A Symmetry-First Elementary Derivation of the Lorentz Transformation

2026-05-24T16:31:52Z

We present an elementary, symmetry-first derivation of the Lorentz transformation together with a methodological clarification of the linearity step. Starting from the Principle of Relativity, supplemented by spacetime homogeneity, isotropy, continuity in the event coordinates, and the absence of a distinguished inertial frame, we first establish linearity and then determine the general symmetry-constrained form of inertial-frame transformations. The inverse transformation is written with parameter $-v$, not as a separate technical theorem, but as the physically natural expression of the equivalence of inertial frames in the standard configuration. Transformation consistency is used in stages: its identity-and-inverse part constrains the remaining coefficients, while its composition part leads to a one-parameter family of inertial-frame transformations characterized by a universal constant $R$. The light postulate is introduced only in the final step, where it selects the physically relevant branch by fixing $R=-c^2$, thereby recovering the Lorentz transformation and identifying $c$ as maximal. The derivation is explicitly expository, making transparent several steps often compressed in standard treatments, especially the derivation of linearity, the elimination of transverse cross-terms, and the algebraic determination of the relative-velocity composition law. A central methodological point is that once homogeneity has reduced the problem to an additive transformation law, continuity, differentiability, and boundedness are equivalent regularity routes to the same linear class of inertial-frame transformations. In the present approach, only continuity in the event coordinates is assumed, while continuity in the velocity parameter emerges a posteriori from the explicit coefficient formulas.

Pulse Modulation as a Signature of the Asteroid-Neutron Star Collision Model for High-Energy Transients

2026-05-24T06:07:01Z

Asteroid-neutron star collision models have been proposed as possible sources of high-energy transients, such as gamma-ray bursts (GRBs) and fast radio bursts (FRBs). The sequence of events following the impact of the asteroid and finally dissolving into the neutron star can have several other observable consequences. We propose that due to the development of the off-diagonal moment of inertia (MI) components, the merger's aftermath can lead to the wobbling of the pulsar (assuming the neutron star happens to be a pulsar). Using sample values of various parameters, viz., size, shape, the locations of the deposits, and the pre-existing pulsar deformation parameter ($η$), we calculate the detailed pulse profile modulation of the pulsar. We observe a distinct pattern of pulse profile modulation on a characteristic timescale enhanced by a factor of $1/η$ compared to the pulse timing. Importantly, even small changes in the MI components, of order $ε$, can produce large pulse profile modulations of order $ε/η$ (depending on the relative location of asteroid material deposition). Thus, if an asteroid-neutron star collision is responsible for a high-energy transient, the associated pulse profile modulation may serve as a falsifiable observational signature of such an event.

Simple Pendulums in Simple Harmonic motion

2026-05-23T19:23:41Z

The motion of a simple pendulum in a uniform gravitational field can be described by the solution of a second-order differential equation, nonlinear differential equation. In practice we solve this equation using the small angle approximation relying on students familiarity with simple harmonic motion. This paper presents a straightforward method of finding the time equation of motion of a simple pendulum for small angular amplitudes, without having any recourse to solving the differential equation that governs its oscillations. This method relies on finding the indefinite integral of a certain relation derived from the conservation of mechanical energy of the system (Pendulum-Earth). And shows no need to the mathematical complexities in which differential equations are involved.

Exact solution of the Gaunt-modified Landau-Lifshitz equation in a plane wave

2026-05-23T19:14:42Z

We analyze electron dynamics in a plane electromagnetic wave using the Landau-Lifshitz equation with a quantum radiation reaction correction modeled by a Gaunt factor. In this geometry, the quantum parameter $χ$ depends solely on the lightfront momentum, allowing the modified equation of motion to retain the integrable structure of the classical problem. We derive an exact solution for the energy evolution and the four-velocity, which reduces to the known classical result in the appropriate limit. The results provide an analytical and deterministic description of semiclassical radiation reaction in plane-wave fields.

Universal Displacements in Linear Strain-Gradient Elasticity

2026-05-23T14:37:17Z

We study universal displacement fields in three-dimensional linear strain-gradient elasticity within the Toupin-Mindlin first strain-gradient theory. Building on the approach of Yavari (2020), we derive, for each material symmetry class, the universality PDEs obtained by requiring the equilibrium equations (in the absence of body forces) to hold for any material in that class, and we determine the complete set of universal displacements. Using the full symmetry classification together with compact matrix representations of the elasticity tensors, we provide explicit characterizations for all 48 strain-gradient symmetry classes, including centrosymmetric and chiral classes. For several high-symmetry classes, the strain-gradient universality PDEs impose no additional restrictions beyond the classical ones, so the universal displacement families coincide with those of classical linear elasticity (for example, the isotropic classes SO(3) and O(3)). For lower symmetry classes, the strain-gradient universality PDEs can be stricter than their classical counterparts, so the universal displacements form proper subsets of the classical universal displacement families due to additional higher-order differential conditions.

High-Discretization Method of Moments for Capacitance Calculation: A Cube and a Hollow Cylinder

2026-05-23T14:33:51Z

This paper employs the method of moments (MOM) to calculate the capacitances of a cube and a hollow cylinder. For the cube, each face was divided into a maximum of 600 x 600 sub-areas. By fully exploiting the geometric symmetry between sub-areas and incorporating parallel computing, computational resources were significantly conserved. Our results show that the calculated capacitance of the cube first increases and then decreases as the number of sub-areas increases. When each face was divided into 90 x 90 sub-areas, the capacitance of the unit cube (with an edge length of 1 m) reached a maximum reference value of 73.519014 pF. This indicates that higher accuracy cannot be achieved merely by indefinitely increasing the number of discretized sub-areas. Subsequently, the method was applied to compute the capacitance of a hollow cylinder. The results were compared with numerical solutions based on Lekner's theoretical formula and Cavendish's experimental values, showing good agreement among the three.

ChatMOSP: A Chemistry-Grounded Mobile Agent for Working-State Catalyst Simulations

2026-05-22T22:35:59Z

Catalytic nanoparticles restructure dynamically under reaction conditions, so their working morphology and activity are governed by temperature, pressure, and gas composition. However, converting experimentally specified environments into physically meaningful morphology-performance simulations remains difficult because the translation of reaction conditions into model-specific energetic, kinetic, and execution parameters requires the specialized knowledge in computational catalysis. Here we report ChatMOSP, a chemistry-grounded mobile scientific agent that translates natural-language and voice-expressed catalytic requests into parameter-validated simulations using the Multi-scale Operando Simulation Package. ChatMOSP maps catalyst identity, temperature, pressure, gas composition, and target observables onto multiscale structure reconstruction and kinetic Monte Carlo tasks, retrieves database parameters or constructs missing inputs from an online literature-retrieval workflow, and executes validated MOSP workflows. Using CO oxidation on Pd nanoparticles as an example, we verify the ChatMOSP simulations capture the temperature-induced transition from faceted to rounded morphologies observed by in-situ TEM experiments either by built-in database or from web-retrieved literature information when the parameters are absent. Moreover, we demonstrate the capability of ChatMOSP to perform end-to-end study at mobile devices to simulate a pressure-coverage-morphology-activity feedback cycle for Pt CO oxidation to interpret the oscillatory CO conversion. These results establish ChatMOSP as a physically constrained mobile agent for accessible and interpretable catalyst working-state simulations.

On radiation from hyperbolic motion, behavior of electromagnetic fields, and coordinate transformations at infinity

2026-05-22T08:48:19Z

We show explicitly that radiation from a uniformly accelerating charge escapes outside Rindler wedge, while within Rindler wedge there is no flux through infinity, neither in the Minkowski frame nor in the Rindler frame. This remains true despite the fact that the coordinate transformation between the Rindler and Minkowski frames is not trivial at infinity.

Revisiting Koehler's experiment of measuring the ratio of the specific heats of air by self-sustained oscillations

2026-05-22T07:55:16Z

We revisit Koehler's experiment, a clever modification of Ruchardt's experiment designed to measure the ratio of specific heats of gas. However, the lengthy and dense analysis shared by Koehler in his 1950 paper may pose challenges to readers due to the complexity of the calculations. Following Koehler's approximation for pressure changes, we explicitly present the model equations as piecewise linear differential systems and qualitatively analyze the periodic solutions from a geometric perspective. This concise and transparent approach addresses a fundamental question about Koehler's experiment: why is the oscillation frequency nearly equal to the Ruchardt frequency? Our analysis avoids intricate calculations and should help educators introduce Koehler's experiment in general physics laboratory classes

Emergent heavy-tailed distributions from a Markovian random walk

2026-05-21T18:08:27Z

The emergence of heavy-tailed statistics in complex systems is conventionally attributed to non-local stochastic jumps or non-Markovian memory. Here, we present a one-dimensional random walk where power-law behaviors arise instead from a strictly local, discrete-time Markovian mechanism. The step length is governed by a deterministic function of the walker's position, establishing a positive feedback loop that induces strong effective correlations along the trajectories. Through analytical derivations in the continuum limit and extensive numerical simulations, we show that this rule yields a robust, non-Gaussian stationary state. The exact analytical solution is obtained in the closed form of a symmetric, Lorentz-like distribution, $ρ_{\text{st}}(x) \propto (|x|/l+rΔx)^{-2}$, confirming asymptotic power-law tails that decay as $|x|^{-2}$ over six decades. Furthermore, by employing the Onsager-Machlup path-integral formalism, we demonstrate that effective velocity and acceleration acquire physical meaning along the shortest fluctuation trajectories. Crucially, we find that a non-zero initial acceleration acts as the fundamental mechanism driving the walker away from the origin, ensuring both the emergence of scale-free statistics and the normalizability of the stationary distribution. This minimal pathway provides a new microscopic foundation for the widespread $-2$ power law observed across multidisciplinary complex systems.

Dielectric insulated transmission lines in receiving antenna operation

2026-05-21T15:26:31Z

This work derives exact expressions for the voltage induced into a two conductors dielectrically isolated transmission line by a monochromatic incident plane wave from an arbitrary direction, at a given polarization. The transmission line cross section, consisting of the conductors and the dielectric material, may be of any shape, provided the cross section size is much smaller than the wavelength, so that the waves in radiation mode satisfy the quasi TEM condition. We calculate analytically the voltage along the transmission line for given end loads and compare the results with ANSYS HFSS simulation results. Our calculations are based on the knowledge of the radiation from such a transmission line, derived elsewhere and the radiation-absorption reciprocity.

Tensile wrinkling and creasing of an elastic half-space under a suction load

2026-05-21T14:38:10Z

A famous and thoroughly investigated instability set-up, susceptible to wrinkling and creasing, consists of an elastic half-space being prestressed under a dead load, applied at infinity and, possibly, on its surface. We consider the case of a pressure or a suction applied on the surface and show that wrinkling and creasing occur in a surprising way, completely different from dead load. With reference to incompressible neo-Hookean elasticity and assuming the prevalence of a uniaxial prestress state induced by the application of a uniform pressure, no wrinkling or creasing is foreseen, whereas -- unexpectedly -- they do when reversing the sign of pressure, which is then a suction, thus leading to tensile creasing and tensile wrinkling. When a biaxial prestress state is considered, it is shown that some loading paths can be envisaged, able to grow to infinity without causing any instability. Consequently, we suggest that, according to its sign, pressure can promote or delay surface instabilities, a finding which may have implications for mechanobiology or microfluidic fluid-structure interaction.

Poncelet property of planar elliptic integrable Kepler billiards

2026-05-21T06:28:25Z

We consider the integrable dynamics of a Kepler billiard in the plane bounded by a branch of a conic section focused at the Kepler center. We show that in this case, for non-zero-energy orbits, the lines of consecutive second orbital foci along a billiard trajectory are all tangent to a fixed circle. Based on this observation we analyse in details the integrable dynamics of a planar Kepler billiard inside or outside an elliptic reflection wall, with the Kepler center occupying one of its foci. We identify the associated elliptic curve on which the dynamics is linearized, and the shift defined thereon. We also discuss explicit conditions on $n$-periodicity using Cayley's criteria.

Macroscopic Thermodynamic Framework for the Mpemba Effect

2026-05-20T13:16:01Z

The counterintuitive Mpemba effect, wherein a hotter system cools faster, critically lacks a general macroscopic theory. Here, starting from linear irreversible thermodynamics, we formulate a generalized Newton's cooling law, $\mathrm{d}T/\mathrm{d}t = -[γ_0 + \mathcal{M}Q(t)](T-T_r)$, for a system at temperature $T$ relaxing in a thermal reservoir at $T_r$, where the bare relaxation rate $γ_0$ is modified by an initial-state memory term, $Q(t) \propto T(0)-T_r$. Arising from the interplay between heat flux and structural evolution, the coefficient $\mathcal{M}$ governs anomalous relaxation behaviors, where $\mathcal{M} > 0$ ($\mathcal{M} < 0$) induces the (inverse) Mpemba effect. This universal thermodynamic framework maps out phase diagram to provide general criteria for the Mpemba effect in complex systems, offering a macroscopic picture that bridges disparate microscopic approaches.

Development of a xenon triple point apparatus suitable for calibrating long-stem SPRTs and preliminary measurements of the temperature

2026-05-20T08:07:56Z

Xenon is of high chemical-physical stability and health compatibility. The xenon triple point (Xe TP) is accounted for a promising candidate replacing the mercury triple point (Hg TP) from the set of the defining fixed points of the international temperature scale ITS-90. The success of the alternative highly depends on the level of the realization of the Xe TP using long-stem standard platinum resistance thermometers (LSPRTs). We report in this article our study on the development of an immersion-type Xe TP apparatus, which is suitable for calibration of both LSPRTs and capsule standard platinum resistance thermometers (CSPRT). We realize the melting plateaus of the Xe TP using the continuous heating method on the apparatus. The effective melting plateaus extend for 8-12 hours long with temperature flatness range of 0.37 mK-1.0 mK over the melted fractions from 0.2 to 0.75. We find the axial heat leak contributing a principal effect influencing measurements of the Xe TP. We investigate the effect by varying the offset temperatures on the outer wall of the Xe TP cell. We measure the Xe TP using two LSPRTs upon correction of the axial heat leak. The new measurement, giving the Xe TP of 161.405 71 (55) K (k=1) at the melted fraction F=1.0, agrees well with those previously obtained by the adiabatic apparatuses. Their differences fall within 0.11 mK to 0.42 mK. by. Those differences are well covered by the estimated measurement uncertainty.