https://arxiv.org/api/oQfe9RVTVe096s++rnDML7tmYzk 2026-07-19T04:35:33Z 34608 90 15 http://arxiv.org/abs/2607.09552v1 2026-07-10T16:00:46Z

In this Letter, local time stepping (LTS) is incorporated into the unified gas-kinetic wave-particle (UGKWP) method for steady multiscale flow simulation. It accelerates convergence step by a factor of $3.8\times$--$20\times$ and reduces wall-clock time by up to $21\times$ relative to global time stepping (GTS). A rigorous analysis of the particle flux under LTS identifies that fixed per-cell as $Δt_i$ is a sufficient condition for the time-averaged flux balance. This condition has not been stated in prior particle-based LTS work, where $Δt_i$ varies in time and the flux balance is therefore not guaranteed. Together with proportional rescaling of particle mass and free transport time at cell interfaces, the fixed-$Δt_i$ condition yields a conservative framework with no free parameters. The UGKWP-LTS method is validated on cylinder and flat-plate benchmarks that possess multiscale flow features.

2026-07-10T16:00:46Z Wenzhi Guo Junzhe Cao Wenpei Long Kun Xu http://arxiv.org/abs/2506.11936v2 2026-07-10T14:56:32Z

Traditional rheological tools are often limited in characterizing soft materials under ultra-high strain-rate loading conditions (> 1000 s^-1) due to constraints in spatiotemporal resolution, loading rate, and invasiveness. Recently, inertial microcavitation rheometry (IMR), which utilizes laser-induced inertial cavitation (LIC) to dynamically deform surrounding materials, has emerged as a powerful experimental mechanics technique for probing nonlinear viscoelastic properties under extreme loading conditions. However, conventional IMR relies on computationally expensive iterative inverse fitting procedures, limiting its scalability and real-time applicability. Here, we introduce a new AI-enhanced experimental mechanics framework, called Bubble Dynamics Transformer (BDT), that integrates physics-based cavitation simulations with Transformer neural network architectures to achieve rapid inverse characterization of soft material viscoelasticity from experimentally measured bubble dynamics. The proposed framework directly predicts viscoelastic material parameters from time-resolved bubble radius evolution curves without iterative optimization. The BDT is trained using synthetic datasets generated from physics-based Keller--Miksis cavitation simulations and validated using experimental laser-induced cavitation data obtained from hydrogels and viscous polymer solutions. The proposed AI-driven framework demonstrates excellent agreement with our previous IMR while substantially accelerating constitutive parameter inference. Experimental demonstrations further reveal the capability of the framework to characterize rate-dependent material behavior across a wide range of soft materials, from viscous liquids to various viscoelastic hydrogels, at ultra-high strain rates.

2025-06-13T16:38:51Z Lehu Bu Zhaohan Yu Danila Frolkin Junyoung Kim Qihang Shi Jan N. Fuhg Shaoting Lin Jin Yang http://arxiv.org/abs/2603.15287v2 2026-07-10T13:06:33Z

In the study of oceanic flows at the geophysical scale, the phenomenon of density stratification plays a central role in the dynamics of the system. Two categories of mathematical models are commonly used to describe the role played by the density stratification: on the one hand, continuously stratified models - such as the stratified Euler equations in a strip, considered in the present article - offer an accurate description of vertical effects, but come with a high level of complexity, both at the theoretical and numerical levels. On the other hand, bilayer models approximate the stratification by a piecewise constant profile. In the latter case, the main point is to study the evolution of the free interface between both layers, which leads to a substantially simplified model. In the present article, we compare both approaches in the framework of the linearized stratified Euler equations around density profiles that are close to piecewise constant profiles, and prove the convergence towards the bilayer Euler equations. However, in the presence of a shear flow, bilayer models have a range of validity limited by the presence of Kelvin-Helmholtz instabilities. In this case, we use a suitable normal modes decomposition to compute numerically the dispersion relation of this linearized model, and provide numerical evidence that the Kelvin-Helmholtz instabilities limit the applicability of two widely used bilayer models, namely the bilayer Euler equations and the bilayer shallow-water equations.

2026-03-16T13:51:51Z Author Accepted Manuscript Théo Fradin http://arxiv.org/abs/2607.09241v1 2026-07-10T09:36:33Z

Compact structures of intense tangential Reynolds stress (Q events) are well-known components of wall-bounded turbulence, and have been shown to be coherent because they approximately govern their own evolution. It has therefore often been assumed that they also are causally significant, in the sense that they explain the evolution of the incoherent component of the flow, which could thus be modeled as a superposition of structures. Since strong events typically only fill a small percentage of the total flow volume, this is also cited as a reason for considering structures as targets for efficient engineering flow control. This paper shows that the causality assumption does not hold in general. Only about half of the structures identified in the flow are causally more significant than an equivalent volume of incoherent turbulence. To explain this variability, feature-based analysis and conditional averaging are performed. For wall-attached Q2 events and wall-detached structures, causally enhanced events are characterized by elevated strain rate and spanwise vorticity. These signatures are traced to intense upstream strain regions generated by the interaction of Q4-like motions impinging on Q2 events. For wall-attached Q4 events, the dominant indicators are instead the wall-normal and streamwise vorticity components; enhanced causal significance is associated with strong wall-normal vorticity. These findings show that quadrant events cannot be treated as a dynamically homogeneous class in causal analyses. Their causal significance depends strongly on the local flow environment, emphasizing the need to interpret coherent structures in terms of their interactions with the surrounding turbulence.

2026-07-10T09:36:33Z 29 pages, 18 figures Peng E S Chen Javier Jimenez http://arxiv.org/abs/2512.12628v3 2026-07-10T05:49:59Z

Accurately autoregressive prediction of three-dimensional (3D) turbulence has been one of the most challenging problems for machine learning approaches. Diffusion models have demonstrated high accuracy in predicting two-dimensional (2D) turbulence, but their applications in 3D turbulence are relatively limited. To achieve reliable autoregressive predictions of 3D turbulence, we propose the DiAFNO model which integrates the implicit adaptive Fourier neural operator (IAFNO) with diffusion model. IAFNO can effectively capture the global frequency and structural features, which is crucial for global consistent reconstructions of the denoising process in diffusion models. Furthermore, based on conditional generation from diffusion models, we design an autoregressive framework in DiAFNO to achieve long-term stable predictions of 3D turbulence. The proposed DiAFNO model is systematically trained and tested separately with fixed hyperparameters in several types of 3D turbulence, including forced homogeneous isotropic turbulence (HIT) at Taylor Reynolds number 100, decaying HIT at initial Taylor Reynolds number at 100 and turbulent channel flow at friction Reynolds numbers 395 and 590 with case-specific training at each Reynolds number. The results in the \textit{a posteriori} tests demonstrate that DiAFNO exhibits a significantly higher prediction accuracy in most of the analyzed statistics (such as the velocity spectra, the root-mean-square (RMS) values of both velocity and vorticity, and Reynolds stresses), as compared to the elucidated diffusion model (EDM) and the traditional large-eddy simulation (LES) using dynamic Smagorinsky model (DSM). Although DiAFNO is not optimal in certain statistics, its overall performance is substantially better than all baseline models (EDM and DSM). Ignoring training costs, the well-trained DiAFNO achieves higher inference efficiency than EDM and LES with DSM.

2025-12-14T10:22:03Z Yuchi Jiang Yunpeng Wang Huiyu Yang Jianchun Wang http://arxiv.org/abs/2607.09071v1 2026-07-10T03:31:48Z

Multiscale fluid flows often contain localized flow structures, such as viscous shock layers, wet-dry fronts, steady viscous wakes, decaying vortical structures, and vortex-shedding patterns, whose accurate prediction requires the simultaneous preservation of global conservation trends and small-scale gradients. This study examines these flow-physics requirements through a physics-informed wavelet-Fourier (PIWF) representation for multiscale fluid dynamics. Instead of relying on a single monolithic neural approximator, the formulation separates two complementary components of the flow field within a physics-informed neural representation: long-range coherent modes through a Fourier-basis branch and localized steep-gradient or vortical features through a compactly supported wavelet branch. The outputs are fused with a residual multilayer perceptron using channel attention, and the governing equations, initial conditions, and boundary conditions are imposed directly through the physics-informed loss. The model is assessed on five canonical fluid-dynamics problems: Burgers' equation, the shallow water equations, Kovasznay flow, Taylor--Green vortex flow, and two-dimensional cylinder wake flow. The results show that PIWF improves the resolution of shock-like gradients, wet--dry interfaces, steady wake fields, decaying vortical structures, vorticity extrema, and broadband wake spectra relative to standard physics-informed neural networks and physics-informed Kolmogorov--Arnold networks. These findings indicate that a wavelet-Fourier physics-informed representation can provide a useful route for analyzing multiscale flow phenomena when high-fidelity interior reference data are limited or unavailable.

2026-07-10T03:31:48Z Chao Wang Shilong Li Yunpeng Wang Tianbai Xiao Zelong Yuan Chenyue Xie Chunyu Guo http://arxiv.org/abs/2510.13033v2 2026-07-10T02:47:42Z

This study introduces a liquid-fueled reactor network (LFRN) framework for reduced-order modeling of gas turbine combustors. The proposed LFRN extends conventional gaseous-fueled reactor network methods by incorporating specialized reactors that account for spray breakup, droplet heating, and evaporation, thereby enabling the treatment of multiphase effects essential to liquid-fueled systems. Validation is performed against detailed computational fluid dynamics (CFD) simulations of a liquid-fueled can combustor, with parametric studies conducted across variations in inlet air temperature and fuel flow rate. Results show that the LFRN substantially reduces NOx prediction errors relative to gaseous reactor networks while maintaining accurate outlet temperature predictions. A sensitivity analysis on the number of clusters demonstrates progressive convergence toward the CFD predictions with increasing network complexity. In terms of computational efficiency, the LFRN achieves runtimes of $O(10s)$ on a single CPU core, representing speed-ups generally exceeding 1,000$\times$ compared to CFD. Overall, the findings demonstrate the potential of the LFRN as a computationally efficient reduced-order modeling tool that complements CFD to enable rapid emissions assessment and design-space exploration for liquid-fueled gas turbine combustors.

2025-10-14T23:06:18Z Philip John Haresh Chandrasekhar Sourav Saha Opeoluwa Owoyele http://arxiv.org/abs/2607.04491v2 2026-07-10T00:36:40Z

Data-driven turbulence closures are usually calibrated by inverse methods that embed a CFD solver in the loop, tying the model to a particular discretization and requiring every iterate to yield a convergent solve. We instead train the closure inside a physics-informed neural network (PINN): the Reynolds-averaged Navier-Stokes residual is imposed by automatic differentiation, so the inverse problem is mesh-free, differentiable, and solver-agnostic. Because no forward solve runs during training, only the final closure need be solver-stable, arbitrary neural closures are admitted without an adjoint, and the iterative cost of adjoint or ensemble methods vanishes; each hypothesis trains in minutes on a single GPU, so the framework rapidly screens closure forms. We develop four closures: three model the Reynolds stress on a realizable tensor basis -- a local map, a non-local model transporting the turbulent kinetic energy and recovering the out-of-plane normal stress, and the same with a learned length scale l -- and a fourth models the Reynolds force F = -\nabla \cdot τdirectly, free of the realizability constraint. All four are trained across six two-dimensional bluff-body wakes at Re = 10^4 and deployed frozen in a standard finite-element solver, stabilized by input-gradient smoothing and a Lipschitz constraint. Under a strict leave-one-shape-out (LOSO) protocol, all four improve substantially on a steady SST k-omega baseline. The learned-length-scale closure is most accurate on the stress fields, while the force model generalizes best on the mean velocity and drag (LOSO drag error ~8.5%). The closures also train efficiently on Particle Image Velocimetry data, enabling geometries intractable for DNS.

2026-07-05T20:31:44Z 42 pages, 24 figures Zhen Zhang Theo Käufer Louise Ronglan Michael S. Triantafyllou George Em Karniadakis http://arxiv.org/abs/2607.08976v1 2026-07-09T22:44:18Z

Efficiently solving nonlinear ordinary and partial differential equations using a quantum computer is a major challenge due its inherent linearity. To circumvent this challenge, the Carleman linearization method has been proposed to transform a nonlinear ordinary differential equation into a linear system of equations, the primary advantage being that existing quantum linear systems algorithms may then be applied to obtain a solution. However, this methodology also brings forth several major challenges that must be addressed to attain a quantum advantage. Herein, we address several of these challenges enabling us to solve the Carleman linearized one-dimensional Burgers' equation on real and simulated quantum hardware. All simulations were performed on BlueQubit's platform allowing for quantum circuits to be run on GPU or QPU's seamlessly. We first demonstrate that the Carleman linearized Burgers' equation can be efficiently loaded onto a quantum computer using the linear combination of non-unitaries method, an alternative to the linear combintaiton of unitaries approach. Once loaded, the linear system is then solved using the variational quantum linear solver. Since a naive implementation of this solver is hindered by the barren plateau phenomenon, we introduce a multigridding method to solve the problem in a series of stages with the solution of the previous stage acting as a warm start for the next stage. This approach is found to significantly improve the accuracy of the solution compared with a naive cold start. Finally, circuits with a combined number of spatial and temporal discretization points totaling up to $2^{80} \approx 10^{24}$ are transpiled onto real quantum hardware demonstrating that the proposed methodology could feasibly produce a quantum advantage on future hardware.

2026-07-09T22:44:18Z 31 pages, 17 figures Reuben Demirdjian Yvan Quinn Vincent P. Su Hrant Gharibyan Hayk Tepanyan http://arxiv.org/abs/2607.08969v1 2026-07-09T22:12:26Z

Numerical modeling of solar plasma dynamics is affected by the resolution of the computational grid. This often requires the estimation of subgrid processes related to the small-scale flow turbulence, as these processes play a critical role in momentum transport and energy dissipation. In this work, we investigate the use of deep learning techniques as surrogate models for subgrid turbulent transport in realistic hydrodynamic simulations of the quiet Sun. We describe the development of a 3D Convolutional Neural Network (CNN) to capture spatial dependencies in 3D velocity fields, leveraging different activation functions, as well as different architectural designs. We specifically focus on the prediction of Reynolds stress tensor components. The resultant model integrates velocity vector components and scalar features, such as plasma density, to enhance prediction accuracy. We compare the 3DCNN model to other types of models, such as a Multilayer Perceptron (MLP) and physics-based Gradient and Smagorinsky models, and show that the final model design reconstructs the Reynolds stress tensor components more accurately. Specifically, a 3DCNN model achieves an average improvement of ~31% on diagonal components and ~8% on the off-diagonal components of the stress tensor. Additionally, we show that applying a logarithmic data transformation of the target stress tensor components, to handle heavily skewed data, improves model performance. Results demonstrate the potential of deep learning, particularly CNNs, to approximate Reynolds stress tensor components for the upper solar convection zone and lower atmosphere, making them a viable candidate for modeling subgrid processes and a promising alternative to traditional turbulence models.

2026-07-09T22:12:26Z 45 pages, 18 figures, 8 tables, accepted to ApJS Rimsha Hameed Syeda Dustin Kempton Viacheslav Sadykov Irina Kitiashvili Rafal Angryk http://arxiv.org/abs/2607.08878v1 2026-07-09T19:09:37Z

Experiments on the regeneration of long streaks in flows in which they had originally been damped show that their initial growth is due to the interaction of the mean shear with long cross-flow velocities (rollers) that remain even when the streaks are damped. More surprisingly, turbulence also persists in simulations in which only the long rollers are damped while long streaks remain, and these flows are also able to recover when the damping is removed. Finally, simulations are presented in which both streaks and rollers longer than $λ_x^+ \approx 600$ are damped. They survive and regenerate, and an interpretation in terms of their energy balance is provided. In contraposition to the classical minimal channels, which include infinitely long structures, these new flows do not contain features longer than the damping wavelength, and support a model in which wall turbulence only depends on processes for which the geometric aspect ratio is of order unity.

2026-07-09T19:09:37Z Carlos Martinez Lopez Javier Jimenez http://arxiv.org/abs/2607.08870v1 2026-07-09T18:50:00Z

The well-known Shallow Water Equations (SWE) are used for modeling incompressible free-surface flows whenever the shallowness allows for a vertical-averaging; i.e., vertical effects are negligible in comparison to horizontal ones. But vertical averaging comes with the price of losing information along the vertical axis. Moment models for shallow flow contain information on the vertical velocity and pressure profile despite being dimensionally reduced. A class of these models incorporating a non-hydrostatic pressure have been introduced before as Dispersive Shallow Moment Models (DSM). However, no method for solving the non-stationary equations has been presented yet, mainly because it was unclear how to compute the pressure equation in the form of the divergence-free constraint. We rewrite the pressure equations of the DSM models in the form of a Poisson-like problem to enable their solution with a projection-type splitting scheme. For the linear equations, we present the calculations for the generalized model and discuss the non-linear case. We state the first two linear models and the corresponding nonlinear counterparts. Finally, we introduce a hybrid Finite-Volume Finite-Difference method and discuss the non-stationary numerical results for an experiment with periodic boundary and uneven bottom topography.

2026-07-09T18:50:00Z Ullika Scholz Robin Paar Manuel Torrilhon http://arxiv.org/abs/2603.05325v2 2026-07-09T17:04:12Z

Data-driven closures for large-eddy simulation (LES) are commonly built to respect the symmetries of the Navier--Stokes equations, on the premise that this improves accuracy and generalization. We test this premise in a controlled comparison of three data-driven LES closures that share a pointwise, Galilean-invariant velocity-gradient construction but span non-equivariant, octahedral-equivariant, and tensor-basis designs: an unconstrained multi-layer perceptron (MLP), a group-convolutional network whose exactly equivariant weights we synthesize in closed form, and a tensor-basis neural network (TBNN). The designs follow from an analysis of which symmetries survive discretization on a uniform grid, where the continuous orthogonal group reduces to the 48-element octahedral group. Across a range of network sizes the three closures saturate to the same a priori and a posteriori accuracy, and a direct conditional-mean estimate identifies the a priori floor as the one-point optimal closure of Langford and Moser. The equivariant and tensor-basis models reach this floor with $25$ times fewer parameters than the MLP: the inductive bias buys parameter efficiency rather than a lower error floor. Finally, we train the closures across several viscosities and supply the global filter-scale Reynolds number $\operatorname{Re}_Δ= Δ^2 \| \nabla \bar{u} \| / ν$ as an input, a scaling-invariant feature dictated by the same symmetry analysis. The closures then generalize across Reynolds number: they hold their dissipation calibration at held-out viscosities and filter ratios where Reynolds-blind closures mis-dissipate, and partially correct it on an out-of-distribution Taylor--Green flow. Reynolds-number generalization is thus largely a calibration that the right input feature supplies.

2026-03-05T16:06:31Z 38 pages (36 + graphical abstract + highlights), 15 figures, 8 tables Syver Døving Agdestein Benjamin Sanderse http://arxiv.org/abs/2607.08678v1 2026-07-09T16:41:54Z

Experimental investigations of forced stably stratified turbulence (SST) have shown that the step-like density profile, made of well-mixed density layers and sharp interfaces alternating along the gravity direction, undergo a slow coarsening dynamics with either decay or merging of interfaces. In this Letter, we focus on the coarsening dynamics phenomenon, by means of Direct Numerical Simulations of forced SST at moderate resolutions, and very long temporal integration. We show that the vertical drift and merging of interfaces is associated to the emergence of spatially-uniform, vertically-sheared helical structures that break the mirror-symmetry of the system. When these are absent, interfaces decay is observed instead. %how the kinetic energy excursions observed at $Fr=0.076$, occurring in parallel to vertical drift of interfaces, are due to the emergence of spatially-uniform, vertically-sheared helical structures that break the mirror-symmetry of the system. This is absent at larger $Fr=0.22$, where interface decay is observed instead. A dynamical correspondence between helicity dissipation rate by buoyancy effects and the vertical buoyancy flux allows to establish a (causal) connection between the chiral structures and the vertical movement of interfaces leading to merging.

2026-07-09T16:41:54Z 7 pages, 7 figures. Submitted to EPL Focus Issue on Complex Flows and Complex Fluids Niccolò Cocciaglia Luca Biferale Fabio Bonaccorso Alessandra S. Lanotte http://arxiv.org/abs/2607.08673v1 2026-07-09T16:36:46Z

Inverse energy transfer to large-scale coherent structures in idealized models of geophysical flows has been of interest for over four decades. Extensive knowledge exists regarding inverse transfer in rotating and stratified dry dynamics, characterized by the Rossby number and a single dry Froude number. The current study includes effects of water and phase changes, with dynamics characterized by the Rossby number and two Froude numbers for unsaturated and saturated environments. Using numerical computations with random forcing, inverse energy transfer is examined for a model with a Boussinesq dynamical core, incorporating water vapor and liquid water in the limit of asymptotically-fast cloud microphysics. Besides kinetic energy, total energy includes buoyant potential energies from each phase, and latent moist energy responsible for potential energy transfer at phase boundaries. The rotation and stratification terms are large and comparable, such that the dry version of the evolution equations is dominated by inverse transfer of pseudo potential vorticity(PV). For fixed Rossby and dry (unsaturated) Froude numbers, compared to dry dynamics, there is a reduction in energy transfer rate, associated with the larger Froude number of saturated regions. The upscale transfer to moist PV is influenced by nonlinear waves at lowest order resulting from nonlinear buoyancy near phase interfaces. These nonlinear waves lead to coherent updrafts and downdrafts roughly aligned with fuzzy, large-scale phase boundaries identified by the time average of a cloud indicator function. Statistical relationships between phase boundaries, updrafts/downdrafts and moist PV are explored in flow regions dominated by moist PV-vortices.

2026-07-09T16:36:46Z Yeyu Zhang Yingshuo Peng Leslie M. Smith