https://arxiv.org/api/iBIcapHjcDtAf//W/Jlf/T3DFX4 2026-07-21T19:55:37Z 34643 195 15 http://arxiv.org/abs/2607.06363v1 2026-07-07T15:00:42Z

We investigate the effect of a high concentration (32.5 g.L$^{-1}$) of sodium chloride (NaCl) on TTAB (tetradecyltrimethylammonium bromide) vertical soap films also called foam films, pulled out of a bath under controlled humidity conditions. We observe that the film lifetime increases with relative humidity, both in the presence and absence of salt. At any given humidity, the presence of NaCl systematically enhances film stability. Our film thickness measurements show that the thinning dynamics with or without salt are nearly identical down to 100 nm. Down to that thickness, the effect of evaporation can be rationalised by a constant evaporation rate, which becomes non-negligible compared to the drainage rate at film thicknesses below 400 nm. The main effect of salt is the stabilisation of a Newton black film at a thickness of approximately 5~nm, whereas in the absence of salt, the film ruptures upon reaching a critical thickness of about 10 nm.

2026-07-07T15:00:42Z Victor Ziapkoff François Boulogne Anniina Salonen Emmanuelle Rio 10.1017/jfm.2026.11757 http://arxiv.org/abs/2607.06350v1 2026-07-07T14:50:02Z

In confined turbulent rotating convection, the largest vertical velocities are found near the sidewalls in the form of wave-like structures known as wall modes. These structures persist deep into the turbulent regime, bias heat transport, and disrupt bulk flow organisation through radial jets. Controlling or suppressing wall modes is, therefore, essential for accessing bulk dynamics free from wall-induced effects. Here, we combine experiments and direct numerical simulations to investigate wall modes control in cylindrical cells equipped with ring-shaped sidewall barriers. Barriers suppress vertical-velocity maxima near the sidewall and disrupt the characteristic wave-like pattern. Simulations further show that the barriers reduce the wall-mode-induced enhancement of heat transport, shifting it towards values characteristic of laterally periodic domains. The suppression efficiency is governed by the ratio of the barrier width to the wall-mode scale and is enhanced by the addition of a second barrier. In the horizontal plane, radial jet ejections are attenuated, while the time-averaged flow reveals suppression of the boundary zonal flow (BZF), a ring-shaped region of positive azimuthal velocity near the sidewall, provided measurements are taken away from the immediate vicinity of the barriers. In this region, isotherms bend toward the poorly conducting barrier, creating a local misalignment with the isobars and inducing a baroclinic flow adjacent to the barrier faces. This effect weakens with increasing barrier conductivity or smoother geometry. These results demonstrate that sidewall barriers provide a robust route for suppressing wall modes signatures in experimental turbulent rotating convection, while locally inducing secondary baroclinic flows near the barriers. Their use enables access to extreme rotating-convection regimes with reduced sidewall influence.

2026-07-07T14:50:02Z Lázaro Martínez-Ortíz Maarten Minartz Youri H. Lemm Xander M. de Wit Herman J. H. Clercx Rudie P. J. Kunnen http://arxiv.org/abs/2607.06322v1 2026-07-07T14:22:14Z

This numerical study examines a strain-rate inconsistency in the conventional flamelet/progress-variable (FPV) formulation for non-premixed combustion and proposes an alternative coupling based on the turbulence kinetic energy dissipation rate, $\varepsilon$. Two-dimensional Reynolds-averaged Navier-Stokes (RANS) simulations of a transonic accelerating reacting mixing layer are performed using one-step kinetics, a conventional FPV model, and the proposed $\varepsilon$-$Z$ flamelet model. The analysis focuses on the relation between the RANS-computed mean strain-rate field and the local strain rate imposed on the flamelet through the coupling between the flow computation and the flamelet library. In the FPV formulation, the flamelet state is selected through a transported progress variable, whose evolution is governed by advection, diffusion, and chemical production rather than by the local strain-rate environment. The present results show that this can lead to preferential sampling of near-equilibrium flamelet states in high-strain regions, thereby weakening the intended connection between the computed flow field and the strain-rate-controlled flamelet response. In the $\varepsilon$-$Z$ formulation, $\varepsilon$ is used to infer the imposed flamelet strain rate, $S^*$, so that the local flamelet state is directly constrained by the modeled turbulence field and the pressure-dependent flammability limit. Selected species are transported explicitly, allowing products to persist through locally quenched regions, while a reactant-availability scaling limits tabulated source terms when the transported composition departs from the flamelet manifold.

2026-07-07T14:22:14Z Sylvain L. Walsh Yalu Zhu Feng Liu William A. Sirignano http://arxiv.org/abs/2607.06182v1 2026-07-07T12:06:15Z

The Richards equation (RE) is widely used to model water flow in unsaturated soils, but its performance in persistently wet grassland systems remains uncertain. This is particularly relevant in Irish grasslands, where soils often remain close to saturation for extended periods and seasonal waterlogging is common. Here, we evaluate the RE against three soil moisture datasets from County Wexford, Ireland, spanning different locations, soil types, and observation periods. We show that the standard RE formulation systematically over-predicts soil moisture under prolonged near-saturated conditions. We find that this arises from the commonly used Feddes plant water uptake function, which suppresses water losses under anaerobic conditions, despite continued evaporation from near-saturated soils. To address this limitation, we introduce a simple modification that retains a small non-zero water loss rate in the anaerobic regime. The modified model produces substantially improved agreement with observations across all three datasets. These results provide a systematic evaluation of RE-based soil moisture modelling in Irish grasslands. More broadly, they identify an important limitation of conventional RE implementations in waterlogged environments and demonstrate a practical approach for improving soil moisture predictions in persistently wet soils.

2026-07-07T12:06:15Z S Kumar S Mathias E Ruelle H Khan O Fenton K Shishkin L O'Naraigh GP Benham http://arxiv.org/abs/2604.01800v3 2026-07-07T10:09:40Z

In incompressible flow simulations, non-uniform grids efficiently capture localized flow features; however, their spatially varying resolutions severely exacerbate computational complexity. The pressure Poisson equation (PPE) formulated on these grids yields highly complex linear systems, forming the primary computational bottleneck in fractional step method. To address this, we develop an extended hybrid framework tailored for non-uniform Cartesian grids, integrating deep learning with classical iterative solvers to accelerate PPE solutions. Specifically, the framework employs a deep operator network with a U-Net-based branch network. To effectively capture spatially varying resolutions, we propose a multi-level distance vector map construction strategy that computes discrete grid-spacing information corresponding to each hierarchical level of the U-Net. This grid-spacing information is explicitly fused into feature maps prior to convolution operations. Empowered by this grid-spacing-aware architecture, the framework seamlessly extends to simulate flows interacting with solid structures using a decoupled immersed boundary projection method. By training exclusively on fabricated linear systems rather than conventional flow-dependent datasets, the model generalizes effortlessly across diverse immersed obstacle geometries with fixed network weights. Benchmark results demonstrate that the framework significantly outperforms standalone preconditioned conjugate gradient methods and its standard convolution counterpart, underscoring its exceptional potential for real-world computational fluid dynamics applications.

2026-04-02T09:13:54Z Heming Bai Dong Zhang Shengze Cai Xin Bian http://arxiv.org/abs/2510.12588v2 2026-07-07T08:26:35Z

We investigate the effective rheology of a train of elongated bubbles of negligible viscosity flowing in capillary tubes. Building upon the classical Bretherton theory for a single bubble, we extend the analysis to a train of bubbles in a single capillary tube and finally to an array of parallel, noninteracting capillary tubes, i.e., a capillary bundle. Our goal is to characterize the nonlinear pressure drop-flow rate relation of this simplified two-phase system by incorporating the thin-film hydrodynamics at small capillary numbers. We model the structural heterogeneity of the bundle by assuming that the tube radii follow a truncated power-law distribution and examine deviations of the system from the Darcy law in terms of both its statistical properties and the parameters characterizing the bubble train (i.e., the tube slenderness ratio, the volume fraction, and the number of bubbles). The main result is that two-phase flow alters the effective rheology, leading to deviations from Darcy-type behavior across the entire parameter space investigated. Specifically, for a limited number of bubbles, the flow exhibits a smooth transition from the Bretherton regime, where the pressure drop scales with the flow rate to the power of 2/3, to weaker sublinear regimes with exponents between 2/3 and unity. Interestingly, increasing the number of bubbles or narrowing the pore-size distribution leads to only minor deviations from the Bretherton regime. The resulting pressure drop-flow rate exponents are qualitatively similar to those reported in the literature for immiscible two-phase flow in porous media, despite the inherent simplicity of the capillary bundle model.

2025-10-14T14:43:14Z 20 pages, 10 figures Phys. Rev. Fluids 11, 073601, 2026 Paolo Botticini Davide Picchi Santanu Sinha Alex Hansen 10.1103/7z3l-zpzy http://arxiv.org/abs/2603.23100v2 2026-07-07T07:53:30Z

Using smoothed particle hydrodynamics (SPH) simulations, we investigate the coefficient of restitution (COR) in wet collisions and identify a scaling law governing its behavior. The simulations employ an updated-Lagrangian, mesh-free framework that is validated against experimental measurements. We neglect surface tension effects since the impact conditions correspond to a moderate-to-high Weber number regime. The COR is found to depend on the Stokes number and a dimensionless film thickness defined as the ratio of the liquid film thickness to the diameter of the impacting solid bead. Two distinct regimes are observed, each characterized by different power-law exponents.

2026-03-24T11:48:51Z Preprint Manuscript Abhishek Kumar Singh Christopher Robert Kit Windows-Yule Prapanch Nair http://arxiv.org/abs/2606.25309v2 2026-07-07T07:51:38Z

We prove a residual-work compatibility theory for positive-cone viscoelastic Reynolds states. In Oldroyd--B, the entropy cancellation eliminates incompressible transport and upper-convected stretching against polymeric stress work. After quotienting pressure tensors and spatial means, positive pressure-free residual work can be paid only by the conformation residual through the entropy-dual lever (G=I-A^{-1}). This yields the closed residual-work cone (P+(α/2)\int_{\mathbb T^d}G:S,dx\le 0), exact windowed tests, and the least-cost Hilbert-space repair; constrained closures pay through the projected lever. Strong residual-data limits preserve this cone, while weak--weak limits require the product-defect measure carried by (G:S). The augmented topology is sharp, as shown by localized residual packets. For FENE-P, the lever (G_b(C)=((b-d)/(b-\operatorname{tr}C))I-C^{-1}) makes the finite-extensibility boundary a genuine residual-work boundary.

2026-06-24T02:23:56Z Sai Peng http://arxiv.org/abs/2606.25258v4 2026-07-07T07:46:00Z

We prove endpoint continuation criteria for stress-diffusion-free incompressible viscoelastic flows by working modulo pressure. In two space dimensions, the pressure-free part of any smooth spectral isotropic stress reduces to a single active deviatoric channel (q_1(a,|Y|^2)Y), where (C=aI+Y) and (\operatorname{tr}Y=0). This scalar quotient structure allows a weighted active-deviatoric energy to cancel the top-order coupling between polymer stretching and the divergence of the active stress. On compact conformation windows the resulting high-order estimate depends only on an endpoint velocity clock and a logarithmic conformation norm. For Oldroyd--B this gives continuation of strong two-dimensional solutions under (\nabla u\in L^1_tB^0_{\infty,1}), while for FENE-P it gives continuation under (\nabla u\in L^2_tB^0_{\infty,1}). In both models the compact conformation window and logarithmic bound are derived from the velocity clock and the model barriers, rather than imposed as independent hypotheses. The criteria are formulated in integer Sobolev strong-solution classes and do not assert Leray-type weak-solution or critical-space local well-posedness results. We also identify a static operator obstruction showing the functional necessity of the logarithmic threshold for the pressure-free stress map. In three dimensions the quotient contains an additional residual channel (q_2(Y^2)^\circ), so the exact scalar closure is intrinsically two-dimensional. On prescribed compact windows this residual can be absorbed by viscosity; for Oldroyd--B and FENE-P it vanishes because (q_2\equiv0).

2026-06-24T00:33:41Z Sai Peng http://arxiv.org/abs/2607.05879v1 2026-07-07T06:20:36Z

We study topological relaxation in ordered viscoelastic conformation flows at finite epsilon. In an ordered region, a positive spectral gap selects an oriented principal axis and hence an S^2-valued director with a Hopf class. We show that a change of this class must be accompanied, before the sharp-interface limit, by one of a finite list of costs: exterior gap concentration, ordered-core mass, boundary flux, FENE/collar loss, or a topology exit. The result is proved for a concrete Landau-de Gennes ordered-core closure coupled to an Oldroyd/FENE-type transport law. The structural hypotheses used in the argument are verified up to the first typed exit time: the Morse-Bott ordered well, tubular soft coordinates, massive-mode coercivity, a projected transported Ginzburg-Landau equation, exterior gap control, and tame FENE/collar coefficients. The projected Ginzburg-Landau equation separates translation modes from the remaining residuals. The translation modes give the normal line force, while the orthogonal soft, massive, geometric, and collar terms are absorbed by coercivity or charged to the corresponding exit. A modulated-energy argument propagates a nonempty class of vortex-tube data on regular intervals. On each such interval, the normalized core measures converge to an integral one-varifold satisfying a transported forced Brakke inequality with the computed force. The theorem therefore derives the force projection, open-basin propagation, and Brakke compactness estimates before invoking any limiting Brakke flow, and it records the finite-epsilon cost when the regular ordered-core description breaks down.

2026-07-07T06:20:36Z Sai Peng http://arxiv.org/abs/2601.14043v2 2026-07-07T06:16:13Z

We investigate the robustness of a curvature-weighted spectral precursor to dissipation in freely decaying three-dimensional incompressible turbulence. Building on our recent work in \emph{Physical Review Fluids} on the Taylor--Green vortex, we analyze direct numerical simulations using the shell-summed curl-of-vorticity spectrum, denoted here by $\mathcal{C}_{4}(k,t)$ and equivalent to a $k^4$-weighted energy spectrum in the modal incompressible sense. Extending the study across multiple initial conditions -- multi-mode ABC flows, a randomized low-wavenumber ABC field, the Taylor--Green vortex, and the Kida--Pelz flow -- we find a consistent temporal ordering: the characteristic time associated with the advance and saturation of the peak wavenumber of $\mathcal{C}_{4}(k,t)$ precedes the dissipation-peak time, which in turn precedes the characteristic time associated with the peak scale of the nonlinear energy-flux spectrum. We further probe Reynolds-number and scale-separation effects using Taylor--Green simulations at additional viscosities: the precursor ordering persists when adequate scale separation and resolution are maintained, but can change in the low-$R_λ$/limited-scale-separation regime. Throughout, we use explicit inspection of curvature-weighted spectra to distinguish physical peak evolution from cutoff-proximate artifacts. These results support robustness over the deterministic decaying-flow initial conditions examined here and clarify the practical role of Reynolds number, scale separation, and resolution when using curvature-weighted spectral diagnostics in decaying turbulence.

2026-01-20T15:00:12Z Satori Tsuzuki 10.1038/s41598-026-61148-8 http://arxiv.org/abs/2607.05820v1 2026-07-07T04:34:44Z

Large-scale circular gap closure occurs over a time scale on which cell growth and proliferation become important. Growth is the main driver of the closing process, while cell dynamics such as elongation and intercalation reflect elastic and fluidic contributions to tissue deformation. We develop a novel fluidized growth-elasticity framework as a nonlinear analogue of a Maxwell fluid with growth. The framework decomposes the experimentally observable strain rate into the additive sum of the growth, elastic, and fluidic strain rates, thus enabling the separate quantification of these contributions from tissue kinematics and allowing the roles of tissue elasticity and fluidity (the inverse of viscosity) to be characterized. We apply the model to large circular gaps ($\sim$1.7 mm in diameter) in confluent monolayers of mouse embryonic epicardial cells (MEC1) under two conditions, without and with TGF-$β$ treatment. We show that both tissue fluidity and the elastic properties associated with fiber reinforcement are critical for reproducing the closure kinematics. Specifically, we predict that the treated condition has lower fluidity, associated with a lower fluidic deformation rate and a higher elastic deformation rate than the untreated condition, in agreement with the experimental observations.

2026-07-07T04:34:44Z 29 pages, 14 figues Chaozhen Wei Han Jiang Yifan Gu Nonthakorn Olaranont Pengbo Wang Qi Wen Yubing Sun Min Wu http://arxiv.org/abs/2605.19468v3 2026-07-07T03:40:41Z

We revisit a classical airfoil design problem: the search for shapes that maximize aerodynamic performance metrics, targeting the underexplored intermediate Reynolds-number regime between 1 and 3000, relevant to small animals and miniature vehicles. The problem is formally stated as the glide ratio or the endurance factor maximization for Joukowski airfoil profiles and for more general airfoil shapes with adjustable position of the maximum camber, under steady inflow. It is solved numerically by a hybrid approach combining stochastic search and direct parameter sweep, and using a steady laminar Navier--Stokes solver based on conformal mapping and second-order finite-difference discretization. Zero-thickness cambered airfoils are found to be globally optimal, within the Joukowski family, across the entire Reynolds-number range considered. The optimal angle of attack decreases monotonically with $Re$, whereas the optimal camber varies non-monotonically, reaching a pronounced maximum near $Re \approx 40-50$ before declining at higher $Re$. At low Reynolds numbers ($Re \lesssim 100$), a broad family of cambered shapes performs within a few per cent of the optimum, indicating weak sensitivity to geometrical parameters. In contrast, for $Re \gtrsim 1000$, the performance landscape becomes sharply localized around a single preferred design, for which geometric refinement is critical.

2026-05-19T07:20:56Z 11 pages, 5 figures Gleb Zhdanko Dmitry Kolomenskiy http://arxiv.org/abs/2607.05753v1 2026-07-07T02:23:43Z

Compact representations of rarefied flows must preserve kinetic observables, not only smooth macroscopic fields. We introduce Gaussian kinetic representations for discrete velocity method (DVM)-Shakhov solutions of normal shocks and a lid-driven cavity. A positive log-density phase-space model reconstructs shock velocity distribution functions (VDFs) and their moments, while a moment-field model compresses wall-bounded cavity structure. Log-density training recovers heat flux, stress, and third- and fourth-order shock moments without explicit moment supervision; the cavity representation gives a compact continuous wall-transport map.

2026-07-07T02:23:43Z Ehsan Roohi http://arxiv.org/abs/2605.13196v2 2026-07-07T01:02:33Z

Direct numerical simulation of microscale fluid--structure interactions in multicomponent and multiphase flows requires methods that can represent moving boundaries together with fields constrained to evolving interfaces. Diffuse-domain methods (DDMs) address this geometric difficulty by replacing sharp surfaces with diffuse volumetric representations on regular computational domains. Here we formulate DDMs using Onsager's variational principle. Instead of extending sharp-interface equations and boundary conditions term by term, we embed sharp-surface free-energy and dissipation functionals into the bulk through a diffuse surface delta density and derive the governing equations from the Rayleighian. The framework distinguishes balance-law fields, internal nonconserved order parameters, and kinematic or constitutive rate variables. It also clarifies a key moving-surface distinction: conserved surface densities are transported by the full material surface velocity, whereas explicitly tangential vector and tensor internal variables require projected objective or co-rotational rates within their admissible tangential state spaces. For scalar transport on rigid and deformable interfaces, and for interfacial hydrodynamics near rigid walls, the formulation recovers established DDM models and their sharp-interface limits. The same variational construction yields coupled diffuse-domain models for multicomponent deformable vesicles with surface viscosity, tangential slip, and finite areal compressibility, and for active shells carrying chemical and tangential vector order. These results provide a unified route to thermodynamically consistent passive DDMs for interfacial and surface dynamics, while allowing active stresses through active work power. The framework is relevant to soft matter, microfluidic interfaces, biological membranes, and morphogenetic surface dynamics.

2026-05-13T08:50:31Z 37 pages, 3 figures Xinpeng Xu