Morphology-, Noise-, and Resolution-Robust Ultrasound Elasticity Imaging with Fourier Neural Operators

2026-01-21T06:08:35Z

Ultrasound-based elasticity imaging is a non-invasive technique for estimating tissue stiffness fields from displacement fields obtained by comparing ultrasound signals before and after compression. While recent deep learning approaches have enabled faster and more accurate elasticity estimation compared to traditional methods, several challenges remain for clinical translation. In this study, we employ finite element simulations of free-hand palpation to investigate the applicability of the Fourier neural operator (FNO). Four practical scenarios were investigated: (1) prediction across diverse lesion morphologies, (2) generalization to cases with lesion counts differing from those in the training data, (3) robustness to noise in measured displacement fields, and (4) resilience to variations in ultrasound device resolution. Across these tasks, FNO consistently outperformed baseline models such as U-Net and DeepONet in predictive accuracy and generalization, while maintaining robustness under noise and resolution changes. Validated through in silico simulations, these findings demonstrate the potential of FNO as a framework that could facilitate translation of elasticity imaging toward clinical practice.

Dosimetry for Proton Therapy Using a β-Ga$_2$O$_3$ Metal-Semiconductor-Metal Detector with Low-Noise Amplification

2026-01-21T05:00:05Z

Intensity-modulated proton therapy (IMPT) employs proton radiation rather than conventional X-rays to treat cancerous tumors. This approach offers significant advantages by minimizing the radiation exposure of surrounding healthy tissue, leading to improved patient outcomes and reduced side effects compared to traditional X-ray therapy. To ensure patient safety, each treatment plan must be experimentally validated before clinical implementation. However, current dosimetry devices face limitations in performing angled beam measurements and obtaining multi-depth assessments, both of which are essential for verifying IMPT treatment plans. In this study, the performance of a β-Ga$_2$O$_3$-based metal-semiconductor-metal (MSM) detector with a low-noise amplifier is studied and evaluated under various proton radiation doses and energy levels delivered by a MEVION S250i proton accelerator. The detector performance is also compared with that of an ionization chamber. The β-Ga$_2$O$_3$ detector exhibits a linear response with proton dose for single-spot irradiations, and its response to varying proton energies closely matches both the ion chamber data and simulated dose distributions. These findings highlight the potential of β-Ga$_2$O$_3$-based detectors as robust dosimetry devices for IMPT applications.

Automatic skull-template alignment without a guidance image

2026-01-20T23:07:59Z

Transcranial ultrasound must overcome the significant challenge of the human skull, limiting both imaging and therapeutic applications. While high-fidelity numerical simulations can compensate for skull-induced distortions, they require precise skull templates (typically derived from Computed Tomography, CT) and spatial alignment to the patient's anatomy. Current alignment relies on concurrent Magnetic Resonance Imaging (MRI) for registration, introducing financial, logistical, and throughput barriers. To overcome these challenges, we present Manifold Optimisation for Full-Waveform Inversion (MOFI), a method to register skull templates without using a guidance image. Our method aligns the skull template by minimising the difference between simulated and observed radio-frequency acoustic data. We demonstrate that MOFI accurately recovers the position of skull templates in silico and in vitro, offering an alternative to MRI guidance-based registration. These results indicate that MOFI has the potential to be a practical alternative to MRI-guided approaches, reducing the barriers to wider clinical adoption of transcranial ultrasound.

Toward Ultra-fast Treatments: Large Energy Acceptance Beam Delivery Systems and Opportunities for Proton Beam Therapy

2026-01-20T04:03:14Z

Treatment delivery is largely determined by capabilities of the beam delivery system (BDS), where faster delivery can have many potential benefits including improved dosimetric quality, utility, cost effectiveness, patient throughput and comfort. Despite significant developments in accelerators, delivery methodologies, dose optimisation and more, the energy layer switching time (ELST) is still a persisting limitation in existing BDS. The ELST can contribute significantly to beam delivery time (BDT) and extend treatment times, requiring compensation by optimisation planning approaches, motion mitigation strategies, or active beam modification. This fundamental constraint can be addressed by increasing the narrow energy acceptance range of conventional beamlines to minimise the ELST, enabling ultra-fast delivery. A large energy acceptance (LEA) BDS has the potential to revolutionise PBT through immediate improvements to current treatment delivery and emerging delivery modalities: the complete exploitation of PBT - and unlocking its full potential - can only be made possible with advances in beam delivery technologies. We review the abundant opportunities offered by an ultra-fast BDS: shorter treatment times, reduced motion induced dose degradation, improved effectiveness of motion management techniques, possibilities for volumetric rescanning, bidirectional delivery, further planning optimisation, and novel delivery strategies. We overview the design concepts of several LEA proposals, technology requirements, and also discuss the remaining challenges and considerations with realising a LEA BDS in practice. There are multiple avenues requiring further development and study, however the clinical potential and benefits of this enabling technology are clear: ultra-fast delivery offers both immediate and future improvements to PBT treatments.

Circularly polarized light scattering imaging of a cancerous layer creeping under a healthy layer for the diagnosis of early-stage cervical cancer

2026-01-20T03:48:48Z

Significance: Cervical cancer progresses through cervical intraepithelial neoplasia (CIN), which are precursor lesions of cervical cancer. In low-grade CIN, atypical cells generate inside the squamous epithelium, which causes the accuracy of cytodiagnosis for cervical cancer not to be very high. The grade of CIN can be estimated by the depth of atypical cell infiltration from the basal layer to the surface, rather than the abnormality of cells. Therefore, a non-invasive method is required to evaluate the depths of abnormal cells hidden at depths. Aim: Cancerous tissues beneath healthy tissues were experimentally identified by using circularly polarized light scattering (CiPLS). This method enabled the changes in the size of the cell nuclei within the penetration depth in tissue to be investigated. Approach: Artificial unexposed cancerous tissues were prepared that consisted of healthy/cancerous/healthy layers with various thicknesses of the topmost healthy layer and the cancerous layer. A polarization imaging camera with a quarter-wave plate was used to create distribution images of the circular polarization of the scattered light. Results: CiPLS images indicated that the thickness variation of the top healthy layer (the depth of the cancerous layer) caused significant changes in the degree of circular polarization. Conclusions: The depth of unexposed cancer lying within the optical penetration depth can be evaluated using a circular polarization imaging system based on the CiPLS method. These findings will lead to the development of a non-invasive optical diagnostic method for early-stage cervical cancer, potentially improving early detection and treatment outcomes.

VAST: Vascular Flow Analysis and Segmentation for Intracranial 4D Flow MRI

2026-01-19T21:00:42Z

Four-dimensional (4D) Flow MRI can noninvasively measure cerebrovascular hemodynamics but remains underused clinically because current workflows rely on manual vessel segmentation and yield velocity fields sensitive to noise, artifacts, and phase aliasing. We present VAST (Vascular Flow Analysis and Segmentation), an automated, unsupervised pipeline for intracranial 4D Flow MRI that couples vessel segmentation with physics-informed velocity reconstruction. VAST derives vessel masks directly from complex 4D Flow data by iteratively fusing magnitude- and phase-based background statistics. It then reconstructs velocities via continuity-constrained phase unwrapping, outlier correction, and low-rank denoising to reduce noise and aliasing while promoting mass-consistent flow fields, with processing completing in minutes per case on a standard CPU. We validate VAST on synthetic data from an internal carotid artery aneurysm model across SNR = 2-20 and severe phase wrapping (up to five-fold), on in vitro Poiseuille flow, and on an in vivo internal carotid aneurysm dataset. In synthetic benchmarks, VAST maintains near quarter-voxel surface accuracy and reduces velocity root-mean-square error by up to fourfold under the most degraded conditions. In vitro, it segments the channel within approximately half a voxel of expert annotations and reduces velocity error by 39% (unwrapped) and 77% (aliased). In vivo, VAST closely matches expert time-of-flight masks and lowers divergence residuals by about 30%, indicating a more self-consistent intracranial flow field. By automating processing and enforcing basic flow physics, VAST helps move intracranial 4D Flow MRI toward routine quantitative use in cerebrovascular assessment.

Pixelwise Uncertainty Quantification of Accelerated MRI Reconstruction

2026-01-19T17:12:28Z

Parallel imaging techniques reduce magnetic resonance imaging (MRI) scan time but image quality degrades as the acceleration factor increases. In clinical practice, conservative acceleration factors are chosen because no mechanism exists to automatically assess the diagnostic quality of undersampled reconstructions. This work introduces a general framework for pixel-wise uncertainty quantification in parallel MRI reconstructions, enabling automatic identification of unreliable regions without access to any ground-truth reference image. Our method integrates conformal quantile regression with image reconstruction methods to estimate statistically rigorous pixel-wise uncertainty intervals. We trained and evaluated our model on Cartesian undersampled brain and knee data obtained from the fastMRI dataset using acceleration factors ranging from 2 to 10. An end-to-end Variational Network was used for image reconstruction. Quantitative experiments demonstrate strong agreement between predicted uncertainty maps and true reconstruction error. Using our method, the corresponding Pearson correlation coefficient was higher than 90% at acceleration levels at and above four-fold; whereas it dropped to less than 70% when the uncertainty was computed using a simpler a heuristic notion (magnitude of the residual). Qualitative examples further show the uncertainty maps based on quantile regression capture the magnitude and spatial distribution of reconstruction errors across acceleration factors, with regions of elevated uncertainty aligning with pathologies and artifacts. The proposed framework enables evaluation of reconstruction quality without access to fully-sampled ground-truth reference images. It represents a step toward adaptive MRI acquisition protocols that may be able to dynamically balance scan time and diagnostic reliability.

In Vivo Quantification of Arterial Active Mechanics Using Deep Learning-Assisted Pressure-Area Analysis

2026-01-19T00:26:48Z

Active arterial mechanics, governed by vascular smooth muscle contraction, are critical to physiological regulation, cardiovascular disease progression, and clinical diagnosis. Although various in vivo methods have been developed to assess arterial stiffness, most cannot distinguish the contribution of smooth muscle tone; therefore, quantitative characterization of arterial activity remains challenging. In this study, we developed a pressure-area analysis framework integrating ultrasound imaging, blood pressure measurement, neural network-based segmentation of arterial cross-sectional area, and biomechanical model-driven inversion to infer active mechanical properties. A total of 233 volunteers (aged 18-65 year) were recruited to acquire cross-sectional ultrasound videos of the right common carotid artery for training the neural network. The segmentation results demonstrate good spatial and temporal performance of the neural network. We further recruited 10 additional volunteers (aged 25 +/- 3 year) to perform a 1-minute step test, followed by pressure-area measurements over a 30-minute recovery period. Using the proposed approach, we quantified post-exercise changes in carotid arterial active mechanics relative to baseline (i.e., the resting state). Results showed that active mechanics remained elevated for approximately 15 minutes compared to baseline (p < 0.05), whereas systolic pressure differed significantly only within the first approximately 5 minutes post-exercise (p < 0.001). These results indicate a dissociation between blood pressure and smooth muscle recovery, which may offer new insight into vascular smooth muscle regulation during physiological stress.

Wavefront Shaping of Ultrasound Vortex through the Human Skull Enabled by Binary Acoustic Metasurfaces

2026-01-18T14:49:19Z

Ultrasound vortices have rapidly expanded their applications to areas like particle trapping, contactless manipulation, acoustic communications. In ultrasonic imaging and therapy involving bone tissues, these vortex beams offer intriguing possibilities but transmitting them through bone (especially the skull) poses challenges. Traditional acoustic lenses were engineered to rectify skull-induced beam aberration, and their capacity was limited to generating only static ultrasound fields within the brain. To overcome this constraint, our study presents a novel method for transcranially steering focused ultrasound vortex using 3D printed binary acoustic metasurfaces (BAMs) with a thickness of 0.8 λ. We tackled the challenge of skull-induced phase aberration by computing the phase distribution via a time reversal technique, which concurrently enabled the generation of a steerable focused vortex inside an ex vivo human skull by adjusting the operating frequency. Both numerical and simulations experiments were conducted to validate the capabilities of BAMs. Furthermore, we explored the generation of higher-order topological charge acoustic vortices within the brain utilizing the BAM. This development paves the way for designing cost-effective particle-trapping systems, facilitating clot manipulation, and applying acoustic-radiation forces and torques within or across bone structures, thus presenting a new frontier for potential biomedical applications.

Dose-LET Interactions Predict Capsular Contracture After Proton Postmastectomy Radiation Therapy

2026-01-16T19:27:23Z

Pencil beam scanning (PBS) proton therapy provides highly conformal dose distributions that are increasingly leveraged for postmastectomy radiation therapy (PMRT) to reduce cardiopulmonary exposure. However, implant-based reconstruction in the setting of PMRT remains vulnerable to capsular contracture, and biological mechanisms of possible high linear energy transfer (LET) in PBS have not been well characterized. A retrospective case-control study was conducted on consecutive breast cancer patients who underwent mastectomy followed by implant-based reconstruction and proton PMRT (50 Gy in 25 fractions) between 2015 and 2021. Dose-LET volume histograms (DLVHs) were calculated for peri-implant tissue (5-mm shell around the implant). Generalized linear mixed-effects regression (GLMER) was employed to identify DLVH indices significantly associated with capsular contracture. Spearman correlation analysis was used to eliminate redundance. DLVCs were derived from receiver operating characteristic (ROC) analysis and validated using support vector machine (SVM)-based normal tissue complication probability (NTCP) model. Eight capsular contracture and 16 matched controls patients were analyzed. Three independent and significant DLVH indices were identified(p<0.01). The corresponding DLVCs were: V(55.8 Gy[RBE=1.1], 2.2 keV/μm) < 0.0033%, V(50.3 Gy[RBE=1.1], 5.4 keV/μm) < 0.0017%, and V(32.8 Gy[RBE=1.1], 0.9 keV/μm) > 96.98%. The SVM-based NTCP model achieved an area under the ROC curve (AUROC) of 0.867, with 91.7% accuracy, 87.5% sensitivity, and 93.8% specificity. Capsular contracture following proton PMRT is significantly associated with the synergistic interplay between dose and LETd in peri-implant tissue. The derived DLVCs provide actionable dosimetric constraints that can be integrated into treatment planning to minimize capsular contracture risk in proton PMRT.

Building Digital Twins of Different Human Organs for Personalized Healthcare

2026-01-16T14:15:06Z

Digital twins are virtual replicas of physical entities and are poised to transform personalized medicine through the real-time simulation and prediction of human physiology. Translating this paradigm from engineering to biomedicine requires overcoming profound challenges, including anatomical variability, multi-scale biological processes, and the integration of multi-physics phenomena. This survey systematically reviews methodologies for building digital twins of human organs, structured around a pipeline decoupled into anatomical twinning (capturing patient-specific geometry and structure) and functional twinning (simulating multi-scale physiology from cellular to organ-level function). We categorize approaches both by organ-specific properties and by technical paradigm, with particular emphasis on multi-scale and multi-physics integration. A key focus is the role of artificial intelligence (AI), especially physics-informed AI, in enhancing model fidelity, scalability, and personalization. Furthermore, we discuss the critical challenges of clinical validation and translational pathways. This study not only charts a roadmap for overcoming current bottlenecks in single-organ twins but also outlines the promising, albeit ambitious, future of interconnected multi-organ digital twins for whole-body precision healthcare.

Data Standards in Audiology: A Mixed-Methods Exploration of Community Perspectives and Implementation Considerations

2026-01-16T10:23:32Z

Objective: This study addresses conceptual issues around data standardisation in audiology, and outlines steps toward achieving it. It reports a survey of the computational audiology community on their current understanding, needs, and preferences concerning data standards. Based on survey findings and a panel discussion, recommendations are made concerning moving forward with standardisation in audiology. Design: Mixed-methods: 1) review of existing standardisation efforts; 2) a survey of the computational audiology community; 3) expert panel discussion in a dedicated session at the 2024 Virtual Conference of Computational Audiology. Sample: Survey: 82 members of the global community; Panel discussion: five experts. Results: A prerequisite for any global audiology database are agreed data standards. Although many are familiar with the general idea, few know of existing initiatives, or have actively participated in them. Ninety percent of respondents expressed willingness to follow or contribute to standardisation efforts. The panel discussed relevant initiatives (e.g. OMOP, openEHR, Noah) and explored both challenges (around harmonisation) and opportunities (alignment with other medical fields and conversion among approaches). Conclusions: Combining conceptual discussion with stakeholder views, the study offers guidance for implementing interoperable data standards in audiology. It highlights community support, key issues to address, and suggests paths for future work.

Generation of Chest CT pulmonary Nodule Images by Latent Diffusion Models using the LIDC-IDRI Dataset

2026-01-16T08:36:12Z

Recently, computer-aided diagnosis systems have been developed to support diagnosis, but their performance depends heavily on the quality and quantity of training data. However, in clinical practice, it is difficult to collect the large amount of CT images for specific cases, such as small cell carcinoma with low epidemiological incidence or benign tumors that are difficult to distinguish from malignant ones. This leads to the challenge of data imbalance. In this study, to address this issue, we proposed a method to automatically generate chest CT nodule images that capture target features using latent diffusion models (LDM) and verified its effectiveness. Using the LIDC-IDRI dataset, we created pairs of nodule images and finding-based text prompts based on physician evaluations. For the image generation models, we used Stable Diffusion version 1.5 (SDv1) and 2.0 (SDv2), which are types of LDM. Each model was fine-tuned using the created dataset. During the generation process, we adjusted the guidance scale (GS), which indicates the fidelity to the input text. Both quantitative and subjective evaluations showed that SDv2 (GS = 5) achieved the best performance in terms of image quality, diversity, and text consistency. In the subjective evaluation, no statistically significant differences were observed between the generated images and real images, confirming that the quality was equivalent to real clinical images. We proposed a method for generating chest CT nodule images based on input text using LDM. Evaluation results demonstrated that the proposed method could generate high-quality images that successfully capture specific medical features.

Visual question answering-based image-finding generation for pulmonary nodules on chest CT from structured annotations

2026-01-16T08:21:26Z

Interpretation of imaging findings based on morphological characteristics is important for diagnosing pulmonary nodules on chest computed tomography (CT) images. In this study, we constructed a visual question answering (VQA) dataset from structured data in an open dataset and investigated an image-finding generation method for chest CT images, with the aim of enabling interactive diagnostic support that presents findings based on questions that reflect physicians' interests rather than fixed descriptions. In this study, chest CT images included in the Lung Image Database Consortium and Image Database Resource Initiative (LIDC-IDRI) datasets were used. Regions of interest surrounding the pulmonary nodules were extracted from these images, and image findings and questions were defined based on morphological characteristics recorded in the database. A dataset comprising pairs of cropped images, corresponding questions, and image findings was constructed, and the VQA model was fine-tuned on it. Language evaluation metrics such as BLEU were used to evaluate the generated image findings. The VQA dataset constructed using the proposed method contained image findings with natural expressions as radiological descriptions. In addition, the generated image findings showed a high CIDEr score of 3.896, and a high agreement with the reference findings was obtained through evaluation based on morphological characteristics. We constructed a VQA dataset for chest CT images using structured information on the morphological characteristics from the LIDC-IDRI dataset. Methods for generating image findings in response to these questions have also been investigated. Based on the generated results and evaluation metric scores, the proposed method was effective as an interactive diagnostic support system that can present image findings according to physicians' interests.

Physiological-model-based neural network for modeling the metabolic-heart rate relationship during physical activities

2026-01-16T01:58:33Z

Heart failure (HF) poses a significant global health challenge, with early detection offering opportunities for improved outcomes. Abnormalities in heart rate (HR), particularly during daily activities, may serve as early indicators of HF risk. However, existing HR monitoring tools for HF detection are limited by their reliability on population-based averages. The estimation of individualized HR serves as a dynamic digital twin, enabling precise tracking of cardiac health biomarkers. Current HR estimation methods, categorized into physiologically-driven and purely data-driven models, struggle with efficiency and interpretability. This study introduces a novel physiological-model-based neural network (PMB-NN) framework for HR estimation based on oxygen uptake (VO2) data during daily physical activities. The framework was trained and tested on individual datasets from 12 participants engaged in activities including resting, cycling, and running. By embedding physiological constraints, which were derived from our proposed simplified human movement physiological model (PM), into the neural network training process, the PMB-NN model adheres to human physiological principles while achieving high estimation accuracy, with a median R$^2$ score of 0.8 and an RMSE of 8.3 bpm. Comparative statistical analysis demonstrates that the PMB-NN achieves performance on par with the benchmark neural network model while significantly outperforming traditional physiological model (p=0.002). In addition, our PMB-NN is adept at identifying personalized parameters of the PM, enabling the PM to generate reasonable HR estimation. The proposed framework with a precise VO2 estimation system derived from body movements enables the future possibilities of personalized and real-time cardiac monitoring during daily life physical activities.