https://arxiv.org/api/6KyXHht5LW6lb7xJfAyyp7o4Vcw 2026-07-21T21:40:11Z 34643 210 15 http://arxiv.org/abs/2607.02395v2 2026-07-07T00:40:53Z

In canonical turbulent wall-bounded flows, the inner-scaled wall-pressure variance is empirically well described by a constant offset plus a slope logarithmic in the friction Reynolds number ($\dep$). Because the fluctuating pressure is predominantly a Poisson response to only two source terms -- a linear contribution from the mean shear coupled to a fluctuating velocity gradient, and a nonlinear contribution from the fluctuating velocity field -- the origin of this growth can be pinned down by elimination: if the linear source saturates at a Reynolds-number-independent value, the nonlinear source must carry the logarithmic growth. Here we supply the complementary evidence for inner-scaled invariance of the linear source at $\dep$ up to $O(10^4)$, using the simultaneous velocity and velocity-gradient hot-wire measurements of Zimmermann \textit{et al.} (2019 \textit{JFM}, vol. 869, pp. 182--213) acquired with a single eight-sensor probe in both a zero-pressure-gradient turbulent boundary layer and a high-Reynolds-number pipe flow. The inner-scaled factors entering the linear source collapse across Reynolds number, and the inertial-layer variance of the relevant fluctuating velocity gradient decays inversely with wall distance. Together with the established inner scaling of the mean shear, this is consistent with a linear wall-pressure contribution that, under inner normalisation, remains $O(1)$ as $\dep\to\infty$. Both source terms then trace to one structural mechanism: the near-wall depletion of mean spanwise vorticity that caps the linear source also feeds, through vortex stretching, the inertial-layer fissures that carry the growing nonlinear contribution.

2026-07-02T16:30:33Z J. M. O. Massey S. J. Zimmerman J. C. Klewicki B. J. McKeon http://arxiv.org/abs/2511.17458v3 2026-07-06T23:27:32Z

We study laminar, transitional and turbulent flow in wavy pipes using direct numerical simulations for bulk Reynolds numbers between 1-5300. Flow behaviors are analyzed in terms of the friction factor f and mean velocity statistics for strong sinusoidal wall fluctuations in axial direction. Depending on the wall amplitude k, flow reversal may appear at bulk Reynolds numbers as small as 25, inducing local recirculation zones significantly increasing friction in the laminar regime. These effects are not captured by classical models based on bulk geometric parameters, but require the definition of an effective hydraulic radius Rh as a hydrodynamic concept. Furthermore, wall modulations trigger subcritical transitions to turbulence in a Reynolds range between 500 and 1000, well below the classical threshold for smooth pipes. The DNS data suggest an upper bound for laminar persistence with a critical Reynolds number that scales as a power-law with the wall amplitude, consistent with finite amplitude transition scenarios. In the turbulent regime, flow is found to be fully rough, dominated by inertial separation and wall-induced disturbances independent of Re. Using the hydraulic radius as the characteristic length scale, the wall amplitude provides a robust estimator for the equivalent sandgrain roughness, also a hydrodynamic concept. The impact of strong wall fluctuations on laminar and turbulent friction laws, as quantified by hydraulic radius and sandgrain roughness , and the amplitude dependence of critical Reynolds number, emphasise the limitations of the Moody diagram for the flow quantification in conduits with strong wall fluctuations across all flow regimes.

2025-11-21T18:01:11Z Ismail El Mellas Juan J. Hidalgo Marco Dentz http://arxiv.org/abs/2607.05664v1 2026-07-06T22:12:59Z

We consider the dynamics of inertial particles in unsteady fluid flows. At low Reynolds numbers, where the drag force is linear in the relative velocity, it is well-known that the dynamics admit an attracting, invariant, slow manifold which emerges as the perturbation of a normally hyperbolic critical manifold. However, at high Reynolds numbers, where the drag force is quadratic in the relative velocity, the critical manifold is no longer normally hyperbolic, and therefore its persistence has remained an open problem. Here, we resolve this issue by a particular application of the blowup method, which transforms the equations of motion to a generalized weighted cylindrical coordinate system, thereby desingularizing the dynamics on the critical manifold. We subsequently prove that the critical manifold persists under sufficiently small perturbations and derive the reduced equations of motion on the perturbed slow manifold to arbitrary accuracy. Our reduced equation differs from its linear-drag counterpart in its asymptotic expansion as well as its convergence rate. Using two examples, we demonstrate the validity of our slow manifold reduction. We also showcase an application of the reduced equations to the problem of source inversion in a turbulent dispersion model.

2026-07-06T22:12:59Z Mathew Angel Mohammad Farazmand http://arxiv.org/abs/2511.12605v2 2026-07-06T20:16:35Z

We present M-OWNS, a spatial marching method that combines the carrier-wave factoring of the parabolised stability equations (PSE) with a recursive one-way Navier--Stokes (OWNS-R) projection framework. A distinct numerical resolution and efficiency advantage is offered by the approach, in modelling disturbance and instability state evolution. A spectral resolution comparison analysis shows that to leading order, for any excited eigenfunction whose eigenvalue lies closer to the carrier wavenumber than to the origin, the wave-factored system resolves the mode at a coarser streamwise numerical step size relative to the unfactored system. A non-iterating variant, with the carrier wavenumber determined from the base flow, temporal frequency and spanwise wavenumber alone, achieves equivalent resolution accuracy at identical per-step cost to unfactored OWNS. For the fixed-carrier variant, M-OWNS reduces the total solve count by factors of two to eight relative to unfactored OWNS across the test cases considered, with larger reductions possible when the iterated closure condition of PSE is suitable. The method is validated across incompressible and subsonic flat-plate boundary-layers, three-dimensional crossflow disturbances, and a Mach~4.5 hypersonic boundary-layer with four forcing configurations: eigenfunction inlet forcing, wall suction/blowing, multi-mode freestream forcing and randomised inlet forcing. The wall suction/blowing case is validated against a fully elliptic linear harmonic Navier--Stokes solver. For deterministic forcing scenarios, M-OWNS captures disturbance amplitudes, acoustic radiation fields, and modal synchronisation sequences at coarser streamwise resolution than unfactored OWNS. Under broadband randomised forcing, M-OWNS resolves mixed-mode disturbance development at half the numerical cost relative to standard OWNS.

2025-11-16T14:04:07Z E. J. Badcock S. Mughal 10.1007/s00162-026-00790-4 http://arxiv.org/abs/2510.27029v2 2026-07-06T17:34:35Z

We present a framework for Large Eddy Simulations (LES) with Immersed Boundaries (IBs) to simulate high Reynolds number flows over complex walls. In this approach, which we call Immersed Boundary-Modeled LES (IBMLES), we volume-filter the Navier-Stokes equations to derive the IB bodyforce. This also gives rise to the subfilter-scale (SFS) stress and residual viscous stress tensors, the latter of which is closed, and we expect the SFS stress can be closed with existing models. We show that the IB bodyforce can be closed by modeling the wall-slip velocity and provide two such models. The first is an algebraic model based on volume-filtering the Van-Driest velocity profile, and the second is a slip-length model. We perform an \textit{a priori} analysis by volume-filtering direct numerical simulation (DNS) data of turbulent channel flow at $\mathrm{Re}_τ=5200$ to inform these models and investigate the behavior of the other terms in this formulation. We find streamwise wall-slip velocity is significant and both models show good agreement with volume-filtered DNS data on average. Slip velocity is non-uniform and retains a signature of inner or large scale flow structures depending on filter size. SFS terms are analogous to those in traditional LES and can likely be modeled with existing SFS models such Dynamic-Smagorinsky. Residual viscous stress is significant, so it must be considered in IBMLES. We perform filtering with multiple filter types and find there is little sensitivity to the choice of filter kernel so long as it abides by the assumptions given in this framework. Based on these results, we propose a dynamic procedure for determining slip-length that will be assessed in future studies.

2025-10-30T22:23:41Z Morrison Rickard M. Houssem Kasbaoui http://arxiv.org/abs/2601.20841v4 2026-07-06T17:09:04Z

The Reynolds equation is derived from the incompressible Navier Stokes equations under the lubrication assumptions of a long and thin domain geometry and a small scaled Reynolds number. The Reynolds equation is an elliptic differential equation and a dramatic simplification from the governing equations. When the fluid domain is piecewise linear, the Reynolds equation has an exact solution that we formulate by coupling the exact solutions of each piecewise component. We consider a formulation specifically for piecewise constant heights, and a more general formulation for piecewise linear heights; in both cases the linear system is inverted using the Schur complement. These methods can also be applied in the case of non-linear heights by approximating the height as piecewise constant or piecewise linear, in which case the methods achieve second-order accuracy. We assess the time complexity of the two methods, and determine that the method for piecewise linear heights is linear time for the number of piecewise components. As an application of these methods, we explore the limits of validity for lubrication theory by comparing the solutions of the Reynolds and the Stokes equations for a variety of linear and non-linear textured slider geometries.

2026-01-28T18:44:23Z 20 pages, 13 figures Sarah Dennis Thomas G. Fai http://arxiv.org/abs/2607.05299v1 2026-07-06T16:43:02Z

This self-contained theoretical study treats incompressible, free-boundary flows in a gravitating, ideal hydromagnetic star abutting vacuum, centered on the steady field-aligned flows of Chandrasekhar, Prendergast and Tsinganos, together with a novel family of steady cross-field flows, all as solutions of the axisymmetric Tsinganos equation. In the absence of compressive waves and shocks, an incompressible fluid evolves by its frozen-in magnetic field propagating as transverse Alfvèn waves along the field lines, with pressure reacting instantly in place. The origin of the steady flows rests on the Parker theory that everywhere-continuous flows are the exception rather than the rule because of a basic propensity for tangential field/flow discontinuities. Astrophysical viscosity and electrical resistivity are not zero but are significant only over scales much smaller than macroscopic scales. Such near-ideal fluids have the same propensity for tangential discontinuities but the near-discontinuities readily dissipate by small-scale, viscous-resistive magnetic reconnections. The study treats the strictly ideal fluid separately in its own right, to construct a conceptual understanding of the turbulent creation of a steady flow in a self-organizing near-ideal fluid via irrepressible energy loss and field-topology changes as episodic reconnections run out of free energy. The study suggests that metastable storage of steady vortices and twisted fields is a natural product of the solar internal dynamo, to explain a recent, multi-instrument observation of solar-coronal eruptions persisting coherently in preferred longitudinal locations over solar-rotational timescales.

2026-07-06T16:43:02Z 21 pages, 6 figures, an internal study of the High Altitude Observatory, NSF National Center for Atmospheric Research B. C. Low S. W. McIntosh http://arxiv.org/abs/2604.10594v2 2026-07-06T16:04:55Z

The drag on an oscillating sphere is a classical fluid-mechanics problem, yet no existing theory simultaneously accounts for confinement, rotation, viscosity and magnetic fields. We consider a conducting sphere undergoing translational oscillations inside a rotating spherical cavity, modelling confined magnetohydrodynamic flows relevant to planetary interiors and liquid metal experiments. In planetary settings, these motions correspond to the polar and equatorial Slichter modes of Earth's inner core. Existing theories are restricted to separate asymptotic regimes, including viscous drag in bounded fluids (Stokes 1851), rotational effects in inviscid cavities (Busse 1974), and magnetic coupling through oscillatory boundary layers (Buffett and Goertz 1995). We derive a unified asymptotic framework for oscillatory drag in rotating spherical shells with arbitrary confinement and arbitrary electrical conductivity and magnetic permeability contrasts between the inner sphere, fluid shell and outer solid, applicable to both polar and equatorial oscillations. The theory yields expressions for added mass, viscous and electromagnetic drag, with the associated dissipation. It captures viscous pressure corrections, magnetic pressure and tension, Alfven-wave radiation, and magnetohydrodynamic Stokes-Ekman boundary layers. Classical boundary-layer theories (e.g. Ekman layers) emerge as limiting cases, while confined solutions are also derived for the diffusion-dominated bulk regimes, yielding an explicit closed-form solution for the bounded oscillatory Stokes flow and a confined extension of the inductionless theory. Direct numerical simulations validate the analytical predictions across a broad parameter range. The resulting analytical framework provides quantitative predictions of oscillatory coupling, added mass and dissipation in planetary cores, icy-moon oceans and liquid-metal experiments.

2026-04-12T12:03:23Z 78 pages, 51 figures, Reviewed version Subm. to JFM David Cébron Paolo Personnettaz http://arxiv.org/abs/2607.05135v1 2026-07-06T14:19:15Z

Fully developed isotropic turbulence exhibits a dual nature: a continuous, scale-invariant energy cascade coexists with discrete, intense vortex filaments. We show that this duality arises from a spontaneously broken SO(3) gauge symmetry. By identifying the specific angular momentum $\mathbf{L} = \mathbf{r}\times\mathbf{u}$ as a non-Abelian gauge connection and the radial velocity $u_r$ as a Higgs field, the turbulent vacuum is described by the SO(3) Georgi-Glashow model. When the radial strain condenses, the symmetry breaks SO(3) $\to$ U(1), generating a topological mass gap $M_W = gv$. This gap partitions the energy into a massless U(1) sector (the solenoidal background) that sustains the Kolmogorov cascade, and a massive SO(3)/U(1) sector that is confined to vortex filaments. Using high-resolution DNS data (JHTDB, $Re_λ\approx433$), we empirically verify three key predictions: (i) the energy spectra obey a strict 1:2 equipartition over the inertial range, with a sharp divergence at $M_W \approx 40$; (ii) the radial Higgs field extracted around isolated vortex cores follows the exact BPS monopole profile $H(r)=\coth(r/η)-η/r$ with $η= 0.0093$ domain units and the VEV $v = 0.338$, identifying the ubiquitous "worms" as macroscopic 't Hooft-Polyakov monopoles; (iii) the Wilson loop computed from the velocity field exhibits a clean area law $\langle W_C \rangle \sim e^{-σA}$ with string tension $σ= 0.303 \pm 0.009$, directly confirming the confining nature of the turbulent vacuum.

2026-07-06T14:19:15Z Ahmed Farooq http://arxiv.org/abs/2501.01875v2 2026-07-06T12:57:26Z

Dense arrays of soft hair-like structures protruding from surfaces are ubiquitous in living systems. Fluid flows can easily deform these soft hairs, which in turn impact the flow properties. At the microscale, flows are often confined which exacerbates this feedback loop: the hair deformation strongly affects the flow geometry. Here, I investigate experimentally and theoretically pressure driven flows in laminar channels obstructed by a dense array of elastic fibers or `hairs'. I show that the system displays a non-linear hydraulic resistance that I model by treating the hair bed as a deformable porous medium whose height results from the deflection of individual fibers. This fluid-structure interaction model encompassing flow in porous media, confinement, and elasticity is then leveraged to identify the key dimensionless parameter governing the problem: $\hat{f}_0$ a dimensionless drag that combines fluid, solid, and geometrical properties. Finally, I demonstrate how these results can be harnessed to design passive flow control elements for microfluidic networks.

2025-01-03T15:56:33Z J. Fluid Mech., 1028, A21 (2026) Etienne Jambon-Puillet 10.1017/jfm.2025.11060 http://arxiv.org/abs/2509.18323v3 2026-07-06T12:57:01Z

Turbulence follows a few well-known organizational principles, rooted in conservation laws. One such principle states that a system conserving two sign-definite invariants self-organizes into large-scale structures. Ordinary three-dimensional turbulence does not fall within this paradigm, but is profoundly altered when subject to rotation. In rotating turbulence, 3D inertial waves coexist alongside emergent two-dimensional structures, which tend to take the form of domain-scale flows called condensates. This interplay raises a fundamental question: why and when are 2D flows sustained if only 3D waves are excited? We develop a quasi-linear wave-kinetic theory to answer this question. We show that near-resonant interactions between 3D waves and a large-scale 2D flow impose an additional conservation law: waves must conserve their helicity separately for each helicity sign. This emergent sign-definite invariant constrains the waves to transfer their energy to large-scale 2D motions, which maintains the latter in statistical steady state. We derive analytical expressions for the 3D-2D energy transfer as a function of rotation, Reynolds number and domain geometry in a rotation dominated regime, and compare them with extensive numerical simulations of the rotating 3D Navier-Stokes equations. As rotation increases, the energy transfer from the waves to the 2D flow progressively vanishes as the two decouple, leading to a transition between distinct classes of turbulence: from 2D-dominated to 3D-dominated wave turbulence. Our theory shows that this gradual transition is caused by a depletion of modes satisfying the resonance conditions, and exhibits good agreement with numerical simulations when the number of near-resonant modes is not too small. We discuss such limitations of our theory, as well as the validity range of its underlying assumptions.

2025-09-22T18:47:46Z 36 pages, 9 figures Phys. Rev. X, 2026 Sébastien Gomé Anna Frishman 10.1103/rjxp-pcy2 http://arxiv.org/abs/2601.11424v2 2026-07-06T12:27:53Z

The time dynamics of flagellar and ciliary beating is often neglected in theories of microswimmers, with the most common models prescribing a time-constant actuation of the surrounding fluid. By explicitly introducing a metachronal wave, coarse-grained to a sinusoidal surface slip velocity, we show that a spatial resonance between the metachronal wave and the corrugation of a confining cylindrical channel enables a ciliate to swim even when it cannot move forward in a bulk fluid. Using lubrication theory, we reduce the problem to the Adler equation that reveals an oscillatory and ballistic swimming regime. Interestingly, a ciliate can even reverse its swimming direction in a corrugated channel compared to the bulk fluid.

2026-01-16T16:44:49Z G. C. Antunes C. Obst H. Stark 10.1103/c9nx-h2jk http://arxiv.org/abs/2607.04992v1 2026-07-06T12:27:49Z

Nanosecond-pulsed dielectric barrier discharge (DBD) plasma actuators were investigated on a generic blunt body in a Mach 6 Ludwieg tube to characterize the pressure and thermal perturbations relevant to hypersonic boundary-layer transition control. Complementary quiescent experiments were also conducted over ambient pressures representative of those predicted in the model nose region to isolate the influence of local thermodynamic conditions on actuator operation. Pulse-energy measurements and schlieren imaging showed that decreasing pressure reduced the deposited electrical energy per pulse, weakened the actuator-generated shock, and increased the spatial extent of the residual heated region owing to energy deposition over a larger plasma volume. Under Mach 6 Ludwieg-tube conditions, the actuator-generated shock interacted with and reflected from the detached bow shock, temporarily increasing the bow-shock stand-off distance by approximately 11%, while the residual heated region was advected downstream along the body. The schlieren images further permitted the evolution of the thermal disturbance to be distinguished from that of the actuator-generated shock. The results demonstrate two distinct perturbation mechanisms -- a short-duration compression wave and a longer-lived thermal disturbance -- whose relative importance is governed by the local thermodynamic conditions and which may independently promote hypersonic boundary-layer transition.

2026-07-06T12:27:49Z 12 pages, 4 figures Nadav Friedman Kostiantyn Kuzmenko Oshri Ifergan David Greenblatt 10.13140/RG.2.2.32693.23521 http://arxiv.org/abs/2607.04973v1 2026-07-06T12:03:21Z

A thermal convection apparatus has been designed to study turbulent super structures at high Rayleigh numbers and Prandtl numbers of the order of unity. This apparatus consists of a rectangular cell with a length of $3.50\,\mathrm{m}$, width of $0.35\,\mathrm{m}$, and variable height, which is fixed at $0.70\,\mathrm{m}$ for the present study. This cell is installed inside a $5.6\,\mathrm{m}$ long pressure vessel facility, known as \emph{Göttingen Uboot}, which can be filled with compressed gasses (air, helium, nitrogen, or sulfur hexafluoride) at pressures up to $19\,\mathrm{bar}$, enabling Rayleigh numbers up to $ Ra \leq 5\times 10^{12}$ and Prandtl numbers of approximately $0.7 \leq Pr \leq 0.9$. The convection cell is bounded vertically by top and bottom plates consisting of a three-layer composite structure in which a thin Lexan plate is sandwiched between highly conductive aluminum plates. This allows for spatially resolved heat flux measurements. Each plate is subdivided into four longitudinal segments that can be independently temperature-controlled to enable homogeneous temperatures and the imposition of horizontal temperature gradients at both the top and bottom boundaries. While the bottom plate is electrically heated, the top plate's temperature is regulated using temperature-controlled circulating pressurized water. The apparatus is well suited for precise heat flux measurements, with the results obtained being in good agreement with those previously reported in the literature.

2026-07-06T12:03:21Z 11 pages, 11 figures Hiufai Yik Constantin Schettler Eberhard Bodenschatz Umesh Madanan Stephan Weiss http://arxiv.org/abs/2607.04967v1 2026-07-06T11:54:39Z

We present a method for estimating the hydrodynamic coefficients in the Cummins equations using time-series data from a moving body, such as a floating offshore structure. The proposed data-driven method is based on incorporating the Cummins equations governing the dynamics of a structural body interacting with water waves into a physics-informed neural network (PINN), along with available motion data. The proposed method first estimates the structure's state in terms of translational and rotational degrees of freedom, and then solves the inverse problem to determine the hydrodynamic forces acting on the body, expressed in terms of added mass, damping coefficients, and/or hydrostatic restoring. The Cummins equations are formulated as a first-order system, and both state and parameter estimation are performed using PINNs. The method is verified on the free decay of a sphere and a box. The results demonstrate that it is possible to estimate the state and hydrodynamic coefficients accurately, although accuracy depends on the volume and quality of the movement data.

2026-07-06T11:54:39Z 10 pages, 3 figures, 2 tables, 26 references Anders Schou Jens Visbech Allan Peter Engsig-Karup