Predicting Region of Interest in Human Visual Search Based on Statistical Texture and Gabor Features

2026-01-12T21:06:23Z

Understanding human visual search behavior is a fundamental problem in vision science and computer vision, with direct implications for modeling how observers allocate attention in location-unknown search tasks. In this study, we investigate the relationship between Gabor-based features and gray-level co-occurrence matrix (GLCM) based texture features in modeling early-stage visual search behavior. Two feature-combination pipelines are proposed to integrate Gabor and GLCM features for narrowing the region of possible human fixations. The pipelines are evaluated using simulated digital breast tomosynthesis images. Results show qualitative agreement among fixation candidates predicted by the proposed pipelines and a threshold-based model observer. A strong correlation is observed between GLCM mean and Gabor feature responses, indicating that these features encode related image information despite their different formulations. Eye-tracking data from human observers further suggest consistency between predicted fixation regions and early-stage gaze behavior. These findings highlight the value of combining structural and texture-based features for modeling visual search and support the development of perceptually informed observer models.

Application of Ideal Observer for Thresholded Data in Search Task

2026-01-12T20:18:02Z

This study advances task-based image quality assessment by developing an anthropomorphic thresholded visual-search model observer. The model is an ideal observer for thresholded data inspired by the human visual system, allowing selective processing of high-salience features to improve discrimination performance. By filtering out irrelevant variability, the model enhances diagnostic accuracy and computational efficiency. The observer employs a two-stage framework: candidate selection and decision-making. Using thresholded data during candidate selection refines regions of interest, while stage-specific feature processing optimizes performance. Simulations were conducted to evaluate the effects of thresholding on feature maps, candidate localization, and multi-feature scenarios. Results demonstrate that thresholding improves observer performance by excluding low-salience features, particularly in noisy environments. Intermediate thresholds often outperform no thresholding, indicating that retaining only relevant features is more effective than keeping all features. Additionally, the model demonstrates effective training with fewer images while maintaining alignment with human performance. These findings suggest that the proposed novel framework can predict human visual search performance in clinically realistic tasks and provide solutions for model observer training with limited resources. Our novel approach has applications in other areas where human visual search and detection tasks are modeled such as in computer vision, machine learning, defense and security image analysis.

A density functional theory study of amino acids on Mg and Mg-based alloys

2026-01-12T16:09:36Z

Magnesium (Mg) has mechanical properties similar to bone tissue, and Mg ions take part in the metabolism. This makes Mg of interest for biocompatible degradable body implants, provided that its high corrosion rate can be inhibited. Slightly alloying Mg and adding surface coatings can slow down the corrosion processes without significantly changing the mechanical properties. Use of coating molecules that are native to the body increase the likelihood of making the surface biocompatible, for example by use of amino acids. We here present a density functional theory (DFT) study of the adsorption on Mg(0001) of the amino acids glycine, L-proline, and L-hydroxyproline (Hyp), the main amino acid content of collagen. We investigate how binding of the functional groups of Hyp are affected when Mg(0001) is slightly alloyed with zinc, lithium or aluminium, and we also model the immersion of the systems in a water environment to see how this affects the binding.

Overcoming the limitations of NMR Field Probes: A Novel Integrated Sensor Utilizing Pre-Polarization for (Ultra) Low Field MRI

2026-01-12T12:05:44Z

Access to magnetic resonance imaging (MRI) remains severely limited in low- and middle-income countries, especially in sub-Saharan Africa, despite rising rates of non-communicable diseases. Low-field MRI presents an affordable, locally developable diagnostic solution, but its performance is constrained by magnetic field instability. We present a novel NMR field probe designed to overcome these challenges using a rapid non-adiabatic switch-off of a pre-polarization field resulting in precessing spin magnetization. Achieved by first use of high-voltage silicon carbide transistors operating in controlled avalanche breakdown, it measures the Larmor frequency without prior field knowledge, unlike conventional probes. This capability is crucial during magnet development with often unknown fields, allowing early detection of magnet issues, and offering an urgently needed tool for magnet design and image-quality improvement. Validated from 1 mT to 45 mT (up to 1,000 times stronger than similar systems) its low-cost, modular design supports replication, upgrades, and enhanced field control, helping expand global MRI access.

A Pilot Kinematic Study on the Forehand Reverse Flick: Feasibility of a Novel Short Return Technique in Table Tennis

2026-01-12T09:38:21Z

Background Following changes in table tennis ball materials, offensive returns have become more important for initiating sustained topspin offense. However, using the backhand flick (BF) to return forehand short balls often increases the difficulty of recovery and continuity, revealing a technical gap. This study preliminarily verified a novel forehand short return technique, the forehand reverse flick (FRF), and analyzed its similarities and differences with the BF. Methods Four elite athletes completed seven consecutive days of FRF specific training. Infrared motion capture and ultra-high-speed cameras were used to collect data on racket kinematics, movement duration, and ball performance. Results The success rate of the FRF increased steadily, reaching 86%. Racket trajectories of the two techniques were highly similar along the X (r = 1) and Y (r = 0.99) axes but differed along the Z (r = -0.04) axis. Racket and ball velocities were comparable between techniques, whereas the FRF showed lower resultant acceleration (approximately 265.57 m/s) and required about 0.03 s more for movement duration. Ball velocity was comparable between techniques, for the ball spin, the FRF generated lower spin (approximately 76.61 r/s) about 64% of the BF value (approximately 120.13 r/s). The highest participant mean spin rate reached 93 r/s, about 77% of the BF mean. Conclusion Overall, the FRF was found to have favorable learnability and training value, with potential for further optimization and competitive application.

On optimization of Paganin's method for propagation-based X-ray phase-contrast imaging and tomography

2026-01-12T05:43:28Z

Paganin's method for image reconstruction in propagation-based phase-contrast X-ray imaging and tomography has enjoyed broad acceptance in recent years, with over one thousand publications citing its use. The present paper discusses approaches to optimization of the method with respect to simple image quality metrics, such as signal-to-noise ratio and spatial resolution, as well as a reference-based metric corresponding to the relative mean squared difference between the reconstructed image and the "ground truth" image that would be obtained in a setup with perfect spatial resolution and no noise. The problem of optimization of the intrinsic regularization parameter of Paganin's method with respect to spatial resolution in the reconstructed image is studied in detail. It is also demonstrated that a combination of Paganin's method with a Tikhonov-regularized deconvolution of the point-spread function of the imaging system can provide significantly higher image quality compared to the standard version of the method. Analytical expressions for some relevant image quality metrics are obtained and compared with results of numerical simulations. Advantages and shortcomings of optimization approaches using a number of different image quality metrics are discussed. The results of this study are expected to be useful in practical X-ray imaging and training of deep machine learning models for image denoising and segmentation.

Critical Shortfall in NIH Support for Medical Physics Research

2026-01-12T04:21:49Z

This report summarizes changes in federal research funding to the medical physics community between FY24 and FY25. By linking the AAPM membership database with NIH RePORTER records, we quantified the distribution of NIH funding for projects led by AAPM researchers. Although total NIH funding to AAPM members remained relatively stable across the two years, the composition of that funding shifted substantially. Competing (new and renewal) awards declined 50%, driven largely by an 80% collapse in new R01 grants from the National Cancer Institute (NCI). In contrast, noncompeting continuation awards increased by 10%, following a shift in how NIH funds multi-year projects. These changes occurred in the context of widespread disruptions to NIH review and grantmaking, including delayed study sections and more stringent administrative requirements. Federal funding is essential to sustaining innovation, supporting early-stage investigators, and ensuring that patients receive the best possible care. The trends identified here raise concerns about the long-term vitality and stability of the medical physics research pipeline.

A primer on treatment planning aspects for temporally modulated pulsed radiation therapy

2026-01-11T22:16:46Z

Temporally modulated pulsed radiotherapy (TMPRT) delivers conventional fraction doses of radiation using temporally separated pulses of low doses (<30 cGy) yielding fraction-effective dose rates of around 6.7 cGy/min with the goal to exploit tumor radiation hypersensitivity, which was observed in both, preclinical models and in human clinical trials. To facilitate TMPRT, volumetric modulated arc therapy (VMAT) and 3D-CRT planning techniques were developed following the guidelines of the proposed NRG CC-017 trial. Plans were evaluated with respect to homogeneity, conformality, and adherence to dose constraints. Deliverability of plans was assessed using in-phantom measurements for absorbed dose accuracy at low dose rates and using EPID for isodose verification. For VMAT only single arc plans were found to be acceptable due to otherwise unacceptably heterogeneous field doses, while for dynamic conformal arcs machine limtations on the number of monitor units per degree require the use of partial arcs for each pulse. Delivery of plans at low dose rates (< 100 MU/min) was accurate with high Gamma pass rates on modern LINACs and moderate pass rates on legacy LINACs, in line with their general performance. Generally, VMAT is preferred to achieve optimal homogeneity, conformality, and organ-at-risk sparing, while the use of 3D-CRT can increase the availability of TMPRT for more patients and clinics.

Angled Aortic Cannulation Reduces Cerebral Embolic Transport and Adverse Wall Loading During Cardiopulmonary Bypass: A Patient-Specific Hemodynamic Study

2026-01-11T20:12:36Z

Embolic stroke during cardiopulmonary bypass (CPB) is strongly influenced by cannula induced flow disturbances that govern emboli transport and aortic wall loading. This study quantifies how aortic cannula orientation affects embolic distribution and atherosclerotic plaque disruption risk across patient specific, age-dependent aortic anatomies under clinical CPB conditions. A validated computational fluid dynamics and Lagrangian particle tracking (CFD-LPT) framework was applied to four patient-specific aortic models representing pediatric, adolescent, adult, and geriatric anatomies. Two clinically relevant cannula orientations: perpendicular (90 deg) and angled (30 deg), were evaluated under varying blood viscosities (1.5 to 3.5 cP) and embolus sizes (0.5 to 2.5 mm). Aortic branch exit percentage, wall pressure, and wall shear stress (WSS) were quantified. The 30 deg angled cannula reduced embolic transport into the aortic branches by 18 to 50 percent compared with perpendicular cannulation, with the largest reduction observed in the geriatric model. Perpendicular cannulation produced concentrated jet impingement, resulting in significantly elevated posterior wall pressure (24 percent) and up to an 8 fold increase in local WSS. The pediatric anatomy exhibited the highest sensitivity, where decreasing viscosity and increasing embolus size increased branch exit by 8.4 percent and 25 to 44 percent, respectively, consistent with higher particle Stokes numbers and inertial decoupling from the core flow. Angled cannulation redistributes jet momentum along the aortic curvature, weakens jet impingement, reduces localized pressure and wall stress, and limits embolic delivery towards the cerebral circulation. These findings provide mechanistic, patient-specific evidence supporting angled cannula orientation to reduce CPB complications.

Volumetric ultrasound imaging with a sparse matrix array and integrated fiber-optic sensing for robust needle tracking in interventional procedures

2026-01-10T10:06:07Z

Accurate visualization of interventional devices, such as medical needles, is essential for the safe and effective guidance of minimally invasive procedures. Ultrasound (US) imaging is widely used for needle guidance, but the two-dimensional nature of most clinical probes limits accurate three-dimensional (3D) localization, particularly of the needle tip. We present a novel system that integrates volumetric US imaging with 3D needle tracking by combining a fiber-optic hydrophone embedded in the needle and a sparse spiral US array. Real-time volumetric imaging was achieved using plane-wave techniques, while precise needle tip tracking was enabled through communication between the probe and hydrophone. The feasibility of the approach was demonstrated using a nerve block training phantom. This proof-of-concept system enables simultaneous volumetric anatomical imaging and 3D needle tip tracking, with strong potential to enhance the efficacy and safety of image-guided interventional procedures.

Group-kernel auto-calibration and group-patch k-space reconstruction: Fast MRI with time-variant B0 kernels partitioned into time-invariant subsets

2026-01-09T01:53:31Z

Purpose: Pushing MRI speed further demands more spatially-encoded information captured per unit time, e.g., by superimposing additional field modulations during oversampled readout. However, this can introduce calibration errors and increase reconstruction time. Thus, we propose a continuous field calibration approach and an efficient k-space reconstruction technique. Theory and Methods: Our auto-calibration generalizes GRAPPA kernels to explicitly extract continuous B0 modulation kernels, solving interpolation relationships between two ACS regions differing only in the extra field modulation. The k-space locations sharing the same instantaneous image-space modulation are grouped, so that subsets of time-invariant kernels can be separately estimated, as a generalized solution for Wave-CAIPI/FRONSAC-type scans. This view further inspires a k-space subregion-wise reconstruction technique, as an efficient alternative to conventional hybrid-space reconstruction. At 9.4T, FLASH accelerated by a local B0 coil array and Wave-CAIPI were tested with retrospective undersampling. Results: Artifact-free images were reconstructed, under diverse rapid B0 modulation schemes, reaching maximum acceleration factors of 8-fold in 2D and 14.6-fold in 3D. Some nonlinear gradients modulation schemes reach similar sampling efficiency as linear gradients modulation. The proposed reconstruction shows potentials in reducing reconstruction time. Conclusion: Rapid B0 modulations and widely-adopted parallel imaging can share a common mathematical framework, and consequently, achieve similarly-robust reconstructions. Specifically, for scans using dynamic B0 and static RF kernels, not only signal encoding, but also auto-calibration and reconstruction can be performed in k-space. This paves the way to robustly remove eddy currents, and explore more complex B0 modulation strategies towards ultimate MRI speed.

All-optical photoacoustic tomography via beam deflection

2026-01-09T00:29:48Z

Photoacoustic imaging (PAI) uniquely combines the advantages of optical contrast with deep tissue penetration capability of acoustic waves, enabling imaging at depths of several centimeters. Conventional photoacoustic imaging methods have relied on pulsed lasers to induce the photoacoustic effect, coupled with arrays of pressure transducers to detect the resulting ultrasound signals. In this work, we propose an alternative all-optical approach that leverages optical deflection to record photoacoustic waves by an array of detection beams. The measured signal is shown to be the Radon transform of the pressure gradients. An optimization-based inversion procedure is used to reconstruct the initial time pressure gradient field. Subsequently, a Galerkin method is used to reconstruct the pressure field from the pressure gradient field. The new modality offers the potential for enhanced sensitivity and reduced signal distortion, advancing the capabilities of photoacoustic imaging beyond traditional transducer-based systems.

Group-patch joint compression for highly accelerated MRI: compressing dynamic B0 and static RF spatial modulations across k-space subregion groups

2026-01-08T22:36:58Z

Purpose: To accelerate MRI further, rapid B0 field modulations can be applied during oversampled readout to capture additional physical information, e.g., Wave-CAIPI, FRONSAC, local B0 coils modulations. These methods, however, introduce additional non-Fourier-encoded dimension that cannot be resolved by FFT, posing significant reconstruction challenges particularly in compressed-sensing or neural-network frameworks. Theory and methods: Because B0 modulations vary slowly relative to the oversampled ADC dwell time, we exploit this encoding redundancy by compressing k-space patch-by-patch across subregions, each of which is jointly encoded by a distinct subset of B0 and RF (receive) spatial encoding functions. For each patch, a compression matrix is computed once and reused to compress all patches encoded by the same B0/RF spatial modulations. This can be implemented by feeding subsets of B0 and RF spatial encoding maps into an adapted conventional RF array compression algorithm, mimicking an expanded set of virtual receiver channels. This approach was evaluated on ex-vivo/in-vivo human brain scans at 9.4T/3T. Results: The proposed group-patch joint compression achieves substantially higher compression factors than conventional RF-only compression, while minimally compromising encoding efficiency. Typically, joint compression factors of 11x-20x led to negligible encoding loss, dramatically reducing reconstruction time and peak memory usage. For example, compressed-sensing reconstruction took 1.4-5.1s/2D slice, 177s-10.1min/3D volume, on a high-memory CPU node. Conclusion: Given joint encoding of dynamic B0 and static RF fields, compressing multidimensional k-space patches in separate groups outperforms compressing RF receiver channels alone. This substantially mitigates a fundamental computational bottleneck that arises when combining rapid B0 and RF-receiver modulations.

Effect of Right Ventricular Outflow Tract Material Properties on Simulated Transcatheter Pulmonary Placement

2026-01-08T22:19:20Z

Finite element (FE) simulations emulating transcatheter pulmonary valve (TPV) system deployment in patient-specific right ventricular outflow tracts (RVOT) assume material properties for the RVOT and adjacent tissues. Sensitivity of the deployment to variation in RVOT material properties is unknown. Moreover, the effect of a transannular patch stiffness and location on simulated TPV deployment has not been explored. A sensitivity analysis on the material properties of a patient-specific RVOT during TPV deployment, modeled as an uncoupled HGO material, was conducted using FEBioUncertainSCI. Further, the effects of a transannular patch during TPV deployment were analyzed by considering two patch locations and four patch stiffnesses. Visualization of results and quantification were performed using custom metrics implemented in SlicerHeart and FEBio. Sensitivity analysis revealed that the shear modulus of the ground matrix (c), fiber modulus (k1), and fiber mean orientation angle (gamma) had the greatest effect on 95th %ile stress, whereas only c had the greatest effect on 95th %ile Lagrangian strain. First-order sensitivity indices contributed the greatest to the total-order sensitivity indices. Simulations using a transannular patch revealed that peak stress and strain were dependent on patch location. As stiffness of the patch increased, greater stress was observed at the interface connecting the patch to the RVOT, and stress in the patch itself increased while strain decreased. The total enclosed volume by the TPV device remained unchanged across all simulated patch cases. This study highlights that while uncertainties in tissue material properties and patch locations may influence functional outcomes, FE simulations provide a reliable framework for evaluating these outcomes in TPVR.

Feasibility of a General-Purpose Deep Learning Dose Engine: A Multi-Site Validation Study

2026-01-08T19:55:33Z

Conventional radiotherapy dose calculation algorithms are often computationally slow and non-differentiable, creating bottlenecks for online adaptive radiotherapy (ART) and limiting end-to-end automatic planning. Deep learning provides consistent inference performance and a differentiable framework essential for rapid optimization. In this study, we developed a generalized, site-independent deep learning dose engine using a beamlet-based input strategy. This establishes a computationally consistent and differentiable module that enables end-to-end training for autoplanning while maintaining accuracy across diverse geometries. A dataset of 3,600 plans from 120 patients across six anatomical sites was used to train two 3D convolutional neural networks, a standard U-Net and a Cascade U-Net, to predict 3D dose distributions from CT images and divergent MLC/jaw projections. Performance was validated via 3D gamma analysis on an independent cohort of 60 VMAT plans. The optimal model (U-Net with MAE loss) achieved a mean gamma passing rate of $98.9 \pm 1.6\%$ (3%/2mm, 10% threshold). Performance remained robust across all sites (passing rates $>98\%$), demonstrating that the beamlet-based strategy generalizes effectively to complex geometries without site-specific training. These results indicate that a single, site-independent model can calculate radiotherapy dose distributions with clinical accuracy. This differentiable engine is highly suitable for integration into end-to-end automatic planning, online ART, and secondary dose verification workflows.