https://arxiv.org/api/RHOSb4RlPIhWMfBX3WpSAcgBYGc 2026-06-14T01:27:56Z 9441 510 15 http://arxiv.org/abs/2508.19285v1 2025-08-25T02:40:47Z

This project focuses on a method to extract a frequency comb in mechanical means, for general interest and numerous practical applications in MEMS. The method of execution is the implementation of a beam that is exhibiting non-linear dynamics that is perturbed and analyzed for its transverse vibrations. The perturbation is an external harmonic driver with a chosen small amplitude and frequency (which is slightly detuned from the beam eigenfrequency), that when engaged with the unperturbed beam oscillations, causes it reach a state of "injection pulling" - an effect that occurs when one harmonic oscillator is coupled with a second one and causes it to oscillate in a frequency near its own. This causes the beam to reach SNIC bifurcation, rendering a frequency comb as desired. Theoretical analysis showed that the problem can be modelled using a non-linear equation of the beam, that translates to a form of the non-linear Duffing equation. While a solution to the dynamics function of the beam is hard to obtain in practice due to mathematical difficulties, a slow evolution model is suggested that is composed of functions of a amplitude and phase. Using several additional mathematical assumptions, the amplitude is seen to be related to the phase, while the phase equation solution is seen to be of the form of Adler's equation. These assumptions ultimately reduce the entire behaviour of the beam to a relatively simple solution to the Adler equation, which has a known analytical solution. Computerized numerical simulations are run on it to check the results and compare them to the theory and desired outcome. The results agreed with the theory and produce the expected frequency comb, showing the assumptions to be valid in extracting the comb.

2025-08-25T02:40:47Z Presented at the 35th Israeli Conference on Mechanical Engineering (ICME 2018) Joshua Shay Kricheli 10.13140/RG.2.2.33666.58568/1 http://arxiv.org/abs/2503.23369v4 2025-08-24T15:27:27Z

Accurate finite element analysis of refined shell theories is crucial but often hindered by membrane and shear locking effects. While various element-based locking-free techniques exist, this work addresses the problem at the theoretical level by utilizing results from asymptotic analysis. A formulation of a 2D refined shell theory incorporating transverse shear is developed using rescaled coordinates and angles of rotation, ensuring equal asymptotic orders of magnitude for extension, bending, and rotation measures and their respective stiffnesses. This novel approach, implemented via isogeometric analysis, is shown to be both asymptotically accurate relative to the underlying refined shell theory and inherently free from membrane and shear locking. Numerical simulations of semi-cylindrical shells show excellent agreement between the analytical solutions, 2D refined shell theory predictions, and 3D elasticity theory, validating the effectiveness and accuracy of the proposed formulation.

2025-03-30T09:05:30Z 49 pages, 23 figures Khanh Chau Le Hoang-Giang Bui http://arxiv.org/abs/2403.14543v6 2025-08-22T16:01:39Z

It is known that the balance laws of hyperelasticity (Green elasticity), i.e., conservation of mass and balance of linear and angular momenta, can be derived using the first law of thermodynamics by postulating its invariance under superposed rigid body motions of the Euclidean ambient space -- the Green-Naghdi-Rivlin theorem. In the case of a non-Euclidean ambient space, covariance of the energy balance -- its invariance under arbitrary diffeomorphisms of the ambient space -- gives all the balance laws and the Doyle-Ericksen formula -- the Marsden-Hughes theorem. It is also known that, by assuming the balance laws, and positing the first and second laws of thermodynamics, the Doyle-Ericksen formula can be derived\textemdash the Coleman-Noll procedure. In this paper, we propose a generelization of the Coleman-Noll procedure: we show that the Doyle-Ericksen formula as well as the balance laws for both hyperelasticity and hyper-anelasticity can be derived using the first and second laws of thermodynamics without assuming any (observer) invariance.

2024-03-21T16:42:17Z Souhayl Sadik Arash Yavari http://arxiv.org/abs/2508.16704v1 2025-08-22T11:01:39Z

The stability analysis of elastic rings subjected to various loading conditions is examined, focusing on stable and unstable configurations. The harmonic balance method is employed to investigate the stability range under different loading conditions. This method provides improved accuracy in results and yields a smooth, stable range of values for all modes of symmetry. Additionally, the bifurcation analysis technique of linearization is utilized to identify unstable regions, and it demonstrates good agreement with the results obtained using the harmonic balance method.

2025-08-22T11:01:39Z 08 pages, 13 figures, 01 table Muhammad Sami Siddiqui http://arxiv.org/abs/2506.16220v3 2025-08-20T11:53:24Z

The Transfer Matrix Method is a practical approach for modeling plane wave propagation in one-dimensional waveguides. Its simplicity makes it especially attractive for accounting for viscothermal losses, enabling realistic simulations of complex waveguides such as wind instruments. Another strength of this method lies in its fully analytical formulation of wave propagation. Modal parameters naturally arise as by-products of the model, obtained by numerically solving analytical expressions. In this work, the analytical potential of the method is extended by deriving the sensitivity of modal parameters to changes in the geometry of the resonator. These analytical gradients are applied in the context of wind instrument design. A simplified model of a soprano saxophone is used to investigate how octave harmonicity can be optimized through small geometric adjustments. The proposed approach enables predictive adjustments of geometry and offers valuable insight for both sound synthesis and instrument making.

2025-06-19T11:24:23Z Acta Acustica Nathan Szwarcberg LMA Tom Colinot LMA Christophe Vergez LMA Michaël Jousserand http://arxiv.org/abs/2508.16649v1 2025-08-19T16:22:47Z

In a previous work we have described the classical structure and analyzed the interaction of the classical Dirac particle with uniform and oscillating electric and magnetic fields. In the present paper we consider the interaction of the Dirac particle at rest with an electromagnetic plane wave packet. The integration of the dynamical equations is done numerically with a Mathematica notebook that is available to the reader. Independently of the electric charge of the Dirac particle the interaction produces a linear momentum transfer such that the center of mass of the particle is moving with a component of its CM velocity in the direction of the propagation of the wave. The electromagnetic plane wave transfers energy, linear momentum and angular momentum to the particle. The CM spin is also modified and its change depends on the torque of the external Lorentz force defined at the center of charge position with respect to the center of mass and on the work of the external force along the center of mass trajectory of the particle. We analyze how the different physical parameters of the wave and the spin orientation determine the outcome of the numerical experiment.

2025-08-19T16:22:47Z 23 pages, 12 figures, 1 Mathematica notebook, 1 link to Wolfram Community Project Juan Barandiaran Martin Rivas http://arxiv.org/abs/2507.14862v4 2025-08-19T12:46:46Z

We introduce a minimal model consisting of a two-body system with stochastically broken reciprocity (i.e., random violation of Newton's third law) and then investigate its statistical behaviors, including fluctuations of velocity and position, time evolution of probability distribution functions, energy gain, and entropy production. The effective temperature of this two-body system immersed in a thermal bath is also derived. Furthermore, we heuristically present an extremely minimal model where the relative motion adheres to the same rules as in classical mechanics, while the effect of stochastically broken reciprocity only manifests in the fluctuating motion of the center of mass.

2025-07-20T08:10:57Z 9 pages, 2 figure, submitted to communications in theoretical physics Commun. Theor. Phys. 78 025601 (2026) Z. C. Tu 10.1088/1572-9494/ae0633 http://arxiv.org/abs/2508.12955v1 2025-08-18T14:30:55Z

A self-consistent semi-analytical theory of beam loading in inhomogeneous accelerating structures based on the generalized theory of coupled modes is proposed. A single-mode approximation was used when the fields are represented as a sum of two components, one of which is associated with the right travelling eigen wave, and the second with the left. However, this second component is not always a left travelling. When a field is excited by an electron beam it can have complex spatial distribution. The results of calculation of the distribution of electric fields excited by a relativistic electron beam are presented.

2025-08-18T14:30:55Z 16 pages, 32 figures M. I. Ayzatsky http://arxiv.org/abs/2506.11582v3 2025-08-18T10:12:40Z

The torsion loading of a coupled cylinder, comprising distinct upper and lower cylindrical sections potentially made of different materials, is considered. The bottom of the cylinder is fixed in place, and induces the cylinder vibration. The torsion is applied via an arbitrary loading on the upper face. Three forms of coupling condition between the upper and lower cylinders are outlined: ideal, soft (weak), and rigid (hard/ stiff) contact. The resulting displacements and tangential stresses are obtained using the finite Hankel transform, and a Green's function representation of the displacement. Numerical results are provided, and the impact of the differing coupling conditions investigated for a range of cylinder geometries, material properties and vibration rates. The resonance frequencies of the coupled cylinder are determined. A method for using the coupled cylinder model to approximate the displacement of a cylinder containing a damaged region via a weak interfacial layer is outlined. The properties of the weak interface layer needed for this approximation are determined, and the advantages of its use in non-destructive testing are discussed.

2025-06-13T08:42:58Z 36 pages, 6 figures, 3 tables Igor Istenes Daniel Peck Yuriy Protserov Natalya Vaysfeld Zinaida Zhuravlova http://arxiv.org/abs/2508.11735v1 2025-08-15T16:36:31Z

It is shown that a chain of closed systems of first order ordinary differential equations describing the evolution of moments can be constructed using the Jacobi equation. It is shown that Wronsky determinants for fundamental matrices of closed systems of first order ordinary differential equations are integrals of motion on extremals of the Euler-Lagrange equation.

2025-08-15T16:36:31Z V. P. Koshcheev http://arxiv.org/abs/2502.04410v3 2025-08-15T11:34:59Z

The Ucar effect is a simple yet astonishing phenomenon where a permanent magnet can be levitated by placing it in the vicinity of another permanent magnet that rotates sufficiently fast. The few previous works on this type of magnetic levitation all required magnets rotating on the order of 200 Hz. Here we investigate the influence of applying a static magnetic field on the rotation axis and show that this can lower the needed rotation frequency to below 50 Hz. We explain this by a detailed analysis of the force producing levitation, which is a superposition of a repelling force caused by the off-axis (rotating) magnetic field and an attractive force due to the on-axis field. We study this force and resulting levitation experimentally, analytically and numerically for three different rotor magnet configurations, showing that trends in the levitation distance and frequency range can be accurately predicted from both the numerical and analytical models.

2025-02-06T11:20:54Z 14 pages, 8 figures (including supplementary material) Applied Physics Letters 127, 012402 (2025) Joachim Marco Hermansen Frederik Laust Durhuus Rasmus Bjørk 10.1063/5.0267494 http://arxiv.org/abs/2508.06967v2 2025-08-13T00:51:02Z

Fast computational method for Hertzian contact theory is proposed. An incremental formula is introduced to calculate the ellipticity of the contact disk when two elastic bodies are in contact. This method can determine the ellipticity with good accuracy in a small number of iterations is reported. This method is also shown to be applicable from the case of a near perfect circle to the case where the major diameter is sufficiently long compared to the minor diameter.

2025-08-09T12:25:11Z 6 pages, 4 figures Shintaro Hokada Shunsuke Iizuka Satoshi Takada 10.1007/s11223-025-00833-x http://arxiv.org/abs/2506.04809v2 2025-08-12T17:28:34Z

A method is presented for the fast evaluation of the transient acoustic field generated outside a spherical surface using surface data on the sphere. The method employs Lebedev quadratures, which are optimal integration on the sphere, and Lagrange interpolation and differentiation in an advanced time algorithm for the evaluation of the transient field. Numerical testing demonstrates that the approach gives near machine-precision accuracy and a speed-up in evaluation time which depends on the order of quadrature rule employed but breaks even with direct evaluation at a number of field points about 1.15 times the number of surface quadrature nodes, making the method an efficient means of evaluating the field generated by a large number of sources.

2025-06-05T09:33:18Z Revision submitted to Journal of the Acoustical Society of America Michael J. Carley 10.1121/10.0039386 http://arxiv.org/abs/2504.20162v2 2025-08-12T12:21:52Z

Recently, a new general wave phenomenon, namely "the anti-localization of non-stationary linear waves", has been introduced and discussed (Shishkina et al., J. Sound. Vib. 553, 2023, 117673). This is zeroing of the propagating component for a non-stationary wave-field near a defect in infinitely long wave-guides. The phenomenon is known to be observed in both continuum and discrete mechanical systems with a defect, provided that the frequency spectrum for the corresponding homogeneous system possesses a stop-band. In this paper, we show that the anti-localization is also quite common for nonlinear systems. To demonstrate this, we numerically solve several non-stationary problems for an infinite strongly nonlinear $β$-FPUT chain with a defect. In our opinion, the anti-localization essentially influences the processes of heat transfer in linear and nonlinear lattices.

2025-04-28T18:03:13Z 12 pages, 12 figures Mechanics Research Communications 151 (2026) 104591 Serge N. Gavrilov Ekaterina V. Shishkina Bogdan S. Borisenkov 10.1016/j.mechrescom.2025.104591 http://arxiv.org/abs/2411.12381v4 2025-08-11T07:25:34Z

Acoustic microfluidic is an important technology in particle manipulations in biomedical analyses and detections. However, the particle-movement manipulations achieved by the standing surface acoustic wave is suitable for particles in a thin layer of fluids, however it is difficult to manipulate particles in deeper solutions due to the energy loss of surface acoustic waves. The traditional standing bulk wave method can realize the particle manipulation in deep solutions, but it cannot work properly for particle manipulation within a long distance due to the energy loss. In this work, the topological rainbow defect-state trapping is realized, the results show that an effect of point accumulation of acoustic pressure in the waveguide path exists, the position of maximum acoustic pressure can be adjusted flexibly by changing the frequency of the incident acoustic wave, based on which, long-distance movement and capture manipulations of particles in deep solution have been realized. The phenomenon presented in this work can provide a reliable method for manipulations of continuous long-distance particle movement and capture to meet the demand of multiple processing steps in biochemical analyses and detections. The experiment verification results will be presented in the near future.

2024-11-19T10:01:39Z Decai Wu Bowei Wu Tingfeng Ma Shuanghuizhi Li Iren Kuznetsova Ilya Nedospasov Boyue Su Teng Wang