https://arxiv.org/api/8RITaI1mOqZX0PeutxQ1H7OcSkk2026-06-24T08:46:00Z900172015http://arxiv.org/abs/2509.07313v2Progress in SPECT and PET Reconstruction for Theranostics: From Diagnosis to Therapy2025-11-14T13:54:53ZThe theranostic paradigm enables personalization of treatment by selecting patients with a diagnostic radiopharmaceutical and monitoring therapy using a matched therapeutic isotope. This strategy relies on accurate image reconstruction of both pretherapy and post-therapy images for patient selection and monitoring treatment. However, traditional reconstruction methods are hindered by challenges such as crosstalk in multi-isotope imaging and extremely low-count measurements data when imaging of alpha-emitting isotopes. Additionally, to fully realize the benefits of new imaging systems being developed for theranostic applications, advanced reconstruction techniques are needed. This review highlights recent progress and discusses critical challenges and unmet needs in theranostic image reconstruction.2025-09-09T01:26:57ZKweku EnninfulFardeen AhmedBradley GirodRichard LaforestDaniel L. J. ThorekVikas PrasadAbhinav K. Jhahttp://arxiv.org/abs/2511.11303v1Mathematical and numerical methods for accurate aorta segmentation from non-enhanced CT Data yielding reliable identification and evaluation of large vessel vasculitis2025-11-14T13:42:08ZSegmentation of the aorta is crucial for various medical analyses, such as the diagnosis and treatment of cardiovascular diseases. This work presents mathematical models and methods yielding a semi-automatic segmentation of the aorta from non-enhanced CT data. Our framework consists of three steps. First, using the minimal path approach, we extract a path within the aorta from two user-supplied points. Then, using 3D Lagrangian curve evolution, we move the initial path to the approximate centerline of the aorta. The centered path is used in the last step to construct the initial condition for the generalized subjective surface method (GSUBSURF). Applying the GSUBSURF method with this initial condition yields an accurate segmentation of the aorta. The segmentation results and the manual segmentations overlap, with a worst-case mean Hausdorff distance of $2.175 \pm 0.605$ mm for a voxel spacing of $0.977$ mm. Using the aorta centerline and segmentation, we define precise regions of interest along the aorta to assess large-vessel vasculitis from patient FDG-PET/CT image data. The application shows promising results, as we demonstrated widespread inflammation throughout the aorta in a patient before treatment. After treatment, we observed a significant reduction in inflammation while accurately identifying the aorta regions where inflammation persisted. These findings also align with those of experienced medical doctors who have worked on the same cases.2025-11-14T13:42:08Z36 pages, 13 figuresKonan A. AllalyJozef UrbanKarol Mikulahttp://arxiv.org/abs/2511.11129v1Impact of Brain Anisotropy on Transcranial Temporal Interference Stimulation: Numerical Analysis Toward Reliable Montage Optimization2025-11-14T10:02:23ZBackground & Aim: Transcranial temporal interference stimulation (TIS) is a novel transcranial electrical stimulation modality that enables focused targeting of deep brain structures. When targeting deep regions, current pathways traverse the highly anisotropic white matter, making anisotropy a potentially critical factor. This study aimed to clarify how anisotropy influences interferential currents in deep brain regions and to assess its impact on TIS montage optimization for the first time. Methods: Anatomical head conductor models with anisotropic and isotropic conductivities were compared to evaluate the role of anisotropy in the intracranial interferential currents distributions and montage optimization. For the anisotropic conductivity, conductivity tensors were derived from diffusion-weighted imaging data for gray matter, white matter, and deep brain structures. Montage optimization was conducted based on Pareto front optimization. Results: In literature-reported TIS montages, anisotropic conductivity significantly altered the interferential electric field intensity, with differences of up to 18% in the white matter, whereas discrepancies in deep brain structures remained below 12%. For TIS-optimized montages, these variations across conductivity models yielded only 50% montage disagreement. However, when constraining differences in focality and target field strength to within 10%, the agreement improved to nearly 90%. Conclusions: Incorporating anisotropic conductivities is important to determine individualized focality and target-field characteristics. Moreover, anisotropy can substantially affect the selection of the optimal montage, but under practical focality and target-field tolerances, montage choices largely converge.2025-11-14T10:02:23Z20 pages, 6 figuresKanata YatsudaMasaki FukunagaWenwei YuJose Gomez-Tameshttp://arxiv.org/abs/2511.11128v1Effects of diode laser photobiomodulation on peri-implant inflammation and stability in orthodontic mini-implants: A randomized controlled trial2025-11-14T10:01:18ZPeri-implant inflammation in orthodontic mini-implant may lead to patient discomfort and treatment failure. This study aims to evaluate the effects of diode laser application on the health of mini-implant, preventing peri-implantitis and promoting healing. A randomized controlled trial was conducted involving 30 orthodontic patients (12 males and 18 females, aged 18-32) who had mini-implants implanted on both sides of the maxilla for anterior teeth retraction. One side of each patient was assigned to either an experimental group receiving diode laser irradiation (650 nm, 25 mW) at specific postoperative intervals or a control group receiving simulated radiation. Clinical assessments included plaque index, modified sulcus bleeding index, probing depth, and incidence of peri-implant mucositis and implant mobility, measured at 1, 4, and 12 weeks post-implantation. Additionally, interleukin-1 beta (IL-1\b{eta}) levels in peri-implant fluid were analyzed via enzyme-linked immunosorbent assay (ELISA). Results indicated that the experimental group exhibited significantly lower plaque indices, sulcus bleeding indices, and probing depths (p < 0.05) compared to the control group. Moreover, the experimental group had fewer cases of peri-implant mucositis (p < 0.05), while differences in implant stability were not statistically significant (p > 0.05). IL-1\b{eta} levels were consistently lower in the experimental group throughout the study duration (p < 0.05). In conclusion, adjunctive diode laser therapy appears to enhance peri-implant health and reduce complications associated with orthodontic mini-implants, suggesting a promising direction for improving patient outcomes in orthodontics. Future research should explore long-term effects and the mechanisms underlying these benefits.2025-11-14T10:01:18ZJun LiuLinlin LiXiaofei SunQiang Zhanghttp://arxiv.org/abs/2506.21029v2Are Ultrathin Stents Optimal for Bifurcation Lesions? Insights from Computational Modelling of Provisional and DK-Crush Techniques2025-11-14T00:06:31ZComplex coronary bifurcation lesions remain challenging in percutaneous coronary intervention, with stent design and deployment strategy influencing clinical outcomes. This study compares the mechanical and hemodynamic performance of the ultrathin-strut Orsiro and thin-strut Xience Sierra stent in Provisional Side Branch (PSB) and Double Kissing Crush (DKC) techniques. We used finite element analyses of bifurcation stent deployment to assess malapposition, ostium clearance, and arterial wall stress for both techniques. Computational fluid dynamics simulations quantified the luminal exposure to low Time-Averaged Endothelial Shear Stress (TAESS below 0.4 Pa) and high shear rates (above 1000 1/s). In PSB, Orsiro showed higher malapposition (13.0% vs 9.6%) but improved SB ostium clearance (77% vs 64%) and lower low-TAESS exposure (30.3% vs 33.6%) compared to Xience. Orsiro also produced higher arterial wall stresses, particularly during kissing balloon inflation. In DKC, differences in malapposition and ostium clearance diminished between stents, though Orsiro retained a hemodynamic advantage with lower low-TAESS (28.2% vs 36.3%).Stent design influenced outcomes more strongly in PSB, where anatomical interaction and platform-specific behavior impacted both structural and hemodynamic results. In DKC, procedural complexity minimized those differences, making the stenting technique the primary performance driver. Nonetheless, Orsiro consistently preserved more favorable flow conditions. These findings highlight the need to match device selection with lesion characteristics in PSB, while in DKC, optimizing procedural steps may have a greater impact than the choice of stent platform.2025-06-26T06:09:57ZPublished online in Catheterization and Cardiovascular Interventions (2025), DOI: 10.1002/ccd.70329Andrea ColomboDario CarbonaroMingzi ZhangChi ShenRamtin GharleghiAnkush KapoorClaudio ChiastraNigel JepsonMark WebsterSusann Beier10.1002/ccd.70329http://arxiv.org/abs/2410.08990v2Cyclic jetting enables microbubble-mediated drug delivery2025-11-13T22:27:14ZThe pursuit of targeted therapies capable of overcoming biological barriers, including the tenacious blood-brain barrier, has spurred the investigation into stimuli-responsive microagents. This approach could improve therapeutic efficacy, reduce undesirable side effects, and open avenues for treating previously incurable diseases. Intravenously-administered ultrasound-responsive microbubbles are one of the most promising agents, having demonstrated potential in several clinical trials. However, the mechanism by which microbubbles enhance drug absorption remains unclear. Here, we reveal through unprecedented time-resolved side-view visualisations that single microbubbles, upon microsecond-long ultrasound driving, puncture the cell membrane and induce drug uptake via stable cyclic microjets. Our theoretical models successfully reproduce the observed bubble and cell dynamic responses. We find that cyclic jets arise from shape instabilities, warranting recognition as a novel class of jets in bubbles, distinct from classical inertial jets driven by pressure gradients. We also establish a threshold for bubble radial expansion beyond which microjets form and facilitate cellular permeation. Remarkably, these microjets occur at ultrasound pressures below 100kPa due to their unique formation mechanism. We show that the stress generated by microjetting surpasses all previously suggested mechanisms by at least an order of magnitude. In summary, this work elucidates the physics behind microbubble-mediated targeted drug delivery and provides criteria for its effective yet safe application.2024-10-11T17:02:30ZPublished in Nature PhysicsNat. Phys. 21 (2025) 590-598Marco CattaneoGiulia GuerrieroGazendra ShakyaLisa A. KrattigerLorenza G. PaganellaMaria L. NarcisoOuti Supponen10.1038/s41567-025-02785-0http://arxiv.org/abs/2506.03812v2Impact of friction force and retrieval speed on in silico mechanical thrombectomies: a sensitivity analysis2025-11-13T11:53:10ZBackground: Mechanical Thrombectomy (MT) is a widely accepted first-line treatment for Acute Ischemic Stroke (AIS) and it has been studied using in vitro and in silico models. Thrombectomy outcomes have been performed for patient-specific cases using in silico models. However, until now, in vivo friction coefficients for stent-vessel, stent-clot, and clot-vessel interactions are unknown, but in vitro experiments have been attempted with significant standard deviations. These interactions and friction coefficients have been considered an important aspect of thrombectomy success. Objectives: In the current study, we explored the influence of variation in friction forces for stent-vessel, stent-clot, and clot-vessel interactions using virtual mechanical thrombectomy (VMT). We have performed three simulations for each interaction and varied friction coefficients around the standard deviation observed in the past in vitro studies. Results: (i) clot-vessel friction: higher friction leads to clot fragmentation and VMT failure. (ii) stent-clot friction: it is susceptible to VMT outcomes, with lower values showing the slippage of the clot while higher values lead to fragmentation. (iii) stent-vessel friction: higher friction shows compression of the stent in curved vessels and dislodgment of clot from stent retriever (SR) due to its compression, which leads to VMT failure. (iv) retrieval speed (RS): higher RS (>30 mm/s) leads to significant stent compression and unrealistic behavior of the SR. Conclusions: Analysis of results proposes the necessity for calculating accurate friction factor values and their implementation into in silico models, due to their sensitivity towards thrombectomy outcomes. Such in silico models mimic in vivo thrombectomy more closely and can be used in mechanical thrombectomy planning, management, and decision-making.2025-06-04T10:34:03ZComputer Methods and Programs in Biomedicine 271 (2025) 109018Mahesh S. NagargojeVirginia FregonaGiulia LuraghiFrancesco MigliavaccaDemitria A PoulosBryan C GoodJose Felix Rodriguez Matas10.1016/j.cmpb.2025.109018http://arxiv.org/abs/2511.10126v1Using an instrumented hammer during Summers osteotomy: an animal model2025-11-13T09:33:27ZSummers osteotomy is a technique used to increase bone height and to improve bone density in dental implant surgery. The two main risks of this surgery, which is done by impacting an osteotome in bone tissue, are i) to perforate the sinus membrane and ii) the occurrence of benign paroxysmal vertigo, which are both related to excessive impacts during the osteotomy. Therefore, impacts must be carefully modulated. The aim of this study is to determine whether an instrumented hammer can predict bone damage before the total osteotome protrusion. 35 osteotomies were performed in 9 lamb palate samples using a hammer instrumented with a force sensor to record the variation of the force as a function of time s(t). A signal processing was developed to determine the parameter $τ$ corresponding to the time between the first two peaks of s(t). A camera was used to determine the impact number for damage: NVideo. The surgeon determined when damage occurred, leading to NSurg. An algorithm was developed to detect bone damage based on the variation of $τ$ as a function of the impact number, leading to Ncrit. The algorithm was always able to detect bone damage before total protrusion of the osteotome. We obtained NVideo -NCrit > -2 (respectively NSurg -NCrit > -2) for 97 % (respectively 94 %) of the cases, which indicates the algorithm was almost always able to detect bone damage at most one impact after the video (respectively the surgeon). Our results pave the way to safer Summers osteotomy.2025-11-13T09:33:27ZHomma, Y, Bas-dit-Nugues, M, Dubory, A, Flouzat-Lachaniette, CH, Meningaud, JP, Hersant, B, Gouet, E and Haiat G "Using an instrumented hammer during Summers osteotomy: an animal model'' in press to Med Eng PhysYasuhiro HommaMSMEManon Bas Dit NuguesMSMEArnaud DuboryMSMECharles-Henri Flouzat-LachanietteMSMEJean- Paul MeningaudMSMEBarbara HersantMSMEEmmanuel GouetMSMEGuillaume HaïatMSMEhttp://arxiv.org/abs/2511.10121v1An Instrumented Hammer to Detect the Bone Transitions During an High Tibial Osteotomy: An Animal Study2025-11-13T09:30:45ZHigh tibial osteotomy is a common procedure for knee osteoarthritis during which the surgeon partially opens the tibia and must stop impacting when cortical bone is reached by the osteotome. Surgeons rely on their proprioception and fluoroscopy to conduct the surgery. Our group has developed an instrumented hammer to assess the mechanical properties of the material surrounding the osteotome tip. The aim of this ex vivo study is to determine whether this hammer can be used to detect the transition from cortical to trabecular bone and vice versa. Osteotomies were performed until rupture in pig tibia using the instrumented hammer. An algorithm was developed to detect both transitions based on the relative variation of an indicator derived from the time variation of the force. The detection by the algorithm of both transitions was compared with the position of the osteotome measured with a video camera and with surgeon proprioception. The difference between the detection of the video and the algorithm (respectively, the video and the surgeon; the surgeon and the algorithm) is 1.0$\pm$1.5 impacts (respectively, 0.5$\pm$0.6 impacts; 1.4$\pm$1.8 impacts), for the detection of the transition from the cortical to trabecular bone. For the transition from the trabecular to cortical bone, the difference is 3.6$\pm$2.6 impacts (respectively, 3.9$\pm$2.4 impacts; 0.8$\pm$0.9 impacts), and the detection by the algorithm was always done before the sample rupture. This ex vivo study demonstrates that this method could prevent impacts leading to hinge rupture.2025-11-13T09:30:45ZJournal of Biomechanical Engineering, 2025, 147 (6)Bas-Dit-Nugues ManonMSMETeddy KetaniMSMEClaire BastardMSMEGiuseppe RosiMSMEHugues Albini LomaniMSMECharles-Henri Flouzat-LachanietteMSMEArnaud DuboryMSMEGuillaume HaïatMSMEhttp://arxiv.org/abs/2511.10116v1Lanthanides-Based Nanoparticles Conjugated with Rose Bengal for FRET-Mediated X-Ray-Induced PDT2025-11-13T09:20:38ZIn order to find a good candidate for F{ö}rster Resonance Energy Transfer (FRET)-mediated X-ray-induced photodynamic therapy (X-PDT) for the treatment of cancer, lanthanide (Ln)-based AGuIX nanoparticles (NPs) conjugated with Rose Bengal (RB) as a photosensitizer (PS) were synthesized. X-PDT overcomes the problem of the poor penetration of visible light into tissues, which limits the efficacy of PDT in the treatment of deep-seated tumors. It is essential to optimize FRET efficiency by maximizing the overlap integral between donor emission and acceptor absorption and lengthening the duration of the donor emission. In this study, we optimized energy transfer between a scintillator (Sc) as a donor and a PS as an acceptor. Terbium (Tb) and Gadolinium (Gd) as Scs and Rose RB as a PS were chosen. The study of energy transfer between Tb, Gd and RB in solution and chelated on AGuIX NPs proved to be FRET-like. RB was conjugated directly onto AGuIX NPs (i.e., AGuIX Ln@RB), and the use of a spacer arm (i.e., AGuIX Ln@spacer arm-RB) increased FRET efficiency. Singlet oxygen production by these NPs was observed under UV--visible illumination and X-ray irradiation. The in vitro bioassay demonstrated 52% cell death of U-251MG derived from human malignant glioblastoma multiforme at a concentration of 1 $μ$M RB after illumination and irradiation (2 Gy, 320 kV, 10 mA, 3 Gy/min at 47 cm). In addition, the RB-coupled NRP-1-targeting peptide (i.e., K(RB)DKPPR) was conjugated onto AGuIX NPs by a thiol-maleimide click chemistry reaction, and an affinity in the nM range was observed.2025-11-13T09:20:38ZPharmaceuticals, 2025, 18 (5), pp.672Batoul DhainiLRGP, MCEMAJoël DaoukCRANHervé SchohnCRANPhilippe ArnouxLRGPValérie Jouan-HureauxCRANAlbert MoussaronLRGPAgnès HagegeTechSepMathilde AchardLCPMSamir AcherarLCPMTayssir HamiehMCEMACéline FrochotLRGPhttp://arxiv.org/abs/2511.09941v1GPDM: Generation-Prior Diffusion Model for Accelerated Direct Attenuation and Scatter Correction of Whole-body 18F-FDG PET2025-11-13T04:14:11ZAccurate attenuation and scatter corrections are crucial in positron emission tomography (PET) imaging for accurate visual interpretation and quantitative analysis. Traditional methods relying on computed tomography (CT) or magnetic resonance imaging (MRI) have limitations in accuracy, radiation exposure, and applicability. Deep neural networks provide potential approaches to estimating attenuation and scatter-corrected (ASC) PET from non-attenuation and non-scatter-corrected (NASC) PET images based on VAE or CycleGAN. However, the limitations inherent to conventional GAN-based methods, such as unstable training and mode collapse, need further advancements. To address these limitations and achieve more accurate attenuation and scatter corrections, we propose a novel framework for generating high-quality ASC PET images from NASC PET images: Generation-Prior Diffusion Model (GPDM). Our GPDM framework is based on the Denoising Diffusion Probabilistic Model (DDPM), but instead of starting sampling from an entirely different image distribution, it begins from a distribution similar to the target images we aim to generate. This similar distribution is referred to as the Generation-Prior. By leveraging this Generation-Prior, the GPDM framework effectively reduces the number of sampling steps and generates more refined ASC PET images. Our experimental results demonstrate that GPDM outperforms existing methods in generating ASC PET images, achieving superior accuracy while significantly reducing sampling time. These findings highlight the potential of GPDM to address the limitations of conventional methods and establish a new standard for efficient and accurate attenuation and scatter correction in PET imaging.2025-11-13T04:14:11Z25 pages, 10 figuresMin Jeong ChoHyeong Seok ShimSungyu KimJae Sung Leehttp://arxiv.org/abs/2511.09468v1$β^+$ radioactive nuclei created during proton therapy2025-11-12T16:39:26ZDuring proton therapy, the beam flux decreases due to inelastic interactions with nuclei. At the highest energies used in proton therapy around 25\% protons initiate nuclear reactions. This report presents the cross section measurements of proton-induced production of three $β^+$ emitters -- $^{11}$C, $^{13}$N, $^{15}$O -- with half-lives between 2 and 20 minutes, using solid C, BN and SiO$_2$ targets. Stacks of up to 15 targets were irradiated simultaneously with proton beams of kinetic energy below 58 MeV at the AIC-144 cyclotron of the Institute of Nuclear Physics, Polish Academy of Sciences. The measured cross sections follow the excitation function obtained in the previous experiments, with uncertainty of a few percent.2025-11-12T16:39:26ZProceedings for 2nd Symposium on new trends in Nuclear and Medical Physics, 8 pages, 3 figures, accepted for publication in Acta Physics Polonica AACTA PHYSICA POLONICA A 148, S125 (2025)Izabela Skwira-ChalotPrzemysław SekowskiAgata TaranienkoAdam SpyraTomasz MatulewiczJan SwakońJoanna Matulewicz10.12693/APhysPolA.148.S128http://arxiv.org/abs/2511.09366v1Augment to Augment: Diverse Augmentations Enable Competitive Ultra-Low-Field MRI Enhancement2025-11-12T14:27:08ZUltra-low-field (ULF) MRI promises broader accessibility but suffers from low signal-to-noise ratio (SNR), reduced spatial resolution, and contrasts that deviate from high-field standards. Image-to-image translation can map ULF images to a high-field appearance, yet efficacy is limited by scarce paired training data. Working within the ULF-EnC challenge constraints (50 paired 3D volumes; no external data), we study how task-adapted data augmentations impact a standard deep model for ULF image enhancement. We show that strong, diverse augmentations, including auxiliary tasks on high-field data, substantially improve fidelity. Our submission ranked third by brain-masked SSIM on the public validation leaderboard and fourth by the official score on the final test leaderboard. Code is available at https://github.com/fzimmermann89/low-field-enhancement.2025-11-12T14:27:08ZMICCAI 2025 ULF-EnC ChallengeFelix F Zimmermannhttp://arxiv.org/abs/2511.09293v1Evaluating the Impact of Partial Volume Correction on FDG PET Radiomics Reproducibility in Lymphoma Lesions2025-11-12T13:01:57ZTo evaluate how partial volume correction (PVC) affects the reproducibility of 18F-FDG PET radiomic features in lymphoma lesions, with respect to lesion volume and tissue type. This single-center retrospective study included 131 newly diagnosed lymphoma patients who underwent baseline 18F-FDG PET/CT. In total, 1,603 lesions (1,302 lymph nodes, 117 spleen/liver, 150 bone, and 34 bone/soft-tissue) were semi-automatically segmented and grouped by volume (<3, 3-10, 10-30, >30 mL) and tissue type. 93 radiomic features were extracted from non-PVC and PVC images processed with the Richardson-Lucy (RL) and Reblurred Van Cittert (RVC) algorithms following IBSI guidelines. Reproducibility was quantified using the coefficient of variation (CoV) and the intraclass correlation coefficient (ICC2, absolute agreement), with statistical comparisons performed via Mann-Whitney U tests and false-discovery-rate (FDR) correction. PVC significantly improved feature reproducibility, particularly for large lesions (>30 mL), with median ICC2>0.90 across most feature categories. Small lesions (<3 mL) showed lower stability (ICC2=0.84-0.94) and higher CoV (0.09-0.21). First-Order and GLCM features were the most robust overall (ICC2=0.92-0.99; CoV=0.07-0.11). Bone and spleen lesions exhibited the highest reproducibility (median ICC2 approx 0.95), whereas lymph-node and liver features were more variable. All volume- and tissue-dependent differences remained significant after FDR correction (p<0.05). PVC using RL and RVC markedly enhances FDG-PET radiomic reproducibility in lymphoma, particularly for larger and structurally uniform lesions. Robust features such as First-Order and GLCM can support standardized radiomics workflows and the development of reliable biomarkers for prognosis and personalized therapy. Multicenter validation is warranted to confirm generalizability beyond a single-center setting.2025-11-12T13:01:57ZSetareh HasanabadiMohammad Saber AzimiMehrdad Bakhshayesh KaramHossein Arabihttp://arxiv.org/abs/2511.08974v1An image-guided high-precision research platform for ultra-high dose rate spinal cord toxicity studies2025-11-12T04:38:59ZObjective: While FLASH radiotherapy is recognized for short-term normal tissue sparing, its durability in late-responding organs remains uncertain, limiting clinical adoption. With its clinical importance and steep dose-response, the spinal cord is an ideal model for evaluating FLASH effect on late toxicity. This work introduces a robust image-guided research platform for high-precision irradiation at both CONV and UHDR to enable FLASH late toxicity studies using a rat spinal cord model. Approach: A modified LINAC was employed to irradiate the C1-T2 rat spinal cord with 18 MeV UHDR and CONV beams. A custom rat immobilization device, a portable X-ray imaging system, and an ion-chamber-based UHDR output monitoring system were integrated to ensure accurate C1-T2 localization and precise dose delivery. A Monte Carlo (MC) dose engine was developed to provide accurate dosimetry and support interpretation of in vivo results. Scintillator measurements were performed within the spinal cord to verify MC results and the precision of our platform. Results: We achieved submillimeter C1-T2 setup accuracy and maintained submillimeter intrafraction motion. Ion chamber readings showed linear correlation with UHDR output. MC indicated uniform irradiation along the central ~13 mm cord. Our CONV beam exhibited distribution close to that of the UHDR beam, with difference <3%, isolating dose rate as the only variable. Scintillator-measured dose agreed with MC within 4%, confirming both MC accuracy and the platform's high-precision delivery. Significance: We developed the first comprehensive, image-guided preclinical platform for accurate UHDR and CONV irradiation to investigate FLASH-mitigated spinal cord toxicity in rats. This work thus establishes a robust foundation for systematic evaluation of the FLASH effect in late-responding organs and for determining clinical applicability of FLASH.2025-11-12T04:38:59ZBanghao ZhouLixiang GuoYi-Chun TsaiAlbert van der KogelJohn WongIulian IordachitaKai JiangWeiguo LuPaul MedinKen Kang-Hsin Wang