The Role of Source Geometry and Atmospheric Propagation in Global Bolide Infrasound Detectability

2026-06-05T09:00:29Z

Global infrasound monitoring provides a persistent means of detecting energetic bolide atmospheric entries, complementing optical observations and extending coverage over remote regions. We present a global assessment of the physical factors governing bolide infrasound detectability by correlating 623 bolide events reported by the Center for Near-Earth Object Studies between 2007 and 2025 with waveform data from the International Monitoring System. We identify 311 events with confirmed infrasound detections, corresponding to a detection rate of approximately 50%, substantially higher than inferred from earlier surveys, reflecting both the maturation of the global infrasound network and advances in automated, multi-frequency array processing. Analysis of flight parameters shows that infrasound detectability is selective rather than uniform across the bolide population. Detected events are preferentially associated with steeper entry angles and lower-altitude energy deposition, while shallow, high-altitude trajectories are less consistently observed. Very high-energy events remain detectable regardless of geometry, but for the more common lower-energy regime, observability depends on specific combinations of entry parameters and propagation conditions. This geometric dependence persists across comparable energy ranges and atmospheric conditions, indicating that entry angle exerts a primary control on detectability, with energy and propagation acting as secondary modulating factors. These results provide new physical constraints on bolide-atmosphere interactions and improve interpretation of global infrasound observations for planetary defense and atmospheric-entry studies.

Wave propagation and scattering in time dependent media: Lippmann-Schwinger equations, multiple scattering theory, Kirchhoff Helmholtz integrals, Green's functions, reciprocity theorems and Huygens' principle

2026-06-05T08:01:51Z

Wave scattering plays a central role for the modeling of complex wave propagation across all corners of science and engineering applications, including electromagnetic, acoustics, seismic and scattering physics. Wave control using time interfaces, where the properties of the medium through with the wave travels rapidly change in time, has opened further opportunities to control wave propagation in both space and time. For acoustic waves, studies on time modulated media have not been reported. In this context, full numerical solution of the wave equation using time interfaces is key to fully understand their potential. When applying time interfaces, the underlying physics of acoustic wave propagation and scattering and their similar roles on time and space, are still being explored. In this work, we introduce a mathematical formulation of the Lippmann-Schwinger integral equations for acoustic wave scattering when time interfaces are induced via a change of the velocity of the medium. We demonstrate that space-time duality for acoustic wave propagation with time interfaces and derive the Lippmann-Schwinger integral equations for wave scattering in time-dependent media, multiple scattering theory, Kirchhoff Helmholtz integrals, Green's functions, reciprocity theorems. We experimentally verify our theoretical derivation by studying and measuring the acoustic wave scattering in strongly scattering media. We illustrate the proposed framework and present results of acoustic wave scattering without prior knowledge of the background wave-fields. This improves the understanding of the generation and wave scattering and opens previously inaccessible research directions, potentially facilitating practical applications for acoustic, geophysical and optical imaging.

Learning and Inferring Multiphase Flow Dynamics in Porous Media using Scientific Machine Learning: Application to the "FluidFlower" CO2 Injection Experiment

2026-06-05T04:22:18Z

Accurate prediction and parameter identification of multiphase flow in porous media remain central challenges in geological carbon dioxide storage due to strong nonlinearities, high-dimensional parameter spaces, and limited observational data. We present a machine learning framework that integrates surrogate modeling and Bayesian inference to enable efficient forward prediction and inverse parameter estimation for CO2-brine flows in geological media. The approach is demonstrated using the "FluidFlower" experimental rig, a controlled laboratory system that provides high-resolution, time-resolved observations of CO2 migration in heterogeneous porous media. A convolutional neural network surrogate is trained on high-fidelity numerical simulations to learn the evolution of CO2 saturation and dissolved CO2 concentration fields over a wide range of multiphase flow properties. The trained surrogate is embedded within a Markov chain Monte Carlo framework for parameter inference conditioned on experimental observations. Results show that the surrogate accurately captures large-scale CO2 plume migration, dissolution dynamics, and multiphase flow behavior while providing orders-of-magnitude acceleration compared to traditional simulations. Embedding the surrogate within a Bayesian framework enables computationally tractable exploration of the parameter space and reveals both identifiable and non-identifiable parameter combinations that produce similar plume behavior. By leveraging spatially and temporally resolved full-field observations, the framework substantially improves agreement between simulations and experiments compared to previous manual calibrations based on limited plume-scale metrics. Analysis using progressively increasing observation horizons further shows that observations become more informative once the plume interacts with geological features such as faults and sealing layers.

An experimental study on the heat transport in porous media convection

2026-06-04T16:07:38Z

We investigate the heat transport in porous media convection over a wide Rayleigh--Darcy number range of $26.8\leq Ra\leq 2.62\times 10^5$, and a Darcy number range of $6.18\times10^{-7}\leq Da\leq 1.21\times 10^{-5}$. In the experiments, we employ 3D-printed lattice structures as the solid porous matrix and water as the working fluid. Quantitative analyses of the porous medium Nusselt number $Nu_m$ and local temperature statistics reveal that the present system undergoes a transition through five distinct regimes: I. Conduction, II. Convection, III. Oscillation, IV. Transition, V. Classical Rayleigh--Bénard convection. This transitional process bridges the gap between Rayleigh--Darcy-like behaviour and Rayleigh--Bénard-like behaviour in porous media convection. By varying the permeability of the matrix, we further examine the role of the Darcy number $Da$, which turns out to have a profound impact on the transitional processes across different regimes. Flow field measurements reveal that the flow structures within Regime IV and Regime V evolve from several horizontally stacked convection rolls to a single-roll structure, and the pore-scale Reynolds number both exceeds unity in these two regimes. Finally, we report the corresponding phase diagram in the $Ra$-$Da$ space.

Meltwater transport and mixing layer growth near the ice--ocean interface

2026-06-04T15:39:40Z

Ice melting into saline water plays a fundamental role in the dynamics near the ice-ocean interface in polar oceans. The physics of ice melting involves a non-trivial interplay between thermodynamics at the interface, hydrodynamic transport in the bulk and the properties of the ambient ocean. The key control parameters are the density ratio $R_ρ$ proportional to the ambient ocean salinity and the Lewis number $Le = κ_T/κ_S$, which compares the thermal and salt diffusivities. Increasing the salinity is known to slow down melting, with the melt rate transitioning from subdiffusive to diffusive as $R_ρ$ increases. Here, we ssess the role of turbulence in this transition, using highly-resolved numerical simulations of the two-dimensional Boussinesq equations with a slowly melting upper boundary. We analyse the non-stationary growth of the temperature and meltwater mixing layers, varying the Lewis number and the density ratio. While meltwater is continuously entrained by convection inside the bulk, we identify a transition from convection to diffusion close to the interface. This transition is reflected by the formation of an interfacial boundary layer that regulates the flux of meltwater pouring into the turbulent bulk for $R_ρ\gtrsim 10$. Using mixing-layer diagnostics based on meltwater-concentration thresholds, we observe that the turbulent layer grows super-diffusively $\propto t^{1.33}$, while the interfacial boundary layer expands diffusively $\propto t^{0.5}$ but with a non-universal prefactor. These results indicate that double-diffusive effects are here confined to the interface, and highlight potential limitations of diagnostics based on fixed concentration thresholds in oceanographic applications.

Investigating frictional instability due to pressurization in granular media: insights from coupled computational fluid dynamics discrete element method

2026-06-04T15:01:14Z

Fluid pressurization can reactivate subcritically stressed granular layers in faults, slopes, and injection-perturbed reservoirs, but grain-scale feedbacks among pressure diffusion, drainage, and contact-network degradation remain unresolved. Here, 3D coupled CFD-DEM simulations investigate pore-pressure-induced reactivation of confined, fluid-saturated granular shear layers under imposed shear stress. Strain-controlled tests define the Mohr-Coulomb strength envelope; stress-controlled simulations then impose subcritical shear stresses while basal pore pressure increases under drained and undrained conditions. Instability is governed not by pore pressure alone, but by its coupled evolution with effective stress, drainage, dilation or compaction, hydraulic connectivity, and granular fabric. Undrained boundaries retain excess pore pressure, whereas drained boundaries maintain vertical gradients and suppress excess pressure. Internal fields reveal alternating dilation and compaction bands and reorganization of a porosity-derived permeability proxy, showing that hydraulic pathways evolve during deformation. Micromechanical diagnostics identify localized particle rotation, force-chain reorganization, porosity redistribution, and coordination-number variations controlled mainly by imposed shear-stress level rather than drainage. Second-order fabric metrics show that post-failure weakening coincides with loss of directional force-chain organization, especially at lower shear. Friction-velocity and friction-porosity trajectories indicate a transition from dilatancy-dominated strengthening to pore-pressure-driven weakening. Viscous-number scaling partially organizes the low-Iv creeping response, 10^-8 <= Iv <= 10^-5, but not onto a unique local rheology. These results clarify how drainage-controlled hydromechanical feedbacks and fabric degradation convert pore-pressure forcing into instability.

HyFrac.fun: A 3D Hydraulic Fracturing Simulator on Cloud

2026-06-04T09:22:10Z

When multiple hydraulic fractures propagate simultaneously from a horizontal wellbore, elastic stress-shadow interactions generate complex non-planar three-dimensional geometries whose effect on subsequent reservoir drainage has infrequently been quantified, because the propagation and production solvers have historically been incompatible stand-alone tools. This paper presents HyFrac.fun, a cloud-native platform that bridges this gap by exploiting a structural isomorphism between the two SGBEM--FEM governing operator systems. The platform enables automated zero-conversion handoff of the evolved 3D fracture mesh directly to the steady-state Darcy production solver for realizing a fully integrated lifecycle simulation of multi-stage non-planar hydraulic fractures. The lifecycle analysis reveals a double shadow phenomenon: the mechanical stress shadow that suppresses inner-fracture growth during stimulation mirrors a fluid pressure shadow that reduces the inner fracture's drawout rate at small cluster spacing. Critically, switching to a shear-thinning power-law fracturing fluid leaves the fracture trajectories and production rates almost unchanged, demonstrating that stress-shadow-controlled fracture geometry instead of fluid rheology is the primary determinant of long-term production efficiency at equal injection rates. These physics findings are accessible from integrated fracture propagation and production simulations.

Multi-Condition Guided Diffusion Model for Controllable Elastic Parameter Synthesis

2026-06-04T06:24:29Z

Prestack elastic parameter inversion is important for reservoir characterization and quantitative seismic interpretation. Most existing deep-learning-based methods have achieved promising results, but they generally require sufficient labeled training data and have limited flexibility in integrating multi-source conditioning information. To address this issue, we propose a multi-condition guided diffusion model for controllable elastic parameter synthesis. Elastic parameter training datasets are first constructed based on well log statistics and geological characteristics of the target area and are used to train the diffusion model. A unified multi-condition guided diffusion framework is then developed to incorporate both implicit and explicit conditioning information. Specifically, iterative latent variable refinement, Adapter-based conditioning, and a diffusion posterior sampling (DPS)-projection guidance strategy are introduced for implicit model-domain constraints, implicit structural constraints, and explicit conditioning-operator constraints, respectively. Synthetic examples demonstrate that the proposed method can generate elastic parameter samples that are consistent with the prescribed conditions under both single-condition and multi-condition guidance. When seismic data are used as conditioning information, the framework can be further adapted to seismic elastic parameter inversion. Experiments show that the proposed method improves the prediction of representative elastic parameters, including P-wave velocity, S-wave velocity, and density, compared with baseline methods. The synthesized samples can also support downstream deep-learning-based inversion under limited labeled data, achieving competitive performance.

Preparing for the Next Carrington: Spatiotemporal Agent-Based Modeling for Safeguarding Satellite Infrastructure Under Extreme Space Weather Disturbances

2026-06-04T05:48:35Z

Extreme space weather poses an existential threat to modern satellite infrastructure, with a Carrington-class solar storm projected to cause economic losses of billions of dollars per day. Due to the rapid proliferation of satellites (with over 70,000 expected to be deployed in the next 5 years), understanding extreme space weather impacts has become essential for global economic stability and national security, and consequently, the lives of millions. However, our current vulnerability to such events remains largely unknown, and existing models rely primarily on statistical populations instead of individual satellite behavior. Through the development of a novel spatiotemporal agent-based model (ABM), this study addresses two critical research challenges: (1) predicting the impacts of extreme space weather disturbances and (2) enabling real-time maneuver guidance for satellites during such events. Utilizing 41,644 satellite records, historical records from 5 recent space weather events, and atmospheric density models, we built individual satellite agents with physics-driven behaviors that make independent decisions by dynamically responding to constraints such as propellant requirements and collision avoidance thresholds. Scenario analysis suggests that 95% of satellites in Low Earth Orbit altitudes would experience enhanced atmospheric drag of 8x baseline levels, increasing collision risks by 2-3x. Monte Carlo simulations also predict direct economic impact per affected satellite on the order of $40M. Furthermore, the model successfully uses real-time conditions to provide maneuver recommendations, with 92% accuracy. This study is thus the first to provide a prototype framework for real-time adaptive decision systems to safeguard satellites against the next Carrington-class disruption.

The relationship between atmospheric stratification and internal wave processes

2026-06-03T08:28:37Z

The atmosphere is a resonant system and its oscillation spectrum is determined by the spatial distribution of parameters. For example, the frequency of internal gravity waves depends on the vertical temperature gradient. Therefore, the study of the spectra of internal wave processes can be used to estimate the spatial distribution of atmospheric parameters. The work is aimed at detecting wave fluctuations in the atmosphere and calculating atmospheric parameters based on the measured spectra. The rate of ascent of the radiosondes was used as a reference information, which was compared with the spectra of pressure fluctuations at the surface. The stratification parameters were calculated based on the frequency of internal gravity waves and showed good agreement with the upper-air sounding data.

The landslide drag

2026-06-03T08:11:45Z

Drag is one of the most important energy dissipation mechanisms in nature, including landslides and debris flows. To satisfactorily reproduce laboratory or field data in simulating landslides, often empirical relations or convenient numerical values are used for the drag force coefficient. However, this is just a parameter calibration rather than a physical reality. Why should the drag coefficient be a constant for a dynamically evolving landslide? Which drag coefficient represents the physical reality? So, what exactly is the drag remains an open question. As the landslide is a deformable body, the drag-deformation-flow must be interconnected. Empirical drag coefficients lack important dynamical aspects. As the drag coefficient is less likely to be measurable, it must be described with some mechanical models. Yet, there exists no analytical model for the drag coefficient. Here, we postulate that the drag coefficient must be a function of the evolving landslide velocity, as it must contain information constituting the landslide acceleration in relation to the net driving acceleration. We develop an innovative, evolutionary drag coefficient that adjusts automatically during the landslide motion. The drag coefficient is described by a dimensionless acceleration number as it is regulated by the physics and dynamics of the flow. Formal derivation shows that the drag coefficient is the measure of energy inefficiency. This settles down the deliberation on the drag force in landslide dynamics, reshaping the concept of drag. Simulation results highlight the essence, mechanical strength and functionality of the proposed analytical drag as it demonstrates the inherent frictional behaviour of granular debris flows. As the dynamical drag coefficients appeared to be around the often calibrated values, the new drag potentially well reproduces natural event dynamics, but now with clear physical basis.

Correcting Neural Operator Spectral Bias via Diffusion Posterior Sampling with Sparse Observations

2026-06-02T17:26:15Z

Neural operator surrogates (NO) approximate PDE solutions orders of magnitude faster than numerical solvers, but suffer from spectral bias: high-frequency content is systematically attenuated, limiting reliability where fine-scale structure matters. Sparse sensor measurements of the field are often available too, offering pointwise accuracy without spectral distortion but covering only a small fraction of the domain. We address this by treating NO predictions as auxiliary observations in a diffusion posterior sampling framework. Our method, FreqNO-DPS (https://github.com/niccoloperrone/FreqNO-DPS), combines an unconditional score-based diffusion prior, trained on high-fidelity simulations, with diffusion posterior sampling (DPS) conditioned on sparse observations and guided by a frozen neural operator. Naive integration reintroduces the surrogate's spectral bias; we resolve this with a closed-form, spectrally shaped guidance score that weights the surrogate by its frequency-dependent accuracy and needs no denoiser backpropagation. A distribution-free analysis bounds the approximation error across the frequency-diffusion-time plane and shows the guidance's frequency dependence is preserved regardless of distributional assumptions. On 3D elastic wavefield prediction at 5% and 2% sensor coverage, the method reaches near-zero spectral bias across all bands, where both the surrogate and sensor-only DPS show systematic high-frequency attenuation. Isotropic guidance, the natural baseline, improves pointwise accuracy but carries the bias into the posterior nearly intact, confirming that frequency-dependent calibration is essential, not merely beneficial. The framework needs only paired surrogate/reference data and exploits no problem-specific structure beyond the residual's approximate spectral diagonality, verifiable for new surrogates via the coherence diagnostic we provide.

GeoVolDiff: Taming 3D Geological Volumes with Latent Diffusion

2026-06-02T12:40:06Z

Deep learning has become a prevailing paradigm across a wide range of geophysical applications. Yet most existing studies concentrate on methodological refinements -- novel network architectures, physics-informed constraints, or taskspecific loss functions -- while paying comparatively little attention to a more fundamental challenge of any data-driven approach: the availability and representativeness of high-quality training data. This limitation is especially pronounced in geophysics. Unlike computer vision, which benefits from large-scale, well-curated benchmarks such as ImageNet, comparably abundant and reliably labelled geophysical data are prohibitively expensive to acquire and, in most field settings, lack accessible ground-truth supervision. To alleviate this data deficiency, we propose GeoVolDiff, a generative framework for three-dimensional geological volumes. It comprises three coupled stages: (i) constructing a foundational training corpus through physics-based forward simulation; (ii) training a Latent Diffusion Model (LDM) to capture the statistical distribution of 3D geological structures; and (iii) synthesizing diverse, structurally plausible volumes at scale for downstream geophysical tasks. We examine the utility of the synthesized data on a representative downstream task, seismic impedance inversion. Without incorporating any additional physical or geological prior, inversion networks pre-trained exclusively on synthesized data attain competitive performance on both synthetic and field datasets, indicating that data synthesised by the generative model can serve as an effective surrogate for costly field-acquired labels.

RIFTES: An RTM- and iteration-free temperature-emissivity separation framework for accurate and efficient clear-sky land surface temperature retrieval

2026-06-02T02:03:02Z

This study proposes an RTM- and iteration-free TES (RIFTES) framework to improve both computational efficiency and retrieval accuracy of the temperature-emissivity separation (TES) algorithm for clear-sky land surface temperature (LST) retrieval. Based on physical derivations, a non-iterative TES algorithm was first developed by reformulating the original iterative procedure into a mathematically equivalent closed-form solution, thereby eliminating the need for cumbersome iterations. To further reduce error propagation risks and computational burdens, a deep residual neural network that integrates atmospheric radiative transfer physics was adopted to conduct atmospheric correction using easily accessible parameters, with a masking mechanism introduced to flexibly incorporate atmospheric constraints when available. Comprehensive validations demonstrate the effectiveness of the proposed algorithm. Simulation results show that RIFTES remains robust to input uncertainties and achieves the lowest root mean squared error (RMSE) of 1.06 K among representative existing algorithms, including split-window (SW), TES, and SW-TES hybrid methods. In-situ measurements from globally distributed sites were then used to evaluate the practical performance of RIFTES when applied to both the ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) and the Advanced Baseline Imager (ABI). The new algorithm achieves RMSE values of 1.51 K and 1.97 K for ECOSTRESS and ABI, respectively, reducing retrieval uncertainties by up to 24% and 32% compared with existing methods. Furthermore, by simplifying both the iterative procedure and atmospheric correction, RIFTES reduces the overall computational time by 74.0% and 62.5% compared with the TES and hybrid algorithms, respectively.

Data-Driven Forecasting of three-Component Seismograms Using Transformer Architectures

2026-06-01T21:38:03Z

Forecasting seismic waveforms beyond observed data remains challenging due to the nonlinear, dispersive, and multi-scale nature of seismic wave propagation. In this work, we introduce \textsc{SeismoGPT}, a transformer-based autoregressive model designed to forecast three-component seismic waveforms directly in the time domain. Forecasting is formulated as a physically constrained continuation problem in which the model receives waveform context beginning at the P-wave arrival and extending a defined time beyond the S-wave arrival, after which future motion is generated recursively without access to ground-truth samples. Evaluation is performed on synthetic seismograms spanning source depths of 5--100\,km, epicentral distances of 10--90$^\circ$, and magnitudes $3 \leq M_w \leq 7$. To disentangle the effects of context length and prediction horizon, we define three evaluation configurations using a distance-normalized context ratio and fixed prediction horizons of 120 and 240\,s. Across all configurations, the model achieves median normalized cross correlation above 0.93. Analysis of representative forecasts shows that successful predictions preserve both phase coherence and spectral energy distribution. Where failure cases arise, this is primarily due to gradual phase drift during autoregressive rollout rather than unphysical signal generation. These results demonstrate that transformer-based sequence models can learn stable dynamical continuation of seismic wavefields, highlighting the potential of foundation-model approaches for physics-driven time-series forecasting. There are potential applications of this methodology in seismic warning and hazard mitigation, particularly for next-generation gravitational-wave observatories, such as the Einstein Telescope.