https://arxiv.org/api/2x+hR0esMomnV+TZ/78fMeOQPP4 2026-06-13T15:58:44Z 9441 390 15 http://arxiv.org/abs/2511.13871v1 2025-11-17T19:40:44Z

We introduce the correlation-efficient time-evolution (CETE) algorithm for simulating quantum many-body dynamics. CETE recasts each step of time evolution as a time-independent correlation problem: the ansatz begins from a mean-field single Slater determinant and is then correlated to capture the true time-evolved state. We derive this exact ansatz from a contraction of the time-dependent Schrödinger equation onto the space of two electrons. Unlike conventional evolution by sequential short-time propagators, which must both correlate and decorrelate the state as the degree of correlation fluctuates in time, CETE correlates only once. This substantially reduces circuit depth, extending accessible simulation times on near-term quantum devices. We demonstrate the approach by simulating the time evolution of the hydrogen molecule's electronic wavefunction, highlighting the potential for the CETE algorithm to simulate strongly correlated systems on near-term devices.

2025-11-17T19:40:44Z Michael Rose David A. Mazziotti http://arxiv.org/abs/2501.10445v2 2025-11-17T19:21:01Z

The spinning electron-electron interaction is described in classical terms by means of two possible classical interactions: The instantaneous Coulomb interaction between the charge centers of both particles and the Poincaré invariant interaction developed in a previous work. The numerical integrations are performed with several Mathematica notebooks that are available for the interested readers in the reference Section. One difference of these interactions is that the Poincaré invariant interaction does not satisfy the action-reaction principle in the synchronous description and, therefore, there is no conservation of the mechanical linear momentum. It is the total linear momentum of the system what is conserved. In this synchronous description the interaction is not mediated by the retarded fields but is described in terms of the instantaneous positions, velocities and accelerations of the center of charge of both particles. In the Poincaré invariant description the net binding force that holds linked two Dirac particles is stronger than in the Coulomb case, thus forming a stable spin 1 system of 2 Dirac particles. This bosonic state of spin 1 does not correspond to a Cooper pair because the separation between the centers of mass of the Dirac particles is below Compton's wavelength, smaller than the correlation distance of the Cooper pair. Since the Poincaré invariant interaction is relativistically invariant it can be used for analyzing high energy scattering processes.

2025-01-14T11:30:41Z 33 pages, 10 figures, Improved 4 Mathematica Notebooks with respect to previous version Juan Barandiaran Martin Rivas http://arxiv.org/abs/2503.06272v2 2025-11-17T16:42:42Z

As técnicas de aprendizado de máquina emergiram no contexto científico e se desenvolveram como ferramentas poderosas para enfrentar uma ampla gama de desafios na sociedade. A integração dessas técnicas com a física tem conduzido a abordagens inovadoras na compreensão, controle e simulação de fenômenos físicos. Este artigo visa proporcionar uma introdução prática às redes neurais e seus conceitos fundamentais, destacando perspectivas recentes dos avanços na interseção entre modelos de aprendizado de máquina e sistemas físicos. Além disso, apresentamos um material prático para orientar o leitor em seus primeiros passos na aplicação de redes neurais para resolver problemas físicos. Como exemplo ilustrativo, fornecemos quatro aplicações de complexidades crescentes para o problema de um pêndulo simples, a saber: fit de parâmetros da Equação Diferencial Ordinária (EDO) do pêndulo para aproximação de ângulo pequeno; Physics Informed Neural Networks (PINNs) para encontrar soluções da EDO do pêndulo em ângulo pequeno; Autoencoders em conjunto de dados de imagens do pêndulo para estimação de dimensionalidade do espaço de parâmetros do problema físico; uso de arquiteturas Sparse Identification of Non-Linear Dynamics (SINDy) para descoberta de modelos e expressões analíticas para o problema do pêndulo não linear (ângulos grandes).

2025-03-08T16:33:52Z 26 pages, 19 figures Gubio Gomes de Lima Gustavo Miranda Tiago de Souza Farias http://arxiv.org/abs/2511.13388v1 2025-11-17T13:59:25Z

Macroscopic modeling of a non-crimp fabric's (NCF's) forming behavior is challenging as it strongly depends on the textile architecture, fiber type, and stitching type. While shear is the main deformation mode of woven fabrics, membrane modeling approaches for NCFs should also consider stitching deformation and roving slippage. However, for 0{\textdegree}/90{\textdegree} biaxial NCFs (Biax-NCF) with a symmetrical stitching pattern and high stitch pretension, deviations from a pure-shear assumption in coupon tests are only observed at higher shear angles due to limited roving slippage. In this work, a hyperelastic approach initially proposed for unidirectional NCFs is adopted for a tricot stitched 0{\textdegree}/90{\textdegree} Biax-NCF based on a pure-shear assumption. The shear behavior is experimentally characterized through 45{\textdegree} off-axis-tension tests, and the parameterization is derived from energetic approaches originally developed for woven fabrics. This approach efficiently and adequately describes the general behavior in forming simulations of different geometries. Fiber orientation and location of areas with high shear angles are predicted well, but the peak shear angles are overestimated due to the neglected roving slippage.

2025-11-17T13:59:25Z ESAFORM 2025, May 2025, PAESTUM, Italy. pp.554-563 Bastian Schäfer KIT Dominik Dörr LaMCoS Naim Naouar LaMCoS Jan Paul Wank KIT Luise Kärger KIT http://arxiv.org/abs/2504.04254v2 2025-11-17T11:47:20Z

Coupled Kerr parametric oscillators (KPOs) are a promising resource for classical and quantum analog computation, for example to find the ground state of Ising Hamiltonians. Yet, the state space of strongly coupled KPO networks is very involved. As such, their phase diagram sometimes features either too few or too many states, including some that cannot be mapped to Ising spin configurations. This complexity makes it challenging to find and meet the conditions under which an analog optimization algorithm can be successful. Here, we demonstrate how to use three strongly coupled KPOs as a simulator for an Ising Hamiltonian, and estimate its ground state using a Boltzmann sampling measurement. While fully classical, our work is directly relevant for quantum systems operating on coherent states.

2025-04-05T19:28:17Z Phys. Rev. Lett. 135, 097201 (2025) Gabriel Margiani Orjan Ameye Oded Zilberberg Alexander Eichler 10.1103/npp4-b1xb http://arxiv.org/abs/2511.12585v1 2025-11-16T13:05:05Z

Numerical simulations of surface acoustic wave (SAW)-induced acoustic streaming are highly sensitive to the choice of second-order boundary conditions. This study systematically compares the no-slip (NS) and Stokes slip (SD) boundary conditions through different numerical approaches. Two- and three-dimensional simulations based on the Reynolds stress method are performed for standing SAW and travelling SAW devices. Results are validated against particle image velocimetry measurements of streaming patterns and velocities. We show that the SD condition yields Lagrangian velocity fields in significantly better agreement with experiments than the NS condition, accurately capturing vortex number, rotation direction, and amplitude across varying device geometries and operating conditions. In contrast, the NS condition overpredicts velocities by 1-2 orders of magnitude and often fails to reproduce experimentally observed vortex structures. These findings highlight the essential role of the Stokes drift boundary condition in modelling acoustic streaming and provide clear guidance for its use in future simulations of SAW-based acoustofluidic systems.

2025-11-16T13:05:05Z 16 pages, 13 figures Qinran Wei Suyu Ding Yang Zhao Yuanpeng Ma Dachuan Sang Dong Zhang Xiasheng Guo http://arxiv.org/abs/2511.12015v1 2025-11-15T03:39:30Z

This work analyses the 1921 article by Erich Bessel-Hagen entitled Über die Erhaltungssätze der Elektrodynamik ("On the conservation laws of electrodynamics"). The article is based on Noether's theorems, which were formulated by Emmy Noether in 1918 and concern consequences of symmetries of actions, including conservation laws. Bessel-Hagen firstly extends Noether's theorems to symmetries up to a divergence and next applies them to the n-body problem and to classical electromagnetism, especially to its conformal symmetries. The work explains the context in which Bessel-Hagen's article was written, the way his explanations proceeded and the significance of his results. It is argued in particular that Bessel-Hagen's article as much as Noether's are best considered as elements of Felix Klein's Erlangen programme. A close reading of Bessel-Hagen's text is also provided, as is its comparison with relevant works, including recent works by philosophers of physics Katherine Brading, Harvey Brown and Peter Holland. Such an approach helps to see where Bessel-Hagen's treatment is confused and to clarify it, as well as to estimate the advancement in our understanding of the relevant topics made within the last one hundred years.

2025-11-15T03:39:30Z Master thesis defended at the University of Strasbourg on 8 September 2020 Valeriya Chasova http://arxiv.org/abs/2507.04561v2 2025-11-13T22:23:16Z

Coherent synchrotron radiation (CSR) is crucial for the development of powerful ultrashort light sources. We present a mechanism for generating CSR in the form of generalised superradiance, based on surface plasmon polaritons (SPPs), which are resonantly excited on a solid, near-critical-density inner surface of a microtube. A high-intensity, circularly polarised laser pulse, propagating along the microtube axis, efficiently couples the cylindrical SPP modes. This process creates azimuthally structured, rotating electromagnetic fields. These rotating fields subsequently confine, modulate, and directly accelerate surface electrons to emit CSR in the Vavilov-Cherenkov angle. We further demonstrate that by improving the azimuthal symmetry of these electrons, the helical modulation enables CSR emission across all azimuthal directions in the form of isolated harmonics, significantly enhancing radiation intensity even when full coherence is imperfect. Our full 3D Particle-in-Cell simulations indicate this scheme can generate X-rays with coherence enhanced by up to two orders of magnitude compared to incoherent emission. The challenges to experimentally realise this scheme are discussed, including the need for high-contrast lasers to prevent pre-plasma formation and the demanding tolerances for microtube fabrication and alignment, while these challenges are not beyond the scope of existing or near-future experimental capabilities.

2025-07-06T22:26:28Z Bifeng Lei Hao Zhang Daniel Seipt Alexandre Bonatto Bin Qiao Javier Resta-Lopez Guoxing Xia Carsten Welsch 10.1103/cnym-16hc http://arxiv.org/abs/2511.10129v1 2025-11-13T09:35:15Z

Reinforced concrete rail bridges are essential components of railway infrastructure, where reliability, durability, and adaptability are key design priorities. However, the design process is often complicated by uncertainties stemming from unforeseen construction constraints, such as the need to reposition piers or alter geometric characteristics. These design adaptations can lead to repeated redesigns, added costs, and project delays if not anticipated in the early design stages, as well as significant computational overhead when using traditional finite element (FE) simulations. To address this and anticipate such unexpected events, this study adopts surrogate modeling as an efficient probabilistic design approach. This methodology integrates key geometric parameters as random variables, capturing the uncertainties that may arise during the design and construction phases and propagating them on the bridge's performance functions. By doing so, we aim to enable the efficient exploration of a large number of design scenarios with minimal reliance on time-consuming finite element (FE) simulations, represent the performance functions of a reinforced concrete bridge as a function of our variable design parameters, and classify the overall design scenarios into failure and safe scenarios In this study, a four-span reinforced concrete bridge deck is modeled using a multi-fiber finite element approach in Cast3M software. This FE model is used to generate the required design of experiments to train the surrogate models. Within this framework, a comparative performance assessment is conducted to evaluate the performance of the Kriging surrogate against alternative methods, including polynomial chaos expansion (implemented in UQLab) and support vector regression (SVR). This methodology supports early-stage uncertainty-informed design, enhancing the robustness and adaptability of reinforced concrete rail bridges in the face of practical constraints and changing site conditions.

2025-11-13T09:35:15Z WCRR 2025, Nov 2025, Colorado springs, United States Mouhammed Achhab LMPS Pierre Jehel LMPS Fabrice Gatuingt LMPS http://arxiv.org/abs/2502.15341v2 2025-11-13T04:45:16Z

In this paper, we propose one possible theoretical limit on the maximum ground speed of wheeled vehicles.

2025-02-21T09:57:18Z The paper has errors in it. The derivation is not correct Altay Zhakatayev Mukatai Nemerebayev http://arxiv.org/abs/2511.09273v1 2025-11-12T12:34:53Z

Integrating uncertainties in the design process of reinforced concrete rail bridges, in a fully probabilistic framework, makes their design more complex and challenging. To propagate these uncertainties and convey their influence on the performance of the engineering system, a high-dimensional design space is supposed to be explored. A great challenge to be considered here lies in the computational burden as conducting such an exploration campaign requires substantial calls to computationally expensive finite element simulations. To address this challenge, a surrogate model mapping the design space to the reinforced concrete bridge performance functions is developed in the context of an active learning algorithm. The importance of this model lies in its ability to explore as many design scenarios as possible with minimal computational resources and classify the design scenarios into failure and safe scenarios. This work considers a 4-span reinforced concrete bridge deck. A multi-fiber finite element model of this beam is developed in Cast3m to generate the required design of experiments for the surrogate model. A performance comparison is undertaken to evaluate the Kriging surrogate model effectiveness with and without active learning while the reliability of Kriging predictions is also assessed in comparison to PC-Kriging.

2025-11-12T12:34:53Z RUGC 2025, Jun 2025, Marseille, France Mouhammed Achhab LMPS Pierre Jehel LMPS Fabrice Gatuingt LMPS http://arxiv.org/abs/2511.06683v1 2025-11-10T04:02:49Z

Thermal management in small satellites is constrained by limited radiative area and strict mass budgets, necessitating the development of radiator structures that are simultaneously lightweight, thermally conductive, and mechanically robust. Here, we present a topology-optimization and design-space analysis framework for multifunctional lightweight radiators that achieve high specific stiffness and high effective thermal conductivity through simultaneous structural and thermal optimization. Density-based optimization produces hierarchical architectures that naturally form continuous cavities suitable for high-conductivity channels such as embedded heat pipes. The resulting microarchitectures exhibit Pareto behavior indicating efficient trade-offs between mass, stiffness, and thermal conductivity, while maintaining dynamic stability across a broad range of design parameters. Coupled structural-thermal analysis shows that voids used as thermal channels yield nearly isothermal radiating surfaces, confirming efficient lateral and transverse heat flow through the radiator. This integrated framework contributes toward the development of thermo-mechanically optimized radiator panels for small-scale spacecraft, enabling compact and efficient thermal control solutions.

2025-11-10T04:02:49Z 12 pages, 6 figures Karl Pederson Sam Keller Daniel Kindem Hayden Hommes Ognjen Ilic http://arxiv.org/abs/2511.06279v1 2025-11-09T08:32:51Z

This article answers the question of whether homogenization of discrete fine-scale mechanical models, such as particle or lattice models, gives rise to an equivalent continuum that is of Cauchy-type or Cosserat-type. The study employs the machinery of asymptotic expansion homogenization to analyze discrete mechanical models with rotational degrees of freedom commonly used to simulate the mechanical behavior of heterogeneous solids. The proposed derivation has general validity in both stationary (steady-state) and transient conditions (assuming wavelength much larger that particle size) and for arbitrary nonlinear, inelastic fine-scale constitutive equations. The results show that the unit cell problem is always stationary, and the only inertia term appears in the linear momentum balance equation at the coarse scale. Depending on the magnitude of the local bending stiffness, mathematical homogenization rigorously identifies two limiting conditions that correspond to the Cauchy continuum and the Cosserat continuum. A heuristic combination of these two limiting conditions provides very accurate results also in the transition from one limiting case to the other. Finally, the study demonstrates that cases for which the Cosserat character of the homogenized response is significant are associated with non-physically high fine-scale bending stiffness and, as such, are of no interest in practice.

2025-11-09T08:32:51Z 26 pages, 8 figures Journal of the Mechanics and Physics of Solids 207, article 106422, 2026 Jan Eliáš Gianluca Cusatis 10.1016/j.jmps.2025.106422 http://arxiv.org/abs/2507.16502v3 2025-11-08T15:49:55Z

We identify new families of duality-invariant theories of electrodynamics. We achieve this in two different ways. On the one hand, we present an algorithm to construct a one-parameter family of exactly duality-invariant theories from a single seed duality-invariant theory. If the seed theory is causal, the theories constructed from this method will also be causal when the parameter is non-negative. On the other hand, we find two additional novel families of duality-invariant theories which include a nonzero term independent of the electromagnetic field. The first of them generalizes Bialynicki-Birula electrodynamics, while the second family of theories features a well-defined Maxwell limit as the term independent of the gauge field strength is sent to zero.

2025-07-22T11:58:14Z 5 pages + appendices. Some citations added. New section in appendix added. Matches published version Ángel J. Murcia http://arxiv.org/abs/2501.03146v5 2025-11-07T01:07:53Z

After a brief history of the development of quality factor, useful expressions are derived for the robust input-impedance Qz(w) quality factor that accurately determines the VSWR fractional bandwidth of antennas for isolated resonances and a small enough bandwidth power drop. For closely spaced multiple resonances/antiresonances, a definitive formula is given for the increase in fractional bandwidth enabled by Bode-Fano tuning. Methods are given for determining the conventional and complex-energy quality factors of antennas from RLC circuit models. New field-based quality factors Q(w) are derived for antennas with known fields produced by an input current. These Q(w) are remarkably robust because they equal Qz(w) when the input impedance is available. Like Qz(w), the field-based Q(w) is independent of the choice of origin of the antenna fields and is impervious to extra lengths of transmission lines and surplus reactances. These robust field-based quality factors are used to derive new lower bounds on the quality factors (upper bounds on the bandwidths) of spherical-mode antennas that improve upon the previous Chu/CR (Collin-Rothschild) lower bounds for spherical modes. A criterion for antenna supergain is found by combining the Harrington maximum gain formula with the recently derived formula for the reactive power boundaries of antennas. Maximum gain versus minimum quality factor for spherical antennas are determined using the improved lower bounds on quality factor for different values of electrical size ka. Lastly, reduced antenna quality factors allowed by dispersive tuning overcome the traditional Chu/CR lower bounds for lower radiation efficiencies and small enough bandwidth power drops.

2025-01-06T17:12:44Z 19 pages, 9 figures IEEE Transactions on Antennas and Propagation, Vol. 74, pp. 3786-3803, May 2026 Arthur D. Yaghjian