https://arxiv.org/api/sWCggD+t+OLIlItv0kTErN0QYrM 2026-06-14T15:48:45Z 9441 720 15 http://arxiv.org/abs/2503.14544v1 2025-03-17T17:18:13Z

The Westervelt equation describes the propagation of pressure waves in continuous nonlinear and, eventually, diffusive media. The classical framework of this equation corresponds to fluid dynamics theory. This work seeks to connect this equation with the theory of deformations, considering the propagation of mechanical waves in nonlinear and loss-energy media. A deep understanding of pressure wave propagation beyond fluid dynamics it is required to be applied to medical diagnosis and therapeutic treatment. A deduction of a nonlinear partial differential equation for pressure waves is performed from first principles of deformation theory. The nonlinear propagation of pressure waves in tissue produces high-frequency components that are absorbed differently by the tissue, thus, distinguishing each of these modes is essential. An extension of the Westervelt equation beyond fluids media is required. In order to include the behaviour of any order harmonics, a generalization of this equation is also developed.

2025-03-17T17:18:13Z Mariano Caruso Guillermo Rus Juan Melchor http://arxiv.org/abs/2503.11626v1 2025-03-14T17:45:33Z

The discrete rotational symmetry of crystals leads to the conservation of quantized angular momentum in solids. While the exchange of energy and linear momentum between lattice vibrations (phonons) via anharmonic coupling is a cornerstone of solid-state physics, conservation and transfer of angular momentum within the lattice remains a postulate. Recently, phonon angular momentum, often in the form of chiral phonons, has been linked to giant magnetic fields, thermal Hall conductivity, dynamical multiferroicity, ultrafast demagnetization, or magnetic switching. However, the inherent process of phonon to phonon angular momentum transfer, fundamentally required to reach any magnetization equilibrium and imperative for all spin relaxation phenomena in solids, remains elusive. Here, we demonstrate the coherent transfer of angular momentum from one lattice mode to another by establishing helical nonlinear phononics. We directly observe rotational phonon-phonon Umklapp scattering dictated by pseudo angular momentum conservation and the threefold rotational symmetry of the topological insulator bismuth selenide. We identify nonlinear phonon-phonon coupling as an angular momentum transfer channel, confirmed by our ab-initio calculations. Besides bearing universal implications for angular momentum dissipation abundant in nature, our work actively reverses the natural flow, leading to the nonlinear upconversion of lattice angular momentum. We thus open the field of helical and chiral nonlinear phononics, representing a selective handle for ultrafast control of spins, topology and chiral quasi-particles.

2025-03-14T17:45:33Z 37 pages , 14 figures Olga Minakova Carolina Paiva Maximilian Frenzel Michael S. Spencer Joanna M. Urban Christoph Ringkamp Martin Wolf Gregor Mussler Dominik M. Juraschek Sebastian F. Maehrlein http://arxiv.org/abs/2503.10300v1 2025-03-13T12:22:28Z

We derive a new approach to analyze the coupling of linear Boussinesq and Saint-Venant shallow water wave equations in the case where the interface remains at a constant position in space. We propose a one-way coupling model as a reference, which allows us to obtain an analytical solution, prove the well-posedness of the original coupled model and compute what we call the coupling error-a quantity that depends solely on the choice of transmission conditions at the interface. We prove that this coupling error is asymptotically small for a certain class of data and discuss its role as a proxy for the full error with respect to the 3D water wave problem. Additionally, we highlight that this error can be easily computed in other scenarios. We show that the coupling error consists of reflected waves and argue that this explains some previously unexplained spurious oscillations reported in the literature. Finally, we prove the well-posedness of the half-line linear Boussinesq problem.

2025-03-13T12:22:28Z José Galaz CIGIDEN Maria Kazolea CARDAMOM Antoine Rousseau LEMON http://arxiv.org/abs/2502.19442v2 2025-03-12T19:25:51Z

The inner movement of a trebuchet with swinging counterweight was measured inside a laboratory by the use of rotation sensors to determine angular coordinates for beam, counterweight and sling. Data collection was started before the trebuchet was fired and lasted until some time after the projectile was released and flung into ground right in front of the machine. A single measurement is then sufficient for a semi-empirical determination of longest range and kinetic energy at target as well as mechanical energies and internal forces throughout the entire shot. Loss of mechanical energy was ascertained and attributed to friction. Measurements of actual ranges performed on a flat field with little wind are presented and compared with the semi-empirical determinations and ab initio calculations.

2025-02-24T10:36:48Z 22 pages, 19 figures, 4 tables, figure 15 on page 12 overlaps a line of text, small typographic corrections Erik Horsdal Filip Drejer Johansen Jonas Rasmussen http://arxiv.org/abs/2410.02594v2 2025-03-12T09:08:28Z

The asymmetric transformation elasticity offers a promising method to control elastic waves. However, this method requires elastic materials that support asymmetric stresses, which is not objective within the Cauchy elasticity framework. Nevertheless, asymmetric stress tensor is a typical feature of micropolar continuum theory. Yet, possible connection between micropolar continuum theory and the asymmetric elasticity transformation has remained elusive. Here, we demonstrate that extremal micropolar media, which refer to micropolar media with easy deformation modes, can be used to design elastic cloaks following the asymmetric transformation method. A metamaterial model is proposed to achieve the required extremal micropolar parameters for cloaking. We further design a two-dimensional metamaterial cloak and verify its cloaking performance numerically. An excellent agreement between the metamaterial cloak simulation and an effective-medium calculation is obtained. This study unveils a novel strategy for controlling elastic waves through micropolar media and also sheds light on interesting properties of extremal micropolar materials.

2024-10-03T15:36:02Z 22 pages, 7 figures Int. J. Mech. Sci. 309(111006), 2025 Dingxin Sun Yi Chen Xiaoning Liu Gengkai Hu 10.1016/j.ijmecsci.2025.111006 http://arxiv.org/abs/2403.03363v6 2025-03-11T14:36:57Z

We prove that, given an average power, the ascent time is minimized if a cyclist maintains a constant ground speed regardless of the slope. Herein, minimizing the time is equivalent to maximizing -- for a given uphill -- the corresponding mean ascent velocity (VAM: velocità ascensionale media), which is a common training metric. We illustrate the proof with numerical examples, and show that, in general, maintaining a constant instantaneous power results in longer ascent times; both strategies result in the same time if the slope is constant. To remain within the athlete's capacity, we examine the effect of complementing the average-power constraint with a maximum-power constraint. Even with this additional constraint, the ascent time is the shortest with a modified constant-speed -- not constant-power -- strategy; as expected, both strategies result in the same time if the maximum and average powers are equal to one another. Given standard available information -- including level of fitness, quantified by the power output, and ascent profile -- our results allow to formulate reliable and convenient strategies of uphill timetrials.

2024-03-05T23:16:42Z Len Bos Michael A. Slawinski Raphaël A. Slawinski Theodore Stanoev http://arxiv.org/abs/2503.07965v1 2025-03-11T01:42:46Z

A primary technical challenge for harnessing fusion energy is to control and extract energy from a non-thermal distribution of charged particles. The fact that phase space evolves by symplectomorphisms fundamentally limits how a distribution may be manipulated. While the constraint of phase-space volume preservation is well understood, other constraints remain to be fully appreciated. To better understand these constraints, we study the problem of extracting energy from a distribution of particles using area-preserving and symplectic linear maps. When a quadratic potential is imposed, we find that the maximal extractable energy can be computed as trace minimization problems. We solve these problems and show that the extractable energy under linear symplectomorphisms may be much smaller than the extractable energy under special linear maps. The method introduced in the present study enables an energy-based proof of the linear Gromov non-squeezing theorem.

2025-03-11T01:42:46Z 19 pages, 2 figures Michael Updike Nicholas Bohlsen Hong Qin Nathaniel Fisch http://arxiv.org/abs/2503.07362v1 2025-03-10T14:18:24Z

We construct the equation of Duffing oscillator in a dissipative medium using certain concepts from elementary mechanics. The Duffing equation (DE) without damping can be solved analytically. This is not true for a DE that involves a damping term. We remove the damping term from a linearly damped DE and thus obtain a simple analytical solution x(t) of the damped Duffing equation in the weak damping limit. The constructed solution allows us to examine the effect of damping on the phase path of the oscillator. The phase path is a parametric plot of x(t) and x = dxdt on the plane (x, x). While the phase path of the un-damped Duffing oscillator is an isolated limit cycle, the corresponding phase path for the Duffing oscillator with damping is a distorted one. We confirm our observation on the effect of dissipation by numerical simulation. We point out that it is often of interest to study dissipative systems at the quantum level and construct Lagrangian representations for both un-damped and damped Duffing oscillators. These results are expected to play a role to quantize the systems. We make some additional comments in respect of this.

2025-03-10T14:18:24Z 15 PAGES, 7 FIGURES Amitava Choudhuri Madan Mohan Panja Benoy Talukdar http://arxiv.org/abs/2405.03385v2 2025-03-10T09:48:50Z

We present an algorithm that fully reverses the shoebox image source method (ISM), a popular and widely used room impulse response (RIR) simulator for cuboid rooms introduced by Allen and Berkley in 1979. More precisely, given a discrete multichannel RIR generated by the shoebox ISM for a microphone array of known geometry, the algorithm reliably recovers the 18 input parameters. These are the 3D source position, the 3 dimensions of the room, the 6-degrees-of-freedom room translation and orientation, and an absorption coefficient for each of the 6 room boundaries. The approach builds on a recently proposed gridless image source localization technique combined with new procedures for room axes recovery and first-order-reflection identification. Extensive simulated experiments reveal that near-exact recovery of all parameters is achieved for a 32-element, 8.4-cm-wide spherical microphone array and a sampling rate of 16~kHz using fully randomized input parameters within rooms of size 2X2X2 to 10X10X5 meters. Estimation errors decay towards zero when increasing the array size and sampling rate. The method is also shown to strongly outperform a known baseline, and its ability to extrapolate RIRs at new positions is demonstrated. Crucially, the approach is strictly limited to low-passed discrete RIRs simulated using the vanilla shoebox ISM. Nonetheless, it represents to our knowledge the first algorithmic demonstration that this difficult inverse problem is in-principle fully solvable over a wide range of configurations.

2024-05-06T11:43:49Z IEEE transactions on acoustics, speech, and signal processing, 2025, 33, pp.1022-1033 Tom Sprunck IRMA, MACARON Antoine Deleforge IRMA, MACARON Yannick Privat IECL, SPHINX, IUF Cédric Foy UMRAE, Cerema Direction Est 10.1109/TASLPRO.2025.3536841 http://arxiv.org/abs/2503.06910v1 2025-03-10T04:23:44Z

Hidden momentum is a puzzling phenomenon associated with magnetic dipoles and other extended relativistic systems. We point out that the origin of hidden momentum lies in the effective change of individual particle masses of a composite body, during which the total momentum of the system is not equal to the momentum of the center of mass. Defining the hidden momentum as the difference between the total momentum and the center-of-mass momentum, we explain in detail how hidden momentum arises in certain simple non-relativistic systems, in typical relativistic systems due to velocity-dependent ``relativistic mass'', and in magnetic dipoles as a special case of relativistic systems.

2025-03-10T04:23:44Z 7 pages, one figure Bruno Klajn Hrvoje Nikolić http://arxiv.org/abs/2503.04206v1 2025-03-06T08:31:21Z

The refraction of light by dispersion-free dielectric media can be modeled using well-localized macroscopic wave packets, enabling a description in terms of pseudo-particles. This approach is often used in thought experiments to illustrate aspects of the Abraham-Minkowski debate. This work uses the particle picture to show at an elementary level how different types of momenta come into play, and how light refraction can be explained at the level of particles. A special exactly solvable microscopic model is used to illustrate the interplay and tension between microscopic physics and the conventional effective-medium Maxwell equations.

2025-03-06T08:31:21Z 3 figures R. Dengler http://arxiv.org/abs/2503.03906v1 2025-03-05T21:13:03Z

Squash is a widely popular racket sport, practiced by millions of people worldwide, played inside a walled court. When played well, players can last for several minutes before the ball bounces twice on the floor. There is, however, an unanswerable shot. When the ball hits the nick between a vertical wall and the floor, under certain conditions, it rolls without any vertical bounce. We study this process experimentally. We determined that the ball must hit the vertical wall first at a narrow range of heights above the floor, but most importantly, it must touch the floor before finishing its rolling time on the vertical wall. When the rolling time is shorter than the contact time, the vertical momentum is canceled due to a mechanical frustration condition. This behavior is explained considering a contact model, which agrees with the experimental observations. We argue that this concept could be relevant to the design of rolling shock dampers with many possible practical applications.

2025-03-05T21:13:03Z 10 pages, 2 figures Mithun Ravisankar Madeline Federle Mina Bahadori Asimanshu Das Haneesh Kesari Roberto Zenit http://arxiv.org/abs/2503.13481v1 2025-03-05T17:32:17Z

In this paper, we present an on-chip antenna at 290 GHz that achieves a maximum efficiency of 42\% on a low-resistivity silicon substrate for sub-terahertz integrated transceivers. The proposed antenna is based on a dual-slot structure to accommodate a limited ground plane and maintain desired radiation and impedance characteristics across the target frequency range. The antenna impedance bandwidth reaches 39\% with compact physical dimensions of 0.24$λ_0\times$0.42$λ_0$. Simulation and measurement results confirm its promising antenna performance for potential transceiver and radar applications.

2025-03-05T17:32:17Z Accepted by the 2025 IEEE International Symposium on Antennas & Propagation (AP-S) 2025 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting (AP-S/CNC-USNC-URSI) Boxun Yan Runzhou Chen Mau-Chung Frank Chang 10.1109/AP-S/CNC-USNC-URSI55537.2025.11266865 http://arxiv.org/abs/2503.03768v1 2025-03-03T16:24:23Z

We formulate the dispersion equation for H modes of a circular waveguide with a perfectly conducting strip of zero thickness placed symmetrically in its diametral plane. The wave number of the lowest mode is calculated with high accuracy for various strip widths. Simple asymptotic formulas are derived for the two extreme cases in which the width of the strip is either small or nearly equal to the diameter of the waveguide.

2025-03-03T16:24:23Z 8 pages, 2 pages, 2 tables Lithuanian Physics Journal, February 1989, vol. 29, no. 1, pp. 21-26 I. M. Braver Kh. L. Garb P. Sh. Friedberg http://arxiv.org/abs/2503.01473v1 2025-03-03T12:29:11Z

This article presents an alternative approach to finite elements for modeling and analyzing 3D static mooring lines using string theory and the shooting method (SM) to solve two-point boundary value problems (TPBVPs) for 3D nonlinear static string equations with various boundary condition (BC) types relevant to offshore slender system assemblies.The two-point boundary value problem for nonlinear extensible elastic strings was formulated by incorporating arbitrary 3D external distributed loads that are not restricted to gravity alone. The TPBVP was reformulated based on the formalism of the shooting method. A multi-body/multi-shooting approach is proposed to handle multi-material segments and line assemblies. A formulation of the boundary conditions that allows the modeling of Dirichlet, Robin, and mixed boundary conditions representing the displacement, force, and combined force/displacement constraints is presented.Four validation cases are presented, comparing the results to analytical solutions: (1) a single catenary segment with ball-prismatic joint boundary conditions under several imposed forces, (2) a review of all possible boundary conditions for strings, including spring-based BCs, (3) the Velaria problem with nonlinear radial distributed load, and (4) a three-segment hanging configuration with different material properties connected by a buoy.The results demonstrate an accuracy under 10-9 in terms of absolute errors for both positions and tensions along the entire length of the mooring lines. The proposed method also provides error control through adaptive step integration. It demonstrates high accuracy in modeling complex 3D kinematics and configurations for mooring lines, while limiting the iterative problem size.The proposed method provides an efficient alternative to discretization-based techniques for analyzing static configurations of string kinematics slender systems with various end constraints, such as mooring lines and hawsers assemblies in offshore engineering, while maintaining simplicity in approach and implementation.

2025-03-03T12:29:11Z Ocean Engineering, In press Florian Surmont Nantes univ - UFR ST