https://arxiv.org/api/SKR+4mis1JE9lIbR09kSIZL4xA8 2026-06-21T07:41:18Z 9445 900 15 http://arxiv.org/abs/2410.21532v1 2024-10-28T21:01:30Z

In this study, we investigate and compare formulations for computing shape derivatives in bi-material level-set optimization with precise modeling of the interface. The level-set function is parameterized using B-splines, whose coordinates serve as design variables. A precise mechanical model is obtained every design cycle, replicating the exact geometry of the bi-material design, using untrimming techniques and IGA on unstructured meshes. Design sensitivities are formulated by either a "discretize-then-differentiate" or a "differentiate-then-discretize" approach. A detailed comparative study shows the limitations of the latter in terms of accuracy, specifically when stresses near the material interface dominate the stress field. The precise representation of the interface facilitates an accurate evaluation of interfacial stresses, and the consistent discretized sensitivities enable to minimize them directly -- highlighting the main advantage of our framework. Furthermore, reducing the discretized approach by considering only interface control points and a selective set of adjacent control points provides an ideal trade-off between accuracy and numerical efficiency. This lays the foundations for multi-material shape and topology optimization procedures, considering accurate responses on the interface.

2024-10-28T21:01:30Z 22 pages Majd Kosta Oded Amir http://arxiv.org/abs/2410.21530v1 2024-10-28T20:55:24Z

A design framework to implement non-unitary input-output operations to a practical unitary photonic integrated circuit is described. This is achieved by utilising the cosine-sine decomposition to recover the unitarity of the original operation. The recovered unitary operation is decomposed into fundamental unitary building blocks, forming a photonic integrated circuit network based on directional couplers and waveguide phase shifters. The individual building blocks are designed and optimised by three-dimensional full-wave simulations and scaled up using a circuit approach. The paper investigates the scalability and robustness of the design approach. Our study demonstrates that the proposed approach of performing unitary matrix completion can be applied to any arbitrary matrices. This design approach allows for implementation of non-unitary operations to perform various linear functions in neuromorphic photonics for computing, sensing, signal processing and communications.

2024-10-28T20:55:24Z 19 pages, 5 figures Optical and Quantum Electronics 2025 Hussein Talib Phillip D. Sewell Ana Vukovic Sendy Phang 10.1007/s11082-024-07957-5 http://arxiv.org/abs/2410.20951v1 2024-10-28T12:10:44Z

We propose a novel framework based on neural network that reformulates classical mechanics as an operator learning problem. A machine directly maps a potential function to its corresponding trajectory in phase space without solving the Hamilton equations. Most notably, while conventional methods tend to accumulate errors over time through iterative time integration, our approach prevents error propagation. Two newly developed neural network architectures, namely VaRONet and MambONet, are introduced to adapt the Variational LSTM sequence-to-sequence model and leverage the Mamba model for efficient temporal dynamics processing. We tested our approach with various 1D physics problems: harmonic oscillation, double-well potentials, Morse potential, and other potential models outside the training data. Compared to traditional numerical methods based on the fourth-order Runge-Kutta (RK4) algorithm, our model demonstrates improved computational efficiency and accuracy. Code is available at: https://github.com/Axect/Neural_Hamilton

2024-10-28T12:10:44Z 33 pages, 8 figures, 9 tables Tae-Geun Kim Seong Chan Park http://arxiv.org/abs/2408.13916v2 2024-10-28T12:08:04Z

The behavior of the electromagnetic field near a common edge of a resistive half-plane and a perfectly conducting wedge is investigated. The possible appearance besides power terms also of logarithmic functions in the field expansions at specific angles between a resistive plane and the sides of the wedge is indicated. It is shown that in the main terms of the electric or magnetic field components perpendicular to the edge, logarithmic functions appear only in two particular cases: when a half-plane forms a straight angle with one of the sides of the conducting wedge, or when the external angle of the conducting wedge is a right one. Otherwise, the main terms of all components have a purely power character and can be determined by the Meixner method. To confirm the efficiency of accounting for the found field distribution law, transversal wave numbers of the dominant mode of a rectangular waveguide with a resistive film in the diagonal plane is calculated.

2024-08-25T19:02:00Z Extended version of the work presented at the URSI Symposium, and published in Radiotekhnika i elektronika (Russian version), 1989, vol. 34, no. 4, pp. 734-741 Proceedings of the 1989 URSI International Symposium on Electromagnetic Theory, Stockholm, Sweden, 1989, pp. 88-90 I. M. Braver P. Sh. Fridberg Kh. L. Garb I. M. Yakover http://arxiv.org/abs/2410.20434v1 2024-10-27T13:25:08Z

Recently, a universal relation between the thermal expansion coefficient of glasses $α_g$, their glass-transition temperature Tg, and the so-called fragility index m of the corresponding supercooled liquid state was found to be valid for more than 200 glass formers, namely $α_g/m\propto 1/T_g$ [P. Lunkenheimer et al., Nat. Phys. 19, 694 (2023)]. Here we show that this could also have far-reaching consequences for our understanding of crystal melting. Namely, when considering the empirically founded 2/3-rule, stating that the ratio of Tg and the melting temperature Tm is about 2/3 for almost all materials, for crystals a similar relation, $α_c/m\propto 1/T_m$, should apply. Indeed, we find that the available experimental data are well consistent with such a relation. This implies that the melting of a crystal into an ordinary (non-supercooled) liquid is influenced by the fragility, a property quantifying the non-Arrhenius dynamics in the supercooled-liquid state of the material. We argue that this can be explained by a significant enhancement of the "ideal" (non-cooperative) melting temperature arising from the cooperativity of the particle motion in the liquid state above Tm. Therefore, a reassessment of the currently widely accepted microscopic understanding of crystal melting, still founded on the general ideas that lead to the time-honored Lindemann melting criterion, may be necessary.

2024-10-27T13:25:08Z 9 pages, 3 figures + 6 pages Supplemental Material Phys. Rev. B 110 (2024), 134110 P. Lunkenheimer K. Samwer A. Loidl 10.1103/PhysRevB.110.134110 http://arxiv.org/abs/2410.20001v1 2024-10-25T22:50:25Z

An experimental setup capable, in principle, to test the isotropy of the {\em one way} propagation of light to 1 part in $10^8$ (or better), is suggested.

2024-10-25T22:50:25Z 16 pages, 11 figures Reinaldo J. Gleiser http://arxiv.org/abs/2402.11171v2 2024-10-25T03:35:00Z

Constraining molecules in simulations (such as with constant bond lengths and/or angles) reduces their degrees of freedom (DoF), which in turn affects temperature calculations in those simulations. When local temperatures are measured, e.g. from a set of atoms in a subvolume or from velocities in one Cartesian direction, the result can appear to unphysically violate equipartition of the kinetic energy if the local DoF are not correctly calculated. Here we determine how to correctly calculate local temperatures from arbitrary Cartesian component kinetic energies, accounting for general geometric constraints, by self-consistently evaluating the DoF of atoms subjected to those constraints. The method is validated on a variety of test systems, including systems subject to a temperature gradient and those confined between walls. It is also shown to provide a sensitive test for the breakdown of kinetic energy equipartition caused by the approximate nature of numerical integration or insufficient equilibration times. As a practical demonstration, we show that kinetic energy equipartition between C and H atoms connected by rigid bonds can be violated even at the commonly-used time step of 2 fs, and that this equipartition violation appears to usefully indicate configurational overheating.

2024-02-17T02:40:55Z 14 pages of main text and 4 pages of Supporting Information. This version includes more details and examples Journal of Chemical Theory and Computation 20 (23), 10615-10624 (2024) Stephen Sanderson Shern R. Tee Debra J. Searles 10.1021/acs.jctc.4c00957 http://arxiv.org/abs/2309.03205v2 2024-10-24T08:12:44Z

The Sommerfeld-Page equation describes the non-relativistic dynamics of a classical electron modeled by a sphere of finite size with a uniform surface charge density. The Sommerfeld-Page equation is a delay differential equation, and almost no exact results on solutions of this equation was known. However, the progress has been made, especially in the last few years, and recently an analytical solution was found for an almost identical delay differential equation, which arose in the context of mathematical modeling of COVID-19 epidemics. Inspired by this research, we offer a pedagogical exposition of how one can find an analytical solution of the Sommerfeld-Page equation.

2023-08-16T17:48:24Z 11 pages, no figures, version published in American Journal of Physics Am. J. Phys. 92 (2024), 864-871 Zurab K. Silagadze 10.1119/5.0156685 http://arxiv.org/abs/2410.16789v1 2024-10-22T08:04:44Z

Moving-boundary work, also called pressure-volume work or expansion work, is perhaps the main form of work discussed in introductory courses about Thermodynamics. Here, we take a particular definition of this kind of thermodynamic work. On this basis, we show with simple reasoning that significant phenomena involving dissipation of mechanical energy, often mentioned as well in those courses but with a vague formalization, can be traced back right to moving-boundary processes. We refer in particular to the conversion of external work into internal energy in paddle-wheel experiments such as the one conducted by J.P.Joule in 1850, and to other processes involving friction.

2024-10-22T08:04:44Z Eur. J. Phys. 45, 065101 (2024) Andrea Crespi 10.1088/1361-6404/ad8052 http://arxiv.org/abs/2410.16674v1 2024-10-22T04:14:09Z

We demonstrate that bound states in the continuum (BICs) form continuous lines along high-symmetry directions of momentum space in a simple phononic crystal slab. Contrary to common sense, these BICs are symmetry-protected (SP) BICs not only at the center of the Brillouin zone (gamma point) but also off the gamma point. We utilize numerical simulations, a group theory method, and a mode expansion method to comprehensively understand the formation of the BICs. It is revealed that these BICs correspond to phase singularity lines of far-field radiation, and the phase winding number can be defined as a topological index. This makes the BICs topologically protected and robust to any parameter variation that maintains periodicity and rotational symmetry. Finally, the generation of the BICs lines is experimentally demonstrated.

2024-10-22T04:14:09Z Lin Yang Riyi Zheng Sheng Zhang Wenshuai Zhang Qiujiao Du Pai Peng Ziyu Wang Manzhu Ke Xueqin Huang Fengming Liu http://arxiv.org/abs/2410.16087v1 2024-10-21T15:11:24Z

A new analytical model for the generation of axisymmetric tornado-type vortices has been developed. A solution to the nonlinear equation for the stream function in an unstable stratified atmosphere is obtained and analyzed within the framework of ideal hydrodynamics. The solution is sought by smooth connecting continuous solutions for the internal region ("eye"), the central region ("wall" with maximum velocities) and the external region of the tornado. Expressions describing radial dependences for the radial and vertical velocity components include combinations of Bessel functions. The vortex is spatially localized by radius and height. Convective instability of a stratified atmosphere leads to an increase in the radial and vertical components of velocities according to the hyperbolic sine law. A downward flow is observed near the tornado axis. The maximum speed of the upward flow is achieved at a certain radial distance at a certain height. Below this height, radial flows converge towards the central part of the tornado, and above this height there is an outflow from the "wall" to the axis and to the periphery. The radial structure of the azimuthal velocity is determined by the structure of the initial disturbance and can change with height. Maximum rotation is achieved in the tornado "wall" at a certain height. The increase in azimuthal velocity can occur according to a superexponential law. Possible structures of movements, scenarios for the development of a tornado and its dynamics are discussed.

2024-10-21T15:11:24Z 36 pages, 11 figures Physics of Fluids, Vol. 36, Issue 8, 086607 (2024) S. N. Artekha 10.1063/5.0213431 http://arxiv.org/abs/2410.18132v1 2024-10-20T07:49:49Z

Based on the electron-ion model, parameters of ball and bead lightning are calculated. The model allows us to estimate maximum size of ball lightning, its energy content, electric charge and magnetic field, to determine equilibrium conditions between positively charged ions located inside and outer shell containing rapidly moving electrons. An explanation is given to the fact that shells are observed inside ball lightning that differ from each other in color of glow. The model describes structure of not only ball lightning, but also bead lightning. The long-term stability of bead lightning is associated with the balance of neighboring beads under action of magnetic force of their attraction and electric force of repulsion, which exceed in magnitude the force of wind pressure.

2024-10-20T07:49:49Z 34 pages Journal of Atmospheric and Solar-Terrestrial Physics, Vol. 265, 106374 (2024) Sergey G. Fedosin 10.1016/j.jastp.2024.106374 http://arxiv.org/abs/2410.14482v1 2024-10-18T14:05:52Z

We report the existence of hydrostatic equilibrium states for a composite body made of two rigidly rotating, homogeneous layers bounded by spheroidal surfaces, where the core has a prolate shape. These new configurations require an oblate envelope that spins faster than the core. No solution with a prolate envelope is found. For some parameters, the prolate core can even be at rest. Numerical experiments based on the self-consistent field method support this result in the case of heterogeneous layers with polytropic equations of state. The possible cancellation of the first gravitational moment, $J_2$, is discussed.

2024-10-18T14:05:52Z Accepted for publication in A&A. 7 pages, 4 figures, 4 tables Clément Staelen Jean-Marc Huré Anaïs Meunier Pauline Noé http://arxiv.org/abs/2410.14124v1 2024-10-18T02:41:12Z

We introduce an additive approach for the design of a class of transformable structures based on two-bar linkages ("scissor mechanisms") joined at vertices to form a two dimensional lattice. Our discussion traces an underlying mathematical similarity between linkage mechanisms, origami, and kirigami and inspires our name for these structures: karigami. We show how to design karigami which unfold from a one dimensional collapsed state to two-dimensional surfaces of single and double curvature. Our algorithm for growing karigami structures is provably complete in providing the ability to explore the full space of possible mechanisms, and we use it to computationally design and physically realize a series of examples of varying complexity.

2024-10-18T02:41:12Z Noah Toyonaga L Mahadevan http://arxiv.org/abs/2410.14736v1 2024-10-16T22:13:49Z

A previous work introduced pair space, which is spanned by the center of mass of a system and the relative positions (pair positions) of its constituent bodies. Here, I show that in the $N$-body Newtonian problem, a configuration that does not remain on a fixed line in space is a central configuration if and only if it conserves all pair angular momenta. For collinear systems, I obtain a set of equations for the ratios of the relative distances of the bodies, from which I derive some bounds on the minimal length of the line. For the non-collinear case I derive some geometrical relations, independent of the masses of the bodies. These are necessary conditions for a non-collinear configuration to be central. They generalize, to arbitrary $N$, a consequence of the Dziobek relation, which holds for $N=4$.

2024-10-16T22:13:49Z 17 pages, no figures Alon Drory