Scale-conditioned structure-based closure for homogeneous turbulence: Ray-Column Interacting Particle Representation Model

2026-07-15T19:05:42Z

The particle representation model (PRM) and interacting particle representation model (IPRM) describe homogeneous turbulence through orientation-conditioned structural states. In their original form, the conditional state is organized by the unit spectral direction, while the radial spectral coordinate is integrated out. We introduce a scale-conditioned Ray-Column extension in which the spectral vector is decomposed into orientation and radial wavenumber, and the conditional structure state is projected onto finite radial bands. The formulation starts from the continuum spectral tensor and is then reduced to the ray-packet ensemble sums used in the implementation. The bands are projections of an orientation-wavenumber tensor density and retain scale-conditioned structural populations for closure evaluation. The rapid dynamics remain ray-packet resolved, while the nonlinear slow and terminal closure coefficients are evaluated from band-aggregate structure tensors formed by integrating over orientation and wavenumber within each band. The present reference closure omits conservative cascade modeling among bands. A reference closure is built from PRM rapid kinematics, band-local effective-gradient response, slow rotational randomization, and an active large-scale enstrophy (LSE) terminal-drain map. In the active-LSE closure, the misalignment-sensing factor Psi_fd regularizes the LSE structure-to-dissipation map; the Ray-Column formulation evaluates this map on band-aggregate structural populations. The model is assessed in irrotational strain, homogeneous shear, elliptic-streamline, and rotating-shear configurations. The rotating-shear comparison with filtered LES data illustrates the payoff of retaining band information: filtered or low-pass observables can be formed before scale information is lost in the one-point reconstruction.

Orientation Dynamics of Rigid Fibers in a Microfluidic Burgers-like Vortex

2026-07-15T19:01:18Z

Fiber suspensions are common in biological and environmental flows and are widely used in industrial applications. Fiber transport and orientation dynamics are affected by interactions with the surrounding fluid and strongly depend on the nature of the flow. The complexity of realistic flows, which are often heterogeneous or time-dependent, hinders a full understanding of fiber dynamics. In this study, we combine microfluidic experiments, theory and numerical simulations to investigate the orientation dynamics of rigid neutrally buoyant fibers in a well-controlled model system, a streamwise stationary vortex at moderate Reynolds number. Despite the three-dimensional nature of the flow, the orientation dynamics are remarkably simple: the fiber orientation is accurately described by Jeffery equations coupled with the Burgers-vortex model. We show that fibers undergo uniform precession about the vortex axis driven by fluid vorticity while simultaneously aligning with the latter due to strain in the vortex core. These two motions are decoupled, with the alignment timescale determined by the local strain rate and the fiber aspect ratio. Finite particle size and inertia induce weak deviations from the base flow streamlines while leaving the orientational dynamics largely unaffected. These results establish a simple framework for understanding the behavior of elongated particles in stretched vortex flows, which constitute key building blocks of turbulence

Micro-macro kinetic flux-vector splitting schemes for the multidimensional Boltzmann-ES-BGK equation

2026-07-15T18:44:14Z

The kinetic Boltzmann equation models gas dynamics over a wide range of spatial and temporal scales. Simplified versions of the full Boltzmann collision operator, such as the classical Bhatnagar-Gross-Krook (BGK) and the closely related Ellipsoidal-Statistical-BGK (ES-BGK) operators, can dramatically reduce the computational cost of solving kinetic equations numerically. Classical BGK yields incorrect transport coefficients (relative to the full Boltzmann collision operator) at low Knudsen numbers, whereas ES-BGK captures them correctly. In this work, we develop a finite-volume method based on a micro-macro decomposition of the distribution function, which requires a smaller velocity mesh than direct kinetic methods for low and intermediate Knudsen numbers. The macro portion of the model is a fluid model with a moment closure derived from the heat-flux tensor calculated from the micro portion. The micro portion is obtained by applying to the original kinetic equation a projector into the orthogonal complement of the null space of the collision operator -- this projector depends on the macro portion. In particular, we extend the technique of Bennoune, Lemou, and Mieussens [{\it Uniformly stable schemes for the Boltzmann equation preserving the compressible Navier-Stokes asymptotics, J. Comput. Phys. (2008)}] to two-space dimensions, the ES-BGK collision operator, and problems with reflecting wall boundary conditions. The collision operator in the micro and macro equations is handled via L-stable implicit time discretizations, while the transport terms are computed via kinetic flux vector splitting (for the macro equations) and upwind differencing (for the micro equation). The resulting scheme is applied to various test cases in 1D and 2D. The 2D version of the code is parallelized using MPI, and we present weak- and strong-scaling studies with varying numbers of processors.

Why gas-focused microjets are so fast: kinetically resolved, shear-driven flow focusing in vacuum

2026-07-15T18:31:20Z

Gas-focused liquid microjets -- the flow-focusing sample delivery on which serial femtosecond crystallography depends -- reach speeds several times the pressure-driven (Bernoulli) bound, unexplained by continuum, local-equilibrium models that do not resolve the rarefied, hypersonic expansion of the focusing gas. We resolve that expansion with a deterministic kinetic (Shakhov--BGK) solver and couple it to the slender liquid jet. The jet is \emph{shear-driven}, not pressure-driven: the tangential stress of the hypersonic gas supplies nearly all of the axial momentum, accounting for the anomalous speed. The gas does not become ballistic behind the near field -- its stress decays as a power law and it stays coupled -- and its constitutive regime is set by a single rarefaction parameter $δ=D/\ell_0$, the orifice diameter over the source mean free path, through the thermodynamic Deborah number $De_θ\simeq K\!n\,M$ (Knudsen times Mach), whose $De_θ=1$ surface maps where the Newtonian-gas closure fails: the small-$δ$ vacuum corner where crystallography jets operate. The kinetically computed surface stress is the input for the fully non-Newtonian (viscoelastic-liquid) sequel.

Dynamics of a microroller under confinement

2026-07-15T17:23:49Z

Rotating particles can translate when placed near a surface, forming microrollers with a wide range of biomedical and microfluidic applications. In this work, we investigate the dynamics of microrollers in confined microchannels with different geometries by combining experiments, numerical simulations, and scaling analysis. In constricted channels, we find that the translational velocity of a microroller decreases as it approaches the constricted region. In both rectangular and cylindrical channels, velocity reversal occurs as the characteristic channel width decreases. Using the force-free condition for free translation, we develop a systematic scaling framework that can be generalized to different channel geometries. The scaling analysis yields functional dependences of the translational velocity on the degree of confinement, which agree well with both experiments and simulations. Importantly, we demonstrate that the viscous stress generated by the far-field rotlet flow governs the observed velocity reduction and reversal, while the translational resistance resulting from the near-field shear flow suppresses translation under tight confinement. The distinct roles of these flow components revealed by our analysis may provide practical guidance for controlling microroller dynamics in confined fluid environments.

Colloidal Suspensions can have Non-Zero Angles of Repose below the Minimal Value for Athermal Frictionless Particles

2026-07-15T16:15:36Z

We investigate the angle of repose $θ_r$ of dense suspensions of colloidal silica particles ($d = 2$ $μm$ to $7$ $μm$) in water-filled microfluidic rotating drum experiments, to probe the crossover between the thermal (colloidal) and athermal (granular) regimes. For the smallest particles, thermal agitation promotes slow creep flows, and piles always flatten completely regardless of their initial inclination angle, resulting in $θ_r = 0$. Above a critical particle size, piles of colloids stop flowing at a finite angle of repose, which increases with particle size but remains below the minimal value expected for athermal frictionless granular materials: $0 < θ_r < θ_{ath} \approx 5.8°$. We quantify the arrest dynamics as a function of the gravitational Péclet number $Pe_g$, which characterizes the competition between particle weight and thermal agitation. Our measurements are consistent with a recent rheological model [Billon et al., Phys. Rev. Fluids 8, 034302, 2023], in which the arrested state stems from a crossover between glass and jamming transitions as the granular pressure in the pile increases relative to the thermal pressure.

Metamorphosis of transition between states of limit cycle oscillations in aeroacoustic system

2026-07-15T15:45:09Z

Dynamical systems undergoing transition to oscillatory state exhibit change in the nature of the transition from supercritical to subcritical Hopf bifurcation or vice versa upon variation of a secondary parameter. This phenomenon is referred to as change of criticality. Many real-world systems undergo transition to oscillatory state that do not fit in the framework of Hopf bifurcation, and hence the change of criticality. We perform experiments on a ducted turbulent aeroacoustic flow constrained by two orifices separated at a distance apart. We vary the Reynolds number (Re), a bifurcation parameter causing a transition between various limit cycles. We change the distance between the orifices as the secondary parameter. We discover that turbulent aeroacoustic flows exhibit a metamorphosis of the transition from continuous to abrupt through a canard explosion, a bifurcation unique for its continuous yet rapid nature. We observe two distinct abrupt bifurcations, differing in their dynamical states associated with the transition. Understanding this metamorphosis from continuous to abrupt aids in developing low-cost control and preventive strategies for systems undergoing a route to oscillatory instabilities.

Evaluation of State-of-the-Art Deep Learning Architectures for Aerodynamical Predictions

2026-07-15T14:12:30Z

Surrogate models are used to substitute classical numerical solvers in engineering applications where the computational cost of the latter becomes infeasible. For instance, in aerodynamics such models offer cost-effective alternatives to computational fluid dynamics in problems such as shape optimization and load analysis, which oftentimes require high-fidelity simulations for a multitude of different parameter combinations. A specific class of deep learning-based surrogate models termed operator learning models directly approximates the solution operators to the partial differential equations underlying the physical phenomenon, thereby learning to replicate solutions to entire families of problems. However, while nowadays numerous architectures of this type get published, corresponding benchmark studies remain scarce. In this article, we advance the study of AI-based surrogate methods by thoroughly benchmarking four state-of-the-art operator learning models on their aptitude for applications in aerospace engineering. In two experiments, we assess the models' capabilities of predicting the surface pressure distribution on two-dimensional airfoil shapes of varying complexity and on an industrial-scale three-dimensional aircraft configuration. Thereby, we evaluate the models' abilities to fulfill frequent requirements in aerodynamics such as capturing discontinuities (shocks) in the solutions, scalability towards excessive amounts of mesh points and handling of data scarcity. Accompanied by a careful analysis, our findings drive forward the field of AI-based surrogate modeling by providing detailed insights into the strengths and weaknesses of the individual architectures, thus allowing to identify priorities for future developments. In particular the Bi-Stride Multi-Scale Graph Neural Network and Transolver(++) are highlighted as promising surrogate models for aerodynamical applications.

Condition for $1/f$ noise to occur along with an example for a diffusion equation

2026-07-15T14:02:44Z

While $1/f$ noise is ubiquitous and has been found in various systems, its physics remains uncertain. From an analytical study of an ordinary diffusion equation, we find an additional example of the $1/f$ noise. The formula for this example, together with existing knowledge about scaling in fluid turbulence, implies a necessary and sufficient condition for the occurrence of any stationary $1/f$ noise. That is, the noise needs to be characterized by two constant frequencies of $f_{\rm low} \ll f_{\rm high}$. For a frequency range from $f = f_{\rm low}$ to $f_{\rm high}$, it is further needed that, except for the mean amplitude of the noise, there is no other constant parameter. Then, at $f_{\rm low} \ll f \ll f_{\rm high}$, the noise scales asymptotically as $1/f$. Being statistical and simple, our condition applies to any system and hence explains the ubiquity of the $1/f$ noise. It is also applicable to some systems with noise of $α\ne 1.0$ for $1/f^α$, via intermittency analogous to that of the turbulence.

A few remarks on hyperstatistics and some applications

2026-07-15T12:53:39Z

In a recent paper [arXiv:2604.24783 (2026)], we have proposed a general approach to treat systems with inherent non-Boltzmann-Gibbsian behaviour. Given the extremely high accuracy of our approach, we have adopted the term hyperstatistics. We have applied such a statistical mechanics approach, i.e., hyperstatistics, to the discharge of a capacitor in a RC series circuit, pumping of $^4$He of a closed cycle cryostat, midrapidity data of $p$-Pb collisions at the LHC, as well as for the distribution of accelerations in turbulent systems. Here, we discuss into more details the ground of hyperstatistics. We demonstrate the versatility of hyperstatistics upon applying it to the velocity autocorrelation function in Brownian motion and also regarding its potential to describe brain dynamics.

Drawing with water waves

2026-07-15T10:40:43Z

The deterministic reproduction of complex 3D wave fields remains a significant challenge in ocean engineering. This study proposes a novel methodology for drawing arbitrary 2D curves and 3D volumetric shapes on a water surface using transient multi-directional focused waves. To overcome the limitations of conventional discrete-point focusing methods, our framework integrates Bézier curve parametrisation, equal arc-length sampling, and an Iterative Amplitude Correction (IAC) algorithm. This effectively mitigates wave height overshoot and enables precise spatial superposition of spectral components. The method's effectiveness was validated through linear wave theory and Smoothed Particle Hydrodynamics (SPH) simulations, successfully reproducing 2D characters and a 3D human face. Physical experiments in the FloWave circular wave basin further demonstrated target shape generation, such as a 2D star and 3D pyramid. Although further integration of nonlinear wave theories is necessary for high-amplitude accuracy, this technique establishes a deterministic methodology for creating arbitrary 2D and 3D surface geometries. It represents a significant advantage in wave field control for ocean engineering applications.

Libby-Fox perturbations and the semi-analytic adjoint solution for laminar viscous flow along a flat plate

2026-07-15T10:11:41Z

The properties of the solution to the adjoint two-dimensional boundary layer (BL) equations on a flat plate are investigated from the viewpoint of Libby-Fox theory, which describes the algebraic perturbations to the Blasius boundary layer. The adjoint solution is obtained from the Green's function of the perturbation equation as a sum over the infinite perturbation modes of the Blasius solution. The explicit representation of the adjoint solution allows us to derive constraints on the eigenvalues and eigenfunctions, explicitly compute the Adjoint Transport Convection (ATC) term and evaluate flow sensitivities for shape design, initial-value perturbations, and active flow control. The extension of the analysis to the case with non-zero pressure gradient, corresponding to the Falkner-Skan solution, is also briefly discussed.

The potential of quantum computers for Particle Image Velocimetry

2026-07-15T09:32:49Z

Particle Image Velocimetry (PIV) is the prime image-processing technique to measure and visualize velocity fields of laminar and turbulent flows. The velocity field vectors are obtained with sub-pixelaccuracy by analyzing cross-correlations, empowered by Fast Fourier Transforms (FFT). Here, we present a quantum algorithm with multidimensional quantum Fourier Transforms, termed Quantum-based PIV (QuPIV), to replace the classical computation of up to millions of velocity vectors. Our end-to-end quantum algorithm includes a novel state preparation, modified amplitude amplification, and the output extraction. We enhance amplitude amplification by a contracted ground-state projector, which allows a significant reduction of the number of gates in the quantum circuit. We justify the end-to-end capability with numerical studies on all stages of the algorithm on both synthetic and experimental data.

Wetting effects on the dynamics of droplets and bubbles at surfaces

2026-07-15T08:56:51Z

Dynamic wetting plays a fundamental role in the dynamics of droplets and bubbles at solid surfaces by influencing contact line motion and interfacial evolution. In this work, three representative wetting-controlled benchmarks, namely droplet splashing, bubble coalescence at solid surfaces, and bubble dynamics under shear flow, are investigated using a three-dimensional volume-of-fluid framework coupled with a recently developed dynamic wetting model based on contact line velocity reconstruction method [19]. The model is first validated against experimental observations and literature data for droplet splashing and bubble coalescence. It accurately reproduces the transient contact line evolution, splashing morphology, and coalescence dynamics. In particular, dynamic wetting suppresses the premature bubble detachment predicted by static wetting models and yields substantially improved agreement with experimental observations. In shear flow, contact angle hysteresis and contact line dissipation strongly influence bubble deformation, sliding, and detachment. These results demonstrate that accurate treatment of dynamic wetting is essential for predicting wetting-controlled droplets and bubbles involving rapid contact line motion, strong interfacial deformation, and topology changes.

Can Explicit Subgrid Models Enhance Implicit LES Simulations? A Very High-Order Solver Perspective

2026-07-15T08:37:08Z

High-order discontinuous Galerkin (DG) methods offer excellent accuracy for turbulent-flow simulations and are increasingly attractive on GPU-oriented architectures, where high polynomial orders can improve arithmetic intensity. However, very high-order under-resolved simulations remain sensitive to the balance between numerical and modeled dissipation. We investigate how explicit Vreman subgrid-scale (SGS) modeling interacts with dissipation from split-form stabilization and Riemann solvers in a DGSEM framework. Using the three-dimensional Taylor-Green vortex at Re=1600 and in the inviscid limit, we assess kinetic-energy dissipation, spectral accuracy, and stability across well-resolved, under-resolved viscous, and strongly under-resolved regimes, comparing lower- and very high-order configurations at similar degrees of freedom. The usefulness of explicit SGS modeling depends strongly on resolution, polynomial order, and the numerical dissipation already present. In the well-resolved cases considered, Vreman modeling does not improve accuracy because its active wavenumber range overlaps with the scheme's inherent dissipation. At similar degrees of freedom, lower-order simulations introduce stronger damping near the smallest resolved scales, whereas very high-order simulations preserve more spectral content but are more susceptible to high-wavenumber energy accumulation when dissipation is insufficient. Under stronger under-resolution, a weak SGS contribution can control this accumulation, while excessive SGS dissipation degrades intermediate scales. These results identify regimes in which explicit SGS modeling is beneficial, neutral, or detrimental, and provide practical guidance for selecting dissipation mechanisms in very high-order DG turbulence simulations suited to modern GPU architectures.