Multishot Dual Polarity GRAPPA: Robust Nyquist Ghost Correction for multishot EPI

2025-07-24T10:19:03Z

Purpose: This work aims to develop a robust Nyquist ghost correction method for multishot echo-planar imaging (EPI). The method helps correct challenging Nyquist ghosts, particularly on scanners with high-performance gradients or ultra-high fields. Methods: A method for multishot EPI ghost correction, called multishot dual-polarity GRAPPA (msDPG), is developed by extending the DPG concept to multishot readouts. msDPG employs tailored DPG kernels to address high-order phase differences between two EPI readout polarities, which cannot be fully addressed using linear phase correction (LPC). Advanced regularizers can be readily employed with the proposed msDPG for physiologic inter-shot phase variation correction during reconstruction. Additionally, a calibration refinement method is proposed to improve the quality of the DPG calibration data and enhance reconstruction performance. Results: Phantom and in vivo experiments on scanners with high-performance gradients and ultra-high fields demonstrated that msDPG achieved superior ghost correction performance than LPC, reducing the ghost-to-signal ratio (GSR) by over 50%. Compared to conventional DPG, msDPG provided images with lower noise amplification, particularly for acquisitions with large in-plane acceleration. Consequently, high-fidelity, submillimeter diffusion images were obtained using msDPG with regularized reconstruction. Conclusion: The proposed msDPG provides a robust Nyquist ghost correction method for multishot EPI, enabling submillimeter imaging with improved fidelity.

Direct Dual-Energy CT Material Decomposition using Model-based Denoising Diffusion Model

2025-07-24T01:00:06Z

Dual-energy X-ray Computed Tomography (DECT) constitutes an advanced technology which enables automatic decomposition of materials in clinical images without manual segmentation using the dependency of the X-ray linear attenuation with energy. However, most methods perform material decomposition in the image domain as a post-processing step after reconstruction but this procedure does not account for the beam-hardening effect and it results in sub-optimal results. In this work, we propose a deep learning procedure called Dual-Energy Decomposition Model-based Diffusion (DEcomp-MoD) for quantitative material decomposition which directly converts the DECT projection data into material images. The algorithm is based on incorporating the knowledge of the spectral DECT model into the deep learning training loss and combining a score-based denoising diffusion learned prior in the material image domain. Importantly the inference optimization loss takes as inputs directly the sinogram and converts to material images through a model-based conditional diffusion model which guarantees consistency of the results. We evaluate the performance with both quantitative and qualitative estimation of the proposed DEcomp-MoD method on synthetic DECT sinograms from the low-dose AAPM dataset. Finally, we show that DEcomp-MoD outperform state-of-the-art unsupervised score-based model and supervised deep learning networks, with the potential to be deployed for clinical diagnosis.

From Fiber Tracts to Tumor Spread: Biophysical Modeling of Butterfly Glioma Growth Using Diffusion Tensor Imaging

2025-07-23T17:15:40Z

Butterfly tumors are a distinct class of gliomas that span the corpus callosum, producing a characteristic butterfly-shaped appearance on MRI. The distinctive growth pattern of these tumors highlights how white matter fibers and structural connectivity influence brain tumor cell migration. To investigate this relation, we applied biophysical tumor growth models to a large patient cohort, systematically comparing models that incorporate fiber tract information with those that do not. Our results demonstrate that including fiber orientation data significantly improves model accuracy, particularly for a subset of butterfly tumors. These findings highlight the critical role of white matter architecture in tumor spread and suggest that integrating fiber tract information can enhance the precision of radiotherapy target volume delineation.

RAPID-Net: Accurate Pocket Identification for Binding-Site-Agnostic Docking

2025-07-23T16:44:22Z

Accurate identification of druggable pockets and their features is essential for structure-based drug design and effective downstream docking. Here, we present RAPID-Net, a deep learning-based algorithm designed for the accurate prediction of binding pockets and seamless integration with docking pipelines. On the PoseBusters benchmark, RAPID-Net-guided AutoDock Vina achieves 54.9% of Top-1 poses with RMSD < 2 A and satisfying the PoseBusters chemical-validity criterion, compared to 49.1% for DiffBindFR. On the most challenging time split of PoseBusters aiming to assess generalization ability (structures submitted after September 30, 2021), RAPID-Net-guided AutoDock Vina achieves 53.1% of Top-1 poses with RMSD < 2 A and PB-valid, versus 59.5% for AlphaFold 3. Notably, in 92.2% of cases, RAPID-Net-guided Vina samples at least one pose with RMSD < 2 A (regardless of its rank), indicating that pose ranking, rather than sampling, is the primary accuracy bottleneck. The lightweight inference, scalability, and competitive accuracy of RAPID-Net position it as a viable option for large-scale virtual screening campaigns. Across diverse benchmark datasets, RAPID-Net outperforms other pocket prediction tools, including PUResNet and Kalasanty, in both docking accuracy and pocket-ligand intersection rates. Furthermore, we demonstrate the potential of RAPID-Net to accelerate the development of novel therapeutics by highlighting its performance on pharmacologically relevant targets. RAPID-Net accurately identifies distal functional sites, offering new opportunities for allosteric inhibitor design. In the case of the RNA-dependent RNA polymerase of SARS-CoV-2, RAPID-Net uncovers a wider array of potential binding pockets than existing predictors, which typically annotate only the orthosteric pocket and overlook secondary cavities.

Multi-Angle Rotational Actuation in a 0.8-mm-Thick Preload-Free Piezoelectric Micromotor

2025-07-23T02:42:42Z

Micro motors can be used in numerous fields like Micro medical testing and treatment. To achieve a smaller size, micro piezoelectric motors in laboratories often omit the outer casing, which can lead to functional defects such as rotation only in one fixed direction or the need for external weights (which are not counted within the motors volume) to increase preload. However, this significantly reduces the practical value of micro piezoelectric motors. This paper proposes a new driving principle for piezoelectric motors to design a micro piezoelectric motor that can rotate at a wide range of angles (e.g. up to 80)without increasing the motors casing and does not require external weights, with a stator thickness of only 0.8 mm. This motor has significant application potential in OCT endoscopes and thrombectomy grinding heads

The Anatomy of Coronary Risk: How Artery Geometry Shapes Coronary Artery Disease through Blood Flow Haemodynamics -- Latest Methods, Insights and Clinical Implications

2025-07-23T01:10:31Z

Despite tremendous advances in cardiovascular medicine, significant opportunities remain to improve coronary artery disease (CAD) prevention and treatment strategies. The key limitation lies in the understanding of disease formation and progression mechanisms. The coronary anatomy plays an important role in local haemodynamics, governing endothelial health and, thus, pathophysiological responses. The significant variation of the coronary anatomy among patients, with significant trends across different populations, increases the complexity of understanding the details of disease progression. This review covers different aspects of the current status and understanding of the blood flow investigation in coronary arteries. We summarised the current knowledge of the haemodynamic effect of coronary anatomy and its evaluation and analysis methods. We discussed recent progress across medical imaging techniques and computational haemodynamic analysis. Based on the reviewed papers, we identified the persisting knowledge gaps and challenges in the field. We then elaborated on future directions and opportunities to increase understanding of the fundamental mechanism of CAD in individuals representative of large populations and how this may translate to the patient's bedside.

Physically Consistent Image Augmentation for Deep Learning in Mueller Matrix Polarimetry

2025-07-22T13:48:00Z

Mueller matrix polarimetry captures essential information about polarized light interactions with a sample, presenting unique challenges for data augmentation in deep learning due to its distinct structure. While augmentations are an effective and affordable way to enhance dataset diversity and reduce overfitting, standard transformations like rotations and flips do not preserve the polarization properties in Mueller matrix images. To this end, we introduce a versatile simulation framework that applies physically consistent rotations and flips to Mueller matrices, tailored to maintain polarization fidelity. Our experimental results across multiple datasets reveal that conventional augmentations can lead to falsified results when applied to polarimetric data, underscoring the necessity of our physics-based approach. In our experiments, we first compare our polarization-specific augmentations against real-world captures to validate their physical consistency. We then apply these augmentations in a semantic segmentation task, achieving substantial improvements in model generalization and performance. This study underscores the necessity of physics-informed data augmentation for polarimetric imaging in deep learning (DL), paving the way for broader adoption and more robust applications across diverse research in the field. In particular, our framework unlocks the potential of DL models for polarimetric datasets with limited sample sizes. Our code implementation is available at github.com/hahnec/polar_augment.

Aerosol deposition in mucus-lined ciliated airways

2025-07-22T11:46:00Z

We study the transport and deposition of inhaled aerosols in a mid-generation, mucus-lined lung airway, with the aim of understanding if and how airborne particles can avoid the mucus and deposit on the airway wall -- an outcome that is harmful in case of allergens and pathogens but beneficial in case of aerosolized drugs. We adopt the weighted-residual integral boundary-layer model of Dietze and Ruyer-Quil (J. Fluid Mech., vol. 762, 2015, pp. 68-109) to describe the dynamics of the mucus-air interface, as well as the flow in both phases. The transport of mucus induced by wall-attached cilia is also considered, via a coarse-grained boundary condition at the base of the mucus. We show that the capillary-driven Rayleigh-Plateau instability plays an important role in particle deposition by drawing the mucus into large annular humps and leaving substantial areas of the wall exposed to particles. We find, counter-intuitively, that these mucus-depleted zones enlarge on increasing the mucus volume fraction. Particles spanning a range of sizes (0.1 to 50 microns) are modelled using the Maxey-Riley equation, augmented with Brownian forces. We find a non-monotonic dependence of deposition on size. Small particles diffuse across streamlines due to Brownian motion, while large particles are thrown off streamlines by inertial forces -- particularly when air flows past mucus humps. Intermediate-sized particles are tracer-like and deposit the least. Remarkably, increasing the mucus volume need not increase entrapment: the effect depends on particle-size, because more mucus produces not only deeper humps that intercept inertial particles, but also larger depleted-zones that enable diffusive particles to deposit on the wall.

A Voxel-Wise Uncertainty-Guided Framework for Glioma Segmentation Using Spherical Projection-Based U-Net and Localized Refinement in Multi-Parametric MRI

2025-07-21T13:46:26Z

Purpose: Accurate segmentation of glioma subregions in multi-parametric MRI (MP-MRI) is essential for diagnosis and treatment planning but remains challenging due to tumor heterogeneity and ambiguous boundaries. This study proposes an uncertainty-guided hybrid framework integrating spherical projection-based 2D modeling with targeted 3D refinement to enhance segmentation accuracy and interpretability. Methods: Using the BraTS2020 dataset (369 patients, four-modality MP-MRI), three 2D U-Nets were trained to segment enhancing tumor (ET), tumor core (TC), and whole tumor (WT). Voxel-wise uncertainty was quantified via a spherical projection-based 2D nnU-Net, capturing prediction variance across deformed inputs. A 3D sliding window was used to identify high-uncertainty regions, which were refined using a dedicated 3D nnU-Net. Final outputs combined 2D and 3D predictions through a weighted fusion optimized via Particle Swarm Optimization. Results: The proposed method outperformed standalone 2D and 3D baselines, achieving Dice scores of 0.8124 (ET), 0.7499 (TC), and 0.9055 (WT), with consistent gains in sensitivity and visual coherence. Conclusion: This work presents a novel uncertainty-aware segmentation strategy that adaptively integrates 2D and 3D modeling. By focusing refinement on ambiguous regions, it improves both efficiency and accuracy, offering broad applicability to precision neuro-oncology and other high-stakes medical imaging tasks.

Continuous sPatial-Temporal Deformable Image Registration (CPT-DIR) for motion modelling in radiotherapy: beyond classic voxel-based methods

2025-07-21T13:18:53Z

Deformable image registration (DIR) is a crucial tool in radiotherapy for analyzing anatomical changes and motion patterns. Current DIR implementations rely on discrete volumetric motion representation, which often leads to compromised accuracy and uncertainty when handling significant anatomical changes and sliding boundaries. This limitation affects the reliability of subsequent contour propagation and dose accumulation procedures, particularly in regions with complex anatomical interfaces such as the lung-chest wall boundary. Given that organ motion is inherently a continuous process in both space and time, we aimed to develop a model that preserves these fundamental properties. Drawing inspiration from fluid mechanics, we propose a novel approach using implicit neural representation (INR) for continuous modeling of patient anatomical motion. This approach ensures spatial and temporal continuity while effectively unifying Eulerian and Lagrangian specifications to enable natural continuous motion modeling and frame interpolation. The integration of these specifications provides a more comprehensive understanding of anatomical deformation patterns. By leveraging the continuous representations, the CPT-DIR method significantly enhances registration and interpolation accuracy, automation, and speed. The method demonstrates superior performance in landmark and contour precision, particularly in challenging anatomical regions, representing a substantial advancement over conventional approaches in deformable image registration. The improved efficiency and accuracy of CPT-DIR make it particularly suitable for real-time adaptive radiotherapy applications.

The Bundles of Intercrossing Fibers of the Extensor Mechanism of the Fingers Greatly Influence the Transmission of Muscle Forces

2025-07-21T08:47:09Z

The extensor mechanism is a tendinous structure that plays an important role in finger function. It transmits forces from several intrinsic and extrinsic muscles to multiple bony attachments along the finger via sheets of collagen fibers. The most important attachments are located at the base of the middle and distal phalanges. How the forces from the muscles contribute to the forces at the attachment points, however, is not fully known. In addition to the well-accepted extensor medial and interosseous lateral bands of the extensor mechanism, there exist two layers of intercrossing fiber bundles (superficial interosseous medial fiber layer and deeper extensor lateral fiber layer), connecting them. In contrast to its common idealization as a minimal network of distinct strings, we built a numerical model consisting of fiber bundles to evaluate the role of multiple intercrossing fiber bundles in the production of static finger forces. We compared this more detailed model of the extensor mechanism to the idealized minimal network that only includes the extensor medial and interosseous lateral bands. We find that including bundles of intercrossing fiber bundles significantly affects force transmission, which itself depends on finger posture. We conclude that the intercrossing fiber bundles - traditionally left out in prior models since Zancolli's simplification - play an important role in force transmission and variation of the latter with posture.

Exploration and Comparison: Development and Implementation of Multiple Ultrasound Imaging Modalities

2025-07-21T00:59:11Z

Ultrasound imaging, as a noninvasive, real-time, and low-cost modality, plays a vital role in clinical diagnosis, catheterization intervention, and portable devices. With the development of transducer hardware and the continuous progress of imaging algorithms, how to realize high-quality image reconstruction in different application scenarios has become a research focus.This project focuses on the systematic research and implementation of three typical ultrasound imaging modalities - line array imaging, endoscopic imaging and plane wave imaging, covering simulation data processing, imaging algorithm implementation and real data validation, etc., aiming to deepen the understanding of the principles and processes of various types of imaging.

An Explainable Neural Radiomic Sequence Model with Spatiotemporal Continuity for Quantifying 4DCT-based Pulmonary Ventilation

2025-07-20T06:25:05Z

Accurate evaluation of regional lung ventilation is essential for the management and treatment of lung cancer patients, supporting assessments of pulmonary function, optimization of therapeutic strategies, and monitoring of treatment response. Currently, ventilation scintigraphy using nuclear medicine techniques is widely employed in clinical practice; however, it is often time-consuming, costly, and entails additional radiation exposure. In this study, we propose an explainable neural radiomic sequence model to identify regions of compromised pulmonary ventilation based on four-dimensional computed tomography (4DCT). A cohort of 45 lung cancer patients from the VAMPIRE dataset was analyzed. For each patient, lung volumes were segmented from 4DCT, and voxel-wise radiomic features (56-dimensional) were extracted across the respiratory cycle to capture local intensity and texture dynamics, forming temporal radiomic sequences. Ground truth ventilation defects were delineated voxel-wise using Galligas-PET and DTPA-SPECT. To identify compromised regions, we developed a temporal saliency-enhanced explainable long short-term memory (LSTM) network trained on the radiomic sequences. Temporal saliency maps were generated to highlight key features contributing to the model's predictions. The proposed model demonstrated robust performance, achieving average (range) Dice similarity coefficients of 0.78 (0.74-0.79) for 25 PET cases and 0.78 (0.74-0.82) for 20 SPECT cases. The temporal saliency map explained three key radiomic sequences in ventilation quantification: during lung exhalation, compromised pulmonary function region typically exhibits (1) an increasing trend of intensity and (2) a decreasing trend of homogeneity, in contrast to healthy lung tissue.

Thermal Radiosensitization Beyond Misrepair: A Mechanistic Model of Temperature-Enhanced DNA Vulnerability

2025-07-19T18:10:33Z

Objective: Hyperthermia (HT), characterized by elevated tissue temperatures above physiological levels, is a well-established radiosensitizer. When combined with radiotherapy (RT), forming thermoradiotherapy (TRT), a synergistic effect is observed across in vitro, in vivo, and clinical studies. The greatest radiosensitization occurs when HT and RT are applied simultaneously. This work aims to explore physical mechanisms -- beyond DNA repair inhibition -- that contribute to this synergy. Approach: We developed a biophysical model for the thermal enhancement ratio (TER), incorporating temperature-dependent variations in the number of vulnerable DNA sites, the DNA-ion/particle interaction cross-section, and other physicochemical parameters. These include ion production rate, diffusion processes, and medium density. The model includes misrepair effects phenomenologically, which make it consistent with other studies. Main results: The model reproduces TER values observed under simultaneous HT and RT in isolated plasmids with variable temperature. Our results indicate that, in addition to misrepair, other physical factors contribute to radiosensitization under concurrent treatment. Among these, the temperature-dependent amplification of DNA-ion/particle interaction cross-section -- driven by enhanced DNA thermal fluctuations structure -- emerges as the second most influential factor. Significance: These findings suggest that thermal radiosensitization arises not only from impaired repair, but also from increased physical vulnerability of the DNA. The model provides mechanistic insight for optimizing TRT parameters.

Analyzing Blood Glucose Levels with Near Infra-Red Spectroscopy and Chemometric Multivariate Methods

2025-07-19T09:38:30Z

In this work, the blood NIR absorbances are recorded using the FT-IR method. It is shown that when the absorbance curves are multiplied by the first derivative of the water absorbance spectrum as well as by the first derivative of the glucose absorbance, the peaks related to the water interferent in the blood are effectively removed from the blood absorbance spectra, allowing for better distinction of the peaks of the blood glucose. The PCR prediction using this method shows smaller errors compared to the PCR employing the net absorbances, while the number of derived principal components is smaller in the PCR method based on the derivatives than the one based on the net absorbances. Additionally, the prediction of blood glucose levels using a linear regression model based on the molar absorptivity of glucose also demonstrates acceptable accuracy.