In Vivo Quantification of Arterial Active Mechanics Using Deep Learning-Assisted Pressure-Area Analysis

2026-01-19T00:26:48Z

Active arterial mechanics, governed by vascular smooth muscle contraction, are critical to physiological regulation, cardiovascular disease progression, and clinical diagnosis. Although various in vivo methods have been developed to assess arterial stiffness, most cannot distinguish the contribution of smooth muscle tone; therefore, quantitative characterization of arterial activity remains challenging. In this study, we developed a pressure-area analysis framework integrating ultrasound imaging, blood pressure measurement, neural network-based segmentation of arterial cross-sectional area, and biomechanical model-driven inversion to infer active mechanical properties. A total of 233 volunteers (aged 18-65 year) were recruited to acquire cross-sectional ultrasound videos of the right common carotid artery for training the neural network. The segmentation results demonstrate good spatial and temporal performance of the neural network. We further recruited 10 additional volunteers (aged 25 +/- 3 year) to perform a 1-minute step test, followed by pressure-area measurements over a 30-minute recovery period. Using the proposed approach, we quantified post-exercise changes in carotid arterial active mechanics relative to baseline (i.e., the resting state). Results showed that active mechanics remained elevated for approximately 15 minutes compared to baseline (p < 0.05), whereas systolic pressure differed significantly only within the first approximately 5 minutes post-exercise (p < 0.001). These results indicate a dissociation between blood pressure and smooth muscle recovery, which may offer new insight into vascular smooth muscle regulation during physiological stress.

Wavefront Shaping of Ultrasound Vortex through the Human Skull Enabled by Binary Acoustic Metasurfaces

2026-01-18T14:49:19Z

Ultrasound vortices have rapidly expanded their applications to areas like particle trapping, contactless manipulation, acoustic communications. In ultrasonic imaging and therapy involving bone tissues, these vortex beams offer intriguing possibilities but transmitting them through bone (especially the skull) poses challenges. Traditional acoustic lenses were engineered to rectify skull-induced beam aberration, and their capacity was limited to generating only static ultrasound fields within the brain. To overcome this constraint, our study presents a novel method for transcranially steering focused ultrasound vortex using 3D printed binary acoustic metasurfaces (BAMs) with a thickness of 0.8 λ. We tackled the challenge of skull-induced phase aberration by computing the phase distribution via a time reversal technique, which concurrently enabled the generation of a steerable focused vortex inside an ex vivo human skull by adjusting the operating frequency. Both numerical and simulations experiments were conducted to validate the capabilities of BAMs. Furthermore, we explored the generation of higher-order topological charge acoustic vortices within the brain utilizing the BAM. This development paves the way for designing cost-effective particle-trapping systems, facilitating clot manipulation, and applying acoustic-radiation forces and torques within or across bone structures, thus presenting a new frontier for potential biomedical applications.

Dose-LET Interactions Predict Capsular Contracture After Proton Postmastectomy Radiation Therapy

2026-01-16T19:27:23Z

Pencil beam scanning (PBS) proton therapy provides highly conformal dose distributions that are increasingly leveraged for postmastectomy radiation therapy (PMRT) to reduce cardiopulmonary exposure. However, implant-based reconstruction in the setting of PMRT remains vulnerable to capsular contracture, and biological mechanisms of possible high linear energy transfer (LET) in PBS have not been well characterized. A retrospective case-control study was conducted on consecutive breast cancer patients who underwent mastectomy followed by implant-based reconstruction and proton PMRT (50 Gy in 25 fractions) between 2015 and 2021. Dose-LET volume histograms (DLVHs) were calculated for peri-implant tissue (5-mm shell around the implant). Generalized linear mixed-effects regression (GLMER) was employed to identify DLVH indices significantly associated with capsular contracture. Spearman correlation analysis was used to eliminate redundance. DLVCs were derived from receiver operating characteristic (ROC) analysis and validated using support vector machine (SVM)-based normal tissue complication probability (NTCP) model. Eight capsular contracture and 16 matched controls patients were analyzed. Three independent and significant DLVH indices were identified(p<0.01). The corresponding DLVCs were: V(55.8 Gy[RBE=1.1], 2.2 keV/μm) < 0.0033%, V(50.3 Gy[RBE=1.1], 5.4 keV/μm) < 0.0017%, and V(32.8 Gy[RBE=1.1], 0.9 keV/μm) > 96.98%. The SVM-based NTCP model achieved an area under the ROC curve (AUROC) of 0.867, with 91.7% accuracy, 87.5% sensitivity, and 93.8% specificity. Capsular contracture following proton PMRT is significantly associated with the synergistic interplay between dose and LETd in peri-implant tissue. The derived DLVCs provide actionable dosimetric constraints that can be integrated into treatment planning to minimize capsular contracture risk in proton PMRT.

Building Digital Twins of Different Human Organs for Personalized Healthcare

2026-01-16T14:15:06Z

Digital twins are virtual replicas of physical entities and are poised to transform personalized medicine through the real-time simulation and prediction of human physiology. Translating this paradigm from engineering to biomedicine requires overcoming profound challenges, including anatomical variability, multi-scale biological processes, and the integration of multi-physics phenomena. This survey systematically reviews methodologies for building digital twins of human organs, structured around a pipeline decoupled into anatomical twinning (capturing patient-specific geometry and structure) and functional twinning (simulating multi-scale physiology from cellular to organ-level function). We categorize approaches both by organ-specific properties and by technical paradigm, with particular emphasis on multi-scale and multi-physics integration. A key focus is the role of artificial intelligence (AI), especially physics-informed AI, in enhancing model fidelity, scalability, and personalization. Furthermore, we discuss the critical challenges of clinical validation and translational pathways. This study not only charts a roadmap for overcoming current bottlenecks in single-organ twins but also outlines the promising, albeit ambitious, future of interconnected multi-organ digital twins for whole-body precision healthcare.

Data Standards in Audiology: A Mixed-Methods Exploration of Community Perspectives and Implementation Considerations

2026-01-16T10:23:32Z

Objective: This study addresses conceptual issues around data standardisation in audiology, and outlines steps toward achieving it. It reports a survey of the computational audiology community on their current understanding, needs, and preferences concerning data standards. Based on survey findings and a panel discussion, recommendations are made concerning moving forward with standardisation in audiology. Design: Mixed-methods: 1) review of existing standardisation efforts; 2) a survey of the computational audiology community; 3) expert panel discussion in a dedicated session at the 2024 Virtual Conference of Computational Audiology. Sample: Survey: 82 members of the global community; Panel discussion: five experts. Results: A prerequisite for any global audiology database are agreed data standards. Although many are familiar with the general idea, few know of existing initiatives, or have actively participated in them. Ninety percent of respondents expressed willingness to follow or contribute to standardisation efforts. The panel discussed relevant initiatives (e.g. OMOP, openEHR, Noah) and explored both challenges (around harmonisation) and opportunities (alignment with other medical fields and conversion among approaches). Conclusions: Combining conceptual discussion with stakeholder views, the study offers guidance for implementing interoperable data standards in audiology. It highlights community support, key issues to address, and suggests paths for future work.

Generation of Chest CT pulmonary Nodule Images by Latent Diffusion Models using the LIDC-IDRI Dataset

2026-01-16T08:36:12Z

Recently, computer-aided diagnosis systems have been developed to support diagnosis, but their performance depends heavily on the quality and quantity of training data. However, in clinical practice, it is difficult to collect the large amount of CT images for specific cases, such as small cell carcinoma with low epidemiological incidence or benign tumors that are difficult to distinguish from malignant ones. This leads to the challenge of data imbalance. In this study, to address this issue, we proposed a method to automatically generate chest CT nodule images that capture target features using latent diffusion models (LDM) and verified its effectiveness. Using the LIDC-IDRI dataset, we created pairs of nodule images and finding-based text prompts based on physician evaluations. For the image generation models, we used Stable Diffusion version 1.5 (SDv1) and 2.0 (SDv2), which are types of LDM. Each model was fine-tuned using the created dataset. During the generation process, we adjusted the guidance scale (GS), which indicates the fidelity to the input text. Both quantitative and subjective evaluations showed that SDv2 (GS = 5) achieved the best performance in terms of image quality, diversity, and text consistency. In the subjective evaluation, no statistically significant differences were observed between the generated images and real images, confirming that the quality was equivalent to real clinical images. We proposed a method for generating chest CT nodule images based on input text using LDM. Evaluation results demonstrated that the proposed method could generate high-quality images that successfully capture specific medical features.

Visual question answering-based image-finding generation for pulmonary nodules on chest CT from structured annotations

2026-01-16T08:21:26Z

Interpretation of imaging findings based on morphological characteristics is important for diagnosing pulmonary nodules on chest computed tomography (CT) images. In this study, we constructed a visual question answering (VQA) dataset from structured data in an open dataset and investigated an image-finding generation method for chest CT images, with the aim of enabling interactive diagnostic support that presents findings based on questions that reflect physicians' interests rather than fixed descriptions. In this study, chest CT images included in the Lung Image Database Consortium and Image Database Resource Initiative (LIDC-IDRI) datasets were used. Regions of interest surrounding the pulmonary nodules were extracted from these images, and image findings and questions were defined based on morphological characteristics recorded in the database. A dataset comprising pairs of cropped images, corresponding questions, and image findings was constructed, and the VQA model was fine-tuned on it. Language evaluation metrics such as BLEU were used to evaluate the generated image findings. The VQA dataset constructed using the proposed method contained image findings with natural expressions as radiological descriptions. In addition, the generated image findings showed a high CIDEr score of 3.896, and a high agreement with the reference findings was obtained through evaluation based on morphological characteristics. We constructed a VQA dataset for chest CT images using structured information on the morphological characteristics from the LIDC-IDRI dataset. Methods for generating image findings in response to these questions have also been investigated. Based on the generated results and evaluation metric scores, the proposed method was effective as an interactive diagnostic support system that can present image findings according to physicians' interests.

Physiological-model-based neural network for modeling the metabolic-heart rate relationship during physical activities

2026-01-16T01:58:33Z

Heart failure (HF) poses a significant global health challenge, with early detection offering opportunities for improved outcomes. Abnormalities in heart rate (HR), particularly during daily activities, may serve as early indicators of HF risk. However, existing HR monitoring tools for HF detection are limited by their reliability on population-based averages. The estimation of individualized HR serves as a dynamic digital twin, enabling precise tracking of cardiac health biomarkers. Current HR estimation methods, categorized into physiologically-driven and purely data-driven models, struggle with efficiency and interpretability. This study introduces a novel physiological-model-based neural network (PMB-NN) framework for HR estimation based on oxygen uptake (VO2) data during daily physical activities. The framework was trained and tested on individual datasets from 12 participants engaged in activities including resting, cycling, and running. By embedding physiological constraints, which were derived from our proposed simplified human movement physiological model (PM), into the neural network training process, the PMB-NN model adheres to human physiological principles while achieving high estimation accuracy, with a median R$^2$ score of 0.8 and an RMSE of 8.3 bpm. Comparative statistical analysis demonstrates that the PMB-NN achieves performance on par with the benchmark neural network model while significantly outperforming traditional physiological model (p=0.002). In addition, our PMB-NN is adept at identifying personalized parameters of the PM, enabling the PM to generate reasonable HR estimation. The proposed framework with a precise VO2 estimation system derived from body movements enables the future possibilities of personalized and real-time cardiac monitoring during daily life physical activities.

Cross-Modal Fine-Tuning of 3D Convolutional Foundation Models for ADHD Classification with Low-Rank Adaptation

2026-01-15T05:18:46Z

Early diagnosis of attention-deficit/hyperactivity disorder (ADHD) in children plays a crucial role in improving outcomes in education and mental health. Diagnosing ADHD using neuroimaging data, however, remains challenging due to heterogeneous presentations and overlapping symptoms with other conditions. To address this, we propose a novel parameter-efficient transfer learning approach that adapts a large-scale 3D convolutional foundation model, pre-trained on CT images, to an MRI-based ADHD classification task. Our method introduces Low-Rank Adaptation (LoRA) in 3D by factorizing 3D convolutional kernels into 2D low-rank updates, dramatically reducing trainable parameters while achieving superior performance. In a five-fold cross-validated evaluation on a public diffusion MRI database, our 3D LoRA fine-tuning strategy achieved state-of-the-art results, with one model variant reaching 71.9% accuracy and another attaining an AUC of 0.716. Both variants use only 1.64 million trainable parameters (over 113x fewer than a fully fine-tuned foundation model). Our results represent one of the first successful cross-modal (CT-to-MRI) adaptations of a foundation model in neuroimaging, establishing a new benchmark for ADHD classification while greatly improving efficiency.

DeepLight: A Sobolev-trained Image-to-Image Surrogate Model for Light Transport in Tissue

2026-01-14T12:40:02Z

In optoacoustic imaging, recovering the absorption coefficients of tissue by inverting the light transport remains a challenging problem. Improvements in solving this problem can greatly benefit the clinical value of optoacoustic imaging. Existing variational inversion methods require an accurate and differentiable model of this light transport. As neural surrogate models allow fast and differentiable simulations of complex physical processes, they are considered promising candidates to be used in solving such inverse problems. However, there are in general no guarantees that the derivatives of these surrogate models accurately match those of the underlying physical operator. As accurate derivatives are central to solving inverse problems, errors in the model derivative can considerably hinder high fidelity reconstructions. To overcome this limitation, we present a surrogate model for light transport in tissue that uses Sobolev training to improve the accuracy of the model derivatives. Additionally, the form of Sobolev training we used is suitable for high-dimensional models in general. Our results demonstrate that Sobolev training for a light transport surrogate model not only improves derivative accuracy but also reduces generalization error for in-distribution and out-of-distribution samples. These improvements promise to considerably enhance the utility of the surrogate model in downstream tasks, especially in solving inverse problems.

Use of synthetic data for training dose estimation neural networks in CT dosimetry

2026-01-14T07:15:59Z

Personalized computed tomography (CT) dosimetry has great potential in assessing patient-specific radiation exposure, supporting risk assessment, and optimizing clinical protocols. The aim of this study is to evaluate the potential of synthetic anatomical data for improving machine learning-based personalized computed tomography (CT) dosimetry. It is investigated whether the combination of synthetic human body geometries with real patient data can improve model accuracy and generalization for CT organ dose estimation while maintaining the uncertainty requirements outlined in IAEA TRS-457. Deep learning models for organ dose prediction are trained using datasets with varying proportions of real and synthetic data. Synthetic datasets are generated from computational human phantoms with controlled distributions of organ volumes and body. A dedicated model uncertainty evaluation method is implemented to quantify prediction reliability and verify compliance with TRS-457 accuracy limits. Model performance and uncertainty are compared across different training data compositions, including a model trained solely on real patient data. As baseline validated Monte Carlo simulation is used. Models trained solely on synthetic data show limited predictive accuracy, particularly for small or peripheral organs. Incorporating as little as 10 % real patient data significantly improves both statistical accuracy and uncertainty estimates, achieving a performance comparable to that of real-only models. The hybrid training approach improves robustness across different anatomies while maintaining TRS-457-compliant uncertainty levels (k=2 uncertainty < 20% for adults). The results indicate that the combination of real and synthetic data in combination with a systematic uncertainty assessment supports the development of CT dosimetry models and at the same time reduces the amount of real data required.

Changes in Visual Attention Patterns for Detection Tasks due to Dependencies on Signal and Background Spatial Frequencies

2026-01-13T22:12:27Z

We aim to investigate the impact of image and signal properties on visual attention mechanisms during a signal detection task in digital images. The application of insight yielded from this work spans many areas of digital imaging where signal or pattern recognition is involved in complex heterogenous background. We used simulated tomographic breast images as the platform to investigate this question. While radiologists are highly effective at analyzing medical images to detect and diagnose diseases, misdiagnosis still occurs. We selected digital breast tomosynthesis (DBT) images as a sample medical images with different breast densities and structures using digital breast phantoms (Bakic and XCAT). Two types of lesions (with distinct spatial frequency properties) were randomly inserted in the phantoms during projections to generate abnormal cases. Six human observers participated in observer study designed for a locating and detection of an 3-mm sphere lesion and 6-mm spicule lesion in reconstructed in-plane DBT slices. We collected eye-gaze data to estimate gaze metrics and to examine differences in visual attention mechanisms. We found that detection performance in complex visual environments is strongly constrained by later perceptual stages, with decision failures accounting for the largest proportion of errors. Signal detectability is jointly influenced by both target morphology and background complexity, revealing a critical interaction between local signal features and global anatomical noise. Increased fixation duration on spiculated lesions suggests that visual attention is differentially engaged depending on background and signal spatial frequency dependencies.

Material Decomposition in Photon-Counting Computed Tomography with Diffusion Models: Comparative Study and Hybridization with Variational Regularizers

2026-01-13T16:26:34Z

Photon-counting computed tomography (PCCT) has emerged as a promising imaging technique, enabling spectral imaging and material decomposition (MD). However, images typically suffer from a low signal-to-noise ratio (SNR) due to constraints such as low photon counts and sparse-view settings which provoke artifacts. To prevent this, variational methods minimize a data-fit function coupled with handcrafted regularizers that mimic a prior by enforcing image properties such as gradient sparsity. In the last few years, diffusion models (DMs) have become predominant in the field of generative models and have been used as a learned prior for image reconstruction. This work investigates the use of DMs as regularizers for MD tasks in PCCT, specifically using diffusion posterior sampling (DPS) guidance. Three DPS-based approaches -- image-domain two-step DPS (im-TDPS), projection-domain two-step DPS (proj-TDPS), and one-step DPS (ODPS) -- are evaluated. The first two methods achieve MD in two steps by performing reconstruction and MD separately. The last method, ODPS, samples the material images directly from the measurement data. The results indicate that ODPS achieves superior performance compared to im-TDPS and proj-TDPS, providing sharper, noise-free and crosstalk-free images. Furthermore, we introduce a novel hybrid method for scenarios involving materials absent from the training dataset which combines DM priors with standard variational handcrafted regularizers for the materials unknown to the DM. This hybrid method demonstrates improved MD quality compared to a standard variational method and does not require additional training of the DM neural network (NN).

Percentile-based probabilistic optimization for systematic and random uncertainties in radiation therapy

2026-01-13T15:15:43Z

Geometric uncertainty can degrade treatment quality in radiation therapy. While margins and robust optimization mitigate these effects, they provide only implicit control over clinical goal fulfillment probability. We therefore develop a probabilistic planning framework using a percentile-based optimization function that targets a specified probability of clinical goal fulfillment. Systematic and random uncertainties were explicitly modeled over full treatment courses. A scenario dose approximation method based on interpolation between a fixed set of doses was used, enabling efficient simulation of treatment courses during optimization. The framework was evaluated on a prostate case treated with volumetric-modulated arc therapy (VMAT) and a brain case treated with pencil beam scanning (PBS) proton therapy. Plans were compared to conventional margin-based and worst-case robust optimization using probabilistic evaluation. For the prostate case, probabilistic optimization improved organ at risk (OAR) sparing while maintaining target coverage compared to margin-based planning, increasing average OAR goal fulfillment probability by 13.3 percentage points and reducing 90th percentile OAR doses by an average of 3.5~Gy. For the brain case, probabilistic optimization improved target minimum dose passing probabilities (e.g., 88\% vs.~22\% for $D_{95}$) and brainstem maximum dose passing probability (70\% vs.~30\%), while maintaining comparable or improved OAR sparing compared to worst-case optimization. Probabilistic optimization enables explicit and interpretable control over goal fulfillment probabilities. Combining full treatment course modeling with efficient approximate dose calculation, the proposed framework improved the trade-off between target coverage and OAR sparing compared to conventional planning approaches in both photon and proton therapy.

Generative Consistency Models for Estimation of Kinetic Parametric Image Posteriors in Total-Body PET

2026-01-13T01:24:34Z

Dynamic total body positron emission tomography (TB-PET) makes it feasible to measure the kinetics of all organs in the body simultaneously which may lead to important applications in multi-organ disease and systems physiology. Since whole-body kinetics are highly heterogeneous with variable signal-to-noise ratios, parametric images should ideally comprise not only point estimates but also measures of posterior statistical uncertainty. However, standard Bayesian techniques, such as Markov chain Monte Carlo (MCMC), are computationally prohibitive at the total body scale. We introduce a generative consistency model (CM) that generates samples from the posterior distributions of the kinetic model parameters given measured time-activity curves and arterial input function. CM is able to collapse the hundreds of iterations required by standard diffusion models into just 3 denoising steps. When trained on 500,000 physiologically realistic two-tissue compartment model simulations, the CM produces similar accuracy to MCMC (median absolute percent error < 5%; median K-L divergence < 0.5) but is more than five orders of magnitude faster. CM produces more reliable Ki images than the Patlak method by avoiding the assumption of irreversibility, while also offering valuable information on statistical uncertainty of parameter estimates and the underlying model. The proposed framework removes the computational barrier to routine, fully Bayesian parametric imaging in TB-PET and is readily extensible to other tracers and compartment models.