https://arxiv.org/api//eoAVWrFBjXOyCTGH07uvV+dwyM 2026-07-22T00:54:03Z 34643 255 15 http://arxiv.org/abs/2607.03301v1 2026-07-03T13:11:48Z

We present a surrogate modeling strategy for Stokes flows with liquid droplets suspended in a carrier fluid. Our approach is based on a multi-fidelity framework. At the lowest fidelity, droplets are treated as passive tracers, neglecting their influence on the ambient flow field. Building on this approximation, we derive a PDE that represents the current modeling error. This error equation is then solved approximately to correct the flow field and the procedure is iterated. Two fidelities are employed in an alternating fashion: Stokes flow in the absence of droplets and flow around a single droplet in free space. By systematically combining these models, the method captures droplet-flow, droplet-boundary, and droplet-droplet interactions. For geometrically similar droplets, we further develop an efficient offline-online strategy that exploits this structure by reusing precomputed single-droplet solutions. Numerical experiments demonstrate the accuracy and efficiency of the proposed surrogate in a variety of tests, including scenarios with up to 10,000 droplets. Notably, we show that the proposed surrogate achieves substantially reduced computational cost compared to fully resolved multi-fluid simulations with state-of-the-art software.

2026-07-03T13:11:48Z Davide Pradovera Thomas Frachon Sara Zahedi http://arxiv.org/abs/2607.00199v2 2026-07-03T13:01:07Z

We propose the arbitrary Lagrangian-Eulerian (ALE) form of the Galerkin-Boltzmann formulation for the simulation of nearly incompressible flows with moving boundaries. The continuous Boltzmann equations are mapped to a reference state to compensate the mesh motion with an advection term. The resulting system is discretized in space using the discontinuous Galerkin method on unstructured meshes. A semi-analytic Runge-Kutta time discretization is used to overcome the stiffness introduced by the continuous Boltzmann equations. The well-known geometric conservation law is shown to be satisfied by the time and space discretizations and consistent update of geometric factors of the discretization. The implementation is on the GPU accelerated kernel library libParanumal and validated by a free stream preservation and moving Taylor-Green vortex test cases. Then, the capabilities are shown using a plunging symmetric airfoil in two-dimensions and moving carangiform fish in three-dimensions using perfectly matched layers.

2026-06-30T21:26:57Z Atakan Aygun Onur Ata Tim Warburton Ali Karakus http://arxiv.org/abs/2509.09475v3 2026-07-03T10:28:01Z

Existing theoretical analyses on Faraday instability in Hele-Shaw cells typically adopt gap-averaged governing equations and rely on Hamraoui's model coming from molecular kinetics theory, thereby oversimplifying essential transverse information, such as contact line velocity and capillary hysteresis, and conflicting with the unsteady meniscus dynamics. In this paper, a gap-resolved approach is developed by directly modeling the transverse gap flow and the contact angle dynamics, which overcomes the aforementioned limitations, ultimately yielding a modified damping with respect to the static contact angle and hysteresis range. A novel amplitude equation for linear Faraday instability is derived that combines this damping and the gap-averaged counterpart based on the oscillatory Stokes boundary layer, with the viscous dissipation preserved. By means of Lyapunov's first method, an explicit analytical expression for the critical stability boundary is established. Two series of laboratory experiments are performed that focus, respectively, on evolutions of the lateral meniscus and the longitudinal free surface near the Faraday onset, from which key parameters relevant to the theory are precisely measured. Based on the experimental data, the validity of the proposed mathematical model for addressing the Faraday instability problem in Hele-Shaw cells is confirmed, and the generation and development mechanisms of the onset are clarified. In the asymptotic analysis, the inclusion of contact angle dynamics increases the overall damping and thus partially compensates for the frequency detuning introduced by oscillatory Stokes flow approximation.

2025-09-11T13:58:27Z J. Fluid Mech. 1035 (2026) A33 Xingsheng Li Jing Li Xiaochen Li 10.1017/jfm.2026.11578 http://arxiv.org/abs/2602.21475v2 2026-07-03T09:44:19Z

For a gas of diatomic particles with a nonzero magnetic moment, the Senftleben-Beenakker effect implies that transport can be affected by a magnetic field even when the particles are charge neutral. In such a gas, two independent anisotropic odd viscosities are allowed by symmetry and can have opposite signs. We study the resulting odd-viscous Stokes flow around spheroids in the regime where the odd viscosities are small compared to the shear viscosity. Using a perturbative expansion around the spherical solution and the Lorentz reciprocal theorem, we compute the lift forces on oblate and prolate spheroids for general values of the two odd viscosity coefficients. We show that the resulting Hall angles can differ for oblate and prolate spheroids, implying that sedimentation in a diatomic gas subject to a background magnetic field can separate particles according to shape.

2026-02-25T01:04:49Z Ruben Lier http://arxiv.org/abs/2607.03037v1 2026-07-03T07:30:50Z

The flow of structured fluids, such as polymeric and micellar solutions, involves a strong two-way coupling between flow kinematics and internal microstructural dynamics, including polymer stretching, micellar scission, and reformation. These interactions yield complex nonlinear rheological responses, including viscoelasticity, shear-thinning, and thixotropy. In this study, we perform high-fidelity numerical simulations of micellar solution flow past a circular cylinder using the Modified Bautista-Manero (MBM) model, which couples a viscoelastic constitutive equation with a kinetic equation for fluidity to capture reversible micellar breakage and reformation. Model parameters are derived from quantitative fitting of experimental data for the EHAC-NaSal system. Our results reveal substantially richer flow dynamics than in Newtonian fluids under the same conditions. Transitions to unsteady flow occur at significantly lower Reynolds numbers, indicating greater instability driven by microstructural effects. At intermediate Reynolds numbers, micellar flows exhibit quasi-periodic behaviour, contrasting with classical periodic vortex shedding in Newtonian cases. Unlike the monotonic drag reduction in Newtonian fluids, micellar solutions show an anomalous drag increase. Wake characteristics reverse with regime: larger recirculation zones at low Reynolds numbers but more compact wakes in unsteady flows. Lift coefficients and Strouhal numbers are consistently increased. Vorticity fields display pronounced spatial localisation within thin near-wake shear layers. A dynamic mode decomposition analysis reveals coexisting unstable time-decaying and self-sustained modes in micellar flows, whereas only self-sustained modes appear in Newtonian cases.

2026-07-03T07:30:50Z Kartik Anant Chauhan Chandi Sasmal http://arxiv.org/abs/2511.20215v4 2026-07-03T07:30:15Z

Fluid mixtures, ranging from the cellular cytoplasm to synthetic DNA nanostar systems, can spontaneously compartmentalize into many ($N$) coexisting liquid phases through liquid-liquid phase separation. While such systems exhibit a remarkable diversity of spatial organizations, the physical principles governing their non-equilibrium dynamics remain poorly understood. Here, combining simulations and analytical theory, we show that the coarsening dynamics of many component phase separation are fundamentally linked to mathematical coloring problems. For planar phase organization, relevant to synthetic droplet monolayers and simple biological structures, we identify distinct topological constraints for $N=2$, $N=3$, and $N=4$, with no further change for $N>4$, consistent with the four-color theorem. These constraints govern the coarsening dynamics, and, using chromatic graph theory, we derive a theoretical model for $N\geq 3$ that quantitatively captures the diffusive-like coarsening. By contrast, classical theories based solely on Ostwald ripening underestimate the observed dynamics. We further show that tuning interfacial tensions modifies the set of admissible phase arrangements, enabling highly heterogeneous coarsening dynamics across different phases. For unconfined systems with nonplanar phase organization, different coloring constraints apply, with no analogue of the four-color theorem, and coalescence suppression emerges only when the number of phases exceeds $N\gtrsim 7$. More broadly, our work establishes coloring theory as a topological framework for understanding and predicting the dynamics of many component phase-separating fluids.

2025-11-25T11:41:23Z Michael Rennick Xitong Zhang Halim Kusumaatmaja http://arxiv.org/abs/2607.03016v1 2026-07-03T06:50:59Z

Stability of a high-speed gas flow past a compliant solid is impacted by two distinct features: high solid-to-fluid density ratio ($ρ_r$), and flow compressibility when flow speeds are comparable to acoustic speed. This study investigates the linear stability of a shear-driven compressible gas flow past a compliant substrate modelled as a continuum Neo-Hookean solid. Numerical solutions of the eigenvalue problem reveal that at high density ratios, the dominant instabilities are the elastic shear-waves of the solid. Our study shows that flow compressibility exerts a non-monotonic effect on the growth rate of the elastic modes; the growth rate increases with increase in Mach number up to $\mbox{Ma} \approx 2$ before subsequently decreasing. Furthermore, for compressible flows, strong thermal-coupling renders the base state highly sensitive to both the solid-to-fluid thermal conductivity ratio and the substrate's bottom-surface temperature. Numerical results demonstrate that increasing the conductivity ratio destabilizes the system, whereas increasing the bottom wall temperature is stabilizing. The stability equations, analyzed in the asymptotic limit of $ρ_r \mbox{Re} \gg 1$, reveals that the fluid-solid system de-couples at the leading order with the elastic modes emerging as a solution of the linear elasticity equations under free-shear condition at the interface. We derive a closed-form expression for the leading-order growth rate of the instability, which shows an excellent agreement with the numerical solution. This expression explicitly quantifies the influence of fluid stresses at the interface, which can in-turn be expressed as integrals of the flow solution isolating the distinct physical mechanisms driving the instability.

2026-07-03T06:50:59Z Mandeep Deka http://arxiv.org/abs/2607.02993v1 2026-07-03T06:04:27Z

We present a fully inertial slender-body theory (SBT) that incorporates the effect of fluid inertia on the scale of the length (the "outer" region) as well as the characteristic diameter (the "inner" region) of a steadily translating slender particle. This is achieved by matching the solution of the quasi-two-dimensional full Navier-Stokes equations in the inner region to an outer solution that consists of a superposition of a solution of the linearized Navier-Stokes equations driven by a line of forces and a potential flow solution driven by a line distribution of sources and source dipoles. The drag and lift forces result from the distribution of Oseen force singularities. These Oseenlets also predominantly govern the torque at small Reynolds numbers and large aspect ratios. However, the potential flow singularities play a crucial role in yielding a torque that grows with increasing Reynolds number at large Reynolds numbers and finite aspect ratios. By comparing the forces and torque on the steadily translating particle with those obtained from a finite difference Navier-Stokes solution, we demonstrate the accuracy of the resulting inertial SBT for $\mathrm{Re}_D$ up to 10, where $\mathrm{Re}_D$ is the Reynolds number based on the smallest dimension, i.e., the characteristic cross-sectional diameter of the slender particle.

2026-07-03T06:04:27Z 41 pages, 23 figures. Submitted to Journal of Fluid Mechanics Anmol Joshi Anubhab Roy Arjun Sharma Donald L. Koch http://arxiv.org/abs/2607.02974v1 2026-07-03T05:32:41Z

We investigate turbulent dissipation in a von Karman flow using PIV and Diffusing Wave Spectroscopy measurements to directly compare bulk and wall dynamics. While bulk dissipation conforms to the dissipative anomaly, wall dissipation exhibits a clear excess that grows with Re, consistent with velocity-gradient dominated scaling. Decomposition into dissipation intensity bands reveals that this excess is mainly driven by progressive redistribution toward high-intensity events, larger than 10 x mean, as Re increases. From these measurements, we infer the skin-friction coefficient, finding a decreasing trend with Re fairly consistent with classical power-law behavior despite increasing dissipation. Statistically, the wall shows strong departures from log-normality at low Re that diminishes with increasing Re, reflecting an increase in the effective dimensionality of the near-wall gradient field with Re. In contrast, the bulk dissipation remains near log-normal across all Re with slowly growing log-dissipation variance, consistent with K62 refined similarity. These results suggest distinct origins of log-normal behavior which are multiplicative cascade dynamics in the bulk versus the combined effect of persistent shear and a superposition of an increasing number of independent gradient contributions at the wall.

2026-07-03T05:32:41Z Benjamin Musci Sebastien Aumaitre Enzo Francisco Adam Cheminet Berengere Dubrulle http://arxiv.org/abs/2603.28981v3 2026-07-03T05:22:00Z

We develop a conservative finite-volume Buckley--Leverett solver equipped with a bounded-interval multiwavelet state-analysis layer. Because non-capillary Buckley--Leverett transport is a nonlinear hyperbolic conservation law with entropy-admissible shocks, the saturation equation is advanced by a conservative finite-volume method with monotone numerical fluxes. The accepted finite-volume state is then embedded in a bounded-domain multiwavelet hierarchy, reconstructed back to cell averages, and used for multiresolution diagnostics. The formal transport accuracy is therefore governed by the underlying finite-volume discretization, while the multiwavelet layer is used for representation, compression, and front-localization diagnostics. Its purpose is instead to quantify whether the deterministic physical-space saturation state can be represented faithfully, compressed in a controlled manner, and used to identify dynamically active front regions. Validation against reference Buckley--Leverett profiles for a Berea benchmark shows accurate saturation histories, spatial profiles, front-position diagnostics, and mass balance. The multiwavelet reconstruction tracks the internal finite-volume state with essentially exact fidelity. Additional thresholding tests show that a substantial fraction of detail coefficients can be discarded while maintaining small reconstruction errors and negligible global mass defect, and fine-level detail activity localizes the moving displacement front. The resulting formulation provides a conservative and reproducible first stage toward future transport-active adaptive multiwavelet solvers for porous-media flow.

2026-03-30T20:29:35Z Christian Tantardini http://arxiv.org/abs/2607.02745v1 2026-07-02T20:26:52Z

We experimentally study the two-way coupling between a swarm of centimetre-scale active swimmers (Artemia salina) and an electromagnetically driven quasi-two-dimensional cellular flow. The swimmer loading $N$ and the background forcing $E$ are varied independently across 85 conditions, and the coupled dynamics are characterized through Lagrangian diagnostics built on the attracting Lagrangian coherent structures (LCS) of the flow. In the dilute limit, swimmers accumulate onto the attracting LCS most strongly when their speed is comparable to the flow speed, recovering the mobility-selective accumulation predicted by one-way-coupled simulations at the fixed aspect ratio of A. salina. As the loading increases, this accumulation is progressively suppressed, a collective effect inaccessible to single-swimmer models. The back-action of the swarm on the flow is itself bidirectional and regime-dependent: at low forcing the swarm disorders the attracting-LCS web and scatters the topological critical points of the cellular pattern, whereas at high forcing it reorganizes and reinforces the skeleton. The temporal stability of the skeleton is correspondingly non-monotonic in both $N$ and $E$, with the conditions of maximal stability migrating systematically through the $(N,E)$ plane. This reinforcement of coherent structures has no counterpart in prior simulations, which reported a predominantly disruptive back-action. Resolving both directions of the coupling shows how collective activity can either erode or reinforce the transport skeleton of a structured flow.

2026-07-02T20:26:52Z 27 pages, 5 figures Miyi Wu Ziyue Yu Lei Fang http://arxiv.org/abs/2607.02743v1 2026-07-02T20:26:32Z

Small-scale dynamos (SSDs) are believed to be the primary source of magnetic fields in all turbulent astrophysical systems, especially those with weak rotation such as elliptical galaxies and galaxy clusters. The initial kinematic phase of these dynamos is relatively well understood. Here we demonstrate analytically and numerically that, in an appropriate limit, the eddy-damped quasi-normal Markovian (EDQNM) closure for incompressible magnetohydrodynamic turbulence is strictly equivalent to the earlier models of kinematic dynamos. Moreover, it allows the extension of the kinematic dynamo framework to multi-scale turbulent flows and into the nonlinear regime. The EDQNM closure also enables us to explore a wide parameter range which is inaccessible to direct numerical simulations of the SSD. Using nonhelical EDQNM simulations, we identify several asymptotic regimes of nonlinear dynamo action when the system is highly turbulent with fluid Reynolds number $Re \gtrsim 10^6$ for magnetic Prandtl number $Pm > 1$ and magnetic Reynolds number $Rm \gtrsim 10^6$ for $Pm < 1$: 1) the kinematic growth rate approaches a value independent of $Pm$, 2) the saturated magnetic to kinetic energy ratio similarly converges to $\simeq 0.55$ across $Pm$, while the ratio of magnetic to kinetic integral wavenumbers asymptotes to $\simeq 3$. For all $Pm$, we further find strong feedback between magnetic field and velocity field largely via Alfvénisation leading to a saturated kinetic and magnetic spectra with almost the same inertial range with a slope of $-3/2$. These findings could provide guidance for future global simulations and for modeling the nonlinear regime of astrophysical systems living in these extreme limits.

2026-07-02T20:26:32Z 13 pages, 19 figures (excluding appendix). Comments are welcome Muhammed Irshad Kandaswamy Subramanian Pallavi Bhat http://arxiv.org/abs/2607.02739v1 2026-07-02T20:20:01Z

In this paper we consider solutions $\boldsymbol{u}$ of the three-dimensional Navier-Stokes system and investigate sharpness of the a priori bound \begin{align*} \frac{d}{dt}\|\boldsymbol{u}\|_q^q \leq C\|\boldsymbol{u}\|_q^{q\frac{q-1}{q-3}}, \qquad q > 3. \end{align*} This bound is closely related to the Ladyzhenskaya-Prodi-Serrin conditions characterizing classical solutions of the Navier-Stokes system. Velocity fields maximizing the rate of growth $(d/dt)\|\boldsymbol{u}\|_q^q$ under certain constraints are found as solutions of a suitable optimization problem which is solved numerically using a Riemannian conjugate gradient approach. The results obtained for different $q$ and increasing values of $\|\boldsymbol{u}\|_q$ indicate that the bound is indeed sharp, up to a numerical prefactor, and therefore cannot be fundamentally improved. Additionally, the results also suggest that the rate of growth $(d/dt)\|\boldsymbol{u}\|_q^q$ diverges as $q\to 3$.

2026-07-02T20:20:01Z 41 pages, 7 figures, 4 tables Fabian Bleitner Bartosz Protas http://arxiv.org/abs/2607.02730v1 2026-07-02T19:40:04Z

When two low-Ohnesorge-number drops impact a dry substrate simultaneously, their spreading lamellae collide and lift a free-standing vertical sheet. The sheet grows by inertial feeding from the spreading drops and is pulled back by capillary retraction at its rim. We develop a semi-analytical model for this rising sheet by extending the single-drop impact description of~\citet{Gordillo2019} to the two-drop geometry. The thin-film flow in the sheet is coupled at its base to the colliding lamellae and at its apex to a capillary-retarded rim. The sheet interior is then solved along ballistic characteristics in two stages: a lamella-fed stage, for which the velocity and thickness fields can be obtained in closed form, and a post-lamella stage, for which the inlet conditions are taken from simulations. The resulting framework gives the three-dimensional velocity and thickness fields and therefore the full sheet shape. On the centreline, the apex height and local thickness are obtained explicitly, showing that the different Weber-number exponents reported in the literature arise from a crossover rather than from a single universal scaling law. At sufficiently large Weber number, the apex pinches off. A linear Rayleigh--Plateau analysis, using the time-dependent jet diameter and deceleration predicted by the model, then bounds the maximum attainable height and closes the description of the pinch-off regime.

2026-07-02T19:40:04Z Shushan Hu Liwu Fan Nan Hu http://arxiv.org/abs/2607.02398v1 2026-07-02T16:32:53Z

We have conducted Direct Numerical Simulations of turbulent half-channel flow over realistic surface deformations at friction Reynolds number $Re_τ=200$. We generated the surface deformations using piezoelectric actuators. We simulated the piezoelectric actuation over the practical actuation frequency range $(119Hz\le f_\mathrm{act}\le543Hz)$ and voltage range $(250V\le Q \le500V)$ beneath an Aluminum sheet using Finite Element Analysis. The sheet deformation amplitude and actuation frequency in viscous units vary within the range $2 \le η^+_\mathrm{max} \le 34$, and $-0.58 \le ω^+ \le 0.70$. The vertical surface deformations from our actuation setup generate three types of waves: travelling, hybrid, and standing waves. Surface deformations are applied as bottom-wall boundary conditions of the turbulent channel flow to generate waves in the upstream, downstream, and spanwise directions. We achieved maximum drag reductions of 1.6\%, 5.4\%, and 27.6\% for upstream, downstream, and spanwise waves, respectively. The streamwise waves generate alternating adverse and favorable pressure gradients, which locally increase and decrease drag, leading to a marginal net change in drag. In contrast, spanwise waves introduce transverse shear, accompanied by high- and low-streamwise-momentum zones that respectively attenuate and energize the near-wall turbulence. Such disruption of the near-wall turbulence-regeneration cycle produces up to $27\%$ drag reduction for the realistic spanwise hybrid wave; such an outcome demonstrates the efficacy of unconventional realistic surface deformations in achieving significant drag reduction.

2026-07-02T16:32:53Z Amir Amjadimanesh Aman Kidanemariam David Chappell Mahdi Bodaghi Amirreza Rouhi