https://arxiv.org/api/CFnwCVLXA3X5TL7L/IGA3y3nSFs2026-04-01T10:33:36Z853712015http://arxiv.org/abs/2603.01159v1Temperature dependence of broadband seismometer sensitivity2026-03-01T15:50:38ZBroadband seismometers are widely used in global observation networks deployed for geophysics research. Recently, the calibration of their sensitivity has become an important factor for ensuring observation accuracy. One of the limiting factors of calibration uncertainty is the temperature dependence of the sensitivity because seismometers operate in a wide range of temperatures. However, systems that accurately measure the temperature coefficient in seismometers have not been established. Herein, we develop such a system using a triaxial vibration exciter combined with a thermostatic chamber. Using this system, we calibrated several broadband seismometers (Trillium Compact, Trillium Horizon 360, and CMG-3T) at various temperatures, ranging from $-15 ^\circ$C to $+45 ^\circ$C. We found that the temperature coefficient was $(0.11\pm0.01)$ %/$^\circ$C, which can be attributed to the internal magnet of the seismometers. The variation of the phase delay corresponded to a change of less than 2 ms in output time delay. Additionally, we found that the relative frequency response below 1 Hz was stable against temperature variations. These values are useful for evaluating the measurement accuracy of seismometer observation networks.2026-03-01T15:50:38ZTomofumi ShimodaWataru KokuyamaHideaki Nozatohttp://arxiv.org/abs/2603.03363v1Superhydrophobic Sand Mulch Shifts Soil Evaporation from Temperature-Controlled to Diffusion-Limited Regimes2026-03-01T14:22:15ZIn hot arid and semi-arid regions, substantial irrigation water is lost through surface evaporation under intense solar irradiation and high temperatures, limiting freshwater sustainability and crop productivity. Superhydrophobic Sand (SHS) mulch, a plastic-free, bio-inspired technology, has been proposed as a dry diffusion barrier to suppress evaporative losses. Here, we combine controlled column experiments with heat and mass transfer modeling to quantify how SHS thickness and soil properties govern evaporation under fixed irradiation. Relative to unmulched controls, a 5 mm SHS layer reduced evaporative flux by 65$\%$ in fine sand and 63$\%$ in coarse sand, while a 10 mm layer reduced flux by 83$\%$ and 70$\%$, respectively. Notably, soil-type trends reversed after mulching: although unmulched fine sand exhibited 37.5$\%$ higher evaporation than coarse sand, application of a 10 mm SHS layer reduced fine-sand evaporation to 40$\%$ below that of coarse sand. To explain this counterintuitive behavior, we developed a coupled heat and vapor transport model incorporating soil thermophysical properties and diffusion through the porous mulch layer. The model accurately predicted steady-state temperature profiles and evaporation rates for both mulched and unmulched systems. Our results show that SHS mulch shifts evaporation from a surface-temperature-controlled regime to a diffusion-limited regime governed by mulch thickness and soil thermal conductivity. This mechanistic understanding clarifies the performance of SHS and supports its potential to enhance irrigation efficiency in arid agricultural and landscaping applications.2026-03-01T14:22:15Z13 pages, 7 figures, and 1 ESIAmr Al-Zu'biMuhammad Subkhi SadullahJiaqi ZhengLisa ExpositoAdair GalloHimanshu Mishrahttp://arxiv.org/abs/2512.06407v2Toward Trustworthy Earthquake Catalogs in the Era of Automated Detection: A Probabilistic Framework for Robust Earthquake Location2026-03-01T10:52:30ZThe rapid proliferation of deep-learning-based detection and association methods has greatly expanded automatically generated earthquake catalogs, but has also introduced false detections, mis-associated arrivals, and poorly constrained events, making rigorous uncertainty quantification essential.
We present a fully probabilistic earthquake location framework that jointly infers hypocenters, origin times, phase-dependent noise scales, and contamination levels within a unified Bayesian formulation. Robustness is achieved through a two-level hierarchical strategy: arrival-time residuals are modeled using a Student-$t$ scale-mixture to accommodate heavy-tailed noise, while an explicit two-component contamination model probabilistically classifies each phase pick as an inlier or outlier, with phase-specific contamination rates inferred from the data. This formulation avoids heuristic data rejection and manual thresholding.
Posterior sampling is accelerated using a neural-network travel-time surrogate, enabling scalable inference for large catalogs. Synthetic tests demonstrate well-calibrated posterior uncertainties, and application to the 2022 Luding $M_s$~6.8 aftershock sequence shows that uncertainty-based screening reduces the catalog from 10{,}590 to 6{,}562 events without loss of recall.
This framework provides a principled pathway toward statistically trustworthy earthquake catalogs in the era of automated seismic monitoring.2025-12-06T11:56:55Z34pagesZiye YuJinqing SunYuqi CaiZemin LiuPingping WuXin LiuJiayan Tanhttp://arxiv.org/abs/2603.03360v1High Resolution Microscopy and Raman Spectroscopic Studies on the Freshest Mukundpura Meteorite, Rajasthan, India: Presence of Nanodiamond2026-02-28T10:19:02ZCarbonaceous Chondrites have special significance in the stellar evolution and in particular in the evolution of life on earth. The carbonaceous meteorite that fell in Mukundpura village, Jaipur, Rajasthan on 6th June 2017 is one such rare CM2 (Carbonaceous Chondrite) carbonaceous meteorite. We carried out high resolution scanning and transmission electron microscopic (TEM) studies on typical thin sections, showing abundant grains of iridium (Ir), pentlandite (NiS), and more interestingly crystalline carbon (C). These crystallite carbon grains resemble nanodiamond like signature in the freshest Mukundpura meteorite. The high-resolution Raman spectroscopic measurements are carried out on the crystalline carbon grains, showing well resolved three distinct peaks with a vibrational mode at 1315 cm-1, with the onset of a weak vibrational mode at 1150 cm^-1, substantiating the observation of nanocrystalline diamond in Mukundpura meteorite. The broad peak centered at 1360 cm^-1 and 1575 cm^-1 (as an average), suggest the presence of graphitic carbon as well together with apparent presence of nanocrystalline diamond. The average size of nanocrystalline diamond is ~ 3-5 nm. High iridium content in this meteorite supports the meteoric impact related iridium anomaly in geological stratigraphic boundaries (e.g.Cretaceous-Tertiary boundary) that has caused mass extinction of flora and fauna.2026-02-28T10:19:02Z17 Pages, 11 Figures, Accepted for Publication in Bull. Min. Res. Exp. (2024)Bull. Min. Res. Exp. (2024)D. ChandrasekharamU. GovindR. P. TripathiT. H. AmirK. M. SairamD. B. E. RafalA. Dixithttp://arxiv.org/abs/2603.00570v1Physics-Based Seismic Hazard and Risk Assessment: A New Paradigm for Earthquake Forecasting2026-02-28T09:37:31ZEpistemic uncertainty in probabilistic seismic hazard assessment (PSHA) is commonly addressed through a logic-tree framework that combines weighted alternative models to characterize the range of plausible hazard outcomes. Implicit in this approach is a critical assumption: that the available model class provides an adequate representation of the underlying physics governing fault networks. Yet current formulations remain highly simplified, neglecting nonlinear interactions, diverse fault slip modes, multi-scale coupling, and the emergent dynamics that govern the nucleation and evolution of large earthquakes. As a result, the standard treatment of epistemic uncertainty may introduce systematic hazard bias and substantially underestimate forecast uncertainty. To formalize this limitation, we introduce SHARP (Seismic Hazard Assessment and Risks with Physics), a new framework that shifts the focus from selecting among imperfect models to quantifying their collective distance from physical and observational constraints. Central to SHARP is the Model Adequacy Distance (MAD), a quantitative metric of model inadequacy. MAD combines (i) a moment-weighted scoring function scaling with seismic moment to reflect the disproportionate social and economic impact of large events and (ii) compatibility measures derived from geodetic observations and statistical properties of seismicity. We illustrate the approach with an application to the frequency-magnitude distribution of Southern California seismicity. SHARP establishes a rigorous foundation for moving beyond conventional epistemic uncertainty toward a physics-grounded framework for seismic hazard and risk assessment.2026-02-28T09:37:31Z16 pages, 5 figuresDavide ZaccagninoDidier Sornettehttp://arxiv.org/abs/2603.00393v1Dual-space posterior sampling for Bayesian inference in constrained inverse problems2026-02-28T00:34:31ZInverse problems constrained by partial differential equations are often ill-conditioned due to noisy and incomplete data or inherent non-uniqueness. A prominent example is full waveform inversion, which estimates Earth's subsurface properties by fitting seismic measurements subject to the wave equation, where ill-conditioning is inherent to noisy, band-limited, finite-aperture data and shadow zones. Casting the inverse problem into a Bayesian framework allows for a more comprehensive description of its solution, where instead of a single estimate, the posterior distribution characterizes non-uniqueness and can be sampled to quantify uncertainty. However, no clear procedure exists for translating hard physical constraints, such as the wave equation, into prior distributions amenable to existing sampling techniques. To address this, we perform posterior sampling in the dual space using an augmented Lagrangian formulation, which translates hard constraints into penalties amenable to sampling algorithms while ensuring their exact satisfaction. We achieve this by seamlessly integrating the alternating direction method of multipliers (ADMM) with Stein variational gradient descent (SVGD) -- a particle-based sampler -- where the constraint is relaxed at each iteration and multiplier updates progressively enforce satisfaction. This enables constrained posterior sampling while inheriting the favorable conditioning properties of dual-space solvers, where partial constraint relaxation allows productive updates even when the current model is far from the true solution. We validate the method on a stylized Rosenbrock conditional inference problem and on frequency-domain full waveform inversion for a Gaussian anomaly model and the Marmousi~II benchmark, demonstrating well-calibrated uncertainty estimates and posterior contraction with increasing data coverage.2026-02-28T00:34:31ZAli SiahkoohiKamal AghazadeAli Gholamihttp://arxiv.org/abs/2603.00383v1A divide-and-conquer strategy for fast elastodynamic simulation of earthquakes and aseismic slip on fault networks2026-02-27T23:51:36ZSimulating long-term, fully dynamic sequences of earthquakes and aseismic slip (SEAS) on geometrically complex fault networks remains computationally demanding due to the cost of resolving elastodynamic interactions. Although high-performance computing improves feasibility, simulations remain expensive, particularly for multicycle evolution, motivating the widespread use of quasi-dynamic approximations based on radiation damping. Here we present an efficient numerical framework for fully elastodynamic SEAS simulations on complex fault networks. The method adopts a divide-and-conquer strategy in which elastodynamic self-effects and fault-to-fault interactions are treated separately using boundary integral formulations tailored to each interaction type. Self-interactions along planar faults are computed using a non-replicating spectral boundary integral formulation that eliminates periodic-image artifacts, while interactions between arbitrarily oriented faults are evaluated through a fully dynamic space-time boundary integral representation accelerated by hierarchical matrices (H-matrices). A key advance is a selective H-matrix compression strategy based on fault-wise assembly of independent binary trees, enabling low-rank approximation of long-range interactions while preserving near-field accuracy and excluding self-effects from the hierarchical structure. Additional efficiency arises from physics-informed truncation of elastodynamic histories using mode-dependent time windows and causality-based kernel truncation. Benchmark multi-fault simulations validate accuracy against reference uncompressed solutions. The method reduces interaction complexity from O(N^3) to O(N^2 log N), yielding up to three orders of magnitude speedup and an order-of-magnitude memory reduction for typical problem sizes (~3e10 degrees of freedom), enabling fully dynamic SEAS simulations on workstation hardware.2026-02-27T23:51:36ZFederico CiardoPierre Romanethttp://arxiv.org/abs/2504.16009v2Upscaling the Navier-Stokes-Cahn-Hilliard model for incompressible multiphase flow in inhomogeneous porous media2026-02-27T16:14:42ZThis work presents a macroscopic model for the flow of two immiscible and incompressible fluids within inhomogeneous porous media. At the pore scale, the flow is governed by the full Navier-Stokes equations
while the phase interface evolution is described by the Cahn-Hilliard equation. Applying the volume averaging method, we rigorously derive upscaled equations that characterize the Darcy-scale behavior of
the two-phase system. The derivation yields unclosed terms originating from spatial derivations, which are subsequently closed by modeling them as functions of averaged quantities and specific transport coefficients. These coefficients are evaluated by solving localized closure problems defined on representative elementary volumes (REVs). A key contribution of this study is the formal incorporation of wetting behavior
into the averaged chemical potential. We further discuss the theoretical distinctions between the proposed framework and standard empirical two-phase Darcy models. Finally,
numerical simulations of the upscaled equations are performed, demonstrating the model's capability to capture essential two-phase flow characteristics in porous media.2025-04-22T16:16:19Z26 pages,8 figuresChunhua ZhangPeiyao LiuCheng PengLian-Ping WangZhaoli Guohttp://arxiv.org/abs/2603.00214v1Agentic Scientific Simulation: Execution-Grounded Model Construction and Reconstruction2026-02-27T15:42:05ZLLM agents are increasingly used for code generation, but physics-based simulation poses a deeper challenge: natural-language descriptions of simulation models are inherently underspecified, and different admissible resolutions of implicit choices produce physically valid but scientifically distinct configurations. Without explicit detection and resolution of these ambiguities, neither the correctness of the result nor its reproducibility from the original description can be assured.
This paper investigates agentic scientific simulation, where model construction is organized as an execution-grounded interpret-act-validate loop and the simulator serves as the authoritative arbiter of physical validity rather than merely a runtime. We present JutulGPT, a reference implementation built on the fully differentiable Julia-based reservoir simulator JutulDarcy. The agent combines structured retrieval of documentation and examples with code synthesis, static analysis, execution, and systematic interpretation of solver diagnostics. Underspecified modelling choices are detected explicitly and resolved either autonomously (with logged assumptions) or through targeted user queries.
The results demonstrate that agent-mediated model construction can be grounded in simulator validation, while also revealing a structural limitation: choices resolved tacitly through simulator defaults are invisible to the assumption log and to any downstream representation. A secondary experiment with autonomous reconstruction of a reference model from progressively abstract textual descriptions shows that reconstruction variability exposes latent degrees of freedom in simulation descriptions and provides a practical methodology for auditing reproducibility. All code, prompts, and agent logs are publicly available.2026-02-27T15:42:05ZKnut-Andreas LieOlav MøynerElling SveeJakob Torbenhttp://arxiv.org/abs/2603.03351v1Prediction of Extreme Events in Multiscale Simulations of Geophysical Turbulence using Reinforcement Learning2026-02-26T17:17:03ZAccurate subgrid-scale closures are essential for weather/climate models, where predicting extreme events is critical. Traditional closures have structural errors, e.g., producing excessive diffusion that dampens extremes. Artificial intelligence has gained attention for closure modeling, but the prediction of extreme events remains challenging. Supervised offline learning needs abundant high-fidelity training data and can lead to instabilities. Online learning algorithms are emerging as an alternative, but reliance on differentiable numerical solvers or scalable optimizers hinders broad use. Here, we introduce SMARL to develop closures for canonical prototypes of atmospheric/oceanic turbulence, using only the enstrophy spectrum, estimated from a few high-fidelity samples, as reward. This reward ensures that the model captures the cascades of scales in these simulations. These online-learned closures enable stable simulations, with up to five orders of magnitude fewer degrees of freedom, that reproduce high-fidelity simulation statistics and capture in particular extremes. We interpret the closures by analyzing the SMARL policy and demonstrate generalization to other flows. The results highlight SMARL as a potent tool for developing closures capable of capturing extremes in atmospheric/oceanic flows, opening new capabilities for effective climate modeling.2026-02-26T17:17:03Z21 pages; 8 figuresYifei GuanLucas AmoudruzSergey LitvinovKaran JakharRambod MojganiPetros KoumoutsakosPedram Hassanzadehhttp://arxiv.org/abs/2511.01536v2Unsupervised Posterior Sampling for Seismic Data Recovery via Score-Based Generative Priors2026-02-26T07:03:18ZSeismic data restoration is a fundamental task in seismic exploration, yet remains challenging under complex and unknown degradations. Traditional model-driven or task-specific learning methods often require retraining for each degradation type and fail to generalize effectively to unseen field data. In this work, we introduce an unsupervised Posterior Sampling Framework (PSF) built upon Score-based Generative Models (SGMs) for unified seismic data restoration. PSF leverages the pre-trained unconditional SGMs as a seismic-aware generative prior and derives a generalized conditional score function associated with the forward operator of each inverse problem. This enables posterior sampling across different seismic restoration tasks without retraining or supervision. Additionally, an adaptive noise-level estimation mechanism is incorporated to dynamically regulate the noise suppression strength during sampling, enhancing flexibility under varying signal-to-noise ratios and degradation conditions.Extensive experiments on seismic denoising, interpolation, compressed sensing, and deconvolution demonstrate that PSF delivers high-quality samples and exhibits robust generalization to out-of-distribution data. These results highlight the potential of SGMs as a universal prior for seismic inverse problems and establish PSF as a flexible framework for unsupervised posterior inference across diverse degradation scenarios.2025-11-03T12:58:13Z17 Pages, 13 figuresChuangji MengJinghuai GaoZongben Xuhttp://arxiv.org/abs/2602.22460v1Mimicking the earth core conditions with ultrafast laser materials interaction2026-02-25T22:49:56ZUltrafast lasers create extreme, non-equilibrium thermodynamic conditions that can transiently reach pressures and temperatures comparable to interior core of the earth. Here we show that femtosecond excitation of amorphous silica-hafnia multilayer dielectrics drives the formation of high-pressure crystalline phases of silica including stishovite, seifertite, and the pyrite-type high density structure, within confined subsurface regions.Using TEM, SAED, and 4D-STEM, we directly map nanoscale phase evolution and identify crystalline motifs embedded inside laser generated blisters.Complementary molecular dynamics simualtions reveal the thermodynamic pathway underlying these transformations, where rapid electronic pressure initiates densification and octahedral coordination, followed by temperature driven crystallization and displacive transitions during ultrafast quenching. The resulting polymorphs reflects a dual-stage pathway inaccessible under equilibrium processing. Our results establish femtosecond laser excitation as a viable route to synthesize and stabilize ultrahigh-density high pressure silica phases under ambient conditions, without a diamond anvil cell, with implications for laser-damage mechanisms, high-energy-density materials, and planetary physics.2026-02-25T22:49:56ZMohamed Yaseen NoorAram YedigaryanGabriel CalderonArshak TsaturyanElena KanchanJinwoo HwangCarmen S. MenoniJean-Philippe ColombierEnam Chowdhuryhttp://arxiv.org/abs/2602.22293v1Global River Forecasting with a Topology-Informed AI Foundation Model2026-02-25T15:23:01ZRiver systems operate as inherently interconnected continuous networks, meaning river hydrodynamic simulation ought to be a systemic process. However, widespread hydrology data scarcity often restricts data-driven forecasting to isolated predictions. To achieve systemic simulation and reduce reliance on river observations, we present GraphRiverCast (GRC), a topology-informed AI foundation model designed to simulate multivariate river hydrodynamics in global river systems. GRC is capable of operating in a "ColdStart" mode, generating predictions without relying on historical river states for initialization. In 7-day global pseudo-hindcasts, GRC-ColdStart functions as a robust standalone simulator, achieving a Nash-Sutcliffe Efficiency (NSE) of approximately 0.82 without exhibiting the significant error accumulation typical of autoregressive paradigms. Ablation studies reveal that topological encoding serves as indispensable structural information in the absence of historical states, explicitly guiding hydraulic connectivity and network-scale mass redistribution to reconstruct flow dynamics. Furthermore, when adapted locally via a pre-training and fine-tuning strategy, GRC consistently outperforms physics-based and locally-trained AI baselines. Crucially, this superiority extends from gauged reaches to full river networks, underscoring the necessity of topology encoding and physics-based pre-training. Built on a physics-aligned neural operator architecture, GRC enables rapid and cross-scale adaptive simulation, establishing a collaborative paradigm bridging global hydrodynamic knowledge with local hydrological reality.2026-02-25T15:23:01Z26 pages, 5 figures, 3 extended data tables, 3 extended data figuresHancheng RenGang ZhaoShuo WangLouise SlaterDai YamazakiShu LiuJingfang FanShibo CuiZiming YuShengyu KangDepeng ZuoDingzhi PengZongxue XuBo Panghttp://arxiv.org/abs/2602.20067v2Conservation laws, fluxes, and symmetries: lessons from a perturbative approach for self-organized turbulence2026-02-25T09:33:15ZSome turbulent flows self-organize into large-scale structures, rather than breaking up into ever-smaller scales. Underpinning this phenomenon is the existence of two sign-definite quantities which are conserved by the dynamics. Two-dimensional turbulence is a prime example, where large-scale mean flows, termed condensates, spontaneously emerge. We review a perturbative theoretical framework for the statistical description of such inhomogeneous turbulence, offering new perspectives on the role of the two conserved quantities. We illustrate the universal properties of the theory, comparing results from two-dimensional Navier-Stokes to those from the large-scale-quasi-geostrophic equation. These two models are limiting cases of the shallow water quasi-geostrophic equation, the former exhibiting long-range fluid element interactions, while the latter has local interactions. We then demonstrate these theoretical ideas in two new settings: first, in rotating three-dimensional turbulence, where two-dimensional condensates are known to form. Considering jet-type condensates, we derive the mean-flow profile and discuss a surprising symmetry breaking. Second, we vary the Rossby deformation radius in the shallow water quasi-geostrophic equation. We obtain novel domain-spanning condensates in all tested regimes and show that they follow two-dimensional Navier-Stokes for deformation radii above the forcing scale, and the large-scale quasi-geostrophic equation for those below, demonstrating the power of these asymptotic models.2026-02-23T17:22:54ZAnna FrishmanSébastien GoméAnton Svirskyhttp://arxiv.org/abs/2603.03346v1Physics-constrained symbolic regression for discovering closed-form equations of multimodal water retention curves from experimental data2026-02-24T18:48:15ZModeling the unsaturated behavior of porous materials with multimodal pore size distributions presents significant challenges, as standard hydraulic models often fail to capture their complex, multi-scale characteristics. A common workaround involves superposing unimodal retention functions, each tailored to a specific pore size range; however, this approach requires separate parameter identification for each mode, which limits interpretability and generalizability, especially in data-sparse scenarios. In this work, we introduce a fundamentally different approach: a physics-constrained machine learning framework designed for meta-modeling, enabling the automatic discovery of closed-form mathematical expressions for multimodal water retention curves directly from experimental data. Mathematical expressions are represented as binary trees and evolved via genetic programming, while physical constraints are embedded into the loss function to guide the symbolic regressor toward solutions that are physically consistent and mathematically robust. Our results demonstrate that the proposed framework can discover closed-form equations that effectively represent the water retention characteristics of porous materials with varying pore structures. To support third-party validation, application, and extension, we make the full implementation publicly available in an open-source repository.2026-02-24T18:48:15ZYejin KimHyoung Suk Suh