https://arxiv.org/api/xSet1uxhJWEDvRYt9PAiqJFP+Lo 2026-04-07T19:27:27Z 27953 165 15 http://arxiv.org/abs/2603.24905v1 2026-03-26T00:38:43Z

Two data-driven modal analysis approaches, proper orthogonal decomposition (POD) and dynamic mode decomposition (DMD), are applied to analyze the unsteady flow obtained by solving the Reynolds-averaged Navier-Stokes (RANS) equations in a 1.5-stage axial turbine. The reduced-order reconstructed pressure, dominant mode shapes, and dynamic features of these dominant modes in the downstream stator of the turbine are compared between POD and four DMD variants. It is found that the DMD methods based on the amplitude criterion, the Tissot criterion, and the sparsity-promoting DMD (SP-DMD) achieve reconstruction accuracy comparable to that of POD, while the frequency criterion proves unsuitable for the present problem. The second and third POD and DMD modes capture the dominant pressure fluctuation structures within the stator, and there is similarity between the corresponding POD and DMD spatial modes. The unsteady flow is primarily governed by neutral DMD modes characterized by high amplitudes and low frequencies corresponding to the basic and harmonic frequencies driven by the rotor passing frequency. While the POD analysis provides accurate reconstruction for the original snapshots, the time evolution of each POD mode does not reflect the true dynamic feature of the system. In particular, they misrepresent the fundamental frequencies of the problem. In addition, the correlations between the dominant modes in the downstream stator and the turbine adiabatic efficiency are explored across different stator clocking configurations. It is found that a clocking configuration with higher adiabatic efficiency at 50% span corresponds to a larger spatial and time component of the second and third DMD mode pair, and similarly a larger second POD mode.

2026-03-26T00:38:43Z 22 pages, 20 figures Yalu Zhu Feng Liu http://arxiv.org/abs/2603.24881v1 2026-03-25T23:53:47Z

We introduce a GPU-accelerated multigrid Gaussian-Plane-Wave density fitting (FFTDF) approach for efficient Fock builds and nuclear gradient evaluations within Kohn-Sham density functional theory, as implemented in the GPU4PySCF module of PySCF. Our CUDA kernels employ a grid-based parallelization strategy for contracting Gaussian basis function pairs and achieve up to 80% of the FP64 peak performance on NVIDIA GPUs, with no loss of efficiency for high angular momentum (up to f-shell) functions. Benchmark calculations on molecules and solids with up to 1536 atoms and 20480 basis functions show up to 25x speedup on an H100 GPU relative to the CPU implementation on a 28-core shared memory node. For a 256-water cluster, the ground-state energy and nuclear gradients can be computed in ~30 seconds on a single H100 GPU. This implementation serves as an open-source foundation for many applications, such as ab initio molecular dynamics and high-throughput calculations.

2026-03-25T23:53:47Z Rui Li Xing Zhang Qiming Sun Yuanheng Wang Junjie Yang Garnet Kin-Lic Chan http://arxiv.org/abs/2506.18811v2 2026-03-25T22:53:07Z

The accurate modeling of topology changes remains a significant challenge in geometric Volume of Fluid (VOF) simulations. When using traditional single-plane reconstruction (PLIC), fluid structures smaller than the mesh size cannot be resolved and spurious numerical breakup is triggered; this impacts important flow statistics such as drop size distributions. Recent advances have introduced paraboloid and two-plane reconstructions, which have improved high-curvature performance and enabled sub-grid film reconstructions, respectively. However, sub-grid ligament reconstructions have remained elusive. In this work, a novel cylindrical interface reconstruction strategy called PCIC is introduced for sub-grid ligament modeling. PCIC is facilitated by deriving the analytical volume moments of quadratic cylinders clipping polyhedra; this allows for exact mass conservation during volume moment transport. From the transported moments, a straight circular cylinder can be defined in the center cell of a 5x5x5 stencil. First, a quadratic principal curve is fitted to the normalized first-order moments in the stencil (the liquid barycenters), from which the cylinder's orientation and origin are approximated. The cylinder radius is then chosen to conserve volume. On-the-fly ligament detection is achieved using connected-component labeling and moments of inertia criteria, which allows for simulations to automatically choose between PLIC and PCIC in each interface cell at runtime. PCIC is demonstrated in multiphase flow test cases, where it exhibits robust reconstruction of sub-grid ligaments. This allows for relatively low-resolution PCIC simulations to provide comparable results to traditional high-resolution simulations.

2025-06-23T16:23:05Z Andrew Cahaly Valentin Wasquel Zonghao Zou Olivier Desjardins Fabien Evrard http://arxiv.org/abs/2502.12142v2 2026-03-25T22:26:41Z

Integrals involving highly oscillatory Bessel functions are notoriously challenging to compute using conventional integration techniques. While several methods are available, they predominantly cater to integrals with at most a single Bessel function, resulting in specialised yet highly optimised solutions. Here we present pylevin, a Python package to efficiently compute integrals containing up to three Bessel functions of arbitrary order and arguments. The implementation makes use of Levin's method and allows for accurate and fast integration of these highly oscillatory integrals. In benchmarking pylevin against existing software for single Bessel function integrals, we find its speed comparable, usually within a factor of two, to specialised packages such as FFTLog. Furthermore, when dealing with integrals containing two or three Bessel functions, pylevin delivers performance up to four orders of magnitude faster than standard adaptive quadrature methods, while also exhibiting better stability for large Bessel function arguments. pylevin is available from source via github or directly from PyPi.

2025-02-17T18:55:58Z 10 pages, 3 Figures, abridged version published in JOSS, comments welcome, code available via https://github.com/rreischke/levin_bessel and https://pypi.org/project/pylevin/ Journal of Open Source Software, 10(115), 8618 (2025) Robert Reischke 10.21105/joss.08618 http://arxiv.org/abs/2601.08745v2 2026-03-25T21:59:58Z

We present a first-principles framework for the calculation of phonons in nanostructures with cyclic and/or helical symmetry. In particular, we derive a cyclic- and helical-symmetry-adapted representation of the dynamical matrix at arbitrary phonon wavevectors within a variationally formulated, symmetry-adapted density functional perturbation theory framework. In so doing, we also derive the acoustic sum rules for cylindrical geometries, which include a rigid-body rotational mode in addition to the three translational modes. We implement the cyclic- and helical-symmetry-adapted formalism within a high-order finite-difference discretization. Using carbon nanotubes as representative systems, we demonstrate the accuracy of the framework through excellent agreement with periodic plane-wave results. We further apply the framework to compute the Young's and shear moduli of carbon nanotubes, as well as the scaling laws governing the dependence of ring and radial breathing mode phonon frequencies on nanotube diameter. The elastic moduli are found to be in agreement with previous density functional theory and experimental results, while the phonon scaling laws show qualitative agreement with previous atomistic simulations.

2026-01-13T17:22:56Z 15 pages, 7 figures Abhiraj Sharma Phanish Suryanarayana http://arxiv.org/abs/2603.24827v1 2026-03-25T21:31:39Z

Previous research based on electronic structure calculations and molecular dynamics (MD) simulations have demonstrated that graphdiyne (GDY) is a very suitable two-dimensional membrane for the separation of small molecules in a gas mixture of different species. However, quantum effects may play a role in the dynamics of these permeation processes when light molecules are the ones involved in the crossing of the GDY subnanometric pores. In this work we report rigorous quantum-mechanical calculations together with equivalent MD simulations of the transport of H2 molecules through a static GDY membrane, as a case study for the validity of the application to these problems of classical dynamics. The force fields employed are based on an improved Lennard-Jones formulation, with parameters optimized by means of accurate ab initio calculations. It is found that, although quantum effects are still significant at the temperatures of interest (between 250 and 350 K), MD simulations are able to reasonably reproduce the dependence of the quantum permeances with the temperature. Moreover, MD permeances computed with quantum corrections through Feynman-Hibbs effective potentials provide a lower bound to quantum permeances, while the pure classical counterpart gives an upper bound, thus leading to a well delimited range of confidence of the permeation results. Furthermore, within MD simulations it is possible to incorporate the thermal motion of the GDY layer and in this situation it is observed an enhancement of the permeances with respect to the fixed membrane case, due to a significant reduction of the permeation barriers when the GDY atoms are allowed to vibrate. It seems apparent therefore, that modeling the membrane motion is crucial to provide reliable simulations of the gas transport features.

2026-03-25T21:31:39Z Mateo Rodríguez José Campos-Martínez Marta I. Hernández 10.2139/ssrn.6429012 http://arxiv.org/abs/2501.08079v3 2026-03-25T20:08:09Z

We address the characterization of genuine network nonlocal correlations, which remain highly challenging due to the non-convex nature of local correlations even in the distinct triangle scenario with three sources and three observers implementing one four-outcome measurement. We introduce a scalable causally inferred Bayesian learning framework called the Layered Local Hidden Variable Neural Network (Layered LHV-Net) to learn the local statistics in network Bell tests. Using this framework, we identify a new class of measurement settings that exhibit the most robust nonlocality compared to previously known measurements. Remarkably, our study shows that the nonlocality measure becomes non-zero only when the visibility of the shared Bell state exceeds 0.94, surpassing previously reported noise robustness thresholds. Further, we examine correlations where shared states originate from dissimilar sources, finding that nonlocality is observed only if all the involved states are sufficiently entangled. Finally, we analyze a scenario in which the sources are allowed to share classical randomness. We find that nonlocal correlations persist even when the sources share up to 3 units of randomness, whereas a local model reproducing the quantum correlations only becomes possible when 4 units of shared randomness are available. Apart from the results, the work succeeds in showing that quantum-informed machine learning approaches as foundational frameworks can greatly benefit the field of quantum information.

2025-01-14T12:45:47Z 17 pages, 14 figures. Presented at the 16th International Conference on Quantum Communication, Measurement, and Computing (QCMC 24). For associated code file, see https://github.com/ananthrishna/GNN-LHV-k-triangle Anantha Krishnan Sunilkumar Anil Shaji Debashis Saha http://arxiv.org/abs/2603.24553v1 2026-03-25T17:28:34Z

We solve the orientation recovery of a tumbling protein in the gas phase from single-event measurements of the spatial positions of its ions after an X-ray laser induced explosion. We simulate diffracted X-ray signal and ion dynamics under experimental conditions and compare our method to conventional orientation recovery in single-particle imaging with X-ray free-electron lasers using only diffraction data. We reconstruct 3D diffraction intensities using orientations recovered from the ion signatures and retrieve the electron density with established phase-retrieval algorithms. We test our orientation recovery procedure on 56 proteins ranging from 14 to 52 kDa (1800 to 6500 atoms), achieving roughly an angular error of around 5°. The resulting 3D electron-density reconstructions are compared to ground-truth volumes simulated at the same nominal resolution, and achieve the resolution at the edge of the detector in conditions similar to current single-particle imaging setups. We investigate the reconstruction quality and demonstrate that ion data can be used for reliable orientation recovery of particles in single-particle imaging, achieving orientation on par or better than currently used recovery techniques. This work shows the potential of ion detection for retrieving additional information from the sample fragmentation, and boost single particle imaging with X-ray lasers in the cases where the diffraction signal is a limiting factor.

2026-03-25T17:28:34Z 9 pages, 4 figures Tomas André Alfredo Bellisario Nicusor Timneanu Carl Caleman http://arxiv.org/abs/2404.03961v4 2026-03-25T15:42:08Z

A statistical model for the calculation of the ionisation-cluster size distribution in nanodosimetry is proposed. It is based on a canonical ensemble and derives from the well-known nuclear droplet model. The model especially can be applied to the scenario 'low energy primaries (smaller than 100 eV) moving in nanovolumes (in the order of a few nanometers)'; a scenario to which trajectory models should not be used. The focus of this work is on presenting the model and demonstrating its feasibility.

2024-04-05T08:52:28Z Bernd Heide http://arxiv.org/abs/2603.24431v1 2026-03-25T15:38:26Z

Parametric roll is a rare but high-consequence instability that can trigger abrupt regime changes in ship response, including pronounced shifts in roll statistics and tail risk. This paper develops a data-driven surrogate that learns the nonlinear, causal functional mapping from incident wave--motion time series to vessel motions, and demonstrates that the surrogate reproduces both (i) parametric roll episodes and (ii) the associated statistical shifts in the response. Crucially, the learning framework is data-source agnostic: the paired wave--motion time series can be obtained from controlled experiments (e.g., towing-tank or basin tests with wave probes and motion tracking) when a hull exists, or from high-fidelity simulations during design when experiments are not yet available. To provide a controlled severe-sea demonstration, we generate training data with a URANS numerical wave tank, using long-crested irregular seas synthesized from a modified Pierson--Moskowitz spectrum. The demonstration dataset comprises 49 random-phase realizations for each of three sea states, simulated at a fixed forward speed selected to yield encounter conditions under which parametric-roll episodes can occur. A stacked LSTM surrogate is trained on wave-elevation time series and evaluated on held-out realizations using time-domain accuracy and distributional fidelity metrics. In the most severe case, the model tracks the onset and growth of large-amplitude roll consistent with parametric excitation, and captures the corresponding changes in roll probability density functions (PDFs). We further compare loss-function choices (MSE, relative-entropy-based objectives, and amplitude-weighted variants) and show how they trade average error for improved tail fidelity relevant to operability and risk assessment.

2026-03-25T15:38:26Z Jose del Aguila Ferrandis http://arxiv.org/abs/2512.03923v2 2026-03-25T15:34:21Z

In this paper, we adapt the Discrete Variable (DV)-Circuit Quantum-Classical Physics-Informed Neural Network (QCPINN) and apply it for the first time to four typical reservoir seepage models. These include the pressure diffusion equation for heterogeneous single-phase flow, the nonlinear Buckley-Leverett (BL) equation for simplified two-phase waterflooding, the convection-diffusion equation for compositional flow considering adsorption, and the fully coupled pressure-saturation two-phase oil-water seepage equation for heterogeneous reservoirs with exponential permeability distribution. The QCPINN integrates classical preprocessing/postprocessing networks with a DV quantum core, leveraging quantum superposition and entanglement to enhance high-dimensional feature mapping while embedding physical constraints to ensure solution consistency. We test three quantum circuit topologies (Cascade, Cross-mesh, Alternate) and demonstrate through four numerical experiments that QCPINNs achieve higher prediction accuracy than classical PINNs. Specifically, the Alternate topology outperforms others in heterogeneous single-phase flow, BL equation simulations and heterogeneous fully coupled pressure-saturation two-phase flow, while the Cascade topology excels in compositional flow with convection-dispersion-adsorption coupling. The Cross-mesh topology shows competitive early-stage convergence and accuracy across scenarios with balanced performance in coupled two-phase flow. Our work verifies the feasibility of QCPINN for reservoir engineering applications, bridging the gap between quantum computing research and industrial practice in oil and gas engineering.

2025-12-03T16:14:16Z Xiang Rao Yina Liu Yuxuan Shen http://arxiv.org/abs/2603.24370v1 2026-03-25T14:52:18Z

This paper introduces soliton_solver, an open-source GPU-accelerated software package for the simulation and real-time visualization of topological solitons in two-dimensional non-linear field theories. The software is structured around a theory-agnostic numerical core implemented using Numba CUDA kernels, while individual physical models are introduced through modular theory components. This separation enables a single computational framework to be applied across a broad class of systems, from nanoscale magnetic spin textures in condensed matter physics to cosmic strings spanning galaxies in high energy physics. The numerical backend provides finite-difference discretization, energy minimization, and GPU-resident evaluation of observables. A CUDA--PyOpenGL rendering pipeline allows direct visualization of evolving field configurations without staging full arrays through host memory. The package is distributed in Python via PyPI and supports both reproducible batch simulations and interactive exploration of metastable configurations, soliton interactions, and model-dependent initial states. We describe the software architecture, numerical workflow, and extensibility model, and we present representative example applications. We also outline how additional theories can be incorporated with minimal modification of the shared numerical infrastructure.

2026-03-25T14:52:18Z First draft: 8 pages, 3 figures, 1 metadata table and 1 table of theories Paul Leask http://arxiv.org/abs/2603.24360v1 2026-03-25T14:41:41Z

Solidification governs the microstructure and, therefore, the mechanical response of metal components, yet the atomistic details of nucleation and defect formation are often difficult to determine experimentally. Molecular dynamics can bridge this gap, but only if the interatomic model is both accurate and computationally efficient. Here, we develop a Machine Learning Potential (MLP) for aluminum and demonstrate its near ab initio fidelity when trained with the sequential-refinement workflow that fine-tunes the model on low-energy structures. The favorable scaling of the model enables nanosecond simulations involving millions of atoms, thereby overcoming finite-size effects in simulations of polycrystalline solidification and subsequent mechanical testing. Comparison with classical potentials and recent MLP models, including a general-purpose model, shows that inaccuracies in stacking-fault energetics and diffusion can lead to qualitatively incorrect solidified grain structures and post-solidification mechanical behavior. Since our framework is based on an equivariant graph neural network, it allows for straightforward extensions to multi-component systems, providing valuable guidance for the future design and fine-tuning of both specialized and universal MLPs in computational mechanics simulations.

2026-03-25T14:41:41Z 19 pages, 11 Figures Ian Störmer Julija Zavadlav http://arxiv.org/abs/2603.23285v2 2026-03-25T14:03:13Z

This work provides a brief review of the numerical methods for modelling the optical propagation of an ultrashort, intense laser pulse in plasmas and ionizable gases. These methods are implemented in an open-source simulation toolkit Axiprop, which is now actively used for design studies in the context of laser plasma acceleration of electrons (LPA). We present two examples of such studies: optical plasma waveguide generation, and phase-locked flying-focus LPA. These tools enable the identification of complex effects impacting both energy deposition during waveguide formation, and the pulse propagation dynamics that governs wakefield structure, ultimately determining the properties of the accelerated electron bunches. The developed tools and presented simulation designs are relevant to experiments on laser plasma interactions at modern high power laser facilities.

2026-03-24T14:49:07Z Igor A. Andriyash Cedric Thaury http://arxiv.org/abs/2603.24297v1 2026-03-25T13:34:47Z

We study two-dimensional periodic metamaterials in which idealised cylindrical inclusions are modelled by boundary conditions. In the scalar time-harmonic setting, the background field satisfies the Helmholtz equation, and high-contrast inclusion limits reduce to Dirichlet or Neumann conditions, with direct analogues in dielectric and acoustic media. By switching the condition assigned to selected inclusions, we break point-group symmetries of the primitive cell and thereby lift symmetry-induced degeneracies in the Floquet--Bloch spectrum of hexagonal and square lattices, opening valley-type band gaps with Berry curvature localised near opposite valleys. To analyse infinite and finite structures within a unified framework, we derive matched-asymptotic point-scatterer approximations for mixed Dirichlet--Neumann arrays. For doubly periodic systems, this yields a finite-dimensional generalised eigenvalue problem for the Floquet--Bloch spectrum; for finite arrays, it yields a generalised Foldy multiple-scattering system. In both hexagonal and square lattices, geometrically identical crystals can realise distinct valley-Hall phases solely through boundary-condition assignment while retaining an overlapping bulk gap. Spatially varying this assignment therefore creates and relocates internal interfaces without altering the underlying geometry, enabling the associated valley-Hall interfacial modes to be repositioned within the same crystal.

2026-03-25T13:34:47Z Richard Wiltshaw Henry J. Putley Christelle Bou Dagher Mehul P. Makwana