https://arxiv.org/api/qgd/YFw76IKZVysw29RHdYds/88 2026-04-10T17:27:02Z 27985 300 15 http://arxiv.org/abs/2508.10515v2 2026-03-20T08:29:18Z

Monitoring the degradation state of Insulated Gate Bipolar Transistor (IGBT) modules is essential for ensuring the reliability and longevity of power electronic systems, especially in safety-critical and high-performance applications. However, direct measurement of key degradation indicators - such as junction temperature, solder fatigue or delamination - remains challenging due to the physical inaccessibility of internal components and the harsh environment. In this context, machine learning-based virtual sensing offers a promising alternative by bridging the gap from feasible sensor placement to the relevant but inaccessible locations. This paper explores the feasibility of estimating the degradation state of solder layers, and the corresponding full temperature maps based on a limited number of physical sensors. Based on synthetic data of a specific degradation mode, we obtain a high accuracy in the estimation of the degraded solder area (1.17% mean absolute error), and are able to reproduce the surface temperature of the IGBT with a maximum relative error of 4.56% (corresponding to an average relative error of 0.37%).

2025-08-14T10:40:46Z Andrea Urgolo and Monika Stipsitz contributed equally to this work 2025 9th International Conference on System Reliability and Safety (ICSRS), Turin, Italy, 2025, pp. 538-547 Andrea Urgolo Monika Stipsitz Hèlios Sanchis-Alepuz 10.1109/ICSRS68021.2025.11422051 http://arxiv.org/abs/2504.05834v3 2026-03-20T07:52:18Z

We investigate the transport dynamics of elongated microparticles in microchannel flows. While smooth-walled channels preserve the dependence of particle trajectories on initial orientation and lateral position, we show that introducing periodically textured walls can trigger robust alignment of the particle along the channel centerline. This geometry-driven alignment arises from repeated reorientations generated by spatially modulated shear gradients near the textured walls. The alignment efficiency depends on particle elongation and the relative texture wavelength, with an optimal range for maximal effect. While the observed alignment behavior is not limited to low Reynolds numbers, the characteristic alignment length scale diverges as the Reynolds number increases toward the turbulent flow regime. These findings offer a predictive framework for designing microfluidic devices that passively sort or focus anisotropic particles, with implications for soft matter transport, biophysical flows, and microfluidic engineering.

2025-04-08T09:17:23Z 9 pages, 9 figures Fatemeh S. Ahmadi Hossein Hamzehpour Reza Shaebani http://arxiv.org/abs/2504.07558v3 2026-03-20T04:58:06Z

Optically addressable spin defects in wide-bandgap semiconductors are promising building blocks for quantum sensing and quantum networks. Establishing their atomic structure is essential for understanding functionality and enabling controlled engineering. In 4H-SiC, the PL5 and PL6 centers have long been recognized for their exceptional charge stability and room-temperature optically detected magnetic resonance (ODMR) performance, but their structural origin has remained elusive for over a decade. Here, we provide direct evidence for their oxygen-vacancy (${\rm O_C V_{Si}}$) origins through a combined chemical and isotopic control strategy. Under oxygen ion implantation, we observe over tenfold enhancement in the yield of PL5 and PL6 compared to nitrogen ion implantation. Furthermore, implantation with $^{17}{\rm O}$ ions produces PL5 and PL6 defects that exhibit a characteristic six-fold $^{17}{\rm O}$ hyperfine splitting in their ODMR spectra. These results affirm PL6 as the ${\rm O_C V_{Si}}$ defect in the $hh$ configuration. For PL5, the oxygen-related evidence, together with \textit{ab initio} calculations and additional measurements of the zero-field splitting and hyperfine structure, establishes it as the ${\rm O_C V_{Si}}$ defect in the $kh$ configuration. This unambiguous structural identification, achieved through materials-level chemical control, provides the microscopic foundation for deterministic engineering of these defects, paving the way for scalable photonic devices and high-sensitivity ensemble quantum sensors based on oxygen-vacancy centers.

2025-04-10T08:39:40Z 7 pages, 5 figures Yu Chen Qi Zhang Mingzhe Liu Junda Wu Jinpeng Liu Xin Zhao Jingyang Zhou Pei Yu Shaochun Lin Yuanhong Teng Wancheng Yu Ya Wang Changkui Duan Fazhan Shi http://arxiv.org/abs/2505.08368v2 2026-03-20T03:34:39Z

In this paper, by utilizing the theory of matched asymptotic expansions, an efficient and accurate neural network method, named as "MAE-TransNet", is developed for solving singular perturbation problems in general dimensions, whose solutions usually change drastically in some narrow boundary layers. The TransNet is a two-layer neural network with specially pre-trained hidden-layer neurons. In the proposed MAE-TransNet, the inner and outer solutions produced from the matched asymptotic expansions are first approximated by a TransNet with nonuniform hidden-layer neurons and a TransNet with uniform hidden-layer neurons, respectively. Then, these two solutions are combined with a matching term to obtain the composite solution, which approximates the asymptotic expansion solution of the singular perturbation problem. This process enables the MAE-TransNet method to retain the precision of the matched asymptotic expansions while maintaining the efficiency and accuracy of TransNet. Meanwhile, the rescaling of the sharp region allows the same pre-trained network parameters to be applied to boundary layers with various thicknesses, thereby improving the transferability of the method. Notably, for coupled boundary layer problems, a computational framework based on MAE-TransNet is also constructed to effectively address issues resulting from the lack of relevant matched asymptotic expansion theory in such problems. Our MAE-TransNet is compared with TransNet, PINN, and Boundary-Layer PINN on various benchmark problems including 1D linear and nonlinear problems with boundary layers, the 2D Couette flow problem, a 2D coupled boundary layer problem, and the 3D Burgers vortex problem. Numerical results demonstrate that MAE-TransNet significantly outperforms other neural network methods in capturing the characteristics of boundary layers, improving the accuracy, and reducing the computational cost.

2025-05-13T09:13:09Z Zhequan Shen Lili Ju Liyong Zhu 10.1002/nme.70307 http://arxiv.org/abs/2506.16111v3 2026-03-20T01:44:43Z

Establishing the nature of a quantum phase transition in finite-size simulations -- whether continuous, first-order, or weak first-order -- is a fundamental challenge in quantum many-body computation. Especially, the weak first-order phase transition is affected by a super large correlation length and always displays as a continuous critical point in simulated finite-sizes. The core difficulty lies in the fact that there is no effective finite-size theory to distinguish these phase transitions in the realistic simulations limited by the computational resource. In this work, we have fixed this problem by introducing a unified finite-size framework based on the Renyi thermal entropy (RTE) and its derivative (DRTE) to detect and characterize quantum phase transitions. We derive complete scaling theories for the RTE and DRTE at second-order, first-order, and weak first-order transitions, showing that the DRTE naturally isolates the singular part of the free energy and strengthens the characteristics of various phase transitions in finite sizes. Using quantum Monte Carlo simulations, we demonstrate accurate data collapse and extraction of critical exponents at (2+1)-dimensional O($N$) critical points. More importantly, the DRTE provides a smoking-gun signature of weak first-order transitions through a clear double-peak structure and a crossing at zero, which we unambiguously observe in debated deconfined quantum criticality candidates such as the $J$--$Q$ models. Our approach offers a general, unbiased, and numerically efficient tool for probing the universal properties of quantum phase transitions, resolving long-standing ambiguities between continuous and weak first-order scenarios.

2025-06-19T08:02:30Z 14 pages,5 figures Zhe Wang Yanzhang Zhu Yi-Ming Ding Zenan Liu Zheng Yan http://arxiv.org/abs/2603.19471v1 2026-03-19T21:06:42Z

Energy renormalizations of resident carriers and excitons are studied theoretically, and compared with recent experiments of electrostatically-doped WSe$_2$ monolayers. The calculated energy renormalization of resident carriers, subjected to strong out-of-plane magnetic field, reveals the importance of dynamical screening in transition metal dichalcogenides. The energy renormalization of tightly bound excitons is analyzed through the exchange interaction between the electron (or hole) component of the exciton and resident carriers that share the same spin and valley quantum numbers. Our theory explains the weak energy shift of excitonic resonances despite the strong energy renormalization of resident carriers. We identify the dependence of the energy renormalization on the envelope function of a tightly-bound exciton, showing that unlike free electron-hole pairs, this energy renormalization is not the added renormalizations of a resident electron and resident hole.

2026-03-19T21:06:42Z 13 pages, 8 figures. We welcome your feedback Dinh Van Tuan Junghwan Kim Hanan Dery http://arxiv.org/abs/2603.19458v1 2026-03-19T20:34:22Z

In this work, we investigate observable signatures of a magnetically charged Anti-de Sitter black hole in string-inspired Euler-Heisenberg theory. We analyze photon trajectories, the photon sphere, and the resulting black hole shadow. We derive the photon sphere and shadow radii and show that both deviate from the Schwarzschild and Schwarzschild-AdS cases. In particular, the radii decrease monotonically as the magnetic charge parameter $Q_m$ increases, indicating that magnetic charge modifies light propagation near the black hole. We also study neutral and charged particle motion and compute the corresponding epicyclic frequencies. Using the effective potential method, we obtain the specific energy and angular momentum for stable circular orbits and determine the innermost stable circular orbit (ISCO). The presence of $Q_m$ shifts the ISCO radius and alters the orbital structure. The radial, vertical, and orbital frequencies show clear deviations from the Schwarzschild case. Finally, we confront the model with twin-peak quasi-periodic oscillation (QPO) data from stellar-mass, intermediate-mass, and supermassive black hole candidates. A two-dimensional Delta chi-square analysis in the ($r$, $Q_m$) space shows that the best fit corresponds to $Q_m=0$, although finite values remain allowed within confidence levels. At the 1 sigma level, we obtain an upper bound $Q_m/M$ less than about 0.2. These results indicate that while magnetic charge produces measurable theoretical deviations, current QPO data place only moderate constraints on its magnitude.

2026-03-19T20:34:22Z 22 pages, 12 figures, 5 tables Faizuddin Ahmed Mohsen Fathi Ahmad Al-Badawi http://arxiv.org/abs/2603.19436v1 2026-03-19T20:02:22Z

Recent advances in nanoscale fabrication enable atomic-scale manipulation of two-dimensional (2D) materials by introducing engineered pores and perforations. This provides new opportunities to tailor functional properties of 2D materials for applications such as selective ion transport, desalination membranes, and molecular filtration. Despite this progress, the auxetic mechanical behavior of perforated 2D materials has received little attention. In this work, large-scale reactive molecular dynamics (MD) simulations, validated against experimental measurements and first-principles calculations, are employed to investigate the mechanical response of perforated monolayer titanium-based MXene metamaterials. Architectures containing rectangular perforations with straight ligaments and sinusoidally curved ligaments are systematically examined under uniaxial tension and compression over a range of geometric parameters and temperatures, from the onset of deformation to fracture. The results demonstrate that MXene metamaterials exhibit a tunable negative Poisson's ratio (NPR), which can be controlled through the perforation geometry and surface termination. Atomistic stress analysis reveals alternating in-plane shear stresses at the junctions that induce rotational deformation of the ligaments. This rotating-junction mechanism is coupled with out-of-plane deflections arising from the low bending rigidity of atomically thin materials, producing complex three-dimensional deformations. Comparison with graphene metamaterials indicates that the perforation geometry governs qualitative auxetic trends, whereas intrinsic material properties determine quantitative responses. These findings identify MXenes as a versatile candidate for the design of tunable 2D mechanical metamaterials and provide atomistic insight into the interplay between geometry, bending rigidity, and auxetic deformation mechanisms.

2026-03-19T20:02:22Z Hossein Darban http://arxiv.org/abs/2412.18482v2 2026-03-19T18:19:44Z

Mechanical and elastic properties of materials are among the most fundamental quantities for many engineering and industrial applications. Here, we present a formulation that is efficient and accurate for calculating the elastic and bending rigidity tensors of crystalline solids, leveraging interatomic force constants and long-wavelength perturbation theory. Crucially, in the long-wavelength limit, lattice vibrations induce macroscopic electric fields which further couple with the propagation of elastic waves, and a separate treatment on the long-range electrostatic interactions is thereby required to obtain elastic properties under the appropriate electrical boundary conditions. A cluster expansion of the charge density response and dielectric screening function in the long-wavelength limit has been developed to efficiently extract multipole and dielectric tensors of arbitrarily high order. We implement the proposed method in a first-principles framework and perform extensive validations on silicon, NaCl, GaAs and rhombohedral BaTiO$_3$ as well as monolayer graphene, hexagonal BN, MoS$_2$ and InSe, obtaining good to excellent agreement with other theoretical approaches and experimental measurements. Notably, we establish that multipolar interactions up to at least octupoles are necessary to obtain the accurate short-circuit elastic tensor of bulk materials, while higher orders beyond octupole interactions are required to converge the bending rigidity tensor of 2D crystals. The present approach greatly simplifies the calculations of bending rigidities and will enable the automated characterization of the mechanical properties of novel functional materials.

2024-12-24T15:13:04Z 37 pages, 7 figures, and 7 tables for main text; 45 pages with supplementary material PRX Energy 5, 013012 (2026) Changpeng Lin Samuel Poncé Francesco Macheda Francesco Mauri Nicola Marzari 10.1103/hc53-g1p3 http://arxiv.org/abs/2603.19113v1 2026-03-19T16:37:03Z

The paper describes a numerical method for solving acoustic multibody scattering problems in two and three dimensions. The idea is to compute a highly accurate approximation to the scattering operator for each body through a local computation, and then use these scattering matrices to form a global linear system. The resulting coefficient matrix is relatively well-conditioned, even for problems involving a very large number of scatterers. The linear system is amenable to iterative solvers, and can readily be accelerated via fast algorithms for the matrix-vector multiplication such as the fast multipole method. The key point of the work is that the local scattering matrices can be constructed using potentially ill-conditioned techniques such as the method of fundamental solutions (MFS), while still maintaining scalability and numerical stability of the global solver. The resulting algorithm is simple, as the MFS is far simpler to implement than alternative techniques based on discretizing boundary integral equations using Nyström or Galerkin.

2026-03-19T16:37:03Z 31 pages, 9 figures Yunhui Cai Joar Bagge Per-Gunnar Martinsson http://arxiv.org/abs/2603.19081v1 2026-03-19T16:08:35Z

Chemistry and materials science are widely regarded as potential killer application fields for quantum hardware. While the dream of unlocking unprecedented simulation capabilities remains compelling, quantum algorithm development must adapt to the evolving constraints of the emerging quantum hardware in order to accomplish any advantage for the computational chemistry practice. At the same time, the continuous advancement of classical wavefunction-theory methods narrows the window for a broad quantum advantage. Here, we explore potential benefits of quantum computation from the broader perspective of utility-scale applications. We argue that quantum algorithms need not only enable accurate calculations for a few challenging, that is strongly correlated, molecular structures, that might be hard to describe with traditional methods. Instead, they must also support the practical integration of quantum-accelerated computations into high-throughput pipelines for routine calculations on arbitrary molecules, ultimately delivering a tangible value to society.

2026-03-19T16:08:35Z 49 pages, 1 figure Davide Castaldo Markus Reiher http://arxiv.org/abs/2603.19014v1 2026-03-19T15:19:24Z

The impact of thermodiffusive effects on combustion noise in turbulent premixed slot jet flames is investigated using Direct Numerical Simulations. Two thermodiffusively unstable lean hydrogen-air flames are compared with a thermodiffusively stable stoichiometric methane-air flame with comparable laminar properties and same turbulence intensity. The hydrogen cases differ in bulk velocity, chosen to match either the turbulent flame brush length or the bulk velocity of the methane case. Thermodiffusive effects are found to strongly alter both the heat release rate fluctuations, which dominate the far-field acoustic radiation, and the flame surface dynamics. A theoretical framework extending the classical flamelet theory to thermodiffusively unstable flames is proposed and validated, relating the flame-generated sound to the time derivative of the flame surface area and to the stretch factor $I_0$. The analysis identifies flame stretch as a key mechanism promoting noise radiation in thermodiffusively unstable flames. Spectral analyses further show that hydrogen flames exhibit stronger low-frequency heat release rate fluctuations and reduced high-frequency content relative to the methane flame. This is shown to be related to the coupled action of turbulence and thermodiffusive instabilities, which enhance large-scale flame motions while attenuating small-scale flame annihilation events. Consequently, hydrogen flames radiate more strongly at low frequencies, near the acoustic peak, and exhibit a steeper high-frequency spectral roll-off. Finally, Spectral Proper Orthogonal Decomposition reveals that hydrogen non-equidiffusion intensifies shear layer instabilities between combustion products and ambient air. These results indicate that thermodiffusive effects influence both direct and indirect combustion noise generation mechanisms in hydrogen flames.

2026-03-19T15:19:24Z Francesco G. Schiavone Guillaume Daviller Davide Laera http://arxiv.org/abs/2503.03966v4 2026-03-19T15:15:35Z

An attractive way to model nuclear quantum effects is to describe select nuclei quantum mechanically at the same level as the electrons. This non-Born-Oppenheimer (non-BO) method is known by many names including the nuclear-electronic orbital (NEO) and the multicomponent method. Two basis sets are typically used for such calculations: a nuclear basis set and an electronic basis set. In this work, we investigate the convergence of non-BO proton affinities (PAs) with respect to the protonic and electronic basis sets. PAs are a sensitive measure of the proton and electron densities. We demonstrate that most protonic basis sets are sufficient for non-BO density-functional calculations of PAs, resulting in convergence to within 0.1 kcal/mol of the complete protonic basis set limit. This indicates that the truncation error is dominated by the electronic basis, and that smaller protonic basis sets could be developed. We show that non-BO calculations should use uncontracted electronic basis sets on the quantum protons. The contraction coefficients in typical electronic basis sets have been derived for point nuclear charge distributions, and uncontracting the electronic basis set on the quantized proton leads to significantly faster convergence to the electronic basis set limit. Uncontraction leads to results of one $ζ$-level higher quality with negligible additional computational cost in multiple diffuse basis set families: Jensen's polarization consistent aug-pc-X basis sets, Dunning's correlation-consistent aug-cc-pVXZ basis sets, as well as the Karlsruhe def2-XZPD basis sets. In specific, the aug-pc-3 electronic basis set already affords PAs converged beyond 0.1 kcal/mol when uncontracted on the quantum proton.

2025-03-05T23:37:24Z 15 pages, 12 figures. Added Sec IV.A and modified Sec IV.D Luukas Nikkanen Susi Lehtola http://arxiv.org/abs/2510.00878v2 2026-03-19T13:15:03Z

A modern chiral potential incorporating the three-body force is adopted to investigate bulk properties, spectra, and nuclear responses of closed-(sub)shell nuclei throughout the nuclear chart within a particle-hole (p-h) renormalized random-phase approximation (RRPA) scheme using a Hartree- Fock (HF) single-particle basis. Our analysis shows that all instabilities induced by the quasiboson approximation (QBA) underlying RPA are removed and an overall better consistency with the experiments is achieved for all observables of the investigated nuclei. The residual discrepancies point out the need of going beyond the p-h space.

2025-10-01T13:26:43Z 6 pages, 5 figures Radek Folprecht František Knapp Giovanni De Gregorio Riccardo Mancino Petr Veselý Nicola Lo Iudice http://arxiv.org/abs/2508.12987v2 2026-03-19T11:45:48Z

Transfer learning (TL) is used to extrapolate the physics information encoded in a Generative Adversarial Network (GAN) trained on synthetic neutrino-carbon inclusive scattering data to related processes such as neutrino-argon and antineutrino-carbon interactions. We investigate how much of the underlying lepton-nucleus dynamics is shared across different targets and processes. We also assess the effectiveness of TL when training data is obtained from a different neutrino-nucleus interaction model. Our results show that TL not only reproduces key features of lepton kinematics, including the quasielastic and $Δ$-resonance peaks, but also significantly outperforms generative models trained from scratch. Using data sets of 10,000 and 100,000 events, we find that TL maintains high accuracy even with limited statistics. Our findings demonstrate that TL provides a well-motivated and efficient framework for modeling (anti)neutrino-nucleus interactions and for constructing next-generation neutrino-scattering event generators, particularly valuable when experimental data are sparse.

2025-08-18T15:08:13Z 23 pages, 22 figures, together with supplement, as published in Phys. Rev. D Phys.Rev.D 113 (2026) 5, 053001 Jose L. Bonilla Krzysztof M. Graczyk Artur M. Ankowski Rwik Dharmapal Banerjee Beata E. Kowal Hemant Prasad Jan T. Sobczyk 10.1103/kwjj-wp1c