A microscopic computational simulation of [18F]FDG transport and metabolism identifies valid regimes for compartmental analysis

2026-07-31T23:59:17Z

18F-fluorodeoxyglucose ([18F]FDG) positron emission tomography (PET), combined with compartmental modeling, is a powerful non-invasive imaging method for assessing cellular metabolism. However, classical two- and three-tissue compartment models assume homogeneous [18F]FDG distribution within the tissue, which needs justification, and the definition and interpretation of rate constants across these models is not always consistent. To address these issues, we develop a finite difference solver to simulate [18F]FDG transport and metabolism within a 1 mm3 tissue volume, representing the smallest volume resolvable by PET. Our simulations reveal sub-millimeter heterogeneity in [18F]FDG distribution and show that the measured PET signal is dependent not only on cellular metabolic activity but also on interstitial [18F]FDG diffusivity, vascular permeability, and vascular architecture. We further demonstrate that our finite-difference simulation reduces to a three-tissue compartment model when interstitial [18F]FDG concentration is homogeneous. Furthermore, this simplified model itself reduces to the two-tissue compartment model when vascular permeability is sufficiently high. This work quantitatively links vascular permeability, vascular architecture, cellular uptake kinetics, [18F]FDG diffusivity, and acquisition time. It also unifies the two- and three-tissue compartment models and identifies their applicable regimes. These findings deepen our understanding of [18F]FDG transport kinetics and enhance the interpretability of dynamic [18F]FDG-PET imaging.

A fullwave model of the nonlinear wave equation with multiple relaxations and relaxing perfectly matched layers for high-order numerical finite-difference solutions

2026-07-31T15:11:34Z

Large-scale acoustic simulations underpin the development of ultrasound imaging and therapy, but modeling nonlinearity, frequency-dependent attenuation, and absorbing boundaries in heterogeneous tissue remains computationally demanding. We present Fullwave 2, a unified time-domain formulation with arbitrary power-law tissue attenuation and perfectly matched layers (PMLs) within a single framework suited to high-order finite difference solution. Attenuation and dispersion are encoded directly into complex coordinate-stretched spatial derivatives through multiple relaxation mechanisms. Because the same mechanism describes both interior tissue attenuation and the absorbing boundary, the convolutional PML (C-PML) becomes a special case of the domain-wide model and adds no extra computational burden. The formulation preserves the structure of the d'Alembertian operator, which allows high-order staggered-grid finite difference stencils optimized for long-distance propagation, and a two-stage C-PML with a transition region is introduced to ensure numerical stability in the presence of multiple relaxations. The domain-wide multiple relaxation model reproduces power-law attenuation with less than 5% attenuation error and 0.5% phase-velocity error over 1-20 MHz. The two-stage C-PML reaches reflection coefficients below -49 dB with a compact 4 lambda footprint. Nonlinear propagation is validated against a 1D Burgers solution, with agreement up to the 7^(th) harmonic. The framework is demonstrated on 2D abdominal wall imaging and 3D transcranial rat skull simulations, where it accurately captures complex scattering and aberration artifacts. Fullwave 2 unifies nonlinear propagation, arbitrary power-law attenuation, and absorbing boundaries in a single, computationally efficient time-domain formulation, providing an accurate and scalable wave propagation tool for medical ultrasound research.

CBCT-IQ: A Publicly Available Annotated Cone-Beam CT Dataset for Image Quality Assessment and Benchmarking

2026-07-31T10:24:20Z

Medical image quality plays a critical role in diagnostic accuracy, especially in X-ray-based imaging modalities such as cone-beam computed tomography (CBCT), where image quality must be balanced against radiation dose. While expert visual evaluation remains the clinical standard for image quality evaluation, it is time-consuming, subjective and affected by inter-observer variability, emphasizing the need for reliable quantitative image quality assessment (IQA) methods. However, the development and validation of such IQA methods have been limited by the lack of publicly available CBCT datasets with expert image quality annotations. In this study, we provide the first open-access CBCT IQA dataset containing 1,764 annotated image slices acquired using systematic variations in image acquisition and reconstruction parameters. Three clinical experts graded the overall image quality and a predefined regions of interest (ROI) using a four-level scoring scheme. In addition, we benchmark 26 full reference- and no reference-based IQA measures against expert annotations and introduce an exploratory IQA measure-based ranking capable of distinguishing subtle image quality differences. This dataset introduced a standardized benchmark for future CBCT IQA research and provides a valuable resource for the development and validation of new IQA methods, enabling reproducible research and advancing CBCT IQA.

Trans-stenotic pressure drop estimation from PC-MRI and ultrasound imaging velocimetry using a modified Bernoulli equation

2026-07-31T09:55:24Z

Accurate non-invasive estimation of trans-stenotic pressure gradients remains a challenge. In clinical practice, pressure gradients are often estimated from velocity measurements using Bernoulli-based formulas, but these simplified relations do not explicitly account for how pressure losses change with the flow regime. Here, we introduce a modified Bernoulli (MB) formulation that incorporates regime-dependent pressure losses through a Reynolds-number-dependent loss coefficient. Steady in-vitro experiments were performed in an idealized stenosis model over physiologically relevant flow rates (0.65-3.9 L/min), combining direct pressure measurements with ultrasound imaging velocimetry and phase-contrast magnetic resonance imaging (PC-MRI) to measure velocities. The MB model was calibrated from the measured pressure drops and then evaluated against the simplified Bernoulli (SB) and extended Bernoulli (EB) formulations. Over the tested flow regime, MB agreed best with the measurements. SB and EB showed larger biases, with errors of roughly 10-55% (SB) and -15 to 25% (EB), and overestimated the pressure drop in the clinically relevant range. We additionally quantified the effect of PC-MRI in-plane pixel size on MRI-based pressure estimates. Coarse sampling of the stenosis throat led to systematic underestimation of flow rate and bulk velocity and, consequently, of the MB-predicted pressure drop. In contrast, the peak throat velocity was substantially less sensitive to pixel size, resulting in smaller estimation errors when used as input for the MB. Overall, the results demonstrate that accounting for flow-regime-dependent loss mechanisms enhances pressure drop estimation, and that sufficient sampling of the stenotic throat is crucial for MRI-based flow rate and pressure drop estimation. In addition, peak-velocity-based MB pressure drop estimations are less sensitive to pixel size.

Intestinal peristalsis and wrinkling: A novel paradigm

2026-07-31T09:22:56Z

A new computational framework for modeling the intestinal wall as a multi-layered fiber-reinforced continuum is presented. The framework reproduces for the first time physiological motility and overcoming large-displacements limitations (self-contact and volume locking) occurring in classical hyperelastic formulations of soft tissues. We introduce: i) layer-specific functions, segregating active circumferential and longitudinal muscle fibers while maintaining homogeneous passive reinforcement, and ii) a quasi-incompressible volumetric contribution, to handle large peristaltic contractions. Cell electrophysiology is further extended to reproduce both slow waves and spike bursting activities thus mimicking for the first time a localized neural excitation in a three-dimensional geometry of small intestine segment. We introduce a spatio-temporal modulation of contractility to accurately capture activation driven by both slow waves and spike bursts. The overall coupled nonlinear electromechanical boundary valued problem is modeled following the active strain approach. A robust augmented-Lagrangian contact algorithm is also embedded to avoid self-penetration and geometrical instabilities under large displacements. The 8-variables nonlinear governing equations are then discretized using in house P1-P2-P4 finite elements codes implemented within the GetFEM library. Numerical experiments demonstrate the ability of the proposed framework to reproduce physiological peristalsis, i.e., wall contraction greater than 80%, thus allowing full occlusion matching in vivo endoscopic images, and naturally generating wrinkling patterns consistent with experimental observations. We show that an active electromechanics anisotropic heterogeneous modeling strategy is critical for a numerically stable and physiologically accurate representation of gastrointestinal motility.

MWF-MIMOSA for efficient simultaneous relaxometry and myelin water fraction mapping

2026-07-31T03:21:46Z

Quantitative magnetic resonance imaging (qMRI) provides improved sensitivity and specificity to tissue composition and pathological alterations compared with conventional contrast-weighted imaging. Among various qMRI biomarkers, myelin water imaging is of particular interest because myelin plays a central role in brain function and its alteration is closely associated with many neurological diseases. However, conventional myelin water fraction (MWF) mapping techniques are often limited by long scan times, low spatial resolution, reduced signal-to-noise ratio (SNR), and high specific absorption rate (SAR). Here, we propose MWF-MIMOSA for efficient simultaneous T1, T2, T2* mapping, magnetic susceptibility source separation, and MWF estimation. To achieve this, multi-contrast and multi-slice zero-shot self-supervised learning (MZS-SSL) was used to jointly reconstruct whole-brain complex-valued images. To improve computational efficiency of the parameter estimation step, a multilayer perceptron (MLP) was trained within the GACELLE GPU-accelerated parameter estimation framework to circumvent the computationally intensive Bloch simulation process, resulting in a >100-fold computational speed-up in MWF estimation. Numerical simulations were performed to evaluate the accuracy and precision of MWF-MIMOSA, and in-vivo results further demonstrated its robustness. Comparison with existing myelin water imaging methods showed that MWF-MIMOSA is highly correlated with established approaches, while providing complementary quantitative parameter maps at higher spatial resolution and with shorter scan times. Notably, simultaneous multi-parametric mapping was achieved in 5 min at 1 mm isotropic resolution, and in 10 min at 0.7 mm isotropic resolution. These results demonstrate the potential of MWF-MIMOSA for fast, high-resolution simultaneous relaxometry and myelin water imaging.

Active Lubrication of Transluminal Medical Instruments

2026-07-30T17:42:47Z

Transluminal minimally invasive surgery uses natural orifices and small incisions to access internal anatomical structures, promoting quicker recovery and reduced morbidity. However, navigating instruments such as catheters and endoscopes through anatomical pathways creates frictional interactions with luminal walls, risking complications such as perforation, poor haptic feedback, and instrument buckling. This paper presents an active lubrication sheath that controls friction on demand through discrete friction control modules distributed along its shaft. These modules employ ultrasonic vibrations at the instrument surface to generate a pressurized fluid layer at the contact interface, lubricating the interface and thereby reducing friction. We implemented these modules in a prototype catheter, which we validated under dry and liquid-lubricated conditions, across rigid and soft interfaces, and along varied anatomical curvatures. In a cardiac catheterization use case, active lubrication reduced friction by up to 42% on ex vivo porcine aorta tissue hydrated with phosphate-buffered saline, and thermal imaging measured an average temperature rise of 6.2 degrees Celsius at the module-tissue interface due to vibration, confirming its potential thermal safety. In a catheter insertion demonstration, active lubrication reduced friction-induced buckling and enabled smoother advancement through the lumen, further showcasing its potential impact. By minimizing injury risk and enhancing procedural stability, active lubrication can drastically enhance the safety and efficacy of transluminal interventions.

A reduced viscoelastic FDTD formulation for ultrasound-driven shear wave propagation in soft tissue

2026-07-30T15:59:47Z

Ultrasound-driven shear wave propagation in soft tissue underlies shear wave elastography (SWE) and emerging elastomechanical hypotheses of ultrasonic neuromodulation, both of which require accurate, efficient modeling of radiation-force--induced tissue motion. General-purpose finite-element elastodynamic solvers are often computationally expensive and unnecessarily broad for shear-dominant applications. We derive a reduced viscoelastic formulation by applying near-incompressibility, small-strain linearization, Helmholtz decomposition, and solenoidal force projection to the full Navier equations, yielding a Kelvin--Voigt shear wave equation that retains only the transverse dynamics relevant to radiation-force--induced motion. An explicit finite-difference time-domain (FDTD) implementation with second-order spatial and temporal accuracy enforces the solenoidal body-force constraint via a matrix-free conjugate-gradient Poisson solve. For separable radiation-force sources, a pre-computed projection reduces this cost by one to two orders of magnitude. In homogeneous media the solver recovers the theoretical shear wavespeed to within $<$0.1\%, exhibits clear second-order grid convergence (trace-$L_2$ self-convergence, $p\gtrsim2$), and matches analytical Kelvin--Voigt attenuation and phase speed to within ${\sim}3\%$ and $<$1\% over a 16-point viscosity sweep ($η\in[0,1.5]$~Pa$\cdot$s). An end-to-end RSNA QIBA phantom benchmark recovers shear wave speeds to within ${\sim}1\%$ across a tenfold shear-modulus range ($G=1$--$10$~kPa). The framework accommodates spatial heterogeneity in shear modulus, density, and viscosity, and integrates with acoustic simulators. Transcranial demonstrations through micro-CT skull geometries produce shear displacements of 1.7--5~$μ$m consistent with clinical ARFI.

Establishing an independent measurement traceability for 60-Co Air Kerma

2026-07-30T08:49:45Z

An independent air kerma traceability chain for $^{60}$Co radiation protection levels has been successfully established at the CIEMAT Ionizing Radiation Metrology Laboratory (LMRI-CIEMAT), based on the reference provided by the $^{137}$Cs primary standard. To achieve this, a secondary standard ionization chamber with an appropriate energy response was characterized, and its beam-quality correction factor, $k_Q$, was accurately determined via Monte Carlo simulations using the EGSnrc code. The method's accuracy was validated through a comparison with long-term historical calibration data and peer-confirmed through CIEMAT's successful participation in the EURAMET.RI(I)-S19 supplementary comparison, recently officially published in the BIPM KCDB. The excellent agreement achieved with international reference values demonstrates the high robustness and traceability independence of this newly implemented methodology.

Amplitude-based echo-mode speed-of-sound tomography

2026-07-30T08:11:00Z

The tissue's speed of sound (SoS) is a promising marker for non-invasive and zero-dose diagnosis of diseases such as cancer or liver steatosis. Computed ultrasound tomography in echo mode (CUTE) retrieves spatially resolved SoS using pulse-echo ultrasound, by analysing the variation of echoes when probed with varying pairs of transmit- and receive-steering angles. This analysis conventionally focuses on the echo phase shift, which is interpreted as differential time-of-flight (dToF) and related to SoS. While promising results have been obtained, the trade-off between beamwidth and angular aperture not only limits spatial resolution but also leads to artefactual noise in media with short-scale SoS variations. To overcome this limitation, we propose an alternative approach: for each echo, instead of reducing the angle-dependent variations to a single parameter (the dToF), we retrieve aberration profiles with sub-beamwidth resolution by inverting a model that relates these profiles to the echo amplitudes detected for all angle pairs. We demonstrate in simulations that this amplitude-based (a-CUTE) approach results in substantially improved spatial resolution and reduced artifacts compared to dToF-CUTE. Physical phantom and preliminary in vivo results confirm the feasibility of this novel method in physical data.

Bounded-Latency Spherical-Histogram Reconstruction for Compton Cameras

2026-07-30T07:17:31Z

Gamma-ray imaging with Compton cameras is computationally demanding because conventional reconstruction retains the list-mode acquisition inside the inversion loop: event-dependent cone/voxel interactions must be recomputed as the event count grows. We present a spherical-histogram framework in which each Compton event is encoded online into detector-centred angular histograms. Volumetric reconstruction is then performed from coherent histogram snapshots using a precomputed sparse projection operator. This turns the event stream into a bounded reconstruction state, decoupling event accumulation from iterative inversion. The method supports multi-view and multi-resolution operation, non-blocking acquisition, and iterative forward/backward reconstruction whose dominant cost depends.

Three-Photon Bayesian Imaging of Ortho-Positronium

2026-07-30T06:28:31Z

PET provides functional images relying on two-photon coincidences from positron-electron annihilation. In human tissue, about 40\% of annihilations are preceded by Ps formation, of which o-Ps component partially decays into three photons, with the remainder annihilating via pick-off or spin-exchange into two photons. This three-photon channel carries additional information about the surrounding micro-environment, including the three-to-two-photon yield ratio as a potential diagnostic marker. We propose the TRIO algorithm, a novel three-photon event-by-event image reconstruction algorithm formulated as a Bayesian maximum a posteriori inference problem. TRIO unifies time-based trilateration, energy-based reconstruction and, for the first time, a physics-informed prior derived from the QED description of Ps decay within a single probabilistic framework. In contrast to positronium lifetime imaging, which requires a prompt photon and is therefore restricted to specific radionuclides, TRIO relies solely on the three photons and is fully compatible with standard radionuclides such as 18F. Monte Carlo simulation modelled after the Siemens Biograph Quadra scanner demonstrates a mean position error of 1.62~cm, improving by approximately a factor of two over the time-based trilateration (3.05 cm) and by about an order of magnitude over energy-based reconstruction alone (18 cm). More importantly, the proposed Bayesian approach is compatible with existing TOF-PET scanners that can register three-photon annihilation coincidences.

Rethinking Artificial Intelligence in Medical Imaging: Assumptions, Reality, and Reframing

2026-07-29T19:55:49Z

Medical imaging has served as primary proving ground for clinical artificial intelligence (AI), yet a decade of intense research has not translated into proportionate bedside impact. We argue that this gap is not primarily a product of insufficient algorithmic performance, inadequate regulation, or limited explainability. Rather, it reflects a structural misalignment, between how AI systems are designed and evaluated, and how clinical decisions are made. This Perspective identifies six interconnected dimensions of this misalignment: the dominance of pixel-only models in a multimodal clinical world; the erosion of physician trust through opaque and inflexible systems; the unfulfilled promise of foundation models in data-sparse medical domains; the persistent bottleneck of non-shareable, under-curated datasets; the gap between validated algorithms and deployable clinical platforms; and the failure of prediction-centric AI to generate actionable clinical guidance. For each dimension, we reframe the problem and propose a path forward, culminating in a vision of agentic, physician-aligned AI that extends, rather than replaces, clinical judgment.

Non-invasive super-resolution imaging through scattering media using highly nonlinear labels

2026-07-29T15:19:39Z

While scattered light conveys most of the information we perceive, scattering may also distort that information before it reaches our detectors. The problem is acute in many applications, such as in high-resolution microscopy of biological tissue, where scattering degrades both resolution and signal-to-noise ratio. Here, for the first time, we demonstrate that combining two intrinsic properties of scattered light: speckle statistics and the memory effect, with highly non-linear optical response yields, rather surprisingly, super-resolution, low-background, non-invasive imaging of objects completely hidden behind a strongly scattering, opaque layers. Crucially, our technique of Nonlinear Imaging with Speckle Excitation (NISE) does not resort to wavefront shaping, adaptive optics, complicated optical setups, or iterative image reconstruction algorithms. Because the strategy relies solely on the properties of scattered light and high-order nonlinear response of the luminescent labels, it can be applied to any speckle-forming propagation, from biological tissue to multicore fibers, combined with any type of phenomenon that exhibits a sufficiently high order nonlinearity.

Beyond directions: Symmetry-aware rotation sets for triaxial diffusion encoding by geometric filter optimization

2026-07-29T06:28:42Z

Purpose: To improve the accuracy of diffusion-weighted powder average signals for diffusion encoding with arbitrary b-tensors. Methods: We identify an intrinsic dihedral ($D_2$) symmetry of diffusion signals for arbitrary diffusion encoding, which defines their natural signal space (a quotient of 3D rotations). Based on this, we propose a method to generate optimal rotation sets that are applied to the diffusion-encoding gradient waveform to yield powder averages with maximal accuracy. The method, termed ``Geometric Filter Optimization'' (GFO), amounts to designing a sampling filter that is approximately flat over the relevant part of the associated frequency space. We characterize the filter properties and benchmark performance in terms of the accuracy and precision of powder averages and higher-order rotational invariants, including comparison with spherical designs and electrostatic-repulsion-based designs defined on the same space. Results: We found that GFO leads to marked improvements in precision and accuracy in powder averaging over diffusion encoding b-tensors, including axisymmetric and triaxial configurations. For higher-order rotational invariants, the performance was more nuanced, with GFO, electrostatic repulsion, and spherical designs exhibiting different trade-offs in bias and precision depending on $b$ and $N$. Conclusion: A fundamental $D_2$-symmetry of tensor-valued diffusion encoding was shown to constrain its rotational structure and guide the design of optimal rotation sets. This yielded GFO, which provides an efficient recipe for obtaining orientations for powder averaging of signals with axisymmetric and triaxial diffusion encoding. It places no additional demands on gradient system performance and can be used to shorten scan time.