https://arxiv.org/api/imxDFhTq3TElOYR71KfUIy4HsOo 2026-09-10T20:22:21Z 24868 45 15 http://arxiv.org/abs/2609.04078v1 2026-09-03T16:47:51Z

The production of antihydrogen by the GBAR experiment at AD/ELENA requires good knowledge of the number of incident keV antiprotons, which can be problematic. We have used a commercial CMOS digital camera mounted around the experimental vacuum chamber to determine antiproton numbers from ionising particles created in the annihilation process on the surface of microchannel plate detectors which are used for beam imaging. We show that the multiplicity of emerging charged particles is as expected for individual annihilations of antiprotons with nucleons at rest, taking into account the surrounding material budget. Most of those particles are in the minimal ionising regime, but can be detected with nearly 100% efficiency in the CMOS pixel detector, while due to the thin depletion layer the device is insensitive to background gammas. Thanks to the high granularity and small pixel size millions of antiproton annihilations can be reconstructed in a dense tracking environment over a large dynamic range with good resolution. From cluster length studies of non perpendicular tracks the thickness of the depletion zone and effective detection area was estimated. The cluster length also allows for a monitoring of track angles. Antiproton numbers are determined from the number of reconstructed clusters in the CMOS sensor by means of the covered solid angle relative to a calibration measurements with well known beam intensities at the most upstream location of the GBAR apparatus. Material effects on the emerging annihilation products were estimated by Monte Carlo (Geant4) calculations, while annihilation artefacts on the complex surface of a microchannel plate are cancelled out in this approach. This method minimises largely systematic uncertainties, leading to a final error of roughly 10% for the reconstruction of absolute antiproton numbers.

2026-09-03T16:47:51Z C. Regenfus P. Adrich I. Belosevic F. Benkel M. Chung P. Cladé P. Comini P. Crivelli P. Debu A. Douillet S. Geffroy S. Guellati-Khelifa P. Guichard P. -A. Hervieux L. Hilico P. Indelicato S. Jonsell J. -P. Karr B. Kim S. Kim E. -S. Kim N. Kuroda B. Lee L. Liszkay D. Lunney G. Manfredi B. Mansoulié V. Martimort M. Matusiak V. Nesvizhevsky F. Nez K. Park N. Paul E. Perez P. Pérez C. Roumegou J. -Y. Roussé F. Schmidt-Kaler K. Szymczyk T. A. Tanaka B. Tuchming D. -P. van der Werf D. Won S. Wronka P. Yzombard http://arxiv.org/abs/2609.04042v1 2026-09-03T16:17:04Z

Testbeam results from a $300\,μ\mathrm{m}$-thick 3D silicon sensor bump-bonded to a Timepix4 ASIC, are presented. The hit detection efficiency, spatial resolution, and timing performance of the 3D sensor are studied for several track angles, bias voltages and charge thresholds. The time measurements are corrected for Timepix4 clock-frequency variations and timewalk, while for the spatial studies, nonlinear charge-sharing corrections are determined. At perpendicular incidence, the time resolution of the 3D detector is equal to $245\,\mathrm{ps}$ with a $97\%$ hit detection efficiency. An optimal angle of $8^\circ$ with respect to the beam direction of the 3D detector was found, in which the time resolution improves by $6\%$ compared to normal incidence, while the hit detection efficiency reaches above $99\%$ and the spatial resolution is approximately $7\,μ\mathrm{m}$. Intrapixel studies show that a time resolution of $153\,\mathrm{ps}$ at the most probable value of the signal charge can be achieved for hits between the electrodes at normal incidence, while the timing performance of these best-performing regions deteriorate upon sensor rotation. The timing properties at different depths of the 3D sensor have been investigated with tracks at grazing-angle incidence, revealing a dependence of the time resolution along the sensor depth.

2026-09-03T16:17:04Z E. Chatzianagnostou M. J. Madurai K. Akiba D. Bacher R. Bates M. van Beuzekom T. Bischoff V. Coco R. Dumps T. Evans K. Heijhoff D. Johnson U. Krämer E. Lemos Cid D. Oppenhuis T. Pajero E. Rodríguez Rodríguez D. Rolf http://arxiv.org/abs/2609.04027v1 2026-09-03T16:08:15Z

Cavity ring-down spectroscopy (CRDS) is widely used for sensitive optical absorption measurements, but its quantitative accuracy can be limited at the few-percent level by systematic distortions originating in the CRDS detection system, particularly at short ring-down times. These limitations can restrict demanding spectroscopic applications requiring sub-permille accuracy, including atmospheric sensing, tests of ab initio theory and fundamental physics, and quantum-based optical gas standards. Here we develop a methodology based on a system-level detection transfer function describing the complete CRDS detection-system response, including detector, electronics, and digitization stages, and use it to correct previously unaccounted-for instrumental distortions in retrieved absorption. We demonstrate the method on a CO absorption line measured down to very short ring-down times using multiple independent CRDS detection configurations, initially exhibiting line-area biases of up to 14%. After applying the transfer-function correction, all systems converge to a common value, with the bias relative to the most accurate ab initio-validated reference data reaching the sub-permille level and the accuracy improving by a factor of 41--87. The proposed framework brings well-established CRDS to the level of the most accurate reference methods without requiring specialized measurement schemes or external calibration standards, making benchmark-quality measurements more widely accessible.

2026-09-03T16:08:15Z 9 pages, 6 figures Rajesh Chell Marcin Gibas Szymon Wójtewicz Jakub Łasocha Daniel Lisak Agata Cygan http://arxiv.org/abs/2609.02337v2 2026-09-03T13:46:22Z

Nano Imaging Trackers (NIT) are fine-grained nuclear emulsions capable of tracking charged particles with sub-micrometric spatial resolution. The DAMON (Direct Measurement of Target Fragmentation) experiment recently employed NIT to detect target-fragmentation events relevant to proton therapy in direct kinematics. These measurements showed that the small crystal size, while providing high spatial resolution, limits the reconstruction efficiency for primary proton tracks and high-energy secondary protons. This work reports an enhancement of NIT sensitivity achieved through alternative chemical sensitization methods, namely gold-plus-sulfur (Au-S) and triethanolamine (TEA), together with the use of the GR-1 developer. The detector response was evaluated with gamma-ray, carbon-ion and proton exposures, including clinically relevant proton energies.

2026-09-02T09:12:25Z V. Boccia INFN, Section of Napoli, Napoli, Italy T. Asada Department of Physics, Faculty of Science, Toho University, Chiba, Japan A. Alexandrov INFN, Section of Napoli, Napoli, Italy G. Ambrosi INFN, Section of Perugia, Perugia, Italy S. Argirò University of Torino, Department of Physics, Torino, Italy INFN, Section of Torino, Torino, Italy M. Barbanera INFN, Section of Perugia, Perugia, Italy N. Bartosik University of Piemonte Orientale, Alessandria, Italy INFN, Section of Torino, Torino, Italy G. Battistoni INFN, Section of Milano, Milano, Italy A. Bigot IPHC, CNRS/Université de Strasbourg, Strasbourg, France M. G. Bisogni University of Pisa, Department of Physics, Pisa, Italy INFN, Section of Pisa, Pisa, Italy G. Butella CNAO, Pavia, Italy F. Cavanna INFN, Section of Torino, Torino, Italy P. Cerello INFN, Section of Torino, Torino, Italy E. Ciarrocchi University of Pisa, Department of Physics, Pisa, Italy INFN, Section of Pisa, Pisa, Italy N. D'Ambrosio INFN, Gran Sasso National Laboratories, Assergi, Italy G. De Lellis University of Napoli Federico II, Department of Physics E. Pancini, Napoli, Italy INFN, Section of Napoli, Napoli, Italy A. Di Crescenzo University of Napoli Federico II, Department of Physics E. Pancini, Napoli, Italy INFN, Section of Napoli, Napoli, Italy B. Di Ruzza University of Foggia, Foggia, Italy INFN, Section of Bari, Bari, Italy M. Dondi INFN, Section of Bologna, Bologna, Italy University of Bologna, Department of Physics and Astronomy, Bologna, Italy M. Donetti CNAO, Pavia, Italy INFN, Section of Torino, Torino, Italy Y. Dong Data Science Unit, Fondazione IRCCS Istituto Nazionale dei Tumori di Milano, Milan, Italy M. Durante University of Napoli Federico II, Department of Physics E. Pancini, Napoli, Italy GSI Helmholtzzentrum, Darmstadt, Germany R. Faccini Sapienza University of Rome, Department of Physics, Rome, Italy INFN, Section of Roma 1, Rome, Italy V. Ferrero University of Torino, Department of Physics, Torino, Italy INFN, Section of Torino, Torino, Italy C. Finck IPHC, CNRS/Université de Strasbourg, Strasbourg, France E. Fiorina INFN, Section of Torino, Torino, Italy M. Francesconi INFN, Section of Napoli, Napoli, Italy M. Franchini INFN, Section of Bologna, Bologna, Italy University of Bologna, Department of Physics and Astronomy, Bologna, Italy G. Franciosini Sapienza University of Rome, SBAI Department, Rome, Italy INFN, Section of Roma 1, Rome, Italy L. Galli INFN, Section of Pisa, Pisa, Italy A. Iuliano University of Napoli Federico II, Department of Physics E. Pancini, Napoli, Italy K. Kanxheri INFN, Section of Perugia, Perugia, Italy B. Kharpuse INFN, Section of Torino, Torino, Italy M. Kimura Department of Proton Therapy Physics, Nagoya Proton Therapy Center, Nagoya City University West Medical Center, Nagoya, Japan University of Trento, Department of Physics, Trento, Italy S. Kodaira Radiation Measurement Research Group, Institute for Radiological Science, National Institutes for Quantum Science and Technology A. C. Kraan INFN, Section of Pisa, Pisa, Italy A. Lauria University of Napoli Federico II, Department of Physics E. Pancini, Napoli, Italy INFN, Section of Napoli, Napoli, Italy E. Lopez Torres CEADEN, Havana, Cuba University of Torino, Department of Physics, Torino, Italy T. Maggipinto University of Bari, Department of Physics, Bari, Italy M. Magi Sapienza University of Rome, SBAI Department, Rome, Italy INFN, Section of Roma 1, Rome, Italy A. Manna INFN, Section of Bologna, Bologna, Italy University of Bologna, Department of Physics and Astronomy, Bologna, Italy M. Marafini Museo Enrico Fermi, Rome, Italy INFN, Section of Roma 1, Rome, Italy S. Masci INFN, Gran Sasso National Laboratories, Assergi, Italy M. Massa INFN, Section of Pisa, Pisa, Italy C. Massimi INFN, Section of Bologna, Bologna, Italy University of Bologna, Department of Physics and Astronomy, Bologna, Italy I. Mattei INFN, Section of Milano, Milano, Italy S. Mazzolani University of Camerino, Camerino, Italy INFN, Section of Perugia, Perugia, Italy A. Mengarelli INFN, Section of Bologna, Bologna, Italy A. Mereghetti CNAO, Pavia, Italy R. Mirabelli Sapienza University of Rome, Department of Physics, Rome, Italy INFN, Section of Roma 1, Rome, Italy A. Moggi INFN, Section of Pisa, Pisa, Italy M. C. Montesi University of Napoli Federico II, Department of Chemistry, Napoli, Italy INFN, Section of Napoli, Napoli, Italy M. C. Morone University of Rome Tor Vergata, Rome, Italy INFN, Section of Roma Tor Vergata, Rome, Italy M. Morrocchi University of Pisa, Department of Physics, Pisa, Italy INFN, Section of Pisa, Pisa, Italy S. Muraro INFN, Section of Milano, Milano, Italy T. Naka Department of Physics, Faculty of Science, Toho University, Chiba, Japan Kobayashi-Maskawa Institute, Nagoya University, Nagoya, Japan N. Pastrone INFN, Section of Torino, Torino, Italy V. Patera Sapienza University of Rome, SBAI Department, Rome, Italy INFN, Section of Roma 1, Rome, Italy F. Pennazio INFN, Section of Torino, Torino, Italy C. Pisanti University of Bologna, Department of Physics and Astronomy, Bologna, Italy INFN, Section of Bologna, Bologna, Italy P. Placidi University of Perugia, Department of Physics and Geology, Perugia, Italy INFN, Section of Perugia, Perugia, Italy M. Pullia CNAO, Pavia, Italy F. Quattrini Sapienza University of Rome, Department of Physics, Rome, Italy INFN, Section of Roma 1, Rome, Italy S. Rabaglia INFN, Section of Bologna, Bologna, Italy L. Ramello University of Piemonte Orientale, Alessandria, Italy INFN, Section of Torino, Torino, Italy C. A. Reidel GSI Helmholtzzentrum, Darmstadt, Germany R. Ridolfi INFN, Section of Bologna, Bologna, Italy L. Rocchetti University of Rome Tor Vergata, Rome, Italy INFN, Section of Roma Tor Vergata, Rome, Italy Museo Enrico Fermi, Rome, Italy L. Sabatini INFN, Frascati National Laboratories, Frascati, Italy L. Salvi University of Perugia, Department of Physics and Geology, Perugia, Italy INFN, Section of Perugia, Perugia, Italy C. Sanelli INFN, Frascati National Laboratories, Frascati, Italy A. Sarti Sapienza University of Rome, SBAI Department, Rome, Italy INFN, Section of Roma 1, Rome, Italy O. Sato Kobayashi-Maskawa Institute, Nagoya University, Nagoya, Japan S. Savazzi CNAO, Pavia, Italy A. Schiavi Sapienza University of Rome, SBAI Department, Rome, Italy INFN, Section of Roma 1, Rome, Italy C. Schuy GSI Helmholtzzentrum, Darmstadt, Germany E. Scifoni TIFPA-INFN, Trento, Italy L. Servoli INFN, Section of Perugia, Perugia, Italy G. Silvestre INFN, Section of Perugia, Perugia, Italy M. Sitta University of Piemonte Orientale, Alessandria, Italy INFN, Section of Torino, Torino, Italy K. Someya Department of Physics, Faculty of Science, Toho University, Chiba, Japan B. Spadavecchia University of Torino, Department of Physics, Torino, Italy INFN, Section of Torino, Torino, Italy R. Spighi INFN, Section of Bologna, Bologna, Italy E. Spiriti INFN, Frascati National Laboratories, Frascati, Italy L. Testa Sapienza University of Rome, Department of Physics, Rome, Italy INFN, Section of Roma 1, Rome, Italy Museo Enrico Fermi, Rome, Italy V. Tioukov INFN, Section of Napoli, Napoli, Italy S. Tomassini INFN, Frascati National Laboratories, Frascati, Italy F. Tommasino University of Trento, Department of Physics, Trento, Italy TIFPA-INFN, Trento, Italy M. Toppi Sapienza University of Rome, SBAI Department, Rome, Italy INFN, Section of Roma 1, Rome, Italy G. Traini INFN, Section of Roma 1, Rome, Italy A. Trigilio INFN, Frascati National Laboratories, Frascati, Italy G. Ubaldi INFN, Section of Bologna, Bologna, Italy University of Bologna, Department of Physics and Astronomy, Bologna, Italy S. Valentinetti University of Bologna, Department of Physics and Astronomy, Bologna, Italy INFN, Section of Bologna, Bologna, Italy M. Vanstalle IPHC, CNRS/Université de Strasbourg, Strasbourg, France M. Villa University of Bologna, Department of Physics and Astronomy, Bologna, Italy INFN, Section of Bologna, Bologna, Italy U. Weber GSI Helmholtzzentrum, Darmstadt, Germany University of Perugia, Department of Physics and Geology, Perugia, Italy R. Zarrella University of Bologna, Department of Physics and Astronomy, Bologna, Italy INFN, Section of Bologna, Bologna, Italy A. Zoccoli University of Bologna, Department of Physics and Astronomy, Bologna, Italy INFN, Section of Bologna, Bologna, Italy G. Galati University of Bari, Department of Physics, Bari, Italy INFN, Section of Bari, Bari, Italy http://arxiv.org/abs/2609.03822v1 2026-09-03T13:23:54Z

Rare-event search experiments demand ever-lower backgrounds, and the resulting radio-pure materials and suppressive shielding make related background simulations computationally expensive without event biasing. We present a method for optimising the widely used importance splitting and Russian roulette technique for rare-event searches, in which a whole number of equal-width importance layers fill the shielding geometry. Balancing relative uncertainty against execution time, we optimise the layer thickness for both $γ$-rays and neutrons, and across different shielding materials and thicknesses. Expressed as a multiple of the primary particle's mean free path, the optimal thickness generalises across energies for a given particle type and yields a physics-based prediction applicable to any shielding design. The same trend reveals that over-biasing is possible, with relative uncertainty worsening at high layer counts for fixed execution time. The optimal configuration gives an $\mathcal{O}$(20) gain in computational efficiency over the unbiased case.

2026-09-03T13:23:54Z 12 pages, 8 figures, 2 tables P. Knights L. J. Milligan K. Nikolopoulos http://arxiv.org/abs/2608.03208v2 2026-09-03T10:02:00Z

Particle therapy using light ions like protons, helium ions or carbon ions enables precise tumor targeting with enhanced biological effectiveness while minimizing damage to healthy tissue. Successful treatment planning depends not only on the absorbed dose but also on quality of the radiation, as quantified by the linear energy transfer (LET). Microdosimetry provides a direct experimental determination of such quantities by measuring the energy deposited per incoming particle in micrometer-sized solid-state detectors representing the relevant biological scales. However, the small signal amplitudes and high particle rates in therapeutic ion beams challenge existing readout systems, which are not sufficiently optimized for reliable operation with respect to pileup and signal-to-noise ratio (SNR). To address this, a modular data acquisition (DAQ) system was developed to accelerate the design of custom readout electronics and sensor characterization in microdosimetry and related spectroscopic applications. Centered around a Xilinx Zynq system-on-chip, it combines real-time processing, high-bandwidth streaming, and high-resolution digitization (16 bit at 100 MSas$^{-1}$) to enable advanced digital signal processing. The platform integrates programmable power supplies, a bias-voltage filter, test-pulse generators, and flexible I/O. Detector and preamplifier front-ends are hosted on interchangeable daugtherboards connected via a standardized interface, allowing different hardware configurations and readout algorithms to be evaluated on the same platform. The Spectacular DAQ system was successfully tested at the MedAustron ion therapy facility with custom charge-sensitive amplifiers and a diamond microdosimeter. First results demonstrate the feasibility and provide a proof-of-concept for potential future applications in clinical practice.

2026-08-04T06:47:32Z Resubmitted to JINST after minor revisions Matthias Knopf Simon Waid Daniel Radmanovac Sebastian Onder Richard Thalmeier Peter Fischer Stefan Gundacker Claudio Verona Edoardo Domenicone Thomas Bergauer Albert Hirtl http://arxiv.org/abs/2609.03570v1 2026-09-03T09:19:10Z

Ion pumps used in cold-atom experiments generate stray magnetic fields that can perturb magneto-optical trapping, shift Zeeman sensitive energy levels, and introduce systematic errors in precision spectroscopy. We numerically investigate a compact low-stray-field ion pump configuration designed to reduce magnetic flux leakage through the ultrahigh-vacuum port without increasing the overall pump size. Starting from a simplified magnetic model of a standard ion pump, we study two complementary modifications: auxiliary permanent magnets surrounding the original pump magnets with opposite magnetisation, and a soft-magnetic honeycomb field stopper integrated at the pump port. The resulting combined configuration strongly reduces the magnetic flux density outside the pump. In the geometry considered here, the field at 10 mm from the UHV port is reduced by 97.9%, while the calculated reduction in effective pumping speed due to the honeycomb stopper is 17.9%. These results indicate that engineered magnetic compensation and field-guiding structures can support more compact cold-atom vacuum systems while preserving pumping performance. Further work should validate the design with nonlinear magnetostatic modelling, molecular-flow simulations, and measurements on a complete pump geometry.

2026-09-03T09:19:10Z 8 pages, 5 figures, 2 tables Preeti Sharma Luisa Loranca Cruz Leonardo Ricci Andrea Bertoldi http://arxiv.org/abs/2505.17709v2 2026-09-03T06:28:07Z

Dissipative sensors typically use linear resonators with impedance matching to achieve maximal signal and fast operation. The impedance matching, however, sets an upper limit to the bandwidth of the readout. In this paper, we present a nonlinear resonator performing the readout of a double quantum dot charge state via a charge-sensing quantum dot. We show that by driving the resonator in the nonlinear regime, we achieve a near-unity signal for a dissipative sensor. This despite not satisfying the sensor impedance matching requirements necessary for such large signals in the linear regime. Our experiments, supported by numerical calculations, demonstrate that the signal increase stems from the sensor dissipation shifting the onset of the nonlinear resonator response. By lifting the matching requirement, we open up an avenue to ultrafast charge detectors as the resonator input-output coupling - setting the detector bandwidth - does not have to match to the typically much slower sensor dissipation rate.

2025-05-23T10:26:39Z Nat. Commun. 17, 5781 (2026) Harald Havir Andrea Cicovic Pierre Glidic Subhomoy Haldar Sebastian Lehmann Kimberly A. Dick Ville F. Maisi 10.1038/s41467-026-75082-w http://arxiv.org/abs/2609.03303v1 2026-09-03T02:53:41Z

Recent development of the differential phase contrast (DPC) scanning transmission electron microscopy (STEM) technique has significantly advanced materials science supported by high-sensitivity detectors and powerful data processing. Especially the 4D-STEM technique, employing a pixelated camera as a STEM detector, enables extensive information acquisition through post-processing of large datasets. However, magnetic or electric field imaging using DPC is often disturbed by diffraction contrasts intrinsic to the crystalline material. In this paper, we demonstrate elimination of the diffraction contrasts for magnetic field imaging by using angularly distributed multiple electron beams generated by a multi-hole aperture within the 4D-STEM framework. This multi-angle beam configuration suppresses irrelevant crystalline contrast and yields direct magnetic information with high sensitivity from the specimen. Furthermore, we performed various image analysis to extract and interpret magnetic domain structures and domain walls.

2026-09-03T02:53:41Z Akira Yasuhara Zentaro Akase Takumi Sannomiya http://arxiv.org/abs/2503.09428v2 2026-09-02T21:09:08Z

The implementation of convolutional neural networks in programmable logic, for applications in fast online event selection at hadron colliders, is studied. In particular, an approach based on full event images for classification is studied, including hardware-aware optimisation of the network architecture, and evaluation of physics performance using simulated data. A range of network models are identified that can be implemented within resources of current FPGAs, as well as the stringent latency requirements of HL-LHC trigger systems. A candidate model that can be implemented in the CMS L1 trigger for HL-LHC is shown to be capable of excellent signal/background discrimination for a key HL-LHC channel, HH(bbbb), although the performance depends strongly on the degree of pile-up mitigation prior to image generation.

2025-03-12T14:26:28Z 12 pages, 6 figures. v2 published version Comput Softw Big Sci 9, 18 (2025) James Brooke Emyr Clement Maciej Glowacki Sudarshan Paramesvaran Jeronimo Segal 10.1007/s41781-025-00150-7 http://arxiv.org/abs/2601.17554v2 2026-09-02T20:23:14Z

The particle-flow (PF) algorithm constructs a global description of each particle collision by producing a comprehensive list of final-state particles, and is central to event reconstruction in the CMS experiment at the CERN LHC. The existing PF implementation relies on physics-motivated heuristics and assumptions that can be replaced by machine-learning (ML) models trained directly on simulated data and naturally suited to modern graphics processing units (GPUs). A state-of-the-art ML-based PF (MLPF) reconstruction algorithm, implemented within the CMS software framework, is presented. The MLPF algorithm performs a learnable full-event reconstruction on GPUs, generalizes across detector conditions and collision energies, and replaces multiple modular reconstruction steps with a single unified model. Physics performance comparable to standard PF reconstruction is achieved in both simulation and data, with improved jet energy resolution and inference time. In simulated top quark-antiquark events under LHC Run-3 (2023$-$2024) conditions, the jet energy resolution improves by 10$-$20% for jets with transverse momentum between 30$-$100 GeV. Inference time is evaluated using simulated multijet events, with a median of 20 ms per event on an Nvidia L4 GPU, compared to approximately 110 ms for the standard CMS PF reconstruction.

2026-01-24T18:49:22Z Replaced with the published version. Added the journal reference and the DOI. All the figures and tables can be found at http://cms-results.web.cern.ch/cms-results/public-results/publications/PFT-25-001 (CMS Public Pages) Eur. Phys. J. C 86 (2026) 1025 CMS Collaboration 10.1140/epjc/s10052-026-15754-5 http://arxiv.org/abs/2609.00972v2 2026-09-02T08:57:47Z

The time performance of Low Gain Avalanche Diodes (LGADs), designed by the University of Science and Technology of China (USTC) and fabricated by the Institute of Microelectronics of Chinese Academy of Sciences (IME), was characterized at the Shanghai Synchrotron Radiation Facility (SSRF). The experiment was conducted at the BL16B1 beamline, which delivers a focused X-ray beam with a diameter of 500 μm, a repetition period of 2 ns, and a photon energy of 10 keV. Using a fast oscilloscope, waveforms containing continuous signal pulses were recorded within a 50 ns time window. The LGAD under test successfully resolved the 2 ns period of the SSRF. To mitigate pile-up effects and extract pulse-by-pulse information from the acquired waveforms, a waveform-level global template fitting method was employed. The time resolution was then estimated using a combined profile likelihood approach, yielding a value of 126.6 ps. The effect of random photon absorption depth on the time resolution of LGADs was studied through dedicated simulations.

2026-09-01T09:29:15Z 14 pages, 19 figures Tianao Wang De Zhang Zheng Liang Chaozhi Li Jiaqi Luo Yu Nie Tianshuo Yue Zebo Tang Hao Liang Tongpu Yu Wanbing He Yanwen Liu http://arxiv.org/abs/2609.02044v1 2026-09-02T03:19:18Z

Microwave angle-of-arrival(AoA) measurement is essential for radar, communication, and spectrum mon-itoring. Existing Rydberg-atom-based AoA schemes employ phase-difference measurements with local oscil-lators, standing-wave fluorescence imaging, or amplitude-ratio readout with internal metal reflectors. Here we demonstrate a new approach: a cylindrical glass vapor cell serving directly as an angle-encoding dielectric structure, eliminating the need for multiple apertures, local oscillators, or imaging optics. The cylindrical geometry produces angle-dependent reflection and field redistribution, mapping the incident AoA onto the effective microwave field sampled by the Rydberg ensemble. This effective field is read out optically via the Autler-Townes(A-T) splitting in the electromagnetically induced transparency(EIT) spectrum. Full-wave simulations and experiments at 11.64 GHz confirm a deterministic, geometry-mediated response over 0°-90°.Over the monotonic operating range(55°-125°), the angular resolution(minimum distinguishable increment)is 0.05°, and the angular accuracy(RMSE of repeated measurements) is 0.13° across the full range, improving to 0.05° in the optimal region(65°-115°). Occupying a sensing volume of~2.5 cm3, this method offers a compact, single-sensor pathway toward Rydberg AoA receivers.

2026-09-02T03:19:18Z 6 pages Peicheng Liu Xingchen Hu Yong Gao Ao-Lin Guo Yuan Ren Hao Wu http://arxiv.org/abs/2407.01439v2 2026-09-01T21:19:26Z

The point-spread function of the probe-forming optics ($PSF_{optics}$) is reported in an uncorrected (without multipole correctors) scanning electron microscope (SEM). In an SEM, information about the electron probe is generally lost as the beam interacts with the specimen. Here, we demonstrate an approach for recovering probe phase information from reconstructed probe intensity estimates. Controlled defocus was used to acquire a focal series of SEM images of $28.5,nm$ gold ($\mathrm{Au}$) nanoparticles ($\mathrm{NPs}$) on a carbon ($\mathrm{C}$) film. These images were used to reconstruct their respective probe intensities, generating a focal series of probe intensities that served as input to the phase retrieval pipeline. Using the complete description (intensity and phase) of the electron probe wavefunction at the specimen plane, we estimate the $PSF_{optics}$ for multiple data sets at a beam energy of $E = 20,keV$. These results represent an important step in demonstrating the possibility of experimental aberration quantification in uncorrected SEMs.

2024-07-01T16:32:39Z Accepted for publication in Micron. Updated title and author list; revised manuscript reflects the accepted version. 9 pages, 6 figures Kamal, S., Nyaburi, K. M., & Hailstone, R. K. (2026). Optical point-spread function via defocus phase retrieval in scanning electron microscopy. Micron, 104097 Surya Kamal Kevin Mogere Nyaburi Richard K. Hailstone 10.1016/j.micron.2026.104097 http://arxiv.org/abs/2609.01841v1 2026-09-01T20:17:06Z

Digital silicon photomultipliers (dSiPM) are arrays of single photon avalanche diodes (SPADs) where each SPAD has its own electronic readout. To maximize the photodetection area, we developed a readout integrated circuit (ROIC) 3D-integrated to a custom-designed SPAD layer fabricated at Teledyne Dalsa (Bromont, Canada) to form a photon-to-digital converter (PDC). This paper presents an improved version of a previously demonstrated ROIC, fabricated in TSMC 180 nm technology to manage a 64 x 64 pixel architecture. This ROIC has different outputs, such as a flag output that produces a pulse whenever one of the pixels triggers and a digital sum that samples the amount of triggered SPADs. Improvements lead to a reduction of the timing jitter on the flag output from 72.0 ps RMS to 22.6 ps RMS through optimized H-tree design. A tunable hold-off circuit provides adjustable dead time from 32 ns to 18 μs, addressing both afterpulsing mitigation and SPAD-to-SPAD variations due to process defects. Power consumption is lowered by 30% at trigger rates exceeding 10 kHz through digital logic optimization and clock gating. These measurements validated that the ROIC is ready for 3D integration into a PDC for systems in medical imaging, particle physics, and quantum sciences.

2026-09-01T20:17:06Z To be published in Journal of Instrumentation (Jinst) Olivier Lepage Tommy Rossignol Nicolas Roy Gabriel Lessard Frédéric Vachon Lorenzo Fabris Serge A. Charlebois Jean-François Pratte