https://arxiv.org/api/HtHa4TE1PTJ87XqDBWLYJ8uzPu02026-04-07T08:28:43Z279536015http://arxiv.org/abs/2401.05597v4RiteWeight: Randomized Iterative Trajectory Reweighting for Steady-State Distributions Without Discretization Error2026-04-01T22:45:13ZA significant challenge in molecular dynamics (MD) simulations is ensuring that sampled configurations converge to the equilibrium or nonequilibrium stationary distribution of interest. Lack of convergence constrains the estimation of free energies, rates, and mechanisms of complex molecular events. Here, we introduce the "Randomized ITErative trajectory reWeighting" (RiteWeight) algorithm to estimate a stationary distribution from unconverged simulation data. This method iteratively reweights trajectory segments in a self-consistent way by solving for the stationary distribution of a Markov state model (MSM), updating segment weights, and employing a new random clustering in each iteration. The iterative random clustering mitigates the phase-space discretization error inherent in existing trajectory reweighting techniques and yields quasi-continuous configuration-space distributions. We present mathematical analysis of the algorithm's fixed points as well as empirical validation using both synthetic MD Trp-cage trajectories, for which the stationary solution is exactly calculable, and standard atomistic MD Trp-cage trajectories extracted from a long reference simulation. In both test systems, we find that RiteWeight corrects flawed distributions and generates accurate observables for equilibrium and nonequilibrium steady states. The results highlight the value of correcting the underlying trajectory distribution rather than using a standard MSM2024-01-11T00:03:52ZSagar KaniaRobert J. WebberGideon SimpsonDavid AristoffDaniel M. Zuckermanhttp://arxiv.org/abs/2604.01377v1A Shakhov-based Bhatnagar-Gross-Krook model for polyatomic molecules and for atomic as well as polyatomic mixtures2026-04-01T20:36:38ZThe implementation of the Shakhov Bhatnagar-Gross-Krook (SBGK) method in the open-source particle code PICLas is extended for modeling of polyatomic molecules, as well as mixtures including atoms and molecules, while accounting for non-equilibrium in the internal degrees of freedom. The conservation properties of the model are shown and the model parameter for the Prandtl number is derived. In order to determine the viscosity and thermal conductivity of gas mixtures, the first approximation of the transport properties using collision integrals is employed. The model is verified with simulation test cases of a supersonic Couette flow and a hypersonic flow around a 70° blunted cone with different flow parameters and gas compositions. The results are compared to the Direct Simulation Monte Carlo (DSMC) method as well as the Ellipsoidal Statistical BGK (ESBGK) method to assess the accuracy of the model, where overall good agreement is achieved. In particular, the proposed SBGK model captures the shock in front of the 70° blunted cone more precisely than the ESBGK model.2026-04-01T20:36:38ZMarcel PfeifferFranziska Tuttashttp://arxiv.org/abs/2604.01360v1A New Paradigm for Computational Chemistry2026-04-01T20:16:55ZComputational chemistry has become an indispensable tool for generating data and insights, pervading all branches of experimental chemistry. Its most central concept is the potential energy hypersurface, key to all chemistry and materials science, as it assigns an energy to a molecular structure, the necessary ingredient for reaction mechanism elucidation and reaction rate calculation. Density functional theory (DFT) has been the most important method in practice for obtaining such energies, which is mirrored in the use of high-performance computing hardware. In the last two decades, a new class of surrogate potential energy functions has been evolving with remarkable properties: quantum accuracy combined with force-field speed. Until very recently, their application was hampered by the fact that they needed to be trained on truly large system-specific data sets, generated before a computational chemistry study could be started (in sharp contrast to DFT, which, as a first-principles method, works out of the box, but at a far higher price of computational cost). Very recently, this roadblock has been overcome by so-called foundation machine learning interatomic potentials, which are poised to completely change the way we do computational chemistry, likely prompting us to abandon DFT as the prime method of choice for this purpose in less than a decade.2026-04-01T20:16:55Z31 pages, 1 figure, 1 tableRaphael T. HusisteinMarkus Reiherhttp://arxiv.org/abs/2604.01349v1PI-JEPA: Label-Free Surrogate Pretraining for Coupled Multiphysics Simulation via Operator-Split Latent Prediction2026-04-01T20:02:56ZReservoir simulation workflows face a fundamental data asymmetry: input parameter fields (geostatistical permeability realizations, porosity distributions) are free to generate in arbitrary quantities, yet existing neural operator surrogates require large corpora of expensive labeled simulation trajectories and cannot exploit this unlabeled structure. We introduce \textbf{PI-JEPA} (Physics-Informed Joint Embedding Predictive Architecture), a surrogate pretraining framework that trains \emph{without any completed PDE solves}, using masked latent prediction on unlabeled parameter fields under per-sub-operator PDE residual regularization. The predictor bank is structurally aligned with the Lie--Trotter operator-splitting decomposition of the governing equations, dedicating a separate physics-constrained latent module to each sub-process (pressure, saturation transport, reaction), enabling fine-tuning with as few as 100 labeled simulation runs. On single-phase Darcy flow, PI-JEPA achieves $1.9\times$ lower error than FNO and $2.4\times$ lower error than DeepONet at $N_\ell{=}100$, with 24\% improvement over supervised-only training at $N_\ell{=}500$, demonstrating that label-free surrogate pretraining substantially reduces the simulation budget required for multiphysics surrogate deployment.2026-04-01T20:02:56ZBrandon YeePairie Kohhttp://arxiv.org/abs/2604.01140v1Principal component analysis of wavefunction snapshots in non-equilibrium dynamics2026-04-01T16:57:28ZWe study non-equilibrium quantum dynamics by performing principal component analysis on the data sets of wavefunction snapshots. We show that a specific transformation of the data sets maximizes the information content in the largest principal component and further enables its connection to certain observables. This connection enables us to explain the dynamical features revealed by such a dimensionality-reduction scheme. We demonstrate this using quantum dynamics of the Heisenberg spin chain, starting from different initial states, and further extend the approach to extract higher-order correlations. Our framework should also be applicable to other unsupervised machine-learning methods based on dimensionality-reduction schemes and is highly relevant to experiments with quantum simulators, including those in higher dimensions.2026-04-01T16:57:28Z13 pages, 5 figuresDharmesh YadavDevendra Singh BhakuniBijay Kumar Agarwallahttp://arxiv.org/abs/2604.01119v1A multiphysics model for triboelectric nanogenerator design with explicit surface roughness representation2026-04-01T16:42:24ZThe design of triboelectric nanogenerators (TENGs) for efficient energy harvesting requires predictive models that capture the interplay between surface roughness, real contact area, and electrostatic behaviour across diverse tribolayer materials and roughness levels. To address this demand, this paper presents a multiphysics finite element framework that couples mechanical contact analysis with electrostatic simulations, considering exact surface roughness representations rather than idealised statistical approximations. Compared with optical interference microscopy measurements, the framework predicts the real contact area ratio more accurately than analytical models. The proposed approach captures the electrostatic behaviour by scaling the TENG surface charge density with the real contact area ratio between the rough tribolayers, computed for a given mechanical load. This method improves agreement with experiments for open-circuit voltage and capacitance relative to approximate analytical models. To represent the TENG circuit, a time-dependent ordinary differential equation is integrated, enabling evaluation of electrical responses under varying load conditions and elucidating the roles of surface roughness, mechanical load, contact-separation frequency, and resistive load. The framework provides a robust, scalable tool for performance optimisation across dielectric materials, mechanical behaviours, and operating conditions and is readily extendable to other surface-dependent energy-harvesting devices.2026-04-01T16:42:24Z38 pages, 31 figuresMD Tanzib Ehsan SanglapJack PerrisRudra MukherjeeCharchit KumarLukasz KaczmarczykChris J. PearceDaniel M. MulvihillAndrei G. Shvartshttp://arxiv.org/abs/2604.01050v1Simulated Bifurcation Quantum Annealing2026-04-01T15:54:12ZWe introduce Simulated Bifurcation Quantum Annealing (SBQA), a quantum-inspired optimization algorithm that extends simulated bifurcation by incorporating inter-replica interactions to mimic quantum tunneling. SBQA retains the efficiency and parallelism of simulated bifurcation while improving performance on sparse and rugged energy landscapes. We derive its equations of motion, analyze parameter dependence, and propose a lightweight auto-tuning strategy. A comprehensive benchmarking study on both large-scale problems and smaller instances relevant for current quantum hardware shows that SBQA systematically improves on SBM in the sparse and rugged regimes where SBM is known to struggle, while remaining competitive and versatile across a diverse set of tested problem families. These results position SBQA as a practical quantum-inspired optimization heuristic and a stronger classical baseline for the sparse and rugged regimes studied here.2026-04-01T15:54:12ZJakub PawłowskiPaweł TarasiukJan TuziemskiŁukasz PawelaBartłomiej Gardashttp://arxiv.org/abs/2604.01017v1Parameter-Efficient Fine-Tuning of Machine-Learning Interatomic Potentials for Phonon and Thermal Properties2026-04-01T15:18:56ZMachine-learning interatomic potentials are widely used as computationally efficient surrogates for density functional theory in atomistic simulations, enabling large-scale, long-time modeling of materials systems. We investigate how different fine-tuning strategies influence the prediction of harmonic phonon band structures, thermal properties, and the potential energy surface along imaginary phonon modes. We achieve substantial accuracy improvements with minimal additional data, with as few as 10 additional training structures already yielding significant gains. In addition to existing approaches, we introduce Equitrain, a finetuning framework that implements LoRA-based adaptation. Across 53 materials systems, we show that fine-tuned models consistently outperform both the underlying pretrained model and models trained from scratch. Equitrain achieves the best overall performance, and our results demonstrate that fine-tuning enables accurate phonon predictions.2026-04-01T15:18:56ZJonas GrandelPhilipp BennerJanine Georgehttp://arxiv.org/abs/2604.00949v1Two-Qubit Implementation of QAOA for MAX-CUT on an NV-Center Quantum Processor2026-04-01T14:25:40ZWe report a proof-of-principle implementation of the quantum approximate optimization algorithm (QAOA) for the smallest nontrivial MAX-CUT instance on an NV-center-based quantum processor operating at room temperature. The two-qubit register is encoded in the electron spin and the ${}^{14}\mathrm{N}$ nuclear spin of a single NV$^-$ center. Using a minimization formulation of MAX-CUT, we implement a single-layer QAOA ansatz with native entangling and single-qubit control operations. Because the optical readout of the NV$^-$ center is not projective in the computational basis, we reconstruct computational-basis populations from averaged fluorescence signals and use them to determine the experimental QAOA cost landscape by scanning the variational parameters. These results show that the core elements of QAOA can be realized on this platform and establish a baseline for future improvements in phase tracking, coherence-preserving control, and scaling to larger problem sizes.2026-04-01T14:25:40ZLeon E. RöscherTalía L. M. LezamaLuca CiminoJonah vom HofeRiccardo BassoliFrank H. P. Fitzekhttp://arxiv.org/abs/2510.19428v2Lattice-reflection symmetry in tensor-network renormalization group with entanglement filtering in two and three dimensions2026-04-01T13:34:25ZTensor-network renormalization group (TNRG) is an efficient real-space renormalization group method for studying the criticality in both classical and quantum lattice systems. Exploiting symmetries of a system in a TNRG algorithm can simplify the implementation of the algorithm and can help produce correct tensor RG flows. Although a general framework for considering a global on-site symmetry has been established, it is still unclear how to incorporate a lattice symmetry in TNRG. As a first step for lattice symmetries, we propose a method to incorporate the lattice-reflection symmetry in the context of a TNRG with entanglement filtering in both two and three dimensions (2D and 3D). To achieve this, we write down a general definition of lattice-reflection symmetry in tensor-network language. Then, we introduce a transposition trick for exploiting and imposing the lattice-reflection symmetry in two basic TNRG operations: projective truncations and entanglement filtering. Using the transposition trick, the detailed algorithms of the TNRG map in both 2D and 3D are laid out, where the lattice-reflection symmetry is preserved and imposed. Finally, we demonstrate how to construct the linearization of the TNRG maps in a given lattice-reflection sector, with the help of which it becomes possible to extract scaling dimensions in each sector separately. Our work paves the way for understanding the lattice-rotation symmetry in TNRG.2025-10-22T09:54:41Z36 pages, 5 figures, and 4 tables; rewrite the paragraphs about determining reflection charges of the descendant fields of the 2D Ising CFTXinliang LyuNaoki Kawashimahttp://arxiv.org/abs/2603.26605v2Two-branch retention behavior in unsaturated fractured rock driven by fracture-matrix flow partitioning2026-04-01T13:25:42ZUpscaling unsaturated flow in fractured rock remains challenging because fractures and matrix often exhibit sharply contrasting hydraulic behaviors across saturation states. Here, we demonstrate that unsaturated flow undergoes a transition between matrix- and fracture-dominated regimes. Three-dimensional direct numerical simulations reveal that both relative permeability and capillary pressure curves display a robust two-branch structure. We analytically derive a generalized retention formulation that identifies a critical saturation marking the transition between the two distinct retention regimes and reproduces the two-branch behavior captured in the numerical simulations. An analytical expression for the critical pressure head is further derived to represent the limiting case of fully connected fracture networks, providing a physical explanation for the retention regime shift and showing good agreement with the numerical results for systems above the percolation threshold. Our results provide a mechanistic framework for understanding and upscaling unsaturated flow in fractured rock, with broad implications for hydrology and geophysics.2026-03-27T17:03:21Z15 pages, 4 figures; Supporting Information can be found in the TeX SourceMuhammad R. AndivaChuanyin JiangMartin ZieglerQinghua Leihttp://arxiv.org/abs/2604.00815v1Stable Determinant Monte Carlo Simulations at Large Inverse Temperature $β$2026-04-01T12:22:57ZAt low temperatures $T$ where $1/T=β\gg1$ the naïve implementation of determinant quantum Monte Carlo (DQMC) methods suffers from loss of precision and numerical instabilities when evaluating the fermion determinant.
This instability propagates into the calculation of observables that rely on the evaluation of the inverse of the fermion matrix, or the Greens function.
For DQMC methods that rely on the Hamiltonian Monte Carlo (HMC) algorithm, an additional complication comes from evaluating the force terms required for integrating Hamilton's equations of motion, since here loss of precision and numerical instabilities are also prevalent.
We show how to address all these issues using various choices of matrix decompositions, allowing us to simulate at $β\gtrsim 90$, which corresponds to room temperature for graphene structures.
Furthermore, our implementation has numerical costs that scale similarly to the naïve implementation, namely as $\mathcal{O}(N_x^3N_t)$, where $N_x$ ($N_t$) is the number of spatial (temporal) sites.2026-04-01T12:22:57Z16 pages, 4 figuresThomas LuuJohann OstmeyerPetar SinilkovFinn L. Temmenhttp://arxiv.org/abs/2604.00781v1Real-time virtual circuits for plasma shape control via neural network surrogates: dynamic validation in closed-loop simulations2026-04-01T11:44:02ZReliable confinement and stable performance of tokamak fusion plasmas require accurate real-time magnetic shape control. A promising route to reduced latency and increased flexibility in plasma control systems (PCS) is to emulate physics-based controllers using neural networks. In prior work, we have demonstrated that virtual circuits (VCs), which define the poloidal field coil current vectors able to modify each plasma shape parameter independently, can be accurately emulated with neural network models trained on a large library of simulated Grad-Shafranov equilibria. This enables magnetic controllers to accurately adapt to evolving plasma equilibria, in contrast to pre-set VC schedules whose performance degrades upon departure from their reference equilibria. Here, we investigate the performance and robustness of these emulators in closed-loop simulations using the FreeGSNKE Pulse Design Tool (FPDT): a framework that couples the FreeGSNKE evolutive equilibrium solver with a virtual PCS. The FPDT models the coupling between controllers, plasma current and shape response, and actuator constraints. Using the emulated VCs within the FPDT, we demonstrate effective in-silico control of MAST Upgrade (MAST-U) plasma scenarios and show that the emulators are robust in the presence of input measurement uncertainty and under different update frequencies. These results establish the viability of neural network emulated VCs for closed-loop plasma shape control, representing a key step toward real-time deployment in the MAST-U PCS.2026-04-01T11:44:02ZK. PentlandA. RossN. C. AmoriscoP. CavestanyT. NunnA. AgnelloG. K. HoltC. Vincenthttp://arxiv.org/abs/2602.05775v4The extended gas-kinetic theory from Pullin equation: the relaxation rates, transport coefficients and model equation2026-04-01T09:32:33ZThe Borgnakke-Larsen model, widely used in rarefied flow predictions, serves as the mainstream energy-exchange kernel for polyatomic gases. However, it lacks integrability and does not guarantee detailed balance, limiting theoretical foundations for near-continuum relaxation mechanisms, transport coefficients, and relaxation model equations. In this work, we adopt the Pullin equation, which possesses an integrable collision kernel and satisfies detailed balance, to analyze near-continuum relaxation. Considering only translational and rotational degrees, we obtain explicit analytical expressions for the relaxation rates of macroscopic variables including stress, temperatures, and heat fluxes by approximating the distribution function in mixed Hermite and Laguerre spaces. Based on the same elementary moments, we derive transport coefficients via Chapman-Enskog expansion, rigorously confirming a long-standing speculation that thermal conductivity depends on the degree of thermal non-equilibrium; under equilibrium, the results reduce to those of Mason and Monchick. Using the correct relaxation rates, we propose a novel Rykov-type relaxation model that captures the coupled relaxation of translational and rotational heat fluxes, a mechanism ignored in the widely used Rykov equation. The model is validated against benchmark test cases.2026-02-05T15:36:32ZSha LiuNingchao DingMing FangHao JinRui ZhangCongshan ZhuoChengwen Zhonghttp://arxiv.org/abs/2604.00675v1Procela: Epistemic Governance in Mechanistic Simulations Under Structural Uncertainty2026-04-01T09:22:32ZMechanistic simulations typically assume fixed ontologies: variables, causal relationships, and resolution policies are static. This assumption fails when the true causal structure is contested or unidentifiable-as in antimicrobial resistance (AMR) spread, where contact, environmental, and selection ontologies compete. We introduce Procela, a Python framework where variables act as epistemic authorities that maintain complete hypothesis memory, mechanisms encode competing ontologies as causal units, and governance observes epistemic signals and mutates system topology at runtime. This is the first framework where simulations test their own assumptions. We instantiate Procela for AMR in a hospital network with three competing families. Governance detects coverage decay, policy fragility, and runs structural probes. Results show 20.4% error reduction and 69% cumulative regret improvement over baseline. All experiments are reproducible with full auditability. Procela establishes a new paradigm: simulations that model not only the world but their own modeling process, enabling adaptation under structural uncertainty.2026-04-01T09:22:32ZKinson Vernet