Prediction of Local Failure after Stereotactic Radiotherapy in Melanoma Brain Metastases Using Ensemble Learning on Clinical, Dosimetric, and Radiomic Data

2025-08-28T09:34:20Z

Background: This study aimed to predict lesion-specific outcomes after stereotactic radiotherapy (SRT) in patients with brain metastases from malignant melanoma (MBM), using clinical, dosimetric, and pretherapeutic MRI data. Methods: In this multicenter retrospective study, 517 MBM from 130 patients treated with single-fraction or hypofractionated SRT at three centers were analyzed. From contrast-enhanced T1-weighted MRI, 1576 radiomic features (RF) were extracted per lesion - 788 from the gross tumor volume (GTV) and 788 from a 3 mm peritumoral margin. Clinical, dosimetric and RF data from one center were used for feature selection and model development via nested cross-validation employing an ensemble learning approach; external validation used data from the other two centers. Results: Local failure occurred in 72/517 lesions (13.9%). Predictive models based on clinical data, RF, or a combination of both achieved c-indices of 0.60 +/- 0.15, 0.65 +/- 0.11, and 0.65 +/- 0.12, respectively. RF-based models outperformed the clinical models; dosimetric data alone were not predictive. Most predictive RF originated from the peritumoral margin (92%) versus GTV (76%). On the first external dataset, all models performed similarly (c-index: 0.60-0.63), but generalization was poor on the second (c-index < 0.50), likely due to differences in patient characteristics and imaging protocols. Conclusions: Pretherapeutic MRI features, particularly from the peritumoral region, show promise for predicting lesion-specific outcomes in MBM after SRT. Their consistent contribution suggests biologically relevant information that may support individualized treatment planning. Combined with clinical data, these markers offer prognostic insight, though generalizability remains limited by data heterogeneity.

Matrixed-Spectrum Decomposition Accelerated Linear Boltzmann Transport Equation Solver for Fast Scatter Correction in Multi-Spectral CT

2025-08-28T08:05:42Z

X-ray scatter has been a serious concern in computed tomography (CT), leading to image artifacts and distortion of CT values. The linear Boltzmann transport equation (LBTE) is recognized as a fast and accurate approach for scatter estimation. However, for multi-spectral CT, it is cumbersome to compute multiple scattering components for different spectra separately when applying LBTE-based scatter correction. In this work, we propose a Matrixed-Spectrum Decomposition accelerated LBTE solver (MSD-LBTE) that can be used to compute X-ray scatter distributions from CT acquisitions at two or more different spectra simultaneously, in a unified framework with no sacrifice in accuracy and nearly no increase in computation in theory. First, a matrixed-spectrum solver of LBTE is obtained by introducing an additional label dimension to expand the phase space. Then, we propose a ``spectrum basis'' for LBTE and a principle of selection of basis using the QR decomposition, along with the above solver to construct the MSD-LBTE. Based on MSD-LBTE, a unified scatter correction method can be established for multi-spectral CT. We validate the effectiveness and accuracy of our method by comparing it with the Monte Carlo method, including the computational time. We also evaluate the scatter correction performance using two different phantoms for fast-kV switching based dual-energy CT, and using an elliptical phantom in a numerical simulation for kV-modulation enabled CT scans, validating that our proposed method can significantly reduce the computational cost at multiple spectra and effectively reduce scatter artifact in reconstructed CT images.

Unraveling the Redox Mechanisms Underlying FLASH Radiotherapy: Critical Dose Thresholds and NRF2-Driven Tissue Sparing

2025-08-28T07:51:21Z

FLASH radiotherapy (FLASH-RT) achieves tumor control comparable to conventional dose-rate irradiation (CONV-RT) while significantly reducing radiation damage to normal tissues. However, the physical conditions triggering the FLASH sparing effect remain unclear, and mechanisms related to oxidative stress and redox regulation are poorly understood. This study utilizes a murine acute intestinal toxicity model to investigate how beam parameters influence the FLASH sparing effect and tumor control using innovative FLASH-RT and CONV-RT combined irradiation. Results demonstrate for the first time that a substantially reduced FLASH dose can still elicit sparing effect, provided a total dose threshold is met. Kinetic simulation and experimental validation demonstrate that FLASH-RT enhances peroxyl radical recombination, reducing reactive oxygen species (ROS) and malondialdehyde levels. Antioxidant interventions further confirm the essential role of free radicals. RNA sequencing and molecular analyses reveal that FLASH-RT activates the nuclear factor E2-related factor 2 (NRF2) antioxidant pathway while suppressing extracellular signal-regulated kinases (ERK) signaling, thereby enhancing cellular redox defenses, reducing apoptosis, and mitigating ROS-mediated tissue injury. These findings highlight the feasibility of optimizing the FLASH-RT therapeutic window through redox modulation and provide a foundation for developing free radical-targeted strategies to improve its therapeutic efficacy.

Ultrasound Autofocusing: Common Midpoint Phase Error Optimization via Differentiable Beamforming

2025-08-28T05:16:22Z

In ultrasound imaging, propagation of an acoustic wavefront through heterogeneous media causes phase aberrations that degrade the coherence of the reflected wavefront, leading to reduced image resolution and contrast. Adaptive imaging techniques attempt to correct this phase aberration and restore coherence, leading to improved focusing of the image. We propose an autofocusing paradigm for aberration correction in ultrasound imaging by fitting an acoustic velocity field to pressure measurements, via optimization of the common midpoint phase error (CMPE), using a straight-ray wave propagation model for beamforming in diffusely scattering media. We show that CMPE induced by heterogeneous acoustic velocity is a robust measure of phase aberration that can be used for acoustic autofocusing. CMPE is optimized iteratively using a differentiable beamforming approach to simultaneously improve the image focus while estimating the acoustic velocity field of the interrogated medium. The approach relies solely on wavefield measurements using a straight-ray integral solution of the two-way time-of-flight without explicit numerical time-stepping models of wave propagation. We demonstrate method performance through in silico simulations, in vitro phantom measurements, and in vivo mammalian models, showing practical applications in distributed aberration quantification, correction, and velocity estimation for medical ultrasound autofocusing.

Application of Quantum Convolutional Neural Networks for MRI-Based Brain Tumor Detection and Classification

2025-08-28T01:14:34Z

This study explores the application of Quantum Convolutional Neural Networks (QCNNs) for brain tumor classification using MRI images, leveraging quantum computing for enhanced computational efficiency. A dataset of 3,264 MRI images, including glioma, meningioma, pituitary tumors, and non-tumor cases, was utilized. The data was split into 80% training and 20% testing, with an oversampling technique applied to address class imbalance. The QCNN model consists of quantum convolution layers, flatten layers, and dense layers, with a filter size of 2, depth of 4, and 4 qubits, trained over 10 epochs. Two models were developed: a binary classification model distinguishing tumor presence and a multiclass classification model categorizing tumor types. The binary model achieved 88% accuracy, improving to 89% after data balancing, while the multiclass model achieved 52% accuracy, increasing to 62% after oversampling. Despite strong binary classification performance, the multiclass model faced challenges due to dataset complexity and quantum circuit limitations. These findings suggest that QCNNs hold promise for medical imaging applications, particularly in binary classification. However, further refinements, including optimized quantum circuit architectures and hybrid classical-quantum approaches, are necessary to enhance multiclass classification accuracy and improve QCNN applicability in clinical settings.

Mitigating MRI Domain Shift in Sex Classification: A Deep Learning Approach with ComBat Harmonization

2025-08-27T22:14:59Z

Deep learning models for medical image analysis often suffer from performance degradation when applied to data from different scanners or protocols, a phenomenon known as domain shift. This study investigates this challenge in the context of sex classification from 3D T1-weighted brain magnetic resonance imaging (MRI) scans using the IXI and OASIS3 datasets. While models achieved high within-domain accuracy (around 0.95) when trained and tested on a single dataset (IXI or OASIS3), we demonstrate a significant performance drop to chance level (about 0.50) when models trained on one dataset are tested on the other, highlighting the presence of a strong domain shift. To address this, we employed the ComBat harmonization technique to align the feature distributions of the two datasets. We evaluated three state-of-the-art 3D deep learning architectures (3D ResNet18, 3D DenseNet, and 3D EfficientNet) across multiple training strategies. Our results show that ComBat harmonization effectively reduces the domain shift, leading to a substantial improvement in cross-domain classification performance. For instance, the cross-domain balanced accuracy of our best model (ResNet18 3D with Attention) improved from approximately 0.50 (chance level) to 0.61 after harmonization. t-SNE visualization of extracted features provides clear qualitative evidence of the reduced domain discrepancy post-harmonization. This work underscores the critical importance of domain adaptation techniques for building robust and generalizable neuroimaging AI models.

Physically-Based Inverse Rendering Framework for PET Image Reconstruction

2025-08-27T15:10:28Z

Differentiable rendering has been widely adopted in computer graphics as a powerful approach to inverse problems, enabling efficient gradient-based optimization by differentiating the image formation process with respect to millions of scene parameters. Inspired by this paradigm, we propose a physically-based inverse rendering (IR) framework, the first ever platform for PET image reconstruction using Dr.Jit, for PET image reconstruction. Our method integrates Monte Carlo sampling with an analytical projector in the forward rendering process to accurately model photon transport and physical process in the PET system. The emission image is iteratively optimized using voxel-wise gradients obtained via automatic differentiation, eliminating the need for manually derived update equations. The proposed framework was evaluated using both phantom studies and clinical brain PET data acquired from a Siemens Biograph mCT scanner. Implementing the Maximum Likelihood Expectation Maximization (MLEM) algorithm across both the CASToR toolkit and our IR framework, the IR reconstruction achieved a higher signal-to-noise ratio (SNR) and improved image quality compared to CASToR reconstructions. In clinical evaluation compared with the Siemens Biograph mCT platform, the IR reconstruction yielded higher hippocampal standardized uptake value ratios (SUVR) and gray-to-white matter ratios (GWR), indicating enhanced tissue contrast and the potential for more accurate tau localization and Braak staging in Alzheimer's disease assessment. The proposed IR framework offers a physically interpretable and extensible platform for high-fidelity PET image reconstruction, demonstrating strong performance in both phantom and real-world scenarios.

Rapid Lung MRI at 3T in ILD Patients: A Feasibility Study

2025-08-27T15:05:32Z

This study aimed to assess the diagnostic utility of a conventional FLASH technique at 3T MRI in the detection of ILD patients in combination with functional and morphological information by a rather simple but straightforward approach for SNR improvement by simple averaging and to compare it with the current imaging gold standard, CT.

Reimagining Image Segmentation using Active Contour: From Chan Vese Algorithm into a Proposal Novel Functional Loss Framework

2025-08-27T15:01:11Z

In this paper, we present a comprehensive study and analysis of the Chan-Vese algorithm for image segmentation. We employ a discretized scheme derived from the empirical study of the Chan-Vese model's functional energy and its partial differential equation based on its level set function. We provide a proof of the results and an implementation using MATLAB. Leveraging modern computer vision methodologies, we propose a functional segmentation loss based on active contours, utilizing pytorch.nn.ModuleLoss and a level set based on the Chan-Vese algorithm. We compare our results with common computer vision segmentation datasets and evaluate the performance of classical loss functions against our proposed method. All code and materials used are available at https://github.com/gguzzy/chan_vese_functional_loss.

4D-Printing Assisted Scaffolds to Form Cardiac Bricks

2025-08-27T13:11:59Z

Myocardial infarction causes myocardium thinning, fibrosis, and progressive heart failure. Engineered human myocardium (EHM) is tested clinically as a first-in-class product for sustainable remuscularization in patients with advanced heart failure. Current EHM production procedure from iPSC-derived cardiomyocytes and stromal cells, is time consuming and involves thin constructs. Here, I introduce 4D-DLP-printed foldable scaffolds with potential to create modular cylindrical cardiac bricks. This enables self-assembly into thicker and aligned sarcomeres with synchronous contractility mimicking a native myocardium. When optimized and integrated with cryopreservation protocols, the biomanufacturing and biobanking of these cellular building blocks may overcome current EHM limitations and advance translational regenerative therapies for myocardial infarction. The structure-material properties investigations into these new class of life building blocks paves the way for future medical breakthroughs.

Personalized MR-Informed Diffusion Models for 3D PET Image Reconstruction

2025-08-27T10:57:02Z

Recent work has shown improved lesion detectability and flexibility to reconstruction hyperparameters (e.g. scanner geometry or dose level) when PET images are reconstructed by leveraging pre-trained diffusion models. Such methods train a diffusion model (without sinogram data) on high-quality, but still noisy, PET images. In this work, we propose a simple method for generating subject-specific PET images from a dataset of multi-subject PET-MR scans, synthesizing "pseudo-PET" images by transforming between different patients' anatomy using image registration. The images we synthesize retain information from the subject's MR scan, leading to higher resolution and the retention of anatomical features compared to the original set of PET images. With simulated and real [$^{18}$F]FDG datasets, we show that pre-training a personalized diffusion model with subject-specific "pseudo-PET" images improves reconstruction accuracy with low-count data. In particular, the method shows promise in combining information from a guidance MR scan without overly imposing anatomical features, demonstrating an improved trade-off between reconstructing PET-unique image features versus features present in both PET and MR. We believe this approach for generating and utilizing synthetic data has further applications to medical imaging tasks, particularly because patient-specific PET images can be generated without resorting to generative deep learning or large training datasets.

Functionally-graded drug delivery systems with binding reactions: analytical and stochastic approaches for the fraction of drug released

2025-08-27T01:51:03Z

Mathematical modelling and computer simulation are increasingly being used alongside experiments to help optimise and guide the design of drug delivery systems. Recent drug delivery research has (i) highlighted the advantages of drug delivery systems constructed using functionally graded materials to achieve target release rates and desired dosage levels over time; and (ii) revealed how it is possible for drug to bind to the carrier material and become irreversibly immobilised within the system, reducing the amount of drug delivered. In this paper, we consider the effect of functionally graded materials and binding reactions on drug release from common slab, cylinder and sphere devices. In particular, two key contributions are presented. First, we outline a deterministic-continuum approach that develops exact analytical expressions for calculating the total fraction of drug released from the device based on a partial differential equation model of the release process. Second, we develop a stochastic-discrete approach for calculating the fraction of drug released over time based on a random-walk model that captures the randomness of the release process and resulting variability in the total fraction of drug released. Both approaches are numerically validated and provide tools for exploring how the fraction of drug released depends on system parameters (e.g. diffusivity and reaction rate functions induced by the functionally graded material and binding reactions), insight which may be useful for designers of drug delivery systems.

Cerebral blood flow monitoring using a deep learning implementation of the two-layer DCS analytical model with a 512x512 SPAD array

2025-08-26T09:43:08Z

Diffuse correlation spectroscopy (DCS) analyzes the autocorrelation function of photons scattered by red blood cells, enabling non-invasive, continuous measurement of deep tissue blood flow at the bedside. Multi-layer DCS models (two- and three-layer) enhance cerebral blood flow index (CBFi) sensitivity and mitigate interference from extracerebral tissues. However, these models require multiple predefined parameters and are computationally intensive, making them impractical for real-time bedside monitoring. To address this challenge, we integrate a single-photon avalanche diode (SPAD) array with a deep learning (DL)-based approach trained on data generated by the two-layer analytical model. This method bypasses traditional model fitting, enabling real-time CBFi monitoring while minimizing superficial tissue contamination. We first validate our approach using Monte Carlo-simulated test datasets, demonstrating superior accuracy in relative CBFi estimation (5.8% error vs. 19.1% for conventional fitting) and enhanced CBFi sensitivity (87.1% vs. 55.4%). Additionally, our method effectively isolates shallow blood flow changes and 750-fold faster than single-exponential fitting in a realistic scenario. We further evaluate the system in a healthy adult, achieving real-time CBFi monitoring and pulsatile waveform recovery during a brain activity test using a 512 512 SPAD array sensor. These results highlight the potential of our approach for real-time brain activity monitoring.

Decoding Gray Matter: large-scale analysis of brain cell morphometry to inform microstructural modeling of diffusion MR signals

2025-08-25T20:19:44Z

The structure of grey matter has long been a key focus in neuroscience, as cell morphology varies by type and can be affected by neurological conditions. Understanding these variations is essential for studying brain function and disease. Diffusion-weighted MRI (dMRI) is a powerful non-invasive tool for examining cellular microstructure in vivo. However, for dMRI to accurately reflect cellular features, it is crucial to determine which aspects of morphology influence its measurements. Proper interpretation of dMRI data depends on understanding its sensitivity to different cellular characteristics. Despite growing interest in cellular morphology, there has been no systematic report on the key features defining different neural cell types. To address this, we analyzed over 11,500 three-dimensional cellular reconstructions across three species and nine cell types, establishing reference values for critical morphological traits. These traits fall into three categories: structural features that define the cell's skeletal framework, shape features that describe spatial organization, and topological features that break down cellular structure to distinguish cell types. Beyond reporting these reference values, we examine their relevance for dMRI, identifying which neural features dMRI can detect and which cell types may be distinguishable. To complement the statistical analysis, we also provide high resolution 3D surface meshes representative of each cell type and species. This work provides essential benchmarks for grey matter research, offering new guidelines on linking neuroimaging measurements to neurobiology. These reference values will be a valuable resource for neuroscientists and neuroimaging researchers, aiding in the interpretation of imaging data and the refinement of brain tissue models.

Objective Task-based Evaluation of Quantitative Medical Imaging Methods: Emerging Frameworks and Future Directions

2025-08-25T20:18:26Z

Quantitative imaging (QI) is demonstrating strong promise across multiple clinical applications. For clinical translation of QI methods, objective evaluation on clinically relevant tasks is essential. To address this need, multiple evaluation strategies are being developed. In this paper, based on previous literature, we outline four emerging frameworks to perform evaluation studies of QI methods. We first discuss the use of virtual imaging trials (VITs) to evaluate QI methods. Next, we outline a no-gold-standard evaluation framework to clinically evaluate QI methods without ground truth. Third, a framework to evaluate QI methods for joint detection and quantification tasks is outlined. Finally, we outline a framework to evaluate QI methods that output multi-dimensional parameters, such as radiomic features. We review these frameworks, discussing their utilities and limitations. Further, we examine future research areas in evaluation of QI methods. Given the recent advancements in PET, including long axial field-of-view scanners and the development of artificial-intelligence algorithms, we present these frameworks in the context of PET.