https://arxiv.org/api/W9y66BMUSyulFovAx6hmu6aSkF4 2026-06-14T18:56:03Z 9441 765 15 http://arxiv.org/abs/2502.01175v1 2025-02-03T09:10:57Z

Energy noise indicators are generally used to characterize the exposure of populations to transportation noise in relation to their long-term annoyance, but they do not adequately reflect the repetitive nature of noise peaks generated by railway traffic. The GENIFER project aims to test a study protocol designed to rank railway noise events according to the instantaneous annoyance they cause to residents. This study will be carried out in a sector exposed to railway noise in the {Î}le-de-France region and will require the recruitment of 60 volunteer local residents. It will propose the use of innovative tools for collecting information, including an electronic remote-control allowing participants to rate the annoyance they feel when trains pass by, and noise sensor instrumentation allowing the simultaneous collection of the acoustic characteristics of railway noise peaks. It also includes semi-directive interviews and a questionnaire to identify co-determinants of annoyance. The instantaneous annoyance scores collected will also be compared with those obtained from commented listening to sound samples of passing trains. In addition to assessing the acceptability of the protocol by the participants, this study aims to validate the feasibility of ranking railway noise events according to their acoustic characteristics in terms of the annoyance expressed.

2025-02-03T09:10:57Z Forum Acusticum 2023, European Acoustics Association, Sep 2023, Turin, Italy M Sineau F Mietlicki D Bernfeld S Cherfan L Motio-Betato M Hellot A-S Evrard J-P Regairaz C Rosin http://arxiv.org/abs/2502.01173v1 2025-02-03T09:07:42Z

Railway transportation contributes to the objectives of decarbonization but also generates negative externalities, including noise. Energy noise indicators used to characterize population exposure do not adequately reflect the repetitive nature of railway noise peaks. The GENIFER pilot study aims to test a protocol designed to characterize railway noise events according to the instantaneous perceived annoyance when the train is passing, in order to improve understanding of the influence of acoustic factors on annoyance. The first phase of the survey was carried out in 2023 among 62 residents of a pilot site. An electronic device was used to collect around 5,000 ratings, ranging from 1 to 10, assessing the instantaneous annoyance induced by railway noise at passing trains. The site instrumentation included sixteen sound level meters and two video recording systems, enabling annoyance ratings to be associated with the acoustic characteristics of railway noise events. A questionnaire aimed at identifying co-determinants of long-term annoyance was also administered to participants. Feedback on the field implementation of this survey and initial results concerning acoustic measurements, instantaneous annoyance ratings and questionnaire responses will be presented.

2025-02-03T09:07:42Z INTERNOISE 2024, French Acoustical Society, Aug 2024, Nantes, France Matthieu Sineau SNCF RESEAU Manuel Hellot SNCF RESEAU Robin Mafféïs SNCF RESEAU Fanny Mietlicki SNCF RESEAU Laure Motio SNCF RESEAU Anne-Sophie Evrard SNCF RESEAU Jean-Philippe Regairaz SNCF RESEAU http://arxiv.org/abs/1007.1097v4 2025-02-02T11:56:37Z

In the linear theory of hydrodynamic stability up to now there exist examples of flows for which there is full quantitative distinction, as for cylindrical Hagen-Poiseuille (HP) flow in a pipe with round section, between theory conclusions and experimental data on the threshold Reynolds number Reth. In the present work, we show that to get a conclusion of linear instability of the HP flow for finite Reynolds numbers Re, it is necessary to abandon the use of traditional 'normal' form of disturbances which assumes an opportunity of separation of variables describing disturbances variability depending on radial and longitudinal (along the pipe axis) coordinates. In the result of the absence of such variables separation, in the suggested linear theory, it is proposed to use Bubnov-Galerkin's approximation method modification that gives an opportunity to account longitudinal variability periods distinctions for different radial modes defined a priori in the result of standard Galerkin-Cantorovich's method to the equation of evolution of extremely small axially symmetric velocity field tangential component disturbances. We found that when considering even two linearly interacting radial modes for the HP flow, linear instability is possible only when there exists mentioned above conditionally periodic longitudinal along the pipe axis disturbance variability when Re_th(p) very sensitively depends on the ratio p of two longitudinal periods each of which describes longitudinal variability for its own radial mode only. Obtained for the HP flow linear instability realization minimal value Re_th=448 (when p=1.527) quantitatively agrees with the Tolmin-Shlihting waves in the boundary layer emergence, where also Re_th=420. We get quantitative agreeing of the phase velocity values of the considered disturbances with experimental data on the fronts of the turbulent 'puffs' spreading in the pipe.

2010-07-07T10:23:12Z 15 pages, 2 figures Journal of Experimental and Theoretical Physics, vol.119, 331 (2014) Sergey G. Chefranov Alexander G. Chefranov 10.1134/S1063776114070127 http://arxiv.org/abs/2502.04336v1 2025-01-30T15:11:51Z

The present work is aimed at formulating equivalent boundary conditions for the electromagnetic field on the surface of a periodic grating of resistive strips valid for arbitrary incident fields. It is assumed that the period of the grating is much smaller than the wavelength. We obtain two-sided boundary conditions of impedance type that allow one to replace any flat grating of resistive strips with a plane of discontinuity of the electromagnetic field.

2025-01-30T15:11:51Z 24 pages, 4 figures Igor M. Braver Khona L. Garb http://arxiv.org/abs/2501.18366v1 2025-01-30T14:17:12Z

Single-beam acoustical tweezers are used to manipulate individual microbubbles and provide quantitative measurements of the local shear modulus of soft hydrogels. The microbubbles are directly generated by electrolysis of the hydrogel and their displacement is detected using optical microscopy in the focal plane of a focused vortex beam. Microbubbles displaced off-axis can be pulled by a restoring radial force component that forms a stable two-dimensional trap. We also observe an off-axis tangential microbubble motion that is due to the transfer of the beam's angular momentum flux. A simple elastic model for the hydrogel deformation combined with radiation force calculations finally provide local values of the medium's shear modulus, which are found to be in good agreement with standard bulk measurements performed with a rheometer. Our results suggest that acoustical tweezers are relevant tools to characterize the local mechanical properties of complex soft materials opening new opportunities in the field of active rheology.

2025-01-30T14:17:12Z Antoine Penneron Thomas Brunet Diego Baresch 10.1063/5.0254580 http://arxiv.org/abs/2501.17503v1 2025-01-29T09:18:31Z

We consider the initial value problem for a nonlinear shallow water model in horizontal dimension d = 2 and in the presence of a fixed partially immersed solid body on the water surface. We assume that the bottom of the solid body is the graph of a smooth function and part of it is in contact with the water. As a result, we have a contact line where the solid body, the water, and the air meet. In our setting of the problem, the projection of the contact line on the horizontal plane moves freely due to the motion of the water surface even if the solid body is fixed. This wave-structure interaction problem reduces to an initial boundary value problem for the nonlinear shallow water equations in an exterior domain with a free boundary, which is the projection of the contact line. The objective of this paper is to derive a priori energy estimates locally in time for solutions at the quasilinear regularity threshold under assumptions that the initial flow is irrotational and subcritical and that the initial water surface is transversal to the bottom of the solid body at the contact line. The key ingredients of the proof are the weak dissipativity of the system, the introduction of second order Alinhac good unknowns associated with a regularizing diffeomorphism, and a new type of hidden boundary regularity for the nonlinear shallow water equations. This last point is crucial to control the regularity of the contact line; it is obtained by combining the use of the characteristic fields related to the eigenvalues of the boundary matrix together with Rellich type identities.

2025-01-29T09:18:31Z Tatsuo Iguchi Keio University David Lannes IMB http://arxiv.org/abs/2403.20042v2 2025-01-28T01:48:33Z

This paper considers the problem of surface waves in an isotropic elastic half-space endowed with impedance boundary conditions as first proposed by Godoy et al. [Wave Motion 49 (2012), 585-594]. These conditions are controlled by two impedance parameters, where the standard stress-free boundary condition is retrieved for zero impedance. While the existence of a unique surface wave (called Rayleigh wave) is well-established for the standard stress-free boundary condition, the introduction of more general boundary conditions may lead to the absence of surface waves or even cause the PDE boundary value problem to become ill-posed. For the case of Godoy's impedance boundary conditions, the problem of existence and uniqueness of a surface wave of Rayleigh type was investigated by means of the complex function method based on Cauchy-type integrals. However, this method is quite cumbersome and hard to apply. In this work, we present an alternative method based on elementary tools from calculus to deal with the problem. We consider a particular case where both impedance parameters are non-zero and demonstrate the existence and uniqueness of the surface wave for all material and boundary parameter values. Numerical examples are presented to illustrate the effect of the impedance parameter on the speed of the surface wave.

2024-03-29T08:28:13Z Fabio Vallejo http://arxiv.org/abs/2501.16001v1 2025-01-27T12:37:56Z

Established techniques for characterizing a layer on a substrate system via surface acoustic wave (SAW) dispersion measurement are often slow due to the need for scanning excitation or detection positions. We present a method for determining discrete points on the SAW mode at equidistant wavenumbers that requires only a single measurement, overcoming these speed limitations. A pulsed laser, shaped into an array of equidistant lines, generates elastic waves on the sample surface. A vibrometer detects the resulting surface displacement next to the line array. The periodic excitation arrangement results in constructive interference of the SAW at wavelengths corresponding to integer fractions of the line spacing. This leads to distinct peaks in the response spectrum, whose higher orders we term spatial harmonics of the SAW. The known line spacing determines the wavelengths, allowing the peak frequencies to be mapped to discrete points on the SAW dispersion curve, effectively sampling the SAW at specific equidistant wavenumbers. By solving an inverse problem, a model can be fit to the experimental data to obtain properties of the layered system. We demonstrate this technique on copper-clad epoxy laminate and roll-cladded aluminum alloy plates and compare our results with dispersion relation scans and micrography. Additionally, we analyze the method's sensitivity to elastic parameters and layer thickness. This approach offers a viable alternative to established SAW scanning methods, particularly in scenarios where the trade-off of lower wavenumber sampling density is acceptable to achieve exceptionally fast measurements while avoiding moving parts.

2025-01-27T12:37:56Z submitted to Applied Physics Letters Rev. Sci. Instrum. 96, 074903 (2025) Georg Watzl Stefan Eder Martin Ryzy Mike Hettich Edgar Scherleitner Martin Schagerl Clemens Grünsteidl 10.1063/5.0260287 http://arxiv.org/abs/2501.18622v1 2025-01-26T20:24:02Z

We analyze the motion of a particle in the gravity field along a family of differentiable curves taking into account the Coulomb friction forces. A parametric equation of the optimal curves is given that generalizes the cycloid one in this case. The results of numerical calculations in the Mathcad program show that the found curve minimize the descent time for a given friction coefficient and can claim to be a brachistochrone with Coulomb friction.

2025-01-26T20:24:02Z 18 pages, 7 figures Alexander Kurilin http://arxiv.org/abs/2502.20401v1 2025-01-24T12:32:06Z

Wave motion is fundamentally constrained by the dispersion properties of the medium, often making it challenging -- or even impossible -- to guide wave packets along desired trajectories, particularly when wave inversion is required. The paper illustrates how one-dimensional (1D) and two-dimensional (2D) non-Hermitian elastic lattices with time-varying non-local feedback interactions offer unprecedented wave guidance. By relaxing the constraint of Hermiticity while preserving $\mathcal{PT}$-symmetry of the nonlocal interactions, it is herein built a framework where the dispersion transitions from positive to negative group velocity, passing through an intermediate regime characterized by a perfectly flat band across all momenta. This effect, realized within the unbroken $\mathcal{PT}$-symmetric phase, is further enhanced by the time modulation of lattice parameters, thereby unlocking functionalities such as perfect trapping, where a wave packet is intentionally stopped, and the wave boomerang effect, where the wave packet is reversed or guided back to its initial position. The framework presented in this paper unlocks opportunities that extend beyond wave guidance, including information processing through dispersion engineering in elastic media.

2025-01-24T12:32:06Z Emanuele Riva 10.1016/j.eml.2025.102383 http://arxiv.org/abs/2501.13494v1 2025-01-23T09:16:26Z

Many papers have been published over the years that either conjecture or even (claim to) prove the universality of the form of Maxwell's equations. We present yet another derivation of Maxwell's equations and discuss the conclusions suggested by Maxwell universality, namely the logical inevitability of the Lorentz transformations and the mathematical inconsistency of Newtonian physics.

2025-01-23T09:16:26Z C. Baumgarten http://arxiv.org/abs/2501.18609v1 2025-01-22T11:02:12Z

The electric current as the flux of current density -- a signed scalar, not a vector -- is inconsistent with the concept of the current direction, commonly invoked in the electric circuit analyses within, for example, Kirchhoff's current law, the resistance rule, and Lenz's law. This paper presents an approach to the circuit analysis that is not predicated upon the ``current direction,'' and thus avoids such inconsistencies. The approach is summarized in five rules and the application of these rules is demonstrated by analyzing an RLC series circuit.

2025-01-22T11:02:12Z 7 pages, 8 figures Tomaž Podobnik University of Ljubljana, Faculty of Mathematics and Physics, and Jožef Stefan Institute, Ljubljana http://arxiv.org/abs/2501.12028v1 2025-01-21T10:37:41Z

Capacitors are ubiquitous in electronic and electrical devices. In this article, we study -- both theoretically and experimentally -- the charging and discharging of capacitors using active control of a voltage source. The energy of these processes is analyzed in terms of work and heat. We show how to approach the quasistatic regime by slowing down the charging or discharging processes. Conversely, we study the price to be paid in terms of Joule heat when we speed up these processes. Finally, we develop optimal processes that minimize energy consumption for a finite charging time. Our work combines fundamental concepts from thermodynamics, classical mechanics and electrical circuits, thus blurring the artificial frontiers at the undergraduate level between these disciplines. Also, it provides a simple example of a prominent problem in current science, the optimization of energy resources. Moreover, our study lends itself well to an experimental project in the classroom, involving computer control of a voltage source, data acquisition, and processing.

2025-01-21T10:37:41Z 9 pages, 5 figures, accepted for publication in American Journal of Physics Am. J. Phys. 93, 328-335 (2025) S. Faure C. A. Plata A. Prados D. Guéry-Odelin 10.1119/5.0217194 http://arxiv.org/abs/2408.15773v2 2025-01-20T18:26:33Z

After Helmholtz, the mechanical foundation of thermodynamics included the First Law $d E = δQ + δW$, and the first part of the Clausius heat theorem $δQ^\text{rev}/T = dS$. The resulting invariance of the entropy $S$ for quasistatic changes in thermally isolated systems invites a connection with Noether's theorem (only established later). In this quest, we continue an idea, first brought up by Wald in black hole thermodynamics and by Sasa $\textit{et al.}$ in various contexts. We follow both Lagrangian and Hamiltonian frameworks, and emphasize the role of Killing equations for deriving a First Law for thermodynamically consistent trajectories, to end up with an expression of ``heat over temperature'' as an exact differential of a Noether charge.

2024-08-28T13:12:09Z 28 pages Math. Mech. Compl. Sys. 13 (2025) 1-24 Aaron Beyen Christian Maes 10.2140/memocs.2025.13.1 http://arxiv.org/abs/2501.11227v1 2025-01-20T02:27:11Z

This paper establishes a lower bound for the energy decay rate in piezoelectric cylinders. The bound incorporates material properties and geometric factors, including the cross-section's Poincaré-Wirtinger and Korn constants. A detailed analysis of a circular cross-section cylinder yields a precise numerical lower bound, illustrating the practical application of this result.

2025-01-20T02:27:11Z 16 pages Khanh Chau Le