https://arxiv.org/api/7OUKqa+8wtteyNa4wa3ctTPw+bs 2026-07-21T22:33:15Z 34643 225 15 http://arxiv.org/abs/2603.15069v2 2026-07-06T11:48:31Z

This article addresses the widely overlooked conceptual inconsistency of the large eddy simulation (LES) framework, namely that the commonly used advection term introduces higher wave numbers in the filtered Navier-Stokes equations than consistent with the definition of a filtered equation. It is explained how this inconsistency is the reason that flux limiters, stabilization terms, or dealiasing is often required and that the LES solution is typically mesh dependent. A consistent alternative is the direct approximation of the filtered advection term, for which we derive an exact expression based on an infinite series expansion with terms of increasing order in the filter width. We show that truncating the series expansion after few terms gives an expression that is highly correlated with the filtered advection term and a suitable LES model. A posteriori studies with decaying turbulence and a turbulent shear flow are conducted that reveal that the proposed approximation of the filtered advection term predicts improved kinetic energy spectra and filtered velocity correlations compared to classical LES.

2026-03-16T10:24:47Z Max Hausmann Berend van Wachem http://arxiv.org/abs/2607.04776v1 2026-07-06T08:07:43Z

Pulse experiments in the temporal analysis of products (TAP) reactor are one of the most important methods for studying transient kinetics of gas-solid catalytic reactions. The Y-procedure (Yablonsky et al., Chem. Eng. Sci. 62, 6754, 2007) is a model-free analysis framework for inferring the relationship between the reaction-rate $R$ and the reactant concentration $C$ from measurements of the outlet flux of gas. While elegant in conception, its application is hindered by the amplification of measurement noise that results from having to backtrack diffusive transport from the outlet to the reaction zone. Here, we explicitly recognize the inverse problem inherent in the Y-procedure and treat it using well-developed tools from the field of inverse problems. While previous implementations of the Y-procedure used Fourier-based filtering, we do not pre-process the measurements with an ad hoc noise-filter. Instead, we use a basis of localized square pulses to formulate a discrete inverse problem, whose regularized solution is obtained via the truncated singular value decomposition (TSVD) method. This method requires one to select a cutoff mode number; while we show how the choice of this regularization parameter can be guided by a Picard plot, we also develop an objective selection strategy for state defining experiments, for which $R(C)$ is a single-valued function. We apply our proposed inverse-problem approach to synthetic data corresponding to linear and nonlinear reactions and compare the results with the Fourier-filtration method. The former produces better reconstructions of the $R$ vs $C$ relationship, especially for nonlinear reactions. Our work facilitates the automation of pulse response analyses and enables the application of other discrete inverse-problem techniques, such as Tikhonov regularization or machine-learning methods.

2026-07-06T08:07:43Z 15 pages, 11 figures Anjali Aleria Evgeniy Redekop A. K. Suresh Jason R. Picardo http://arxiv.org/abs/2603.21527v2 2026-07-06T05:14:04Z

Dimensional analysis, especially Buckingham's $π$ theorem, reduces the number of variables by rewriting a relation in terms of dimensionless quantities. When variables are tied by definitions, constitutive laws, or other constraints, however, eliminating variables in advance can be awkward. We formulate dimensional analysis with constraints as linear algebra in logarithmic variables. Dimensional transformations and constraints are represented by subspaces, the effective number of independent dimensionless quantities is characterized by their intersection, and a matrix representation yields a systematic redundancy elimination procedure. Examples from falling motion, drag force, and stock-market indicators illustrate the scope and limitations of the method.

2026-03-23T03:36:35Z 17 pages, 2 figures, 1 table; substantially expanded with stock-market indicator application Umpei Miyamoto http://arxiv.org/abs/2506.20116v2 2026-07-06T05:08:18Z

Liquid marbles, droplets coated with a granular layer, are highly mobile as particles prevent capillary adhesion to the substrate. Yet their coating creates a static rolling friction, which we measure and model. Motion requires shear within the shell so that it is governed mainly by the grain density. This density controls yielding via a logistic function emerging as the particle network approaches percolation and increasing rapidly at close packing. More broadly, our system offers a simple platform for probing granular-raft mechanics and measuring their effective surface tension.

2025-06-25T04:08:54Z Yui Takai Kei Mukoyama Pritam Kumar Roy Guillaume Lagubeau David Quéré Samuel Poincloux Timothée Mouterde http://arxiv.org/abs/2604.12207v6 2026-07-06T04:47:06Z

We derive a formal statistical solution of freely decaying incompressible turbulence in arbitrary dimension \(d>1\) using Navier--Stokes loop equations. The loop Fourier transform maps smooth deterministic Cauchy data in infinite space to a one-dimensional momentum-loop quantum field theory, giving a geometric origin of spontaneous stochasticity. In bounded-variation calculus the nonlinear advection term becomes a closed-loop total derivative and cancels on the compact spherical target, leaving a diffusive momentum-loop evolution. The universal attractor is the planar Euler ensemble of rational star-polygon walks. Its continuum limit splits into two parity sectors, \(η=N\bmod 2\). Both Euler ensembles are marginally Lyapunov-stable in the continuum limit and give dimension-independent energy scaling functions \(H(k\sqrt{\tildeνt})\). Their Mellin amplitudes differ only by the odd-sector prime-\(2\) Euler factor \((1-2^{-(p+17/2)})^{-1}\). Both share the Riemann-wall poles \(p=-8+iρ_n\), generated by the non-trivial zeros \(1/2+iρ_n\) of \(ζ(s)\), while the odd ensemble also contains the dyadic wall \(p=-17/2+2πi m/\log2\), \(m\ne0\). Thus the two sectors have distinct Stokes staircases, although their spectra agree with present \(4096^3\) DNS within statistical uncertainty. Assuming the Riemann Hypothesis and simplicity of the zeros, the common Riemann-wall activations occur at \(t_n\proptoρ_n^3\) and condense into an infinite-time essential singularity.

2026-04-14T02:34:37Z 28 pages, 4 figures, revised version, ancillary supplement with detailed computations and thimble animation file included, the stability proof extended corrected in supplemental files S.3 Alexander Migdal http://arxiv.org/abs/2607.04629v1 2026-07-06T03:29:51Z

Double-diffusive convection in the ``fuzzy'' cores of giant planets has been widely discussed as a mechanism for redistributing heavy elements, but its efficiency in evolutionary models remains uncertain. Previous estimates rely on idealized compositional structures and have not treated double-diffusive transport self-consistently in planetary evolution calculations. Here we implement a prescription for transport across convective staircases in the planetary evolution code \texttt{APPLE} and apply it to post-formation interior models of Jupiter and Saturn containing compositional gradients produced during formation. These models are evolved for 4.56 Gyr including convection, diffusion, and double-diffusive transport. We find that double-diffusive convection produces limited mixing between the deep interior and the envelope. In both Jupiter and Saturn, less than $\sim 1\,M_\oplus$ of heavy material is redistributed over the full cooling history, leaving the primordial compositional gradients largely intact. This inefficiency arises because the buoyancy work available to drive compositional transport is constrained by the thermal energy budget of the deep interior, in contrast to idealized Boussinesq simulations that operate in regimes more favorable to layer merging and efficient mixing. As a result, double-diffusive convection alone cannot significantly erode the compositional gradients generated during formation. The observed heavy-element distributions in Jupiter and Saturn therefore likely require additional transport mechanisms or formation pathways, including large collisional events, that produce broader initial mixing than standard accretion models predict.

2026-07-06T03:29:51Z Submitted to AAS Journal, comments welcome J. R. Fuentes Ankan Sur David J. Stevenson Peter Bodenheimer http://arxiv.org/abs/2607.04589v1 2026-07-06T01:32:42Z

Chirality gives a microswimmer something a straight-line swimmer lacks: a phase. This variable both modulates, and is affected by, the hydrodynamic interactions between microswimmers. Here we ask what collective order emerges when many such chiral swimmers are free to move, and how the shape and actuation anisotropies of an individual swimmer dictate the outcome. Using a kinetic theory for hydrodynamically interacting circle swimmers, we show that the interplay between intrinsic rotation, stresslet flows, and Jeffery-like reorientation generates effective phase-locking interactions. Asymmetries in the actuation are encoded through a non-axisymmetric stresslet tensor. At the pair level, pusher swimmers select one of two synchronized states depending on particle shape and actuation asymmetry: in-phase/anti-phase locking, or quarter-shifted locking. Extending the analysis to many-body systems, we find that these pair-level synchronization mechanisms drive emergent collective phases. The swimmers develop global \textit{synchro-nematic} order when the hydrodynamic coupling favors parallel or anti-parallel phase locking, and \textit{synchro-antinematic} local order where quarter-shifted locking prevails. A coarse-grained field theory predicts the onset of nematic order through a hydrodynamic instability criterion. In addition, we find that the collective states exhibit crystalline or disordered hyperuniform structure arising from period-averaged hydrodynamic interactions that are effectively repulsive between swimmers. Lattice Boltzmann simulations of chiral oblate squirmers, resolving finite-size and near-field flows, recover the synchro-nematic ordering. Together, these results show how a swimmer's geometric and actuation anisotropies can be leveraged to program synchronization and spatiotemporal order in chiral active matter.

2026-07-06T01:32:42Z Anson G. Thambi Alexander N. Dodge William E. Uspal http://arxiv.org/abs/2607.04516v1 2026-07-05T21:39:16Z

This study presents a near-real-time, meter-scale three-dimensional urban wind simulation framework for low-altitude flight events in complex urban meteorological environments. It reconstructs high-resolution wind fields by combining sparse observations with efficient microscale flow modeling. The framework integrates lattice Boltzmann method large-eddy simulation (LBM-LES), high-fidelity urban morphology reconstruction that explicitly resolves real building details, and observation-driven boundary assimilation into a rapid end-to-end pipeline for realistic urban domains. Multi-site Doppler lidar measurements from dense urban Guangzhou, China, are used for evaluation. The system reconstructs three-dimensional wind fields at 5 m resolution over kilometer-scale domains within minutes. Robustness and accuracy are tested through controlled observation reduction, independent validation against withheld lidar stations, and sensitivity analyses of grid resolution and precursor domain extent. Results show stable reproduction of vertical wind structures and key local flow features under complex morphology and limited observations, providing a scalable pathway for near-real-time urban wind reconstruction.

2026-07-05T21:39:16Z Shuai Han Huanxia Wei Yue Cao Dalin Liu Lin Wen Chao Xia Shuolin Xiao Yingying Xing Qing Jia Wenguang Liang Zhigang Yang http://arxiv.org/abs/2607.04495v1 2026-07-05T20:42:09Z

Urban Air Mobility (UAM) requires reliable assessment of low-altitude wind hazards, because winds, gusts, and building-induced turbulence have been recognized as critical factors affecting vehicle stability, route feasibility, vertiport siting, and airspace management. While wind-tunnel experiments, computational fluid dynamics (CFD), multiscale downscaling, reduced-order models, and UAV planning datasets have advanced wind-aware analysis, public resources for data-driven, city-scale UAM planning remain limited in geographic coverage, scenario diversity, vertical extent, building realism, and task-oriented benchmarking. To address this gap, we introduce U3DWind, a building-resolved low-altitude wind-field dataset generated using our GPU-accelerated Lattice Boltzmann Method--Large-Eddy Simulation (LBM-LES) framework for rapid urban flow simulation. U3DWind covers five megacities in China: Beijing, Shanghai, Guangzhou, Shenzhen, and Hong Kong. It contains 720 simulations, with 16 inflow directions, three reference wind speeds, and three seasonal atmospheric scenarios (annual, summer, and winter) for each city. At a 10 m grid resolution, the dataset provides three-dimensional three-component (3D3C) velocity, turbulent kinetic energy (TKE), flow density, and fluid--solid masks. To support operationally relevant evaluation, we further define five baseline tasks: wind-field prediction, sparse-sensor wind-field reconstruction, site wind-exposure ranking, airworthiness wind-compliance risk scoring, and noise propagation modeling. As a multi-city, building-resolved 3D urban wind-field dataset, U3DWind enables systematic evaluation of wind-induced impacts in low-altitude traffic scenarios and provides an open benchmark for urban airspace management and data-driven high-fidelity urban flow simulation.

2026-07-05T20:42:09Z Shixiong Zhou Huanxia Wei Chao Xia Yingying Xing Changmin Jiang Hai Yang Shuai Jia http://arxiv.org/abs/2607.04407v1 2026-07-05T16:58:37Z

Repeated prediction of acoustic fields from spatially distributed boundary excitation is computationally expensive when each source realization requires a new wave simulation. This work introduces a quadrature-aware complex-linear boundary operator (CLBO) that maps complex normal velocity on a vibrating surface to complex pressure at receiver locations. The model couples learned source and receiver basis functions through an explicit complex surface-quadrature contraction, so the boundary excitation enters linearly by construction. This preserves complex superposition, homogeneity, and zero response to zero excitation, while representing the source through coordinates, normals, and quadrature weights rather than a fixed flattened input vector. Reference data were generated using a verified three-dimensional multiple-relaxation-time (MRT) lattice Boltzmann solver and stored in a solver-agnostic boundary-to-field format. CLBO was compared with a fixed-sensor complex DeepONet under matched case splits and optimization settings, with additional tests of structural consistency, receiver-coordinate interpolation, source discretization, source-family holdout, label efficiency, physics-informed ablations, unseen source mixtures, and computational cost. Across five training seeds, CLBO achieved a mean complex relative field error of 0.184 +/- 0.00771, compared with 0.367 +/- 0.00742 for DeepONet. Its measured source-superposition error was 1.31 x 10^-7, and its mean error on newly simulated mixed-source cases was 0.237, compared with 0.415 for DeepONet. Inference was 1.83 x 10^4 faster than the reference calculation for the reported query size. These results show that enforcing the known complex-linear boundary-to-field structure improves physical consistency and generalization under distributed acoustic excitation.

2026-07-05T16:58:37Z 27 pages, 10 figures Muhammad Idrees Khan Hua-Dong Yao http://arxiv.org/abs/2606.30907v2 2026-07-05T15:40:48Z

In this experimental and theoretical study, we assess the extensional relaxation time of sodium alginate solutions by using dripping-onto-droplet capillary breakup rheometry (DoD), e.g., the capillary thinning and breakup of viscoelastic filaments formed following the coalescence of a millimetric-nozzle-generated pendant drop with a lower droplet cap of the same fluid contained in a millimetric pool in ambient air. Hence, we extend the analyses conducted by El Khoury et al. (2026) from Newtonian to viscoelastic fluids. Our approach relies on experiments recorded with a high-speed camera using sodium alginate in deionised water, with alginate concentrations ranging from 0.1% to 9% by weight. The results are depicted by considering the dynamics of fluid filament thinning, stress balances, and scaling laws. Extensional relaxation times are resolved from the filament diameter evolution. Three flow regimes are highlighted: capillary-inertial, capillary-elastic, and mixed capillary-inertio-elastic. The findings are summarised in a two-dimensional diagram that correlates the filament breakup time with different flow regimes using the important dimensionless parameter of the problem, e.g., the intrinsic Deborah number (which relates the extensional relaxation time to the characteristic capillary-inertial time). This diagram can be used to quantify both the solution's extensional relaxation time and the liquid/air surface tension solely from filament breakup times.

2026-06-29T20:57:49Z 10 pages, 4 figures Nada Nazzal Martin Drahé Ricardo El Khoury Irineu Lopes Palhares Junior Cassio Oishi Roney Leon Thompson Loren Jørgensen Cécile Monteux Edith Peuvrel-Disdier Anselmo Pereira http://arxiv.org/abs/2607.06587v1 2026-07-05T15:21:12Z

We present CoFINN (Conservation Flux Informed Neural Networks), a physics-informed deep learning framework for predicting compressible flow fields governed by conservation laws. Unlike conventional data-driven convolutional neural networks (CNNs), which optimize only pixel-wise similarity metrics, CoFINN embeds finite-volume conservation physics directly into the training process. Unlike classical physics-informed methods which enforce differential-equation residuals at collocation points through automatic differentiation, CoFINN adopts a finite-volume perspective consistent with modern CFD methodology. CoFINN interprets CNN output fields as structured computational grids, where each pixel represents a finite-volume cell, and enforces conservation consistency through sophisticated numerical flux calculations. The framework is evaluated on transonic flow prediction around airfoils at (M=0.7, Re=6 * 10^6), including challenging conditions involving shock waves and high angles of attack. Results show that CoFINN improves aerodynamic force prediction accuracy, reducing drag prediction error by up to 34% at extreme angles of attack and by approximately 15% on average across the test set. Improvements are particularly significant in limited-data regimes, demonstrating that the conservation-based loss acts as an effective physical regularizer. The proposed approach maintains the computational efficiency advantages of CNN surrogates while significantly improving physical consistency and conservation behavior. The framework is architecture-agnostic and extensible to broader classes of conservation-law-governed physical systems.

2026-07-05T15:21:12Z 28 pages, 7 figures Adnan Harun Doğan Mert Deniz Hande Alemdar Özgür Uğraş Baran http://arxiv.org/abs/2604.08061v2 2026-07-05T08:03:25Z

Hydrogen flames exhibit multiple intrinsic instabilities. The low molar masses of H and H2 lead to significant Soret diffusion near the flame front; however, its influence on hydrogen flame instabilities remains to be quantified. This study investigates the effect of Soret diffusion on instability evolution dynamics via one-dimensional counterflow analysis and two-dimensional, high-fidelity direct numerical simulations covering both the linear growth regime and the fully developed nonlinear regime over a wide range of equivalence ratios (phi). In the linear regime, Soret diffusion increases the perturbation growth rate at phi < 1.7, especially under lean conditions, but reduces the growth rate at phi > 1.7. A similar sensitivity reversal is observed in the Markstein length near the peak equivalence ratio of unstretched laminar flame speed. In the nonlinear regime, Soret diffusion accelerates the formation of small-scale wrinkles in lean hydrogen flames and reduces the characteristic size of large-scale finger structure by one-third. An interesting observation is that, although Soret diffusion promotes preferential diffusion and increases the local flame displacement speed, the global fuel consumption rate decreases due to a reduction in the overall flame surface area. In addition, curvature-based flame segment analysis reveals a synergistic effect between Soret diffusion and Fickian diffusion that enhances/reduces the local equivalence ratio in positively/negatively curved regions of the flame front. The probability distributions of the Karlovitz number and the density-weighted displacement speed are also analyzed; results suggest that, for lean hydrogen flames, Soret diffusion broadens the distributions for both parameters, particularly on the positive side. These findings promise to advance the fundamental understanding of hydrogen flame dynamics under complex differential transport.

2026-04-09T10:24:47Z Qizhe Wen Yan Wang Linlin Yang Youhi Morii Thorsten Zirwes Shengkai Wang Zheng Chen http://arxiv.org/abs/2604.08035v2 2026-07-05T07:55:36Z

We report direct experimental observations of self-organized rotating flames of premixed CH4 and air in an open circular Hele-Shaw burner equipped with an annulus cavity flame holder. These flames formed spontaneously at sufficiently low flow rates, where flame flashback was counteracted by thermal quenching, resulting in a dynamic balance between the local flame speed and flow velocity. Unlike flames propagating in closed micro-channels, these flames exhibited stable traveling-wave patterns with heads gliding along the leading edge of the cavity, where rapid expansion created a low-speed zone that facilitated flame stabilization. At low flow rates, the rotating flames were single-headed, with their rotation frequencies roughly proportional to the laminar flame speeds, suggesting that the flame fronts traveled in a nearly constant-shape fashion. As the flow rate increased, the rotating flames split into multiple heads at approximately equal spacing, and the number of heads and rotation frequency increased with the flow rate, until these rotating flames transitioned into steady ring-shaped flames anchored at the cavity leading edge. Blow-off or extinction occurred at sufficiently high flow rates, where the flame front was pushed out of the rear side of the cavity. Parametric measurements were conducted over a wide range of equivalence ratios and flow rates, from which a regime diagram of different flame modes and their transition boundaries was obtained. Additional experiments were conducted on C3H8 and DME. It was found that the critical total mass flow rate at the rotating-steady flame transition boundary is insensitive to equivalence ratio, gap distance, and fuel type. These results should be useful not only for the fundamental understanding of flame dynamics in micro-channels but also for the practical design of micro-combustors and the application of micro-combustion technologies.

2026-04-09T09:39:30Z Xiangyu Nie Shengkai Wang http://arxiv.org/abs/2603.22116v2 2026-07-05T07:47:42Z

In this study, we report direct experimental observations of self-sustaining CH4-air rotating flames formed spontaneously in an unheated, open, circular Hele-Shaw cell. These flames are observed under fuel-rich conditions and exhibit stable traveling-wave patterns, with edge velocities that can significantly exceed the nominal flame speed of the unburned mixture. PLIF measurements across the central plane reveal that the flame front consists of a bibrachial structure, with a diffusion branch gliding along the side edges of the cell and a premixed branch extending into the interior. Complementary numerical simulations suggest that the formation of rotating flames is driven by a dynamic balance between local flame speed and unburned-gas velocity near the cell edges, where both wall heat loss and flow expansion play critical roles in stabilizing the rotation pattern. A parametric study is conducted for various equivalence ratios, flow rates, and gap distances, from which the regime diagrams of flame modes and rotation frequencies are obtained. At low flow rates, the rotating state is characterized by a single rotating flame wave, whose rotation frequency increases with flow rate. For this type of flames, a semi-empirical model is established to predict their rotation frequencies and shapes as functions of mass flow rate and surface temperature. At elevated flow rates, multiple rotating waves appear with approximately equal azimuthal spacing, and the product of the wave number and rotation frequency increases with flow rate. Mode transition from rotating flames to steady ring-shaped flames anchored at the burner edges occurs at sufficiently high flow rates, while at sufficiently low flow rates, flame extinction occurs due to thermal quenching. These findings can provide useful guidance for the advancement of micro-combustion technologies.

2026-03-23T15:42:20Z Xiangyu Nie Shengkai Wang