https://arxiv.org/api/uNWApBKWvMKEhM3WxtUA6VHRkhU 2026-06-13T22:52:04Z 9441 480 15 http://arxiv.org/abs/2509.10525v2 2025-09-16T07:08:44Z

This paper examines the intuitive meaning of the Saint--Venant compatibility equation known from the linear theory of deformations. The linearized theory is typically obtained from the relations of finite deformation theory by neglecting higher-order terms. We show how to formulate the compatibility conditions for finite deformations and how the well-known equation for small deformations follows from this formulation.

2025-09-04T11:39:37Z 5 pages, 1 figure Balázs Pere http://arxiv.org/abs/2509.12601v1 2025-09-16T02:58:26Z

The recent discovery of compressed superconductivity at 80~K in La$_3$Ni$_2$O$_7$-$δ$ has brought nickelates into the family of unconventional high-temperature superconductors. However, due to the challenges of directly probing the superconducting pairing mechanism under high pressure, the pairing symmetry and gap structures of nickelate superconductors remain under intense debate. In this work, we successfully determine the microscopic information on the superconducting gap structure of La$_3$Ni$_2$O$_7$-$δ$ samples subjected to pressures exceeding 20~GPa, by constructing different conductance junctions within diamond anvil cells. By analyzing the temperature-dependent differential conductance spectra within the Blonder--Tinkham--Klapwijk (BTK) model, we have determined the superconducting energy gap at high pressure. The differential conductance curves reveal a two-gap structure with $Δ_{1} = 23~\mathrm{meV}$ and $Δ_{2} = 6~\mathrm{meV}$, while the BTK fitting is consistent with an $s$-like, two-gap spectrum. The gap ratio $2Δ_{s1}(0) / k_{\mathrm{B}}T_{c}$ is found to be 7.61, belonging to a family of strongly coupled superconductors. Our findings provide valuable insights into the superconducting gap structures of the pressure-induced superconducting nickelates.

2025-09-16T02:58:26Z 27 pages, 15 pages Jianning Guo Yuzhi Chen Yulong Wang Hualei Sun Deyuan Hu Meng Wang Xiaoli Huang Tian Cui http://arxiv.org/abs/2509.16231v1 2025-09-15T05:34:58Z

Non-equatorial space elevators are interesting as they give more freedom for anchor location, avoid the highly occupied geosynchronous orbit and the areas of highest radiation in the Van Allen belts. We review the static equation for a uniform-stress tether, and use it to study the tapering of a uniform-stress tether in a general potential field. We then focus on a rotating coulomb potential and study the range of latitudes that are allowed for a uniform-stress space elevator. Finally, we look at a few practical issues that are raised by non-equatorial space elevators.

2025-09-15T05:34:58Z This paper was first published in Proc. of the 3rd International Space Elevator Conference, June 2004, reprinted on arXiv by permission of Bradley Edwards former director at ISR Blaise Gassend http://arxiv.org/abs/2509.10428v1 2025-09-12T17:32:46Z

Neural mass models describe the mean-field dynamics of populations of neurons. In this work we illustrate how fundamental ideas of physics, such as energy and conserved quantities, can be explored for such models. We show that time-rescaling renders recent next-generation neural mass models Hamiltonian in the limit of a homogeneous population or strong coupling. The corresponding energy-like quantity provides considerable insight into the model dynamics even in the case of heterogeneity, and explain for example why orbits are near-ellipsoidal and predict spike amplitude during bursting dynamics. We illustrate how these energy considerations provide a possible link between neuronal population behavior and energy landscape theory, which has been used to analyze data from brain recordings. Our introduction of near-Hamiltonian descriptions of neuronal activity could permit the application of highly developed physics theory to get insight into brain behavior.

2025-09-12T17:32:46Z 11 pages, 6 figures, 1 page Supplementary text Daniele Andrean Morten Gram Pedersen http://arxiv.org/abs/2509.10042v1 2025-09-12T08:12:53Z

A theory of a new magnetodynamic effect describing the energy exchange between the degrees of freedom of a conducting cylinder moving in a helical magnetic field has been developed. The possibility of effectively converting the translational motion of the cylinder into its angular rotation around the system axis (translational-rotational conversion, TRC) has been demonstrated. A connection between this effect and the formation of helical trajectories of electrons in undulators in free electron lasers (FELs) and the inverse Faraday effect (IFE) has been revealed. In TRC, unlike many known effects associated with the interaction of a moving conductor with a magnetic field, the conductor has no electrical contact with any external circuit, which makes it especially attractive for various applications. The TRC is also possible in a magnetohydrodynamic flow moving along the axis of a helical magnetic field. The theory is formulated in the limit of large magnetic Reynolds numbers, which corresponds to a sufficiently fast motion of well-conducting objects. In this scenario, the dynamics of the system is described by a nonlinear pendulum equation or a nonlinear pendulum equation with a nonzero right-hand side. In the latter case, a system dynamic mode corresponding to phase lock can be implemented.

2025-09-12T08:12:53Z Submitted to Physical Review E (Regular Article). REVTeX 4.2 source; 8 pages, 4 figures M. D. Tokman V. L. Bratman E. Magori N. Balal http://arxiv.org/abs/2507.18782v3 2025-09-10T22:15:29Z

Rubber friction is of major practical importance in applications such as tires, rubber seals, and footwear. This review article focuses on the theory and experimental studies of rubber friction on substrates with random roughness. We examine both steady sliding and accelerated motion, with particular attention to the origins of the breakloose friction force and the influence of pre-slip, elasticity, and flash temperature on friction dynamics. We further discuss rolling friction for cylinders and spheres, as well as sliding friction for triangular sliders on dry and lubricated rubber surfaces. Theoretical predictions are compared with experimental results obtained using different materials, geometries, and environmental conditions, highlighting the importance of accounting for multiscale roughness. Open challenges, such as the role of adhesion enhancement, energy dissipation due to crack opening, and the physical origin of the short-distance roughness cut-off, are discussed.

2025-07-24T20:08:29Z B. N. J. Persson R. Xu http://arxiv.org/abs/2509.08394v1 2025-09-10T08:38:30Z

The crucial role played by Wet Cooling Towers (WCT) in many electricity production plants (e.g. nuclear power plants) make them a key parameter in the industrial design of such facilities. Their impact over the cooling water consumption and surrounding atmosphere through the formation and dispersion of a humid air plume has pushed the need to obtain proper models and simulations in order to anticipate those effects. In this work, we tackle this issue through a dedicated modelling in the CFD solver code_saturne. Specific modeling includes heat and mass transfer (convection and evaporation) between the injected water and the air flow that are validated against experimental results obtained in a reduced scale WCT experimental loop. Satisfying agreement is obtained for several parameters such as air and water exit temperatures, evaporation mass flow rate and total exchanged thermal power. This constitutes an important first step for detailed CFD predictions of WCT water consumption and humid air plume atmospheric dispersion.

2025-09-10T08:38:30Z 11th International Conference on Heat Transfer and Fluid Flow, Aug 2024, Barcelona, Spain Luc Favre CEREA, ENPC Martin Ferrand CEREA, ENPC, EDF R and D MFEE http://arxiv.org/abs/2509.08297v1 2025-09-10T05:32:59Z

Electroactive polymers are smart materials that can be used as actuators, sensors, or energy harvesters. We focus on a pseudo trilayer based on PEDOT, a semiconductor polymer: the central part consists of two interpenetrating polymers and PEDOT is polymerized on each side; the whole blade is saturated with an ionic liquid. A pseudo trilayer is obtained, the two outer layers acting as electrodes. When an electric field is applied, the cations move towards the negative electrode, making it swell, while the volume decreases on the opposite side; this results in the bending of the strip. Conversely, the film deflection generates an electric potential difference between the electrodes. We model this system and establish its constitutive relations using the thermodynamics of irreversible processes; we obtain a Kelvin--Voigt stress--strain relation and generalized Fourier's and Darcy's laws. We validate our model in the static case: we apply the latter to a cantilever blade subject to a continuous potential electric difference at the constant temperature. We draw the profiles of the different quantities and evaluate the tip displacement and the blocking force. Our results agree with the experimental data published in the literature.

2025-09-10T05:32:59Z Smart Materials and Structures, 2024, 33 (9), pp.095030 Mireille Tixier LMV J Pouget DALEMBERT http://arxiv.org/abs/2509.06394v1 2025-09-08T07:27:49Z

Non-destructive evaluation (NDE) of rail tracks is crucial to ensure the safety and reliability of rail transportation systems. In this work, we present a quantitative study using various signal processing methods to identify defects in rail structures. A diffuse field configuration was employed at few dozens of kiloHertz, where the emitter and receiver were remotely located, and wave energy propagated via multiple reflections within the medium. A reference database is first constructed by acquiring measurements at different rail positions and different torque levels (up to 50 N.m). The defect is then identified by comparing its signature to those stacked in the database. First, the destretching technique, based on Coda Wave Interferometry (CWI), is applied to correct for temperature-induced velocity variations. Then, the identification is performed using the Mean Square Error (MSE) metric and Orthogonal Matching Pursuit (OMP) technique. A comparative analysis of the both methods is conducted, focusing on their robustness and performance.

2025-09-08T07:27:49Z Elissa Akiki TPIA - IEMN, IEMN Lynda Chehami TPIA - IEMN, IEMN Nikolay Smagin TPIA - IEMN, IEMN Emmanuel Moulin TPIA - IEMN, IEMN Jamal Assaad Youssef Zaatar http://arxiv.org/abs/2509.15231v1 2025-09-07T12:19:15Z

The connection between topology and quantum mechanics is one of the cornerstones of modern physics. Several examples of current interest like the Aharonov-Bohm effect in quantum mechanics, monopoles and instantons in quantum field theory, the quantum Hall effect in condensed matter physics, anyons in topological quantum computation, and the AdS-CFT correspondence in string theory illustrate this connection. Since classical mechanics is a limiting case of quantum mechanics, it behooves us to ask how topology impacts classical mechanics. Topological considerations do play an important role in the classical context too, for example in fluid vortices and atmospheric dynamics. With a desire to understand this connection more deeply, we study classical mechanics on finite spaces. Towards this end, we use the formalism developed by Bering and identify the corrections to the Klein-Gordon equation due to the presence of the boundary. We solve the modified equation in various dimensions under suitable assumptions of symmetry.

2025-09-07T12:19:15Z Kaustav Giri V. V. Sreedhar http://arxiv.org/abs/2509.05420v1 2025-09-06T14:08:32Z

The enormous energy demand of artificial intelligence is driving the development of alternative hardware for deep learning. Physical neural networks try to exploit physical systems to perform machine learning more efficiently. In particular, optical systems can calculate with light using negligible energy. While their computational capabilities were long limited by the linearity of optical materials, nonlinear computations have recently been demonstrated through modified input encoding. Despite this breakthrough, our inability to determine if physical neural networks can learn arbitrary relationships between data -- a key requirement for deep learning known as universality -- hinders further progress. Here we present a fundamental theorem that establishes a universality condition for physical neural networks. It provides a powerful mathematical criterion that imposes device constraints, detailing how inputs should be encoded in the tunable parameters of the physical system. Based on this result, we propose a scalable architecture using free-space optics that is provably universal and achieves high accuracy on image classification tasks. Further, by combining the theorem with temporal multiplexing, we present a route to potentially huge effective system sizes in highly practical but poorly scalable on-chip photonic devices. Our theorem and scaling methods apply beyond optical systems and inform the design of a wide class of universal, energy-efficient physical neural networks, justifying further efforts in their development.

2025-09-06T14:08:32Z Benjamin Savinson David J. Norris Siddhartha Mishra Samuel Lanthaler http://arxiv.org/abs/2509.02628v2 2025-09-06T09:09:55Z

We study one-dimensional elastic collisions of three point masses on a line under vacuum, with no triple collisions. We express momentum conservation in matrix form and analyze the composite map $D=D_{BC}D_{AB}$ and its powers $D^k$, which yield the velocities after any prescribed number of collisions for arbitrary mass ratios and initial data. After that, using vector $u$ on a plane $s^\perp$, the total number of collisions is \[ n\;=\;1+\Big\lfloor\tfrac{Ω-φ_{BC}}θ\Big\rfloor+\Big\lceil\tfrac{Ω-φ_{BC}}θ\Big\rceil, \] Through this concept, $D$ is recognised as giving $u$ a rotation with angle $θ$ which is determined by only mass ratios. And, we calculated energy transfer through collisions. With the work, we find that the change of energy is proportional to total momentum of two particles and average velocity of particles based on initial average velocity of A and B before collision.

2025-09-01T16:01:46Z 9 pages, 1 Tikz figure, no references Shuhei Kobayashi http://arxiv.org/abs/2509.04940v1 2025-09-05T09:03:29Z

The intricate complex eigenvalues of non-Hermitian Hamiltonians manifest as Riemann surfaces in control parameter spaces. At the exceptional points (EPs), the degeneracy of both eigenvalues and eigenvectors introduces noteworthy topological features, particularly during the encirclement of the EPs. Traditional methods for probing the state information on the Riemann surfaces involve static measurements; however, realizing continuous encircling remains a formidable challenge due to non-adiabatic transitions that disrupt the transport paths. Here we propose an approach leveraging the phase-locked loop (PLL) technique to facilitate smooth, dynamic encircling of EPs while maintaining resonance. Our methodology strategically ties the excitation frequencies of steady states to their response phases, enabling controlled traversal along the Riemann surfaces of real eigenvalues. This study advances the concept of phase-tracked dynamical encircling and explores its practical implementation within a fully electrically controlled non-Hermitian microelectromechanical system, highlighting robust in-situ tunability and providing methods for exploring non-Hermitian topologies.

2025-09-05T09:03:29Z 43 pages, 12 figures Commun Phys 8, 344 (2025) Sen Zhang Yangyu Huang Lei Yu Kaixuan He Ning Zhou Dingbang Xiao Xuezhong Wu Franco Nori Hui Jing Xin Zhou 10.1038/s42005-025-02275-y http://arxiv.org/abs/2509.04924v1 2025-09-05T08:42:06Z

We prove finite-time blowup of classical solutions for the compressible Upper Convective Maxwell (UCM) viscoelastic fluid system. By establishing a key energy identity and adapting Sideris' method for compressible flows, we derive a Riccati-type inequality for a momentum functional. For initial data with compactly supported perturbations satisfying a sufficiently large condition, all classical solutions lose regularity in finite time. This constitutes the first rigorous blowup result for multidimensional compressible viscoelastic fluids.

2025-09-05T08:42:06Z Sébastien Boyaval MATHERIALS, LHSV Na Wang BITSU Yuxi Hu CUMT http://arxiv.org/abs/2411.15588v2 2025-09-04T15:21:47Z

We show how to adapt the approach introduced for viscous damping in [1] to derive the approximate amplitude decay in the case of damping by a force of constant magnitude (sliding friction) and in the case of damping by a force proportional to the square of velocity (air resistance). We obtain two first-order differential equations from which we obtain the approximate time-dependent amplitudes corresponding to the considered damping forces. Our approach is suitable for first-year undergraduates, as it relies on the physical concepts and mathematical techniques they are familiar with.

2024-11-23T15:36:25Z The first version was revised to be an addendum to our paper Eur. J. Phys. 46(1) 015004 (2025). With this addendum, the trick of adding the energy dissipation rates is adapted for two other types of damping: sliding friction and air resistance Karlo Lelas Robert Pezer