Bayesian Full-waveform Monitoring of CO2 Storage with Fluid-flow Priors via Generative Modeling

2025-12-13T22:44:46Z

Quantitative monitoring of subsurface changes is essential for ensuring the safety of geological CO2 sequestration. Full-waveform monitoring (FWM) can resolve these changes at high spatial resolution, but conventional deterministic inversion lacks uncertainty quantification and incorporates only limited prior information. Deterministic approaches can also yield unreliable results with sparse and noisy seismic data. To address these limitations, we develop a Bayesian FWM framework that combines reservoir flow physics with generative prior modeling. Prior CO2 saturation realizations are constructed by performing multiphase flow simulations on prior geological realizations. Seismic velocity is related to saturation through rock physics modeling. A variational autoencoder (VAE) trained on the priors maps high-dimensional CO2 saturation fields onto a low-dimensional, approximately Gaussian latent space, enabling efficient Bayesian inference while retaining the key geometrical structure of the CO2 plume. Hamiltonian Monte Carlo (HMC) is used to infer CO2 saturation changes from time-lapse seismic data and to quantify associated uncertainties. Numerical results show that this approach improves inversion stability and accuracy under extremely sparse and noisy acquisition, whereas deterministic methods become unreliable. Statistical seismic monitoring provides posterior uncertainty estimates that identify where additional measurements would most reduce ambiguity and mitigate errors arising from biased rock physics parameters. The framework combines reservoir physics, generative priors, and Bayesian inference to provide uncertainty quantification for time-lapse monitoring of CO2 storage and other subsurface processes.

Considerations of Earth climate sensitivity based on peculiarities of planetary heat capacity using system identification method: Runaway greenhouse effect scenario is still possible

2025-12-13T19:33:02Z

System identification method (SIM) was used to evaluate the Earth equilibrium climate sensitivity. According to our simulations, the equilibrium climate sensitivity was found to be between 2 deg C and 7 deg C. Analysis of the changes in heat inventory of oceans, atmosphere, land, and cryosphere was based on the experimental data of IPCC6. The equation derived for Earth's global surface temperature (GST) shows that the sum of the dimensionless feedback coefficients from water vapor, methane, and Earth albedo could be less than 1. However, due to the positive feedback from carbon dioxide (the combined greenhouse catastrophe) and the revised equilibrium climate sensitivity estimate based on an increase in equilibrium climate sensitivity, the probability of the runaway greenhouse effect increases significantly. It is still less than the critical number when not considering the feedback associated with carbon dioxide, water vapor, and methane buildup in Earth's atmosphere. The analysis considers the thermal dynamics of the oceans and other factors, including the exponential growth of the Earth's global temperature based on IPCC6 data.

SoilGen: A Comprehensive Tool for Generating Synthetic Soil Profiles for Geotechnical and Seismic Analysis

2025-12-13T19:02:21Z

Geotechnical and seismic applications, ranging from site response analysis and HVSR simulations to dispersion curve modeling, increasingly depend on large, well-labeled datasets for robust model development. However, the scarcity of publicly available borehole datasets, coupled with the proprietary nature of high-quality field records, creates a significant bottleneck for data-driven research, particularly in machine learning. To address this limitation, this study introduces SoilGen, an open-source framework that procedurally generates physically consistent multilayer soil columns as synthetic soil profiles. Unlike simple randomization, SoilGen computes a complete suite of geotechnical properties, including layer thickness, shear-wave velocity, P-wave velocity, density, and Poisson ratio, while enforcing physical constraints to ensure realism. The algorithmic foundations of the framework and its implementation are outlined, and its utility is demonstrated through representative near-surface geological scenarios relevant to site characterization and near-surface geophysics. By facilitating the rapid generation of large-scale model libraries exceeding one hundred thousand realizations, SoilGen enables comprehensive parametric studies and the training of deep learning inversion networks that require extensive labeled datasets for shear-wave velocity profiling and related site characterization tasks.

HydroDiffusion: Diffusion-Based Probabilistic Streamflow Forecasting with a State Space Backbone

2025-12-13T05:05:27Z

Recent advances have introduced diffusion models for probabilistic streamflow forecasting, demonstrating strong early flood-warning skill. However, current implementations rely on recurrent Long Short-Term Memory (LSTM) backbones and single-step training objectives, which limit their ability to capture long-range dependencies and produce coherent forecast trajectories across lead times. To address these limitations, we developed HydroDiffusion, a diffusion-based probabilistic forecasting framework with a decoder-only state space model backbone. The proposed framework jointly denoises full multi-day trajectories in a single pass, ensuring temporal coherence and mitigating error accumulation common in autoregressive prediction. HydroDiffusion is evaluated across 531 watersheds in the contiguous United States (CONUS) in the CAMELS dataset. We benchmark HydroDiffusion against two diffusion baselines with LSTM backbones, as well as the recently proposed Diffusion-based Runoff Model (DRUM). Results show that HydroDiffusion achieves strong nowcast accuracy when driven by observed meteorological forcings, and maintains consistent performance across the full simulation horizon. Moreover, HydroDiffusion delivers stronger deterministic and probabilistic forecast skill than DRUM in operational forecasting. These results establish HydroDiffusion as a robust generative modeling framework for medium-range streamflow forecasting, providing both a new modeling benchmark and a foundation for future research on probabilistic hydrologic prediction at continental scales.

Machine-learned global glacier ice volumes

2025-12-12T16:07:00Z

We present a global dataset of glacier ice thickness modeled with IceBoost v2.0, a machine learning model trained on 7 million ice thickness measurements and informed by physical and geometrical predictors. We model the distributed ice thickness for every glacier in the two latest Randolph Glacier Inventory releases (v6.0 and v7.0), totaling 215,547 and 274,531 glacier outlines, respectively, plus 955 ice masses contiguous with the Greenland Ice Sheet. We find a global glacier volume of $(149 \pm 38)\times 10^3$ km$^3$, consistent with the previous ensemble estimate of $(147 \pm 28)\times 10^3$ km$^3$. The corresponding sea-level equivalent, $323 \pm 91$ mm, is likewise consistent with the earlier value of $315 \pm 63$ mm. Compared to measurements, IceBoost error is 20-45% lower than the other solutions in the high Arctic, highlighting the value of machine-learning approaches. Confidence in our solution is highest at higher latitudes. Over mountainous terrain, small glaciers, and under-represented lower-latitude regions, confidence is lower. IceBoost v2.0 demonstrates strong generalization at ice sheet margins. On the Geikie Plateau (East Greenland), we find nearly twice as much ice as previously reported, highlighting the method's potential to infer bed topography in parts of the ice sheets. The quality of the solutions depends on the accuracy of the training data, the Digital Elevation Model, ice velocity fields, and glacier geometries, including nunataks. Using the Jensen Gap, we probe the model's curvature with respect to input errors and find it is strongly concave over low-slope, thick-ice regions, implying a potential downward bias in predicted thickness under input uncertainty. The released dataset can be used to model future glacier evolution and sea-level rise, inform the design of glaciological surveys and field campaigns, as well as guide policies on freshwater management.

Physics-Informed Cross-Learning for Seismic Acoustic Impedance Inversion and Wavelet Extraction

2025-12-12T12:45:51Z

Seismic acoustic impedance inversion is one of the most challenging tasks in geophysical exploration. Many studies have proposed the use of deep learning for processing; however, most of them are limited by factors such as seismic wavelets and low-frequency initial models. Furthermore, self-supervised frameworks constructed entirely using deep learning models struggle to form direct and effective physical constraints to unlabeled outputs during the multi-model concatenation, which leads to instability in inversion. In this work, we introduced innovations in both the deep learning framework and training strategy. First, we designed a deep learning framework to perform acoustic impedance inversion and seismic wavelet extraction simultaneously. Building on this foundation, considering the scarcity of well data, we proposed a physics-informed cross-learning strategy to impose effective constraints on the framework. We conducted comparative experiments and ablation experiments on both synthetic datasets and field datasets. The results demonstrate that the proposed method achieves a significant improvement compared with semi-supervised learning methods and can extract seismic wavelets with relatively high accuracy. Finally, to ensure the reproducibility of this work, we have made the code open-source.

Source mechanism and rupture directivity of small earthquakes in the Changning region, China, using a dense array data

2025-12-12T06:58:18Z

Integrating focal mechanism solutions with rupture directivity analysis enables high-resolution characterization of subsurface fault geometry and earthquake rupture processes. However, resolving these parameters for small-magnitude earthquakes remains challenging due to small rupture sizes, short durations, and low signal-to-noise ratio (SNR). Here, we utilized a dense array of nodal seismometers in the Changning region, Sichuan Basin, China, to study the focal mechanism and rupture directivity of aftershocks following the 2019 Ms 6.0 induced earthquake. Using PhaseNet+ and SKHASH, we first enhance the focal mechanism catalog (11), and their spatial variability reflects a long-term interplay between fluid injection and faults in the salt-mining area. These findings illuminate a complex fault system beneath the Changning anticline and highlight the importance of high-resolution seismic arrays in resolving rupture processes of small-magnitude events.

Predominant-Mode Inversion of Surface Waves: Inherently Addressing Inconspicuous Low Frequency Mode Jumps

2025-12-12T03:58:28Z

Inversion of Rayleigh-wave dispersion data is particularly challenging at sites with strong impedance contrasts, where modal energy often transitions smoothly from the fundamental to higher modes at low frequencies. Analysts may misinterpret this transition as a continuation of the fundamental mode, leading to an overestimation of shear-wave velocity (Vs) in deeper layers and/or a misinterpretation of bedrock depth. Although effective-mode inversion can theoretically account for such behavior, it requires precise source-receiver geometry and cannot be applied when target dispersion data are formed by combining multiple active shots with passive-array recordings that have unknown source locations. This study introduces a predominant-mode inversion framework that addresses low-frequency mode jumps by automatically identifying, at each frequency, the Rayleigh-wave mode with the maximum vertical surface amplitude. This enables inversion without explicit mode indexing or assumptions about fundamental-mode dominance. The predominant-mode forward model is derived and implemented using the thin-layer method. The forward model is integrated into a particle-swarm-optimization global search algorithm and applied to invert three synthetic models exhibiting low-frequency mode jumps, using multiple layering parameterizations. Across all cases, the predominant-mode method accurately recovers major velocity contrasts and interface depths, whereas fundamental-mode inversions consistently overestimate Vs and mislocate deeper boundaries. The method is further validated using real field data from active and passive surface-wave measurements at the I15 Downhole Array Site. Inverted Vs profiles show strong agreement with downhole PS logs and with empirical transfer functions. Overall, the predominant-mode framework provides a robust approach for surface-wave inversion at sites with strong impedance contrasts.

Integrating Regional Ice Charts and Copernicus Sea Ice Products for Navigation Risk in Alaskan Waters

2025-12-11T19:55:03Z

As climate change continues to reshape marginal ice zones in the Arctic, accurate and reliable sea ice data are critical for ensuring maritime safety. This study compares regional ice charts from the Alaska Sea Ice Program with satellite derived Copernicus sea ice concentration data to evaluate spatial and temporal discrepancies in ice representation across Alaskan waters from January 2010 to March 2025. Daily Arctic Sea Ice Program polygons were aligned with Copernicus grid points in a common UTM framework, and residuals were computed to quantify systematic differences. Results show that Copernicus consistently underestimates ice concentration relative to Arctic Sea Ice Program, particularly in nearshore and marginal ice zones affected by land-spillover and mixed-pixel effects such as those observed in Cook Inlet. Empirical Orthogonal Function analysis shows that both datasets capture the same dominant physical modes of sea ice variability, with the first mode representing the annual freeze thaw cycle and the second reflecting marginal ice-zone dynamics. To assess operational implications, vessel Automatic Identification System data were combined with Alaska Sea Ice Program ice charts using the IACS POLARIS Risk Index Outcome framework. Approximately 36 percent of AIS observations within ice affected waters corresponded to negative Risk Index Outcome values, indicating that vessels frequently operated under elevated-risk conditions. These findings demonstrate that regional charts and Copernicus provide complementary capabilities that together enable more accurate and operationally meaningful Arctic navigation and risk assessments.

An analytical framework for atmospheric tides on rocky planets. I. Formulation

2025-12-11T12:07:57Z

Atmospheric thermal tides arise from the diurnal contrast in stellar irradiation. They exert a significant influence on the long-term rotational evolution of rocky planets because they can accelerate the planetary spin, thereby counteracting the decelerating effect of classical gravitational tides. Consequently, equilibrium tide-locked states may emerge, as exemplified by Venus and hypothesised for Precambrian Earth. Quantifying the atmospheric thermal torque and elucidating its dependence on tidal frequency -- both in the low- and high-frequency regimes -- is therefore essential. In particular, we focus here on the resonance that affected early Earth, which is associated with a forced Lamb wave. Within the framework of linear theory, we develop a new analytical model of the atmospheric response to both gravitational an thermal tidal forcings for two representative vertical temperature profiles that bracket the atmospheres of rocky planets: (i) an isothermal profile (uniform temperature) and (ii) an isentropic profile (uniform potential temperature). Dissipative processes are incorporated via Newtonian cooling. We demonstrate that the isothermal and isentropic cases are governed by the same general closed-form solution, and we derive explicit expressions for the three-dimensional tidal fields (pressure, temperature, density and wind velocities) throughout the spherical atmospheric shell. These results constitute the foundation for two forthcoming papers, in which analytical formulae for the thermotidal torque will be presented and compared with numerical solutions obtained from General Circulation Models (GCMs).

Dynamics of motions and deformations of an arbitrary geometry flexural floe in ocean waves

2025-12-11T09:23:07Z

This paper develops a comprehensive mathematical framework for modeling the coupled hydroelastic dynamics of sea-ice floes of arbitrary shape and non-uniform thickness under linear ocean wave forcing. We simultaneously incorporate four dominant rigid-body motions (heave, surge, roll, pitch) and the complete spectrum of flexural deformation modes within a unified Green function formulation. The water flow is modeled using potential theory with Laplace's equation, while the floe obeys a generalized Kirchhoff-Love plate equation with spatially varying flexural rigidity. We formulate the coupled fluid-structure interaction problem through kinematic velocity-matching conditions and dynamic pressure-continuity conditions at the ice-water interface. The elastic eigenproblem with free-edge boundary conditions yields a complete orthogonal basis of deformation modes, accounting for added mass effects through modified natural frequencies. By decomposing the velocity potential into partial potentials associated with incident waves, scattered waves, rigid motions, and elastic modes, we reduce the problem to a system of Fredholm integral equations of the second kind for surface density functions on all boundary segments. The solution methodology employs single-layer potential representations with fundamental Green functions for Laplace's equation. We present explicit formulations for all boundary conditions in compact tensor form, provide asymptotic analysis for the spectrum of non-uniform thickness floes, and discuss resonance phenomena arising from the interaction between incident wave frequency and natural vibration modes.

A Sampling Strategy Benchmark for Machine-Learning-Based Seismic Liquefaction Prediction

2025-12-11T08:40:16Z

Sampling strategy including sampling methods and training set configurations (training set sample size, train-test split ratio, and class distribution) significantly affects machine-learning (ML) model performance in seismic liquefaction prediction. However, existing ML applications in seismic liquefaction prediction remain fragmented: sampling strategies vary widely across studies without a unified benchmark. Moreover, these studies generally optimize the sample set configuration independently, ignoring the interaction among training set configurations. To address these limitations, this study establishes a benchmark that systematically evaluates sampling methods, training set sample sizes, train-test split ratios, class distributions, and training set configurations coupling on seven mainstream ML models performance, and further improves the predictive accuracy of seismic liquefaction-using a database of 250 historical liquefaction events, evaluated by Acc and F1. The results show that ordered systematic sampling yields the best performance across all models. The optimal model can be trained when the training set sample size is 200, the train-test split ratio is 80:20, and the class distribution range is 1-1.5. Among them, the train-test split ratio most significantly influenced performance, followed by the class distribution, with the training set sample size having the least effect. Furthermore, the Random Forest model achieves the highest performance, while the K-Nearest Neighbor model performs the weakest. Importantly, this study systematically identifies and verifies for the first time that there will be an interaction effect among training set configurations, rather than a simple additive effect. This study provides a benchmark for scholars to select the optimal sampling method and training set configurations to obtain high accuracy in ML-based liquefaction prediction.

On the Frechet Root Kernel of Certain Wave Equations

2025-12-10T12:57:27Z

We extend the adjoint method to complex-valued PDEs and introduce the Fréchet root sensitivity kernel, as the most fundamental kernel from which all other material-sensitivity kernels can be derived. We apply this framework to four representative equations: two real-valued PDEs (the second-order wave equation and the Euler--Bernoulli beam equation) and two complex-valued PDEs (the complex transport equation and the Schroedinger equation with zero potential). We compute and analyze the Frechet root kernels for all four PDEs and show that, for constant material parameters, the kernel exhibits a consistent structure across systems, while its instantaneous form propagates as a wave whose shape depends on the initial conditions. For the Schroedinger equation, we find an especially notable result: the integrand of the Frechet root kernel coincides with the Born rule of quantum mechanics, suggesting that the probabilistic interpretation of the wavefunction may arise naturally from a general sensitivity-analysis framework rather than from an independent postulate. Our results establish a unified approach to sensitivity analysis for real- and complex-valued PDEs, provide a new perspective on the origin of the Born rule.

Seeing Soil from Space: Towards Robust and Scalable Remote Soil Nutrient Analysis

2025-12-10T12:08:55Z

Environmental variables are increasingly affecting agricultural decision-making, yet accessible and scalable tools for soil assessment remain limited. This study presents a robust and scalable modeling system for estimating soil properties in croplands, including soil organic carbon (SOC), total nitrogen (N), available phosphorus (P), exchangeable potassium (K), and pH, using remote sensing data and environmental covariates. The system employs a hybrid modeling approach, combining the indirect methods of modeling soil through proxies and drivers with direct spectral modeling. We extend current approaches by using interpretable physics-informed covariates derived from radiative transfer models (RTMs) and complex, nonlinear embeddings from a foundation model. We validate the system on a harmonized dataset that covers Europes cropland soils across diverse pedoclimatic zones. Evaluation is conducted under a robust validation framework that enforces strict spatial blocking, stratified splits, and statistically distinct train-test sets, which deliberately make the evaluation harder and produce more realistic error estimates for unseen regions. The models achieved their highest accuracy for SOC and N. This performance held across unseen locations, under both spatial cross-validation and an independent test set. SOC obtained a MAE of 5.12 g/kg and a CCC of 0.77, and N obtained a MAE of 0.44 g/kg and a CCC of 0.77. We also assess uncertainty through conformal calibration, achieving 90 percent coverage at the target confidence level. This study contributes to the digital advancement of agriculture through the application of scalable, data-driven soil analysis frameworks that can be extended to related domains requiring quantitative soil evaluation, such as carbon markets.

The Complex-Step Integral Transform

2025-12-10T09:29:04Z

Building on the well-established connection between the Hilbert transform and derivative operators, and motivated by recent developments in complex-step differentiation, we introduce the Complex-Step Integral Transform (CSIT): a generalized integral transform that combines analytic continuation, derivative approximation, and multi-scale smoothing within a unified framework. A spectral analysis shows that the CSIT preserves phase while suppressing high-wavenumber noise, offering advantages over conventional Fourier derivatives. We discuss the roles of the real and imaginary step parameters, compare FFT-based and interpolation-based implementations, and demonstrate the method on the advection equation and instantaneous-frequency computation. Results show that the CSIT yields smoother, more robust attributes than Hilbert-based methods and provides built-in stabilization for PDE solvers. The CSIT thus represents a flexible alternative for numerical differentiation, spectral analysis, and seismic signal processing. The method opens several avenues for future work, including non-periodic implementations, adaptive parameter selection, and integration with local interpolation frameworks such as high-order Finite-Element methods.