https://arxiv.org/api/njySotASgOe+qVu/a5ISvLaHlXY 2026-04-11T14:35:33Z 8563 285 15 http://arxiv.org/abs/2601.15302v1 2026-01-10T07:32:56Z

The M8.8 Kamchatka earthquake on July 29, 2025 was one of the largest in the first quarter of the 21st century. It deserves a thorough analysis including the preparation process. A smaller M7.4 earthquake occurred on July 20 with its epicenter within the confidence ellipse for the July 29 event. The aftershock sequence of the July 20 earthquake and the evolution of seismicity within the Kamchatka Peninsula region during 10 days period before the July 29 event may provide important information on the earthquake preparation and initiation processes. The CTBTO's International Monitoring System is one of the most sensitive global seismic networks comprising high-resolution array stations with enhanced sensitivity relative to three-component stations at the same locations. The International Data Centre of the CTBTO processes IMS data automatically and interactively to create a Reviewed Event Bulletin (REB), which serves as a source of information for the International Seismological Centre. Waveform cross-correlation (WCC) allows for additional detection capabilities to the IMS data and IDC processing when repeated seismicity is analyzed. The aftershock sequence of the July 20 earthquake is recovered using the WCC-based detection and phase association techniques as applied to the IMS data in order to accurately describe the spatio-temporal evolution of seismic process just before the July 29 event. With the reduced detection threshold, smaller events are found in the zones where the REB has no located sources. This finding opens up the possibility for a more detailed study of seismic and mechanical processes before the July 29 mainshock.

2026-01-10T07:32:56Z 23 pages, 5 figures Ivan O. Kitov http://arxiv.org/abs/2504.04260v2 2026-01-10T00:55:54Z

Modeling high-frequency information is a critical challenge in scientific machine learning. For instance, fully turbulent flow simulations of the Navier-Stokes equations at Reynolds numbers 3500 and above can generate high-frequency signals due to swirling fluid motions caused by eddies and vortices. Faithfully modeling such signals using neural nets depends on the accurate reconstruction of moderate to high frequencies. However, it has been well known that neural nets exhibit spectral or frequency bias towards learning low-frequency components. Meanwhile, Fourier Neural Operators (FNOs) have emerged as a popular class of data-driven models for surrogate modeling and solving PDEs. Although impressive results were achieved on several PDE benchmark problems, FNOs perform poorly in learning non-dominant frequencies characterized by local features. This limitation stems from spectral bias inherent in neural nets and the explicit exclusion of high-frequency modes in FNOs and their variants. Therefore, to mitigate these issues and improve FNO's spectral learning capabilities to represent a broad range of frequency components, we propose two key architectural enhancements: (i) a parallel branch performing local spectral convolution (ii) a high-frequency propagation module. Moreover, we propose a novel frequency-sensitive loss based on radially binned spectral errors. This introduction of a parallel branch for local convolution reduces the trainable parameters by up to 50% while achieving the accuracy of FNO that relies solely on global convolution. Moreover, our findings demonstrate that the proposed model improves stability over longer rollouts. Experiments on six challenging PDEs in fluid mechanics, wave propagation, and biological pattern formation, and the qualitative and spectral analysis of predictions, show the effectiveness of our method over SOTA neural operator families of baselines.

2025-04-05T19:35:04Z Published with J2C Certification in Transactions on Machine Learning Research (TMLR) Marimuthu Kalimuthu David Holzmüller Mathias Niepert http://arxiv.org/abs/2210.15548v2 2026-01-09T21:30:38Z

The real-time interpretation of the logging-while-drilling data allows us to estimate the positions and properties of the geological layers in an anisotropic subsurface environment. Robust real-time estimations capturing uncertainty can be very useful for efficient geosteering operations. However, the model errors in the prior conceptual geological models and forward simulation of the measurements can be significant factors in the unreliable estimations of the profiles of the geological layers. The model errors are specifically pronounced when using a deep-neural-network (DNN) approximation which we use to accelerate and parallelize the simulation of the measurements. This paper presents a practical workflow consisting of offline and online phases. The offline phase includes DNN training and building of an uncertain prior near-well geo-model. The online phase uses the flexible iterative ensemble smoother (FlexIES) to perform real-time assimilation of extra-deep electromagnetic data accounting for the model errors in the approximate DNN model. We demonstrate the proposed workflow on a case study for a historic well in the Goliat Field (Barents Sea). The median of our probabilistic estimation is on-par with proprietary inversion despite the approximate DNN model and regardless of the number of layers in the chosen prior. By estimating the model errors, FlexIES automatically quantifies the uncertainty in the layers' boundaries and resistivities, which is not standard for proprietary inversion.

2022-10-27T15:38:26Z In this version, the typo mistake in the title has been corrected Geophysics (2024) 89 (6) D301-D314 Muzammil Hussain Rammay Sergey Alyaev David Selvåg Larsen Reidar Brumer Bratvold Craig Saint 10.1190/geo2023-0576.1 http://arxiv.org/abs/2601.05994v1 2026-01-09T18:21:33Z

Resilience is a property of social, ecological, social-ecological and biophysical systems. It describes the capacity of a system to cope with, adapt to and innovate in response to a changing surrounding. Given the current climate change crisis, ensuring conditions for a sustainable future for the habitability on the planet is fundamentally dependent on Earth System (ES) resilience. It is thus particularly relevant to establish a model that captures and frames resilience of the ES, most particularly in physical terms that can be influenced by human policy\footnote{See page 4 for examples of strategies}. In this work we propose that resilience can serve as a theoretical foundation when unpacking and describing metastable states of equilibrium and energy dissipation in any dynamic description of the variables that characterise the ES. Since the impact of the human activities can be suitably gauged by the planetary boundaries (PBs) and the planet's temperature is the net result of the multiple PB variables, such as $\text{CO}_2$ concentration and radiative forcing, atmospheric aerosol loading, atmospheric ozone depletion, etc, then resilience features arise once conditions to avoid an ES runaway to a state where the average temperature is much higher than the current one. Our model shows that this runaway can be prevented by the presence of metastable states and dynamic friction built out of the interaction among the PB variables once suitable conditions are satisfied. In this work these conditions are specified. As humanity moves away from Holocene conditions, we argue that resilience features arising from metastable states might be crucial for the ES to follow sustainable trajectories in the Anthropocene that prevent it run into a much hotter potential equilibrium state.

2026-01-09T18:21:33Z 18 pages, 2 figures; Accepted for publication at EGUsphere Orfeu Bertolami Magnus Nyström http://arxiv.org/abs/2506.16265v2 2026-01-09T10:09:45Z

Landslide monitoring is essential for understanding geohazards and mitigating associated risks. Existing point cloud-based methods, however, typically rely on either geometric or radiometric information and often yield sparse or non-3D displacement estimates. In this paper, we propose a hierarchical partitioning-based coarse-to-fine approach that integrates 3D point clouds and co-registered RGB images to estimate dense 3D displacement vector fields. Patch-level matches are constructed using both 3D geometry and 2D image features, refined via geometric consistency checks, and followed by rigid transformation estimation per match. Experimental results on two real-world landslide datasets demonstrate that the proposed method produces 3D displacement estimates with high spatial coverage (79% and 97%) and accuracy. Deviations in displacement magnitude with respect to external measurements (total station or GNSS observations) are 0.15 m and 0.25 m on the two datasets, respectively, and only 0.07 m and 0.20 m compared to manually derived references, all below the mean scan resolutions (0.08 m and 0.30 m). Compared with the state-of-the-art method F2S3, the proposed approach improves spatial coverage while maintaining comparable accuracy. The proposed approach offers a practical and adaptable solution for TLS-based landslide monitoring and is extensible to other types of point clouds and monitoring tasks. The example data and source code are publicly available at https://github.com/gseg-ethz/fusion4landslide.

2025-06-19T12:28:09Z Published in the International Journal of Applied Earth Observation and Geoinformation. 25 pages, 19 figures Int. J. Appl. Earth Obs. Geoinf., Vol. 146, 105093, 2026 Zhaoyi Wang Jemil Avers Butt Shengyu Huang Tomislav Medic Andreas Wieser 10.1016/j.jag.2026.105093 http://arxiv.org/abs/2410.09002v3 2026-01-09T04:54:25Z

Full Waveform Inversion (FWI) is a critical technique in subsurface imaging, aiming to reconstruct high-resolution subsurface properties from surface measurements. Acoustic FWI involves two physical modalities, seismic waveforms and velocity maps, which are governed by the acoustic wave equation. Prior works primarily focus on the inverse problem, modeling the relationship between seismic and velocity as an image-to-image translation task. In this work, we study their relationship from a generative perspective. Our aim is to explore and characterize the latent space structure, and identify latent vectors that generate seismic-velocity pairs consistent with the governing partial differential equation (PDE). Specifically, we model seismic and velocity data jointly from a shared latent space via a diffusion process. In experiments, we find that diffusion progressively refines arbitrary latent vectors into ones that yield approximately physics-consistent seismic-velocity pairs, even without explicit physics constraints. This provides empirical evidence of PDE-consistency in latent diffusion, where sampling is biased toward PDE-valid solutions. In latent space, satisfying the acoustic wave equation can be approximated through sampling and gradient descent. We formalize this physics-consistent latent modeling task and quantify it through extensive experiments. On large-scale OpenFWI benchmarks, our approach produces high-fidelity, diverse, and physically consistent seismic-velocity pairs, demonstrating the potential of a data-driven latent diffusion for physically consistent generation in a complex scientific domain.

2024-10-11T17:18:40Z Yinan Feng Hanchen Wang Yinpeng Chen Luoyuan Zhang Jeeun Kang Yixuan Wu Young Jin Kim Youzuo Lin http://arxiv.org/abs/2601.05489v1 2026-01-09T02:45:48Z

Empirical Green's functions (EGFs) extracted from seismic ambient noise have been widely used to image Earth's interior structures, and the resolution of EGF-based tomography depends on the spatial density of seismic stations. However, due to cost and logistical constraints, it is often difficult to deploy dense seismic networks suitable for high-resolution tomography. While reliable interpolation of EGFs at unsampled locations could enhance tomographic resolution, the task remains inherently challenging and underexplored due to the dispersive nature of EGFs. In this study, we introduce DIER (diffusion-assisted implicit EGF representation), a self-supervised learning framework that integrates implicit neural representation with denoising diffusion probabilistic models to achieve high-fidelity EGF interpolation. In DIER, the diffusion process is conditioned on station coordinates to guide the transformation from random noise into EGF waveforms, which allows flexible reconstruction of five-dimensional EGF fields without labeled data or synthetic waveforms. We demonstrate the effectiveness of DIER through continent-scale EGF interpolation across the United States. The results show that DIER significantly outperforms the conventional radial basis function-based interpolation approach by generating EGFs with markedly improved phase alignment and dispersion characteristics. Surface wave tomography using the phase velocities derived from the interpolated EGFs also closely matches a reference model constructed from data acquired by a much denser seismic network. Our findings suggest that DIER provides a promising and cost-effective approach toward high-resolution ambient noise tomography in regions with sparse station coverage.

2026-01-09T02:45:48Z Submitted to Geophysical Journal International Guoyi Chen Junlun Li Bao Deng http://arxiv.org/abs/2601.04829v1 2026-01-08T11:08:31Z

In the last thirty years, the Northern and Central Apennines (Italy) have been affected by three main destructive seismic sequences: the 1997 Colfiorito (three events $M_L > 5.5$), the 2009 L'Aquila (one event $M_L > 5.5$), and the 2016--2017 Amatrice--Visso--Norcia (three events $M_L > 5.5$). Several studies have analysed the spatio-temporal evolution and processes driving each sequence, focusing mainly on the foreshock--mainshock--aftershock periods. Here, we focus on the 2018--2024 interseismic phase, aiming to unravel the long-term seismogenic behaviour of this region. We first relocated the earthquake catalogue and identified clusters through a declustering algorithm. During this phase, background seismicity and most clusters were arranged in a 2--3 km thick low-angle layer. We found that (i) most clusters were driven by aseismic processes, (ii) the depth of both clusters and the seismicity layer increased toward the southeast, (iii) the volume of clusters decreased toward the southeast, and (iv) the low-angle layer almost disappeared in the L'Aquila area. Comparing two interseismic phases (2011--2016 and 2018--2024), we found striking similarities, with events occurring at the same sites and characterized by both foreshock--mainshock--aftershock and swarm-like behaviour. In addition, the L'Aquila area was seismically more silent compared to the northern sites during both interseismic phases. We propose that these different long-term seismogenetic behaviours reflect variations in the structure and rheology of the upper crust from the Northern to the Central Apennines. This highlights the important role of structural inheritance in controlling how active deformation affects the interseismic period.

2026-01-08T11:08:31Z Marion Baques Piero Poli Michele Fondriest http://arxiv.org/abs/2601.04717v1 2026-01-08T08:35:03Z

Field geological studies highlighted the heterogeneous structure of fault zones from the meter- to millimeter scale, but such internal variability is not generally resolved by seismological techniques due to spatial resolution limits. The near-surface velocity structure of the Vado di Corno seismogenic fault zone was quantified at different length scales, from laboratory measurements of ultrasonic velocities (few centimeters rock samples, 1 MHz source) to high-resolution first-arrival seismic tomography (spatial resolution to a few meters). The fault zone juxtaposed structural units with contrasting ultrasonic velocities. The fault core cataclastic units were slower compared to damage zone units. A negative correlation between ultrasonic velocity and porosity was observed, with dispersion in fault core units related to varying degree of textural maturity and pore space sealing by calcite. Low-velocity outliers in the damage zone were instead linked to microfracture networks with local cataclasis and partial calcite sealing. P-wave high-resolution seismic tomography imaged distinct fault-bounded rock bodies, matching the geometry and size of field-mapped structural units. At this length scale, relatively fast fault core units and low-strain damage zones contrasted with a very slow intensely fractured high-strain damage zone. The discrepancy between higher ultrasonic velocities and lower tomography-derived ones was reconciled through an effective medium approach considering the effect of meso-scale fractures in each unit. This revealed a heterogeneous fault zone velocity structure with different scaling among structural units. Lastly, the persistence of a thick compliant high-strain damage zone at shallow depth may significantly affect fault zone mechanics and the distribution of near-surface deformations.

2026-01-08T08:35:03Z Michele Fondriest Thomas M. Mitchell Maurizio Vassallo Stephane Garambois Giuseppe Di Giulio Fabrizio Balsamo Marta Pischiutta Mai-Linh Doan http://arxiv.org/abs/2601.04328v1 2026-01-07T19:05:01Z

Seismic interpretation is strongly influenced by the relationship between subsurface layer depth and velocity. Small variations in these parameters can produce almost identical responses, characterizing the depth-velocity trade-off phenomenon. This work proposes a statistical and computational approach to evaluate the extent of this effect through Monte Carlo simulations involving thousands of synthetic models. The analysis consists of generating random depth-velocity pairs, computing travel times, and calculating the root mean square error (RMSE) relative to a reference model. The results show that multiple parameter combinations yield nearly indistinguishable travel times, confirming the existence of broad ambiguity regions. Finally, a two-layer geological velocity model is presented to illustrate the relationship between structure and velocity.

2026-01-07T19:05:01Z Rafael da Silva Garcia Francisco Marcio Barboza http://arxiv.org/abs/2601.03856v1 2026-01-07T12:12:01Z

Meteotsunamis are atmospherically driven sea-level oscillations that can trigger hazardous coastal flooding, particularly in resonant bays. This study assesses the GPU-based Meteo-HySEA model for meteotsunami simulation in the Adriatic Sea, benchmarking its performance against the CPU-based AdriSC-ADCIRC system. Three documented events (2014, 2017, 2020) were simulated using WRF downscaling of ERA reanalyses and validated with tide-gauge and microbarograph observations. Both models are limited by the underestimation of mesoscale pressure disturbances in the atmospheric forcing. Meteo-HySEA generally reproduces the timing and spatial variability of sea-level oscillations and often yields larger amplitudes than ADCIRC, but it tends to overestimate dominant wave periods, particularly in enclosed basins. Differences in oscillation persistence underscore the need for further validation against high-resolution tide-gauge data to assess whether Meteo-HySEA captures harbor seiches more realistically or ADCIRC better represents physical energy dissipation. Crucially, GPU acceleration provides order-of-magnitude gains in computational efficiency, enabling rapid high-resolution, multi-grid simulations including inundation, and thus offering strong potential for operational early warning.

2026-01-07T12:12:01Z 39 pages, 19 figures Alejandro González Cléa Denamiel Jorge Macías http://arxiv.org/abs/2601.03177v1 2026-01-06T16:54:41Z

Brazil is located in the central-eastern portion of the South American Plate, meaning that the country mostly experiences low-intensity seismic activity within its territory. However, some geological faults in this region have generated intense earthquakes. In this context, we intend to describe a recent earthquake of magnitude around 6.5 M_b that occurred at a depth of approximately 600 km in the state of Acre, Brazil. In this work, we modeled the propagation of P-SV seismic waves using a two-dimensional system of partial differential equations (PDEs) in a two-dimensional vertical rectangular domain. The source is modeled by a Gaussian pulse function. The initial quiescence condition and Neumann boundary conditions are used. The PDE system is discretized by the finite difference method (FDM) and solved by the Gauss-Seidel method (GSM). The numerical simulations obtained describe the propagation of attenuated seismic waves in multiple geological layers, simulating intense and deep earthquakes in Acre. We used the propagation of perfect seismic waves to validate the model. The results include images of the simulations and theoretical seismograms simulating the vertical and horizontal displacement in the epicenter region and 200 km east and west of the epicenter.

2026-01-06T16:54:41Z 25 pages, 9 figures, and 5 tables. Keywords: Seismic Waves, Mathematical Modelling, Finite Difference Method, Numerical Simulations, Earthquakes, Seismograms Pedro Huan Moreira Andina Alay Lerma Eliandro Rodrigues Cirilo Neyva Maria Lopes Romeiro Waldemir Lima Dos Santos Paulo Laerte Natti http://arxiv.org/abs/2601.02890v1 2026-01-06T10:24:11Z

Gravity exploration has become an important geophysical method due to its low cost and high efficiency. With the rise of artificial intelligence, data-driven gravity inversion methods based on deep learning (DL) possess physical property recovery capabilities that conventional regularization methods lack. However, existing DL methods suffer from insufficient prior information constraints, which leads to inversion models with large data fitting errors and unreliable results. Moreover, the inversion results lack constraints and matching from other exploration methods, leading to results that may contradict known geological conditions. In this study, we propose a novel approach that integrates prior density well logging information to address the above issues. First, we introduce a depth weighting function to the neural network (NN) and train it in the weighted density parameter domain. The NN, under the constraint of the weighted forward operator, demonstrates improved inversion performance, with the resulting inversion model exhibiting smaller data fitting errors. Next, we divide the entire network training into two phases: first training a large pre-trained network Net-I, and then using the density logging information as the constraint to get the optimized fine-tuning network Net-II. Through testing and comparison in synthetic models and Bishop Model, the inversion quality of our method has significantly improved compared to the unconstrained data-driven DL inversion method. Additionally, we also conduct a comparison and discussion between our method and both the conventional focusing inversion (FI) method and its well logging constrained variant. Finally, we apply this method to the measured data from the San Nicolas mining area in Mexico, comparing and analyzing it with two recent gravity inversion methods based on DL.

2026-01-06T10:24:11Z Siyuan Dong Jinghuai Gao Shuai Zhou Baohai Wu Hongfa Jia http://arxiv.org/abs/2601.01534v2 2026-01-06T09:04:44Z

The Tibetan Plateau (TP), known as the "Asian Water Tower," is currently undergoing a rapid wetting trend. While this moisture increase is often viewed as beneficial for water availability, it remains unclear whether the hydrological system itself is becoming more resilient or drifting toward instability. Here, we apply an entropy-based framework to quantify the changing structural organization of the TP's soil moisture system. We show that from 2000 to 2024, regional wetting has driven a long-term decline in entropy, reflecting an increase in system order and stability due to enhanced hydrological buffering capacity. This stability is modulated by the El Niño-Southern Oscillation (ENSO), which regulates regional heterogeneity via a distinct spatial dipole. Crucially, however, CMIP6 climate projections reveal an alarming reversal: future warming triggers a rise in entropy. This transition signals a loss of systemic resilience, characterized by intensified spatial disorder and potential abrupt regime shifts by the mid-century. Our findings suggest that while current wetting provides a stabilizing buffer, continued warming is projected to amplify spatial heterogeneity, thereby destabilizing the Asian Water Tower, with significant risks for downstream water security.

2026-01-04T14:05:31Z Yiran Xie Teng Liu Xuan Ma Yingshuo Lyu Xu Wang Yatong Qian Yongwen Zhang Ming Wang Xiaosong Chen http://arxiv.org/abs/2601.02575v1 2026-01-05T21:59:11Z

The San Fernando Valley (SFV) in Southern California is a complex sedimentary basin whose shape strongly influences ground shaking. We develop a fully quantitative, probabilistic graph-regularized inference model that integrates both gravity and receiver function (RF) constraints and evaluate its ability to determine the basin's shape. The sediment-basement interface in single-station RFs is often difficult to interpret due to scattering and noise, which can render isolated stations unusable. By using RFs from a dense seismic array and incorporating gravity, we address the issue of non-uniqueness in converting the times of RF phases to layer thickness by comparing the predicted gravity to observations at each station. In areas where the density contrast may change, Bayesian inference with a graph Laplacian allows us to determine the effective density contrast by taking into account its neighbors' picks and densities. This method promotes spatial smoothness between neighboring stations, while preserving sharp contrasts in locations supported by the RF and gravity data. We applied this method to a dataset that was acquired in fall 2023, when 140 nodes were installed in the SFV. Our results show the deep Sylmar sub-basin, the San Fernando sub-basin, and the Leadwell high found in a previous study (Juárez-Zúñiga and Persaud, 2025), and our results also show good agreement with the industry seismic reflection profiles across the valley. This method demonstrates how to incorporate gravity with lateral density variations into receiver function interpretation to better map interfaces in the subsurface.

2026-01-05T21:59:11Z Submitted to JGR: Solid Earth See SuppInfo_SFV_compressed.pdf for supplementary information Valeria Villa Robert W. Clayton Patricia Persaud