https://arxiv.org/api/yTfwG5JfE38S6aK/QWEcGPfAMLY 2026-04-11T12:50:03Z 8563 270 15 http://arxiv.org/abs/2601.10858v1 2026-01-15T21:14:41Z

Sea ice mechanical properties are involved in dynamical processes acting from the scale of meters to several hundred kilometers. The current rapid changes in the state of polar sea ice require a better understanding and modeling of these processes and, therefore, accurate measurements of properties including sea ice thickness, density, Young's modulus and Poisson's ratio. These properties can be measured by tracking the propagation of elastic waves within the ice. Recent technological advances have enabled the use of fiber-optic cables as cost-effective, dense seismic arrays. Once connected to an interrogator unit and mechanically coupled to a medium, here the ice cover, these cables can monitor strain field propagation, using a technique called Distributed Acoustic Sensing (DAS). In this work, we describe the use of such an array of sensors in the coastal ice of the St. Lawrence Estuary, Canada, where a 600 m long optical fiber was deployed across three different morphological sea ice conditions. During hour-long recordings, we measured the propagation of both multi-modal seismic signals generated by active sources and hydro-elastic swell. We computed dispersion curves of active signals and used Continuous Wavelet Transform (CWT) to observe the evolution of swell characteristics in the different ice areas. The dispersion curves were successfully inverted to measure the spatial evolution of ice thickness, and Young's and flexural rigidity in each of these areas. We observed ice thicknesses from 25 cm to 68 cm and Young's modulus values between 4.5 GPa and 5.7 GPa, in good agreement with values derived from collocated geophone arrays and drill hole thickness measurements. DAS systems therefore appear to be effective in evaluating heterogeneous sea ice mechanical properties and thus sea ice formation history and dynamics.

2026-01-15T21:14:41Z Sébastien Kuchly Ludovic Moreau Vasco Zanchi Nicolas Mokus Véronique Dansereau Madison M. Smith Dany Dumont Stéphane Perrard Antonin Eddi http://arxiv.org/abs/2508.16621v2 2026-01-15T19:55:49Z

Geological parameterization procedures entail the mapping of a high-dimensional geomodel to a low-dimensional latent variable. These parameterizations can be very useful for history matching because the number of variables to be calibrated is greatly reduced, and the mapping can be constructed such that geological realism is automatically preserved. In this work, a parameterization method based on generative latent diffusion models (LDMs) is developed for 3D channel-levee-mud systems. Geomodels with variable scenario parameters, specifically mud fraction, channel orientation, and channel width, are considered. A perceptual loss term is included during training to improve geological realism. For any set of scenario parameters, an (essentially) infinite number of realizations can be generated, so our LDM parameterizes over a very wide model space. New realizations constructed using the LDM procedure are shown to closely resemble reference geomodels, both visually and in terms of one- and two-point spatial statistics. Flow response distributions, for a specified set of injection and production wells, are also shown to be in close agreement between the two sets of models. The parameterization method is applied for ensemble-based history matching, with model updates performed in the LDM latent space, for cases involving geological scenario uncertainty. For three synthetic true models corresponding to different geological scenarios, we observe clear uncertainty reduction in both production forecasts and geological scenario parameters. The overall method is additionally shown to provide posterior geomodels consistent with the synthetic true model in each case.

2025-08-14T03:40:35Z Text and Figures updated to reflect the journal version of the paper Guido Di Federico Louis J. Durlofsky 10.1007/s11004-025-10245-x http://arxiv.org/abs/2504.19784v2 2026-01-15T17:55:13Z

Olivine comprises approximately 70 $\%$ by volume of the Earth's upper mantle, making it likely that it controls the mechanical, electrical and seismic properties of the upper mantle. All rocks are composed of crystals separated by grain boundaries, which affect their overall conductivity, strength and viscosity. Here, we present a study of forsterite (Mg$_{2}$SiO$_{4}$) polycrystals synthesised between 1150 $^{\circ}$C and 1390 $^{\circ}$C to obtain samples with different grain sizes. The grain boundary plane distributions (GBPD) were analysed by SEM and EBSD. A reversible change in the GBPD is observed between 1290 $^{\circ}$C and 1390 $^{\circ}$C. The GBPD shows that the most commonly occurring grain boundary planes are {0kl}-type at 1290 $^{\circ}$C and below, while at 1390 $^{\circ}$C, (010) grain boundary planes dominate the average crystal habitus. The least common planes at all temperatures are (100). This reversible transition in the dominant grain boundary plane type is evidence for a temperature-dependent complexion transition occurring between 1290 $^{\circ}$C and 1390 $^{\circ}$C. It is well established that different grain boundary crystallographies are related to different grain boundary properties. We relate the observed grain boundary complexion transition to differences in grain boundary properties observed in previous studies and suggest their influence on bulk rock properties.

2025-04-28T13:28:20Z 15 pages, 5 figures, for submission Alexandra C. Austin Sanae Koizumi Martin Folwarczny David P. Dobson Katharina Marquardt http://arxiv.org/abs/2601.10284v1 2026-01-15T11:00:51Z

Data-driven deep learning is considered a promising solution for ground-penetrating radar (GPR) full-waveform inversion (FWI), while its generalization ability is limited due to the heavy reliance on abundant labeled samples. In contrast, Deep unfolding network (DUN) usually exhibits better generalization by integrating model-driven and data-driven approaches, yet its application to GPR FWI remains challenging due to the high computational cost associated with forward simulations. In this paper, we integrate a deep learning-based (DL-based) forward solver within an unfolding framework to form a fully neural-network-based architecture, UA-Net, for GPR FWI. The forward solver rapidly predicts B-scans given permittivity and conductivity models and enables automatic differentiation to compute gradients for inversion. In the inversion stage, an optimization process based on the Alternating Direction Method of Multipliers (ADMM) is unfolded into a multi-stage network with three interconnected modules: data fitting, regularization, and multiplier update. Specifically, the regularization module is trained end-to-end for adaptive learning of sparse target features. Experimental results demonstrate that UA-Net outperforms classical FWI and data-driven methods in reconstruction accuracy. Moreover, by employing transfer learning to fine-tune the network, UA-Net can be effectively applied to field data and produce reliable results.

2026-01-15T11:00:51Z 13 pages, 13 figures. Preprint Huilin Zhou Xin Liu Kexiang Wang Shufan Hu http://arxiv.org/abs/2510.10107v2 2026-01-15T03:10:06Z

The measurement of Earth's free oscillations plays an important role in studying the Earth's large-scale structure. Space technology development presents a potential method to observe these normal modes by measuring inter-satellite distances. However, the disturbance from the Earth's low-degree gravity field makes it challenging for low Earth orbit gravity measurement satellites such as Gravity Recovery and Climate Experiment (GRACE) and TianQin-2 to extract signals from Earth's free oscillations directly. Here, we propose that by taking advantage of the high Earth orbit, the TianQin satellites can effectively avoid this disturbance, enabling direct measurement of Earth's free oscillations. We derive an analytical waveform to describe the response of Earth's free oscillations in TianQin. Based on this waveform, we use Bayesian analysis to extract the normal modes from numerical simulation data and perform parameter estimation. Our findings reveal that for a magnitude 7.9, Wenchuan-like earthquake, the resulting free oscillations will generate a signal that signal-to-noise ratio (SNR) is 73 in TianQin, and approximately 9 different modes can be distinguished. This result shows TianQin can open a new window to examine the Earth's free oscillations and study the Earth's interior and earthquakes independently from ground-based gravity measurement.

2025-10-11T08:36:47Z Accepted for publication in Space: Science & Technology Yuxin Yang Kun Liu Xuefeng Zhang Yi-Ming Hu 10.34133/space.0369 http://arxiv.org/abs/2601.09827v1 2026-01-14T19:41:07Z

Most methodologies for materials criticality assessment score supply risk and societal importance. Market-based criteria offer quantitative measures for assessment. Here we develop a statistical approach based on a geologic entropy function in which flexible constraints, such as economic, national security related, or regulatory, can be applied. As an example, the formulation describes the relation between elemental price and crustal abundance for selected elements, both important to supply risk. The method may be applicable to parameters resulting from collective decisions exhibiting a highly peaked probability distribution.

2026-01-14T19:41:07Z 8 pages, 2 figures Alan J. Hurd http://arxiv.org/abs/2601.09335v1 2026-01-14T10:10:50Z

Geological earthquake records are important for probabilistic seismic risk assessment. Such records can be obtained from studies of turbidites triggered by seismic activity in marine and lake basins. The Sea of Marmara (SoM), located on the North Anatolian Fault (NAF), serves as an important laboratory for subaqueous palaeoseismological research. This is because it has 2500 yrs. of historical earthquake records that can be correlated with radiometrically dated sedimentary earthquake records. Additionally, the relatively high sedimentation rate ($\sim$3 mm/yr) in the deep subbasins allows the recognition of individual events. Following the destructive 1912 Mw 7.4 Şarköy-Mürefte and 1999 Mw 7.4 Izmit and Mw 7.2 Düzce earthquakes, the main submerged part of the NAF in the SoM represents a seismic gap, where the long-term earthquake history is of crucial importance for earthquake risk assessment. We have studied nine cores recovered along the most active northern strand of the NAF (i.e. the Main Marmara Fault: MMF), using high resolution digital X-ray radiography, $μ$-XRF core scanning, MSCL physical properties and grain-size analyses. The chronology was determined using accelerated mass spectrometry (AMS) radiocarbon and radionuclide methods. In the cores, coseismic turbidites commonly consist of a basal part with multiple sand-silt laminae above a sharp and often erosional base and an overlying graded mud part (homogenite). The basal parts exhibit high gamma density and MS, and are often enriched in one or more elements, such as Si, K, Fe, Ti, Zr, Ca and Sr, indicative of coarse siliciclastic and carbonate shell fragments. Radionuclide- and radiocarbon-dated coseismic turbidites in different SoM subbasins extending back to more than 5000 yrs. indicate an average earthquake recurrence time between 220 and 300 yrs. along the different segments of the MMF. These results are compatible with the GPS velocities and geological slip rates. However, the intervals between two consecutive events vary widely between 50 and 695 yrs. for the different northern NAF segments. Integration of our results with previous studies indicates that the M > 7 events recorded are the 1999, 1509, 1296 and 740 earthquakes on the __zmit Gulf segment; the 1894, 1509, 1343, 1090 and 740 earthquakes on the Prince Islands segment in the Çınarcık Basin; the 1894, 1766, 1509, 989, 869 or 862, 740 and 447 earthquakes on the Central High segment and in the Central Basin; and the 1912, 1766, 1344, 989 and 447 earthquakes on the western Marmara segment. The 1912 Şarköy-Mürefte earthquake record is absent in the Central Basin, which suggests that the earthquake rupture did not extend beyond the western end of the Western High. The distribution of the 2500 yr-long sedimentary earthquake records matched with the historical earthquakes along the MMF indicates the common occurrence of multiple-segment ruptures, and suggests that presently, the most earthquake-prone part of the MMF is the Central High segment, located SW of Istanbul.

2026-01-14T10:10:50Z Marine Geology, 2025, 489, pp.107630 M. Namık Çağatay ITÜ Demet Biltekin ITÜ Nurettin Yakupoğlu ITÜ Emin Güngör ITÜ Nurdan Güngör ITÜ Gülsen Uçarkuş ITÜ Pierre Henry CEREGE Alina Polonia ISMAR Luca Gasperini ISMAR Celine Grall LIENSs, LDEO Dursun Acar Umut Barış Ülgen Christos Tsabaris Asen Sabuncu http://arxiv.org/abs/2601.09283v1 2026-01-14T08:43:55Z

Choosing a representative element volume (REV) from finite cylindrical $μ$CT scans becomes ambiguous when a key field variable exhibits a slow axial trend, because estimated statistics can change systematically with subvolume size and position rather than converging under simple averaging. A practical workflow is presented to size an REV under such nonstationary conditions by first suppressing axial drift/trend to obtain a residual field suitable for second-order analysis, and then selecting the smallest analysis diameter for which low-wavenumber content stabilizes within a prescribed tolerance. The approach is demonstrated on \textit{Thalassinoides}-bearing rocks, whose branching, connected burrow networks impose heterogeneity on length scales comparable to typical laboratory core diameters, making imaging-based microstructural statistics and downstream digital-rock proxies highly sensitive to the chosen subvolume. From segmented data, a scalar ``burrowsity'' field--capturing burrow-related pore spaces and infills--is defined, and axial detrending (with optional normalization) is applied to mitigate acquisition drift and nonstationary trends. Representativeness is then posed as a diameter-convergence problem on nested inscribed cylinders: the two-point covariance and its isotropic spectral counterpart $\widehat{C}$ are estimated, and the smallest diameter at which the low-wavenumber plateau becomes stable is selected. Applied to a segmented \textit{Thalassinoides} core, the method identifies a minimum analysis cylinder of approximately $D_{\mathrm{REV}}\approx 93~\mathrm{mm}$ and $H_{\mathrm{REV}}\approx 83~\mathrm{mm}$, enabling reproducible correlation-scale reporting and connectivity-sensitive property estimation.

2026-01-14T08:43:55Z Fernando Alonso-Marroquin Abdullah Alqubalee Christian Tantardini http://arxiv.org/abs/2601.08799v1 2026-01-13T18:35:09Z

At scales larger than the forcing scale, some out-of-equilibrium turbulent systems (such as hydrodynamic turbulence, wave turbulence, and nonlinear optics) exhibit a state of statistical equilibrium where energy is equipartitioned among large-scale modes, in line with the Rayleigh-Jeans spectrum. Key open questions now pertain to either the emergence, decay, collapse, or other nonstationary evolutions from this state. Here, we experimentally investigate the free decay of large-scale hydroelastic turbulent waves, initially in a regime of statistical equilibrium. Using space- and time-resolved measurements, we show that the total energy of these large-scale tensional waves decays as a power law in time. We derive an energy decay law from the theoretical initial equilibrium spectrum and the linear viscous damping, as no net energy flux is carried. Our prediction then shows a good agreement with experimental data over nearly two decades in time, for various initial effective temperatures of the statistical equilibrium state. We further identify the dissipation mechanism and confirm it experimentally. Our approach could be applied to other decaying turbulence systems, with the large scales initially in statistical equilibrium.

2026-01-13T18:35:09Z in press in Journal of Fluid Mechanics J. Fluid Mech. 1029 (2026) A23 Marlone Vernet Eric Falcon 10.1017/jfm.2026.11167 http://arxiv.org/abs/2505.00880v2 2026-01-13T17:27:40Z

At visible wavelengths, Venus appears serene and pale-yellow, but since the 1920s, observers have noted high-contrast features in the ultraviolet. These features track the about 4-day superrotation of the upper cloud deck and vary widely over time and space. The identity of the UV absorber(s), active between at least 280 and 500 nm, remains unknown, as no proposed candidate fully matches all observational data. From remote observations of Venus, and accounting for light scattering by sub-micrometer droplets, we modeled the 365-455 nm absorbance per cm of the bulk liquids forming Venus's clouds. Assuming a uniform distribution in mode 1 and 2 particles across a 6 km layer below the cloud top at 65 km, we constrain the bulk absorbance with a peak at A375 nm is 2942 per cm. This extremely high absorbance implies the presence of a highly efficient absorber, for example, conjugated organics, at relatively high concentration, e.g., approx. 25 g/L for porphyrin-type pigments with molar absorption coefficient of approx. 100,000 per mole per cm. Inorganic absorbers, typically below 10,000 per mole per cm, would either need to constitute a large portion of the aerosols or still not be sufficiently light-absorbing, even in pure form. We emphasize that all candidate absorbers must be evaluated against Venus's reflectance curve using (i) known molar absorption coefficients, (ii) realistic atmospheric distributions, and (iii) appropriate particle size distributions. The upcoming Rocket Lab mission will test the hypothesis of organics in Venus's clouds.

2025-05-01T21:46:51Z Jan Spacek Yeon J. Lee Paul B. Rimmer Janusz J. Petkowski http://arxiv.org/abs/2509.02346v2 2026-01-12T15:37:38Z

In areas with limited station coverage, earthquake depth constraints are much less accurate than their latitude and longitude. Traditional travel-time-based location methods struggle to constrain depths due to imperfect station distribution and the strong trade-off between source depth and origin time. Identifying depth phases at regional distances is usually hindered by strong wave scattering, which is particularly challenging for low-magnitude events. Deep learning algorithms, capable of extracting various features from seismic waveforms, including phase arrivals, phase amplitudes, as well as phase frequency, offer promising constraints to earthquake depths. In this work, we propose a novel depth feature extraction network (named VGGDepth), which directly maps seismic waveforms to earthquake depth using three-component waveforms. The network structure is adapted from VGG16 in computer vision. It is designed to take single-station three-component waveforms as inputs and produce depths as outputs, achieving a direct mapping from waveforms to depths. Two scenarios are considered in our model development: (1) training and testing solely on the same seismic station, and (2) generalizing by training and testing on different seismic stations within a particular region. We demonstrate the efficacy of our methodology using seismic data from the 2016-2017 Central Apennines, Italy earthquake sequence. Results demonstrate that earthquake depths can be estimated from single stations with uncertainties of hundreds of meters. These uncertainties are further reduced by averaging results from multiple stations. Our method shows strong potential for earthquake depth determination, particularly for events recorded by single or sparsely distributed stations, such as historically instrumented earthquakes.

2025-09-02T14:14:23Z Wenda Li Miao Zhang http://arxiv.org/abs/2507.15390v2 2026-01-12T14:29:34Z

We present a new, variational, fully nonlinear, probabilistic ambient noise tomography method, which estimates subsurface structure and quantifies the corresponding uncertainties directly in three dimensions (3D) from inter-receiver seismic surface wave dispersion data. We use the method to invert for high resolution 3D seismic velocity models of the upper crust beneath Great Britain using seismic ambient noise data recorded around the region - a task that proved too high-dimensional and hence computationally demanding for Monte Carlo sampling to converge to a stable solution. We compare the inversion results from the new method to those obtained from two standard, indirect inversion methods, in which 2D (geographical) surface wave velocity maps and 1D (depth) shear velocity profiles are estimated in two separate, consecutive steps. The results show that the direct-3D scheme preserves better lateral continuity and produces better data fit than the two-step methods, and provides information about lateral correlations that is absent from the two-step solutions. The inversion results are consistent with large-scale geology of Great Britain, and for the first time provide seismologically-imaged evidence of the Great Glen Fault and other major tectonic faults. We therefore propose that direct-3D inversion schemes should be used where possible for surface wave inversion as they provide improved results at little additional computational cost.

2025-07-21T08:47:36Z Xuebin Zhao Lily Irvin Erica Galetti Andrew Curtis http://arxiv.org/abs/2601.07343v1 2026-01-12T09:16:08Z

We propose a mud-standoff effect correction method and a set of approximate apparent resistivity inversion methods suitable for oil-based mud micro-resistivity imaging logging. To calibrate the influence of the mud layer on electrode measurement signals, this study integrates the Open-Short calibration(OSC) method with the three-layer impedance model of the oil-based mud resistivity imager. By treating the electrode and the mud layer as an integrated whole and simulating the open/short-circuit states via the finite element method, the independent extraction of the mud layer impedance signal is achieved, and the formation impedance signal is separated from the total impedance. For fast inversion of formation resistivity, standoff thickness (mud layer thickness), and relative permittivity of formation, a resistivity consistency-constrained iterative inversion method is further proposed. In this method, the formation impedance is first converted into resistivity, and then the consistency residual of the resistivity at different frequencies is used as the objective function to invert the approximate apparent resistivity of the formation through an iterative optimization algorithm. The effectiveness of the finite element-simulated OSC method, the objective function construction scheme, and the consistency inversion method is verified through both numerical models and an example of field data.

2026-01-12T09:16:08Z Li Fengfeng Feng Zhou Wu Hongliang Zhang Hao Tian Han Liu Peng Yuan Lixin http://arxiv.org/abs/2601.06941v1 2026-01-11T15:05:27Z

Robust hydrological simulation is key for sustainable development, water management strategies, and climate change adaptation. In recent years, deep learning methods have been demonstrated to outperform mechanistic models at the task of hydrological discharge simulation. Adoption of these methods has been catalysed by the proliferation of large sample hydrology datasets, consisting of the observed discharge and meteorological drivers, along with geological and topographical catchment descriptors. Deep learning methods infer rainfall-runoff characteristics that have been shown to generalise across catchments, benefitting from the data diversity in large datasets. Despite this, application to catchments in Africa has been limited. The lack of adoption of deep learning methodologies is primarily due to sparsity or lack of the spatiotemporal observational data required to enable downstream model training. We therefore investigate the application of deep learning models, including LSTMs, for hydrological discharge simulation in the transboundary Limpopo River basin, emphasising application to data scarce regions. We conduct a number of computational experiments primarily focused on assessing the impact of varying the LSTM model input data on performance. Results confirm that data constraints remain the largest obstacle to deep learning applications across African river basins. We further outline the impact of human influence on data-driven modelling which is a commonly overlooked aspect of data-driven large-sample hydrology approaches and investigate solutions for model adaptation under smaller datasets. Additionally, we include recommendations for future efforts towards seasonal hydrological discharge prediction and direct comparison or inclusion of SWAT model outputs, as well as architectural improvements.

2026-01-11T15:05:27Z 14 pages, 6 figures, 2 tables James Tlhomole Edoardo Borgomeo Karthikeyan Matheswaran Mariangel Garcia Andarcia http://arxiv.org/abs/2508.09440v2 2026-01-11T02:59:11Z

This study examines the relationship between upward negative stepped leader pulses in upward positive lightning and preliminary breakdown pulses (PBPs) in downward negative lightning discharges. Through analysis of simultaneous channel-base current and electric field data from the Säntis tower in Switzerland, we found notable similarities between the "Category A" and "B" pulses associated with the initial continuous current of upward negative leaders, and the "Classical" and "Narrow" PBPs observed in downward negative flashes. Statistical comparisons reveal correlations between electric field and current parameters for Category A pulses, supporting the field-current relationship for preliminary breakdown proposed in previous studies. These results suggest that similar physical processes may be involved in the early stages of negative leader development in both upward and downward lightning, providing valuable insights into lightning initiation that could not be obtained from conventional field measurements alone. Furthermore, high-speed camera footage revealed that Category B pulses can be produced by a downward-propagating recoil leader. As a whole, these findings demonstrate that detailed observations of upward lightning can offer valuable insight into the complex processes underlying lightning initiation and propagation.

2025-08-13T02:40:52Z 22 pages, 8 figures, submitted to Nature Scientific Reports Toma Oregel-Chaumont Mohammad Azadifar Antonio Šunjerga Marcos Rubinstein Farhad Rachidi