linearly frequency-modulated, and V-shaped frequency-modulated signals, demonstrating the proposed method's capability for analyzing complex signals.

Slow Light Augmented Fabry-Perot Cavity for Enhanced Sensitivity in Measuring Frequency Shift

2026-09-10T06:51:11Z

Recently, it has been shown that a slow-light augmented unbalanced Mach-Zehnder interferometer (SLAUMZI) can be used to enhance significantly the sensitivity of measuring the frequency shift of a laser, compared to the heterodyne technique. Here, we show that a similar enhancement can be realized using a slow-light augmented Fabry-Perot Cavity (SLAFPC), due to the fact that an FPC is inherently unbalanced, since different bounces of the field traverse different path lengths before interfering with the other bounces. We show how the degree of enhancement in sensitivity depends on the spectral width of the laser and the finesse of the FPC. For potentially realizable conditions, we show that a sensitivity enhancement factor ~2.8*10^6 can be achieved using a SLAFPC.