https://arxiv.org/api/0sICXG9TDmCjcF4Ph20LI3AtVvM 2026-06-14T14:45:15Z 9441 705 15 http://arxiv.org/abs/2503.22416v1 2025-03-28T13:30:53Z

Thought experiments like Maxwell's Demon or the Feynman-Smoluchowski Ratchet can help in pursuing the microscopic origin of the Second Law of Thermodynamics. Here we present a more sophisticated physical system than a ratchet, consisting of a Hamiltonian active particle which can harvest energy from an environment which may be in thermal equilibrium at a single temperature. We show that while a phenomenological description would seem to allow the system to operate as a Perpetual Motion Machine of the Second Kind, a full mechanical analysis confirms that this is impossible, and that perpetual energy harvesting can only occur if the environment has an energetic population inversion similar to a lasing medium.

2025-03-28T13:30:53Z 9 pages, 3 figures Simon Bienewald Diego Marcel Fieguth James R. Anglin 10.3390/e27090918 http://arxiv.org/abs/2503.22307v1 2025-03-28T10:27:59Z

During the wear process of surfaces in sliding friction, there is a running-in period during which the topography of surfaces changes with time before reaching the steady wear regime. In the steady wear regime, the statistical parameters used to describe the topography of the surfaces remain almost constant. Some experimental studies have shown that starting friction tests with different surface finish levels leads to the same final topography of surfaces in the regime of steady wear. This article proposes an analytical model to describe the evolution of the topography of surfaces during sliding wear. First of all, the Greenwood and Williamson approach is used to describe the contact between nominally flat rough surfaces. The asperities in contact may undergo plastic deformation or adhesion with the opposing surface. Using a plasticity criterion and an adhesion criterion, it is possible to obtain a differential equation for the evolution of the standard deviation of the asperities of the surfaces. This equation has an analytical solution that is in good agreement with experimental results from the literature. It is shown that the final surface topography is the result of the competition between abrasive wear and adhesive wear. The model is then used to describe different wear processes from polishing to galling.

2025-03-28T10:27:59Z Journal of Tribology, 2025, 147 (11) Noël Brunetière TriboLub 10.1115/1.4068176 http://arxiv.org/abs/2411.18185v4 2025-03-27T10:25:44Z

Localized nonlinear losses are taken into account in a simple Raman clarinet model.The complete system is expressed as an iterated map, enabling to study the stability of the different playing regimes. A parametric study is carried out with respect to three major parameters: blowing pressure, embouchure and nonlinear losses coefficient.The model exhibits the well-known effect of reducing the maximum blowing pressure until the oscillations stop (extinction threshold) when nonlinear losses increase.Furthermore, the stability analysis also shows that increasing nonlinear losses increases the minimal blowing pressure for which the oscillations start (oscillation threshold).

2024-11-27T10:06:18Z Nathan Szwarcberg LMA Christophe Vergez LMA Tom Colinot Michaël Jousserand http://arxiv.org/abs/physics/0412070v3 2025-03-25T21:31:35Z

We discuss the applications of Gauge Theory of Gravity (GTG) within the language of geometric algebra to black holes and Hawking radiation. Applications include the Unruh effect, the Dirac and Klein-Gordon equations in several backgrounds, such as the de Sitter and Rindler metrics as well as spherically and axially black hole backgrounds. The analysis is also generalised to allow the presence of magnetic monopoles. We rederive the Hawking temperature for all cases. The derivation of both the correct Fermi-Dirac and Bose-Einstein statistics as well as the Hawking temperature may suggest that the method of calculations we employ here - geometric algebra - is really powerful in dealing with the problems in various strong gravitational backgrounds.

2004-12-13T12:29:33Z Some mistakes; contents inaccurate S. Setiawan University of Edinburgh http://arxiv.org/abs/2503.19972v1 2025-03-25T18:00:03Z

The quadrupole Kozai mechanism, which describes the hierarchical three-body problem in the leading order, is shown to be equivalent to a simple pendulum where the change in the eccentricity squared equals the height of the pendulum from its lowest point: $e_{\text{max}}^2-e^2=h=l\left(1-\cosθ\right)$. In particular, this results in useful expressions for the KLC period, and the maximal and minimal eccentricities in terms of orbital constants. We derive the equivalence using the vector coordinates $\boldsymbolα=\textbf{j}+\textbf{e}, \boldsymbolβ=\textbf{j}-\textbf{e}$ for the inner Keplerian orbit, where $\textbf{j}$ is the normalized specific angular momentum, and $\textbf{e}$ is the eccentricity vector. The equations of motion for $\boldsymbolα$ and $\boldsymbolβ$ simplify to $\dot{\boldsymbolα}=2\partial_{\boldsymbolα} φ\times \boldsymbolα$ and $\dot{\boldsymbolβ}=2\partial_{\boldsymbolβ} φ\times \boldsymbolβ$, where $φ$ is the normalized averaged interaction potential and are symmetric to replacing $\boldsymbolα$ and $\boldsymbolβ$ for the KLC quadratic potential. Their constraints simplify to $\boldsymbolα^2=\boldsymbolβ^2=1$, and they are distributed uniformly and independently on the unit sphere for a uniform distribution in phase space (with a fixed energy).

2025-03-25T18:00:03Z 4 Pages, 2 Figures Roi D. Basha Ygal Y. Klein Boaz Katz http://arxiv.org/abs/2503.19384v1 2025-03-25T06:29:29Z

Information geometry is based on classical Legendre duality but allows to incorporate additional structure such as algebraic constraints and Bregman divergence functions. It is naturally suited, and has been successfully used, to describe the thermodynamics of chemical reaction networks (CRNs) based on the Legendre duality between concentration and potential spaces, where algebraic constraints are enforced by the stoichiometry. In this article, the Riemannian geometrical aspects of the theory are explored. It is shown that duality between concentration and potential spaces and the natural parametrizations of equilibrium subspace are isometries, which leads to a multivariate Cramer-Rao bound through the comparison of two Riemannian metric tensors. In the subsequent part, the theory is applied to the recently introduced concept of absolute sensitivity. Using the Riemannian geometric tools, it is proven that the absolute sensitivity is a projection operator onto the tangent bundle of the equilibrium manifold. A linear algebraic characterization and explicit results on first order corrections to the thermodynamics of ideal solutions are provided. Finally, the theory is applied to the IDHKP-IDH glyoxylate bypass regulation system. The novelty of the theory is that it is applicable to CRNs with non-ideal thermodynamical behavior, which are prevalent in highly crowded cellular environments due to various interactions between the chemicals. Indeed, the analyzed example shows remarkable behavior ranging from hypersensitivity to negative-self regulations. These are effects which usually require strongly nonlinear reaction kinetics. However, here, they are obtained by tuning thermodynamical interactions providing a complementary, and physically well-founded, viewpoint on such phenomena.

2025-03-25T06:29:29Z 35 pages, 1 figure Dimitri Loutchko Yuki Sughiyama Tetsuya J. Kobayashi http://arxiv.org/abs/2501.05044v2 2025-03-24T14:44:59Z

Two classes of non-linear elastic materials are derived via two-dimensional homogenization. These materials are equivalent to a periodic grid of axially-deformable and axially-preloaded structural elements, subject to incremental deformations that involve bending, shear, and normal forces. The unit cell of one class is characterized by elements where deformations are lumped within a finite-degrees-of-freedom framework. In contrast, the other class involves smeared deformation, modelled as flexurally deformable rods with sufficiently high axial compliance. Under increasing compressive load, the elasticity tensor of the equivalent material loses positive definiteness and subsequently undergoes an ellipticity loss. Remarkably, in certain conditions, this loss of stability is followed by a subsequent restabilization; that is, the material re-enters the elliptic regime and even the positive definiteness domain and simultaneously, the underlying elastic lattice returns to a stable state. This effect is closely related to the axial compliance of the elements. Our results: (i.) demonstrate new possibilities for exploiting structural elements within the elastic range, characterized by a finite number of degrees of freedom, to create architected materials with tuneable instabilities, (ii.) introduce reconfigurable materials characterized by 'islands' of stability or instability.

2025-01-09T08:10:21Z 31 pages, 13 figures Davide Bigoni Andrea Piccolroaz http://arxiv.org/abs/2504.03694v1 2025-03-24T08:53:27Z

The global trends in the construction of modern structures require the integration of sensors together with data recording and analysis modules so that their integrity can be continuously monitored for safe-life, economic and ecological reasons. This process of measuring and analyzing the data from a distributed sensor network all over a structural system in order to quantify its condition is known as structural health monitoring (SHM). Guided ultrasonic wave-based techniques are increasingly being adapted and used in several SHM systems which benefit from built-in transduction, large inspection ranges, and high sensitivity to small flaws. Nonetheless, for the design of a trustworthy health monitoring system, a vast amount of information regarding the inherent physical characteristics of the sources and their propagation and interaction across the structure is crucial. Moreover, any SHM system which is expected to transition to field operation must take into account the influence of environmental and operational changes which cause modifications in the stiffness and damping of the structure and consequently modify its dynamic behaviour. On that account, special attention is paid in this paper to the development of an efficient SHM methodology where robust signal processing and pattern recognition techniques are integrated for the correct interpretation of complex ultrasonic waves within the context of damage detection and identification. The methodology is based on an acousto-ultrasonics technique where the discrete wavelet transform is evaluated for feature extraction and selection, linear principal component analysis for data-driven modelling and selforganizing maps for a two-level clustering under the principle of local density. At the end, the methodology is experimentally demonstrated and results show that all the damages were detectable and identifiable.

2025-03-24T08:53:27Z Smart Materials and Structures, 2016, 25 (5), pp.055034 M-A Torres-Arredondo LIPN Julián Sierra-Pérez LIPN Guénaël Cabanes LIPN 10.1088/0964-1726/25/5/055034 http://arxiv.org/abs/2503.18110v1 2025-03-23T15:30:05Z

This study is grounded in the concept of spatial symmetry, which allows two co-phase RF sources to jointly radiate harmonic electromagnetic (EM) waves, even in presence of electromagnetic couplings between them. The superposition law is directly applied to the two waves owing to their sources, including the EM coupling effects. Our research uncovers a conflict with energy conservation law at the following two levels: (1) the total radiative powers as defined by Poynting theorem, and (2) further, the input powers of the sources. To explore this phenomenon, we create a symmetric dipole model to examine the energy behaviors at the sources and the superposed waves, separately. Both of the results reveal that the energy-doubling phenomenon presents when the dipoles are placed in close proximity. As the distance between the two dipoles increases, it is found that the total radiative power fluctuates in a damped manner and ultimately converges to a value required by energy conservation law. The theoretical conclusion of energy doubling is validated by experimental observations, which show a 1.59-fold increase in power within a microwave anechoic chamber. By analyzing the interactions, i.e., the EM coupling, between the two sources, we characterize a complete phenomenon of energy non-conservation.

2025-03-23T15:30:05Z Bingli Jiao Chenbo Wang Zijian Zhou http://arxiv.org/abs/2503.16373v1 2025-03-20T17:35:31Z

Studies of iCVD kinetics often make assumptions about the iCVD vapor phase that have been challenging to validate experimentally. We address this gap by investigating heat transfer and mixing in the iCVD reactor using in-situ gas composition sensing. Our work allows practitioners of iCVD to estimate the degree of mixing and temperature profile in the vapor phase based on reactor dimensions and process variables such as chamber pressure. We begin by using dimensional analysis to simplify the parameter space governing heat transfer and mixing, identifying key dimensionless groups that capture the dominant physics. We find that the degree of mixing in the reactor is primarily determined by the Peclet number (Pe), and heat transfer is primarily determined by the Knudsen number (Kn). Multiphysics simulations of the iCVD reactor provide visualizations of non-ideal mixing and allow us to identify the critical Pe above which the well-mixed assumption may begin to break down. To verify that the well-mixed assumption applies to iCVD at low Pe, we measured the residence time distribution (RTD) for argon and isopropanol flowing at 1 sccm, finding a close match to the well-mixed model. We used a Pirani pressure gauge for composition sensing to measure the RTD. We demonstrate the Pirani gauge to be a precise gas composition sensor, which is more modular and less expensive than methods like in-situ infrared spectroscopy and mass spectrometry. We then address heat transfer by measuring thermal diffusion from the filament at a range of pressures in argon and isopropanol. We quantified the effects of non-ideal heat transfer at low pressures and identified a critical Kn, above which heat transfer is independent of pressure. Measurement of thermally driven pressure changes in batch mode enables us to define and model an "effective temperature" for the reactor, matching the thermal diffusion model.

2025-03-20T17:35:31Z Simon Shindler Rong Yang http://arxiv.org/abs/2503.16568v1 2025-03-20T08:40:53Z

Lecture notes for a one-semester master-level course on analytical mechanics and classical field theory, covering: 0 Mathematical Introduction, 1 Lagrangian Mechanics, 2 Application: Motion in Central Fields, 3 Hamiltonian Mechanics, 4 Application: Oscillations of Mechanical Systems, 5 Application: Relativistic Mechanics, 6 Geometry of Classical Mechanics, 7 Application: Dynamics of Rigid Bodies, 8 Lagrangian and Hamiltonian Mechanics of Continuous Systems, 9 Application: Elasticity of Solids, 10 Symmetries and Conservation Laws, 11 Application: Fluid Dynamics, 12 Application: Electrodynamics

2025-03-20T08:40:53Z 313 pages, 39 figures, uses Springer's svmono style Tomas Brauner http://arxiv.org/abs/2501.18166v2 2025-03-19T11:48:06Z

Symmetry based reduction is applied to the buckling of a circular von-Karman plate with Kirchhoff rod boundary, where a mismatch between the edge length and the perimeter of plate is treated as the bifurcation parameter. A nonlinear operator formulation describes the equilibrium of the elastic rod plate system. The critical points, as potential bifurcation points, are stated using the linearized operator. The symmetry of null space for each critical point is identified as a subgroup of the complete symmetry group of nonlinear problem, the equivariance associated with the nonlinear operator is used in this process. Sufficient evidence is provided for each critical point to be a bifurcation point for the symmetry reduced problem and post buckling analysis is carried out using Lyapunov Schmidt reduction. Bifurcation curves are obtained till quadratic order in bifurcation parameter away from each critical value. Theoretical results for bifurcation curves are validated against the numerical simulation based on a symmetry reduced finite element method for some illustrative examples of critical points. A numerical study is carried out for the dependence of the coefficient of quadratic term in the bifurcation parameter when structural parameters are varied in a neighborhood of four fixed sets of structural parameters. Numerical results based on a symmetry reduced finite element analysis confirm that the nonlinear solution agrees with the local theoretical behavior close to a critical point but deviates further away from it. Using these tools, two main conclusions are reached. First it is observed that the critical points of the linearized problem are indeed bifurcation points. Second, an alteration in the nature of bifurcation is observed during the parameter sweep study when the plate is in tension.

2025-01-30T06:29:41Z 28 pages, 5 figures Deepankar Das Basant Lal Sharma http://arxiv.org/abs/2503.15031v1 2025-03-19T09:23:38Z

In this tutorial, we provide the natural derivation of symmetrical, gauge-invariant canonical energy-momentum tensor for the abelian gauge field, i.e., the electromagnetic field.

2025-03-19T09:23:38Z Peir-Ru Wang Yen-Cheng Chang http://arxiv.org/abs/2405.17063v3 2025-03-18T16:44:56Z

Orthogonal coordinate systems enable expressing the boundary conditions of differential equations in accord with the physical boundaries of the problem. It can significantly simplify calculations. The orthogonal similar oblate spheroidal (SOS) coordinate system can be particularly useful for a physical processes description inside or in the vicinity of the bodies or particles with the geometry of an oblate spheroid. The interior solution of the Laplace equation in the SOS coordinates was recently found; however, the exterior solution was missing. The exterior solution of the azimuthally symmetric Laplace equation in the SOS coordinates is derived. In the steps leading to this solution, important formulas of the SOS algebra are found. Various forms of the Laplace operator in the SOS coordinates in azimuthally symmetric case are shown. General transformation between two different SOS coordinate systems is derived. It is determined that the SOS harmonics are physically the same as the solid harmonics. Further, a formula expressing any generalized Legendre polynomial as a finite sum of monomials is found. The reported relations have potential application in geophysics, astrophysics, electrostatics and solid state physics (e.g. ferroic inclusions).

2024-05-27T11:33:47Z Version printed in Contemporary Mathematics (Singapore). Licence: CC BY 4.0. 23 pages, 1 figure, 4 supplements Contemp. Math. 6 (2025), 1715-1737. https://ojs.wiserpub.com/index.php/CM/article/view/4965 Pavel Strunz 10.37256/cm.6220254965 http://arxiv.org/abs/2503.14155v1 2025-03-18T11:29:08Z

Dirac-like cones, featuring conical linear dispersions intersecting with flat bands, typically arise from accidental degeneracy of multiple modes that requires precise tuning of material and structural parameters, inherently limiting their robustness and applications. In this work, by introducing electromagnetic duality symmetry into photonic crystals, we demonstrate the emergence of intrinsically robust deterministic Dirac-like cones. We show that such symmetry (achieved through either self-dual particles or non-self-dual particle clusters with duality-glide symmetry) enforces double degeneracies for band structures of photonic crystals. Furthermore, by harnessing the joint duality-structural symmetry, multiple deterministic Dirac-like cones exhibiting exceptional resilience to lattice size variations can be obtained. Our introduction of an extra symmetry into photonic crystals establishes a profound connection between duality symmetry and Dirac physics, providing a robust platform for advanced photonic band engineering.

2025-03-18T11:29:08Z ACS Photonics 2025 Muxuan Yang Dongyang Yan Lei Gao Wei Liu Yun Lai Yadong Xu Zhi Hong Hang Jie Luo 10.1021/acsphotonics.5c00727