https://arxiv.org/api/8B39U7TOAtiwn69xhgsYfxIb8CM 2026-04-12T16:25:53Z 9339 450 15 http://arxiv.org/abs/2507.09571v1 2025-07-13T10:39:36Z

We present a comprehensive study of gas leakage at interfaces based on Persson contact mechanics theory. A prototype syringe system consisting of a rubber stopper and a glass barrel is selected, where surface roughness is characterized using measurements from stylus profilometry and atomic force microscopy, and contact pressure distributions are obtained from Finite Element Method (FEM) calculations. Leakage prediction is performed using Multiscale Contact Mechanics (MCM) software. The predicted results show good agreement with experimental measurements under controlled dry conditions. Sensitivity analyses indicate that small variations in elastic modulus and contact pressure can significantly influence leakage, particularly near the percolation threshold. This work provides a generalized and validated framework for leakage prediction and offers practical guidance for the design of sealing systems in pharmaceutical and engineering applications.

2025-07-13T10:39:36Z R. Xu L. Gil J. Singer L. Gontard W. Leverd B. N. J. Persson http://arxiv.org/abs/2411.14660v3 2025-07-12T17:38:17Z

The development of rate- and state-dependent friction laws offered important insights into the key physical mechanisms of the frictional behaviour of fault gouges and their seismic cycle. However, past approaches were specifically tailored to address the problem of fault shearing, leaving questions about their ability to comprehensively represent the gouge material under general loading conditions. This work establishes an alternative approach for developing a physical friction law for fault gouges that is grounded on the rigour of the hydrodynamic procedure with two-scale temperatures through Terracotta, a thoroughly robust constitutive model for clay in triaxial loading conditions. By specifying the model for direct shearing, the approach yields an alternative friction law that readily captures the frictional dynamics of fault gouges, including explicit dependencies on gouge layer thickness, normal stress, and solid fraction. Validated against available laboratory experiments, the friction law retains the original predictive capabilities of Terracotta in triaxial conditions and explains the rate-and-state, dilatational behaviour of fault gouges in direct shear conditions. Finally, when the Terracotta friction law is connected to a spring-dashpot representation of the host rock, the combined model predicts an elastic buildup precursor to the onset of and subsequent seismicity, with results closely reflecting experimental evidence and field observations. While this study focuses on clay-rich gouges, the approach and findings are expected to offer much wider implications to a variety of materials.

2024-11-22T01:26:15Z Journal of Geophysical Research: Solid Earth, 130, e2024JB030822 Filippo Masi Itai Einav 10.1029/2024JB030822 http://arxiv.org/abs/2504.13326v2 2025-07-11T16:12:24Z

Locally resonant metamaterials are among the most studied types of elastic/acoustic metamaterials, with significant research focused on wave propagation in a continuum of "meta-atoms" Here we investigate the collision dynamics of two identical pendulum-suspended mass-in-mass resonators, essentially a two-sphere Newton's cradle, emphasizing the readily realizable scenario where the internal resonator frequency is much greater than the pendulum frequency. We first show that the dynamics of a collision can be described using effective parameters, similar to how previous metamaterials research has characterized wave propagation through effective material properties. Non-conventional collision dynamics -- observed in two colliding mass-in-mass systems where one is initially at rest -- include behaviors such as the moving sphere rebounding as if from a fixed wall while the other remains essentially stationary, the spheres coupling and moving forward in near-unison, and the spheres recoiling in opposite directions. These responses can be achieved by tuning the effective parameters. We demonstrate that these parameters can take on values that differ significantly from those in a conventional Newton's cradle. Additionally, we investigate multiple collisions of the two spheres, revealing complex dynamics. This work paves the way for the development and study of new "collision-based metamaterial" structures.

2025-04-17T20:25:15Z Simon A. Pope Oliver B. Wright 10.1103/2whk-jc4b http://arxiv.org/abs/2507.08251v1 2025-07-11T01:42:13Z

This paper addresses the significant challenge of recoil momentum accumulation during non-propulsive payload deployment for low-Earth-orbit mega-constellations. An efficient phase-based approximation algorithm is introduced, leading to over 90% faster computation while maintaining maximum ejection velocity errors below 1%. The analysis highlights that cumulative recoil velocity is the primary factor governing deployment capability, with excess velocity being approximately half of the cumulative recoil velocity. An analytical expression for predicting the maximum ejection velocity is derived, enabling rapid mission planning with less than 2% error. This framework establishes crucial operational boundaries concerning altitude differences, mass ratios, and deployment quantities for near-Earth orbits (up to 2,000 km), providing essential tools for the sustainable servicing of future constellations comprising over 200 satellites per orbital plane.

2025-07-11T01:42:13Z Li Zhengrui Li wenhao Feng Guanhua Yue Yuxian http://arxiv.org/abs/2507.07600v1 2025-07-10T09:59:29Z

The equilibrium distribution function determines macroscopic observables in statistical physics. While conventional methods correct equilibrium distributions in weakly nonlinear or near-integrable systems, they fail in strongly nonlinear regimes. We develop a framework to get the equilibrium distributions and dispersion relations in strongly nonlinear many-body systems, incorporating corrections beyond the random phase approximation and capturing intrinsic nonlinear effects. The theory is verified on the nonlinear Schrodinger equation, the Majda-McLaughlin-Tabak model, and the FPUT-beta model, demonstrating its accuracy across distinct types of nonlinear systems. Numerical results show substantial improvements over existing approaches, even in strong nonlinear regimes. This work establishes a theoretical foundation for equilibrium statistical properties in strongly nonlinear systems.

2025-07-10T09:59:29Z 6 pages, 4 figures Jialin Zhang Yong Zhang Hong Zhao http://arxiv.org/abs/2508.02675v1 2025-07-10T09:47:41Z

This article presents a mathematical framework for solving Maxwell's equations in cylindrical and spherical geometries with continuous angular indices. We extend beyond standard discrete harmonic decomposition to a continuous spectral representation using generalized spectral integrals, capturing electromagnetic solutions that exhibit singular behavoiur yet yield finite-energy fields at the geometric center. For continuous angular indices $\ell, m \in \mathbb{R}$, we study existence and uniqueness of solutions in weighted Sobolev spaces $H^s_{α(\ell,m)}(Ω)$ following the framework established in ~\cite{adams2003, reed1975}, prove finite energy for $\ell > -\frac{1}{2}$, and construct explicit spectral kernels via biorthogonal function systems. The framework encompasses both separable cylindrical modes with continuous azimuthal index $ν\in (0,1)$ and non-separable spherical modes where field components couple through vectorial curl operations. We present asymptotic analysis of singular field behavior, investigate convergence rates for spectral approximations, and validate the theoretical framework through Galerkin projection methods and numerical spectral integration.

2025-07-10T09:47:41Z Mustafa Bakr http://arxiv.org/abs/2507.08051v1 2025-07-10T08:05:46Z

Room impulse response estimation is essential for tasks like speech dereverberation, which improves automatic speech recognition. Most existing methods rely on either statistical signal processing or deep neural networks designed to replicate signal processing principles. However, combining statistical and physical modeling for RIR estimation remains largely unexplored. This paper proposes a novel approach integrating both aspects through a theoretically grounded model. The RIR is decomposed into interpretable parameters: white Gaussian noise filtered by a frequency-dependent exponential decay (e.g. modeling wall absorption) and an autoregressive filter (e.g. modeling microphone response). A variational free-energy cost function enables practical parameter estimation. As a proof of concept, we show that given dry and reverberant speech signals, the proposed method outperforms classical deconvolution in noisy environments, as validated by objective metrics.

2025-07-10T08:05:46Z in French language. GRETSI, Aug 2025, Strasbourg (67000), France Louis Lalay LTCI, IP Paris, S2A Mathieu Fontaine LTCI, IP Paris, S2A Roland Badeau S2A, LTCI, IP Paris http://arxiv.org/abs/2504.02347v2 2025-07-10T07:37:29Z

We investigate a quasi-one-dimensional (Q1D) system of hard spheres confined within a cylindrical pore so narrow that only nearest-neighbor interactions occur. By mapping this Q1D system onto a one-dimensional polydisperse mixture of nonadditive hard rods, we obtain exact thermodynamic and structural properties, including the radial distribution function, which had remained elusive in previous studies. We derive analytical results for limiting cases, such as small pore diameters, virial expansions, and the high-pressure regime. In particular, we identify a crossover in the anisotropic pressure components: at high densities, the transverse pressure overtakes the longitudinal one when the pore diameter exceeds a critical threshold. We also examine spatial correlations in particle arrangements and radial fluctuations, shedding light on the emergence of ordering in confined systems.

2025-04-03T07:32:49Z 17 pages, 12 figures; v2: change of title, new paragraphs and figures added J. Chem. Phys. 163, 024506 (2025) Ana M. Montero Andrés Santos 10.1063/5.0273930 http://arxiv.org/abs/2507.07478v1 2025-07-10T07:05:33Z

Dynamical magnetic levitation has attracted broad interest in the realm of physics and engineering. The stability analysis of such system is of great significance for practical applications. In this work, we investigate the stable magnetic levitation of a floater magnet above a rotating magnet and copper board system. The conditions for stable levitation are analyzed through both theoretical modeling and experimental observation. This study focuses on the interplay between magnetic forces, damping effects from the copper board, and rotational dynamics. We derive the equilibrium conditions, perform stability analysis, and present phase diagrams in parametric spaces of rotation speed and damping coefficients. The theoretical predictions show qualitative agreement with experimental results, particularly in demonstrating how damping is essential for stable levitation and how the stability region depends on the geometric and magnetic parameters of the system.

2025-07-10T07:05:33Z 8 pages, 9 figures, comments are welcome Mingjun Fan Jinyu Chen Yongquan Ji Long Li Chichuan Ma Yu-Han Ma http://arxiv.org/abs/2503.08054v3 2025-07-10T04:00:36Z

Artificial classical wave systems such as wave crystals and metamaterials have demonstrated promising capabilities in simulating a wide range of quantum mechanical phenomena. Yet some gaps between quantum and classical worlds are generally considered fundamental and difficult to bridge. Dynamics obeying special unitary groups, e.g., electronic spins described by SU(2), color symmetries of fundamental particles described by SU(3), are such examples. In this Letter, we present the experimental realization of universal SU(2) and SU(3) dynamic operations in classical mechanical oscillator systems with temporally modulated coupling terms. Our approach relies on the sequential execution of non-adiabatic holonomic evolutions, which are typically used in constructing quantum-logic gates. The method is swift and purely geometric and can be extended to realize more sophisticated dynamic operations. Our results open a new way for studying and simulating quantum phenomena in classical systems.

2025-03-11T05:19:34Z 23pages,7figures Phys. Rev. Lett. 135, 027201(2025) Congwei Lu Xulong Wang Guancong Ma 10.1103/24zr-pl3m http://arxiv.org/abs/2507.08042v1 2025-07-09T21:55:30Z

In the Comment the procedure for obtaining a solution for the electromagnetic potential, presented in the cited work arxiv:2507.02104, is analyzed. It is shown that the solution obtained by the authors is based on some mathematically illegal operations. This argument is supported by a counterexample to equation (10) of the cited work. Direct calculations of the potentials in the Lorenz and Coulomb gauges show that equation (10) is not satisfied.

2025-07-09T21:55:30Z 4 pages, no figures, amsart, comment on arXiv:2507.02104 Vladimir Onoochin http://arxiv.org/abs/2507.08041v1 2025-07-09T20:21:50Z

In Bell's spaceship paradox, a thread connects two spaceships moving with identical accelerations. As the ships accelerate in lockstep, the tension in the string increases due to the relativistic contraction and the string eventually breaks. What happens if instead of exactly matched accelerations, the changing tension in the string introduces small fluctuations that disrupt the lockstep acceleration? This relaxation of the requirement of lockstep acceleration dramatically changes the motion of the two ships. At a surprisingly small velocity, the two ships begin to move in a manner that maintains a constant proper distance between them. This allows the ships to accelerate indefinitely without breaking the string.

2025-07-09T20:21:50Z Len Zane http://arxiv.org/abs/2507.08033v1 2025-07-09T03:38:51Z

Two-dimensional (planar) rigid-body impact mechanics for application in automobile collisions have been described by a number of researchers over the last several decades. Little has been discussed, however, regarding three-dimensional rigid-body impact mechanics in this regard. Two commercially available accident simulation programs, PC-Crash and Virtual CRASH, offer three-dimensional rigid-body impact mechanics as one of their collision models but documentation of the complete development of their three-dimensional equations, particularly with respect to necessary constraint strategies at the impulse center, are not readily available. In this paper, a three-dimensional rigid-body impact mechanics derivation is presented. In order to solve the set of impact mechanics equations of motion it is necessary to develop constraint relationships. The constraint strategy described in the literature pertaining to the PC-Crash Full-Impact/Sliding-Impact scenarios for two dimensions is extended to the three-dimensional case and the ramifications regarding post-impact relative velocity at the impulse center is discussed. A second strategy in which an impulse component is aligned with the contact plane component of the initial relative velocity at the impulse center is presented and compared to the PC-Crash scenarios. Lastly, while these two strategies incorporate a single impulse ratio/friction parameter for the contact plane, a strategy involving two independent impulse ratio/friction parameters is briefly discussed.

2025-07-09T03:38:51Z Micky Marine http://arxiv.org/abs/2507.05889v1 2025-07-08T11:23:35Z

We give a general family of electromagnetic boundary conditions applicable to arbitrary space--time interfaces between electromagnetic media, which include the known space--only and time--only boundary conditions as special cases. These boundary conditions describe a broad class of electromagnetic interfaces, including surfaces in arbitrary motion, ultra-thin (metasurface) media, and cases where the media on one or both sides of the boundary can be both spatially and temporally dispersive. Our approach utilizes 4-dimensional spacetime and addresses the question of how, and in what ways, an electromagnetic field may be connected across a 3-dimensional hypersurface. We show that our proposed boundary conditions are the most general conditions consistent with causality and linearity.

2025-07-08T11:23:35Z 27 Pages, 4 figures Jonathan Gratus Simon A. R. Horsley Martin W. McCall http://arxiv.org/abs/2507.05780v1 2025-07-08T08:38:11Z

In this work, we investigate the structure and properties of the canonical energy momentum tensor (EMT) across a range of field theories. We begin by developing a unified and systematic method that naturally yields the canonical EMT for gauge theory, without the need for artificial symmetrization or improvement terms. Our analysis highlights how Noether's theorem intrinsically emphasizes the 1-form nature of gauge potentials. We further extend to general relativity and demonstrate that the assumption of metric compatibility naturally implies a torsion free connection. Building upon variational symmetry principles, we establish the equivalence between the Einstein Hilbert EMT and the canonical EMT, thereby clarifying their respective roles in field dynamics and conservation laws. Lastly, we present an alternative derivation of the Einstein field equations via Noether's theorem.

2025-07-08T08:38:11Z Peir-Ru Wang