Trading robustness: a scenario-free approach to robust Multi-Criteria Optimization for Treatment Planning

2026-03-26T17:53:48Z

Treatment planning in radiotherapy is inherently a multi-criteria optimization (MCO) problem. Traditionally, the treatment's robustness is not formulated as a part of this decision making problem, but dealt with separately through margins or robust optimization. This work facilitates integration of robustness into multi-criteria optimization using a recently proposed efficient scenario-free (s-f) robust optimization approach: The s-f approach relies on the fast evaluation of the expected dose distribution and mean variance during optimization. This is achieved by precomputation of probabilistic quantities, which can then be used for repeated solving of subproblems in the two explored MCO approaches: Lexicographic Ordering (LO) and Pareto Front (PF) approximation. Different prioritization strategies within the LO approach are used to assess the impact of variance reduction while a 3-objective PF approximation, including a variance reduction objective, is generated to visualize and analyze trade-offs between the competing objectives. The robust optimization is performed including 100 scenarios modeling setup and range errors, as well as organ motion, on 3D- and 4DCT lung cancer patient datasets. Robustness analysis is performed to assess and explore the efficacy of all optimization strategies. The s-f approach enabled robust optimization in MCO with computational times comparable to nominal MCO. Both MCO strategies highlighted the interplay between dosimetric and variance reduction objectives. The LO approach showed how prioritization affects plan quality and robustness, while the PF analysis revealed a clear trade-off between robustness and organ-at-risk sparing. The reported analysis highlighted the conflicting trade-off nature of plan robustness and dosimetric quality, demonstrating how robust MCO supports a more informed and flexible decision-making process in treatment planning.

Trans-stenotic pressure gradient estimation using a modified Bernoulli equation

2026-03-26T14:57:07Z

Accurate non-invasive estimation of trans-stenotic pressure gradients remains a challenge. In clinical practice, pressure gradients are often estimated from velocity measurements using Bernoulli-based formulas, but these simplified relations do not explicitly account for how pressure losses change with the flow regime. Here, we introduce a modified Bernoulli (MB) formulation that incorporates regime-dependent pressure losses through a Reynolds-number-dependent loss coefficient. Steady in-vitro experiments were performed in an idealized stenosis model over physiologically relevant flow rates (0.65-3.9 L/min), combining direct pressure measurements with ultrasound imaging velocimetry and phase-contrast magnetic resonance imaging (PC-MRI) to measure velocities. The MB model was calibrated from the measured pressure drops and then evaluated against the simplified Bernoulli (SB) and extended Bernoulli (EB) formulations. Over the tested flow regime, MB agreed best with the measurements. SB and EB showed larger biases, with errors of roughly 10-55% (SB) and -15 to 25% (EB), and overestimated the pressure drop in the clinically relevant range. We additionally quantified the effect of PC-MRI in-plane pixel size on MRI-based pressure estimates. Coarse sampling of the stenosis throat led to systematic underestimation of flow rate and bulk velocity and, consequently, of the MB-predicted pressure drop. In contrast, the peak throat velocity was substantially less sensitive to pixel size, resulting in smaller estimation errors when used as input for the MB. Overall, the results demonstrate that accounting for flow-regime-dependent loss mechanisms enhances pressure drop estimation, and that sufficient sampling of the stenotic throat is crucial for MRI-based flow rate and pressure drop estimation. In addition, peak-velocity-based MB pressure drop estimations are less sensitive to pixel size.

Plasmonic Mediated Atomically Engineered 2D Aluminium Quasicrystals for Dopamine Biosensing

2026-03-26T13:12:28Z

Dopamine levels are linked to neurological illnesses like Parkinson's and Alzheimer's. Thus, reliable and sensitive detection of dopamine is crucial for early diagnosis and surveillance of neurodegenerative diseases. Non-noble-metal-based nanomaterials are ideal for light-mediated sensing of organic molecules. Among these, 2D quasicrystal structures consisting of five elements, namely Al70Co10Fe5Ni10Cu5, provide active sites due to their high surface-to-volume ratio, making them excellent for organic chemical sensing. Here, we propose a simple, label-free, spatial self-phase-modulation (SSPM)-based sensing method in liquid form. SSPM-based time evolution of the diffraction pattern for varied mixing levels of a 1100 ppb dopamine solution shows a shift in the active 2D Al QC solution. The 1100 ppb solution shows a distinct value, indicating a change in the nonlinear refractive index. Time-evolution analysis is used to calculate sensitivities to changes in the nonlinear refractive index and time constant. The SPR-activated 2D Al QC nanostructure is used to demonstrate dopamine sensing and to perform qualitative and quantitative evaluations. The SSPM-based sensing has been further compared with other optical-based sensing methods such as Raman spectroscopy, UV-Vis spectroscopy, and FTIR spectroscopy. The experimental observations are also explained using DFT-based simulations. The current SSPM method can be used for rapid, large-scale medical diagnostics.

Recent application studies of an INTPIX4NA SOIPIX detector-based X-ray camera using an SiTCP-XG 10GbE-based high-speed readout system at KEK facilities

2026-03-26T07:27:47Z

The Silicon-On-Insulator PIXel (SOIPIX) detector is a unique monolithic structure imaging device currently being by the SOIPIX group, led by the High Energy Accelerator Research Organization (KEK). Our detector team at the KEK Photon Factory (PF) has developed an X-ray camera based on the INTPIX4NA SOIPIX detector. This detector provides a sensitive area of 14.1 $\times$ 8.7 $\mathrm{mm^2}$, with 425,984 pixels arranged in an 832-column $\times$ 512-row matrix and a pixel size of 17 $\times$ 17 $\mathrm{μm^{2}}$, and offers high spatial resolution and excellent sensitivity under low intensity X ray conditions. The readout system used in the X-ray camera is developed at the PF. It is equipped with SiTCP-XG, a 10 Gb Ethernet network controller implemented on a field-programmable gate array, enabling high-frame-rate imaging at several hundred hertz. We are currently investigating the applicability of this X-ray camera in several experiments at KEK. Herein, we report three recent application studies: (1) application to the optics of an X-ray zooming microscope using two Fresnel zone plates at PF AR-NE1A; (2) application to a phase-contrast X-ray imaging system using a two-crystal X-ray interferometer at the PF BL-14C beamline; and (3) application to nondestructive detection of lithium in Li-ion battery electrode materials using muonic X-rays at J-PARC MLF Muon D2.

Robust Multicenter CT Radiogenomics for Dual EGFR and KRAS Prediction in Lung Cancer with Stability-Aware Modeling and SHAP Interpretation

2026-03-26T01:23:14Z

Accurate identification of EGFR and KRAS mutations is essential for precision therapy in non-small cell lung cancer (NSCLC), but tissue genotyping is invasive and may not capture tumor heterogeneity. CT-based radiogenomics offers a noninvasive alternative, although generalization across centers remains challenging. We benchmarked handcrafted radiomics features (HRF), deep feature representations (DFR), and their fusion for three-class mutation prediction (wild-type, KRAS-mutant, and EGFR-mutant) with external testing. We curated 1,023 thoracic CT scans from 12 public datasets across more than 20 centers, including 136 patients with EGFR/KRAS labels. IBSI-compliant HRFs were extracted with standardized preprocessing, and DFRs were derived using PySERA. HRF-only, DFR-only, and fused HRF+DFR pipelines were evaluated using five-fold cross-validation and external testing. A semi-supervised pseudo-labeling strategy leveraged unlabeled CT scans, and SHAP supported interpretability. In external testing, HRF-based models generalized best, achieving AUC 0.77 +/- 0.07 and accuracy 0.77 +/- 0.00. DFR-based models showed a larger drop from cross-validation to external testing, with best external AUC around 0.57 +/- 0.05. Fusion improved robustness over DFR-only models but did not consistently outperform HRFs. SHAP identified morphology- and heterogeneity-related radiomic phenotypes as key predictors. Standardized handcrafted radiomics within a multicenter semi-supervised framework may provide a generalizable and interpretable approach for CT-based EGFR/KRAS stratification.

Quantitative Chemical Exchange Saturation Transfer Imaging with Golden-Angle Radial k-Space and Locally Low-Rank Reconstruction

2026-03-26T00:11:06Z

Purpose: To develop a motion-robust and geometrically-accurate quantitative CEST approach using radial k-space sampling, locally low-rank reconstruction and neural network quantification. Methods: The acquisition schedule was generated via deep learning optimization. The optimized sequence accuracy was validated in numerical simulations in digital phantoms. The spokes per measurement count was optimized using simulations and in vivo ablation studies in a healthy subject. Five healthy subjects were repeatedly scanned, and regions of interest were defined. Tissue maps from the proposed sequence were compared to an EPI-based quantitative CEST sequence. Motion sensitivity and test-retest reproducibility was assessed using the coefficient of variation (CV) and intraclass-correlation coefficient (ICC). Results: 3D quantitative CEST maps were acquired in 11 minutes using 34 spokes per measurement. Numerical simulations showed a mean error of <14% for all tissue parameters. In vivo tissue-parameter values agreed well with prior CEST-MRF studies in brain. The mean ICC over all tissue maps was 0.92 in white matter (WM) and 0.87 in grey matter (GM). The mean inter-subject CV was 5.4%/3.4% (WM/GM) and the motion vs. no-motion error was 265% for EPI but 8.6% for the radial acquisition. Conclusion: A motion-robust and geometrically accurate quantitative radial CEST pulse sequence and reconstruction framework is demonstrated. This approach enables accurate, reproducible 3D brain quantitative CEST imaging in clinically relevant scan times.

Robust synchrotron-based deep learning algorithm for intracochlear segmentation in clinical scans: development and international validation

2026-03-25T16:17:00Z

Clinical imaging is routinely used for cochlear implant surgical planning yet lacks the resolution and contrast necessary to visualize the fine intracochlear structures critical for individualized intervention. To address this limitation, an ensemble deep learning model was developed to automatically segment cochlear micro-anatomy from standard clinical scans. The model was trained and validated using an independent internal dataset comprised of paired synchrotron and clinical scans of the same cochlea across various acquisition protocols. Performance was evaluated quantitatively on an unseen internal test dataset and a multi-institutional external test dataset. The deep learning model achieved accurate segmentation of intracochlear anatomy across all tested modalities, outperformed all previously published models, and demonstrated strong viability on the multi-institutional external dataset. Furthermore, anatomical measurements on the automatic segmentations closely matched those obtained from high-resolution ground truth segmentations, confirming reliable estimation of clinically relevant metrics. By bridging the gap between high-resolution imaging and routine clinical imaging, this work provides a practical solution for patient-specific cochlear implant surgical planning and postoperative assessment, advancing the goals of atraumatic insertions and more effective hearing restoration.

Reconstructing effective ultrasound transducer models via distributed source inversion

2026-03-25T15:29:21Z

Accurate modeling of ultrasound wave propagation is essential for high-fidelity simulation and imaging in ultrasonic testing. A primary challenge lies in characterizing the excitation source, particularly for transducers with large apertures relative to the acoustic wavelengths. In such cases, non-uniform excitation and spatial interference significantly affect the resulting radiation patterns. This paper proposes a distributed source inversion strategy to reconstruct an effective spatio-temporal transducer model that reproduces experimentally measured wavefields. The reconstructed source model captures aperture-dependent phase and amplitude variations without the need for detailed knowledge of the transducer structure. The approach is validated using directivity measurements on an aluminum half-cylinder, where simulations incorporating the reconstructed source model show close agreement with experimental directivity patterns and waveform shapes. Finally, synthetic studies on reverse time migration and full-waveform inversion demonstrate that accurate transducer modeling is critical for the success of simulation-based imaging and inversion workflows and significantly improves reconstruction quality.

Accelerating Low-Frequency Convergence for Limited-Angle DBT via Two-Channel Fidelity in PDHG

2026-03-25T05:30:56Z

Reconstruction in limited-angle digital breast tomosynthesis (DBT) suffers from slow convergence of low spatial-frequency components when using weighted data-fidelity terms within primal-dual optimization. We introduce a two-channel fidelity strategy that decomposes the sinogram residual into complementary low-pass and high-pass bands using square-root Hanning (Hann^{1/2}) filter families, each driven by an independent \ell_2-ball constraint and dual update in the PDHG (Chambolle-Pock) algorithm with He-Yuan predictor-corrector relaxation. By assigning a larger dual step size and slightly looser tolerance to the low-frequency channel, the method delivers stronger per-iteration correction to the near-DC band without violating global PDHG stability. Experiments on a 2D digital breast phantom across multiple resolutions demonstrate that the two-channel approach yields 19%--61% RMSE improvement over the single-channel baseline, with larger gains at coarser discretizations where problem conditioning is more favorable, supporting more balanced spectral convergence in clinically realistic limited-angle regimes.

Linear Acceleration Is a Primary Risk Factor for Concussion and a Target for Prevention

2026-03-24T23:05:31Z

Head impacts can cause concussion, but the precise biomechanical conditions that produce injury remain uncertain. Rotational acceleration has long been posited as the primary cause and has guided concussion prevention strategies. Using instrumented mouthguards to record head kinematics of diagnosed concussions, we directly tested this hypothesis and found that linear acceleration predicted injury with greater precision than rotational acceleration, while rotational velocity provided additional predictive value. Injury risk functions derived from these measurements indicated substantial predicted concussion risk during typical impacts to an American football helmet. Introducing a liquid-filled helmet pad designed to attenuate linear acceleration reduced predicted risk by up to 52%. These results indicate that effective concussion prevention requires targeting linear acceleration.

Spatial Sampling of Hemispherical Arrays for Three-Dimensional Photoacoustic Computed Tomography

2026-03-24T21:24:37Z

Three-dimensional (3D) photoacoustic computed tomography (PACT) is a powerful noninvasive biomedical imaging modality that provides volumetric data for structural and functional assessment \textit{in vivo}. To maximize angular coverage and mitigate limited-view artifacts, modern 3D PACT systems frequently employ hemispherical transducer arrays. While substantial effort has been devoted to improving image quality through post-processing algorithms, the intrinsic impact of the hardware array layout on the baseline image quality remains underexplored. In this study, we systematically investigate how the spatial sampling characteristics of hemispherical array distributions affect imaging performance under fixed hardware constraints. We propose a uniform-spacing sampling criterion to generate three representative array distributions and evaluate their performance using quantitative metrics across static, noise-perturbed, reduced-element, and rotational acquisition scenarios. Across these diverse testing regimes, the Fibonacci distribution consistently demonstrates superior structural robustness and more globally balanced reconstruction quality, a result we attribute to its highly isotropic sampling properties. These findings demonstrate that an optimal hardware-level sampling strategy is critical for maintaining global reconstruction stability. Ultimately, this framework establishes a rigorous quantitative methodology for benchmarking hemispherical array distributions and provides practical design guidance for the future development of 3D PACT systems.

Exact analytical PGSE signal for diffusion confined to a cylindrical surface using a spectral Laplacian formalism

2026-03-24T16:54:17Z

Pulsed-gradient spin-echo (PGSE) MRI experiments probe molecular self-diffusion through spin phase accumulation under time-dependent magnetic field gradients. For diffusion confined to cylindrical surfaces, existing analytical signal models typically rely on the narrow-pulse limit, approximate treatments of finite gradient durations, or the Gaussian phase approximation, which become increasingly inaccurate at high diffusion weightings. Here, we derive an exact analytical solution of the Bloch-Torrey equation for diffusion confined to a cylindrical surface under finite PGSE gradients and obtain the corresponding diffusion MRI signal expression valid for arbitrary gradient durations and separations. The derivation is based on a spectral matrix formalism of the Laplace operator in the eigenbasis of the confining geometry. The signal is expressed as a product of non-commuting matrix exponentials, without approximations to the diffusion propagator or the spin phase distribution. We further introduce a reduced real spectral basis exploiting the symmetry of the cylindrical surface, substantially improving computational efficiency. Building on this exact formulation, we develop efficient numerical strategies for repeated signal evaluations, including a Strang splitting approximation of the matrix exponentials and an efficient computation of the spherical mean signal using Gauss-Legendre quadrature. The analytical signal is validated against Monte Carlo simulations over a wide range of cylinder radii and experimental parameters. The accelerated implementations are benchmarked against the exact formulation to quantify accuracy-runtime trade-offs. These results establish a computationally efficient framework for evaluating directional and orientationally averaged diffusion MRI signals in applications requiring large numbers of model evaluations.

Deep Learning Estimation of Absorbed Dose for Nuclear Medicine Diagnostics

2026-03-24T09:09:07Z

The distribution of absorbed dose in radionuclide therapy with Lu$^{177}$ can be approximated by convolving an image of the time-integrated activity distribution with a dose voxel kernel representing different tissue types. This fast but inaccurate approximation is unsuitable for personalised dosimetry because it neglects tissue heterogeneity. Such heterogeneity can be incorporated by combining imaging modalities such as computed tomography and single-photon emission computed tomography with computationally expensive Monte Carlo simulation. The aim of this study is to estimate, for the first time, dose voxel kernels from density kernels derived from computed-tomography data by means of deep learning using convolutional neural networks. On a test set of real patient data, the proposed architecture achieved an intersection-over-union score of $0.86$ after $308$ epochs and a corresponding mean squared error of $1.24\times 10^{-4}$. This generalisation performance shows that the trained convolutional network is indeed capable of learning the map from density kernels to dose voxel kernels. Future work will evaluate dose voxel kernels estimated by neural networks against Monte Carlo simulations of whole-body computed tomography in order to predict patient-specific voxel dose maps.

A Clinically Anchored Radiomics Dictionary for Explainable TI-RADS-Based Thyroid Nodule Classification in Ultrasound; Dictionary Version TU1.0

2026-03-24T01:31:21Z

Artificial intelligence based radiomics models for thyroid ultrasound (US) often achieve strong diagnostic performance but remain difficult to interpret, limiting clinical trust and adoption. We developed and validated an interpretable radiomic feature (RF) framework for thyroid nodule classification by linking quantitative US features to the Thyroid Imaging Reporting and Data System (TI-RADS) semantic lexicon through a clinically grounded radiomics dictionary. The dictionary mapped TI-RADS categories, including composition, echogenicity, shape, margin, and echogenic foci, to Image Biomarker Standardization Initiative compliant RFs extracted from two-dimensional US images. Relationships were defined through expert consensus and examined using Shapley Additive Explanations (SHAP). Three multicenter datasets were combined, yielding 5,542 nodules. A total of 107 RFs were extracted using PyRadiomics and normalized with min-max scaling. For benign versus malignant classification, 27 feature selection methods were paired with 25 classifiers and evaluated using stratified five-fold cross-validation on 70% of the data, followed by testing on the remaining 30%. Robust model selection used a stability-aware composite score combining mean performance and variability across balanced accuracy, precision, recall, F1-score, and ROC-AUC. The proposed dictionary enabled direct interpretation of radiomic signatures in TI-RADS terms. The best model, Select-From-Model based on logistic regression with Extra-Trees, achieved a test ROC-AUC of 0.941 +/- 0.005. SHAP analysis showed that texture heterogeneity was the dominant malignancy signal, with gray level run length matrix non-uniformity, intensity dispersion, and kurtosis aligning with high-risk TI-RADS descriptors. These findings support transparent and clinically meaningful thyroid nodule risk stratification from US.

Towards Routine AI-Based PET/CT and SPECT/CT Lesion Segmentation and Tracking in PSMA Theranostics

2026-03-24T00:37:54Z

Quantitative molecular imaging is central to treatment response assessment in oncology, yet clinical practice remains largely dominated by patient-level or limited target-lesion criteria that ignore inter-lesion heterogeneity. This limitation is particularly important in prostate cancer, where PSMA PET/CT can reveal extensive skeletal and nodal metastatic disease that often evolves heterogeneously under therapy. Accurate and scalable lesion segmentation and tracking across serial PSMA PET/CT and post-therapy SPECT/CT scans is therefore essential for implementing emerging PSMA-specific response frameworks, such as RECIP 1.0, and for enabling lesion-level dosimetry in 177Lu-PSMA radiopharmaceutical therapies (RPTs). This article examines clinical motivations, technical foundations, and future pathways for automated lesion tracking in prostate cancer imaging. We focus on the unique requirements introduced by PSMA PET/CT compared with FDG PET/CT and highlight the critical role of quantitative SPECT/CT in linking imaging-derived disease characterization with delivered therapeutic dose. Recent advances in AI-based segmentation and automated lesion matching now make scalable longitudinal lesion correspondence feasible, providing comprehensive infrastructure for standardized response assessment and personalized PSMA-based theranostics