https://arxiv.org/api/dVZ/7LIpSEL55mO+XWBknMZM3aQ 2026-06-13T13:39:13Z 9441 360 15 http://arxiv.org/abs/2510.00077v2 2025-12-08T03:36:47Z

There are several references in the public literature that discuss the effect impact-induced yaw motion has on the measurement of acceleration, vis-à-vis accelerometers, in automobile collisions [1], [2], [3], [4]. It is well-understood that direct integration of accelerometer data does not provide accurate velocity components for a vehicle undergoing appreciable rotational motion whether the accelerometers are installed at the vehicle center of gravity or not. Direct integration of accelerometer data is, nonetheless, how event data recorders (EDRs) calculate Delta-V components and care must be taken on the part of the analyst in interpreting this information when the vehicle from which it came was known to have experienced significant yaw motion. As such, in this paper we set out to: (1) examine whether the correct resultant Delta-V at the center of gravity can be determined from the directly-integrated EDR Delta-V components, and (2) to assess what useful Delta-V information can be readily gotten from EDRs that are typically not installed at the vehicle center of gravity.

2025-09-30T02:37:21Z Fixed typo on page 9. Changed equation (16) to equation (17) Modified text on page 10 for sake of clarity in paragraph immediately following equation (22) Micky Marine http://arxiv.org/abs/2512.06955v1 2025-12-07T18:26:08Z

Approach to the thermodynamic limit of a non-relativistic ideal gas in a periodic box is investigated. The single particle wave function obeys twisted boundary condition, $ψ(L)=e^{iθ}ψ(0)$ for which the free particle spectrum is constructed in terms of the twist angle, $θ$. The exact density of states is utilized to construct finite-size corrections of thermodynamic observables. Leading finite volume corrections in the free energy do not arise due to the boundary -- its implication for mixing entropy is examined. Finite volume corrections to the average energy, its fluctuations and the pressure are also examined with corrections arising exclusively through the boundary condition. However, the equation of state, the ratio of pressure to energy density, remains unmodified by the boundary.

2025-12-07T18:26:08Z 9 pages, 4 figures Prabal Adhikari Sona Baghiyan Rayn Samson http://arxiv.org/abs/2512.06766v1 2025-12-07T09:59:38Z

Halide exchange in lead-based halide perovskites has been studied extensively. While mixed Cl-Br or Br-I alloy compositions can be formed with no miscibility gaps, this is precluded for mixed Cl-I compositions, due to the large difference in Cl and I ionic radii. Here, we exploit perovskite-chalcohalide CsPbCl3-Pb4S3Cl2 heterostructures to study the Cl-I exchange and isolate new types of intermediate structures. The epitaxial interface between the Pb4S3Cl2 chalcohalide and the CsPbCl3 perovskite domain significantly influences the intermediate stages of halide exchange in the perovskite domain, leading to coexisting CsPbCl3 and CsPbI3 domains, thereby delivering segmented CsPbI3-CsPbCl3-Pb4S3Cl2 energetically favorable heterostructures, with partial iodide alloying of the CsPbCl3 domain and at the perovskite-chalcohalide interface. The I:CsPbCl3 domain between CsPbI3 and Pb4S3Cl2 enables a gradual lattice expansion across the heterostructure. This design accommodates interfacial strain, with a 5.6% mismatch at the CsPbCl3-CsPbI3 interface and a 3.4% mismatch at the perovskite-chalcohalide interface. Full halide exchange leads to CsPbI3-Pb4S3Cl2 heterostructures. Both in intermediate and fully exchanged heterostructures, the CsPbI3 domain is emissive. In the intermediate structures, the band alignment between the two perovskite domains is type-I, with carriers photogenerated in the CsPbCl3 domain quickly transferring to the CsPbI3 domain, where they can recombine radiatively.

2025-12-07T09:59:38Z Nikolaos Livakas Irina Skvortsova Juliette Zito Yurii P. Ivanov Aswin Asaithambi Andrea Toma Annick De Backer Muhammad Imran Sandra Van Aert Giorgio Divitini Ivan Infante Sara Bals Liberato Manna http://arxiv.org/abs/2512.06382v1 2025-12-06T10:26:58Z

We deal with a problem concerning a supposed inconsistency in the special relativistic treatment of the so-called linear Sagnac effect. It is shown that, under modern clothes, the root of the difficulty perceived by some authors lies in their uneasiness with the standard solution of the twin paradox. In particular, since the linear Sagnac effect is an absolute effect, no tinkering with conventionality of simultaneity, so far as it preserves the physical content of special relativity, would get us out of the supposed trouble.

2025-12-06T10:26:58Z 23 pages, 9 figures Marco Mamone-Capria http://arxiv.org/abs/2512.05596v1 2025-12-05T10:31:22Z

This study evaluates the thermal performance and environmental impact of wooden frame walls with clay-based plaster by using the complementary properties of both materials. Clay's moderate density and high thermal capacity enhance the thermal behaviour of wood structures, making it a valuable addition to lightweight constructions. At the material scale, the thermal properties of clay-based plaster were experimentally characterized and integrated into thermal dynamic simulations to assess the influence of internal and external wall configurations on the indoor temperature in the framework of overheating in summer. A life cycle assessment was conducted to compare the environmental impact of three walls: one made of concrete, a wooden frame wall, and another using wood frame wall with clay-based plaster.

2025-12-05T10:31:22Z International Conference CISBAT, Sep 2025, Lausanne, Switzerland. pp.142003 Z Boutayeb LMDC M Labat LMDC C Oms LMDC S Ginestet LMDC http://arxiv.org/abs/2512.05575v1 2025-12-05T09:55:46Z

Two-dimensional architected materials are often realized as periodic grids of elastic beams. Conventional homogenization methods represent these structures as equivalent elastic solids but neglect shear deformation in the constituent beams. This article addresses this limitation by incorporating shear deformability through Timoshenko beam theory, enabling accurate modeling of stubby beams. Moreover, shearable beams with extreme mechanical characteristics can be obtained through the design of appropriate microstructures. Introducing shearable beams into the grid expands the design space, allowing, for instance, the control of the effective Poisson's ratio beyond the limits achievable with slender beams.

2025-12-05T09:55:46Z 32 pages, 30 figures International Journal of Engineering Science 218 (2026) 104397 Matteo Franzoi Davide Bigoni Andrea Piccolroaz 10.1016/j.ijengsci.2025.104397 http://arxiv.org/abs/2512.04600v1 2025-12-04T09:21:35Z

Stellar streams offer one of the most sensitive probes of the Milky Way`s gravitational potential, as their phase-space morphology encodes both the tidal field of the host galaxy and the internal structure of their progenitors. In this work, we introduce a framework that leverages Flow Matching and Simulation-Based Inference (SBI) to jointly infer the parameters of the GD-1 progenitor and the global properties of the Milky Way potential. Our aim is to move beyond traditional techniques (e.g. orbit-fitting and action-angle methods) by constructing a fully Bayesian, likelihood-free posterior over both host-galaxy parameters and progenitor properties, thereby capturing the intrinsic coupling between tidal stripping dynamics and the underlying potential. To achieve this, we generate a large suite of mock GD-1-like streams using our differentiable N-body code \textsc{\texttt{Odisseo}}, sampling self-consistent initial conditions from a Plummer sphere and evolving them in a flexible Milky Way potential model. We then apply conditional Flow Matching to learn the vector field that transports a base Gaussian distribution into the posterior, enabling efficient, amortized inference directly from stream phase-space data. We demonstrate that our method successfully recovers the true parameters of a fiducial GD-1 simulation, producing well-calibrated posteriors and accurately reproducing parameter degeneracies arising from progenitor-host interactions. Flow Matching provides a powerful, flexible framework for Galactic Archaeology. Our approach enables joint inference on progenitor and Galactic parameters, capturing complex dependencies that are difficult to model with classical likelihood-based methods.

2025-12-04T09:21:35Z submitted to A&A, comments welcome, all source code to reproduce this work can be found on GitHub under the url: https://github.com/vepe99/sbi-sim/tree/odisseo_branch . The simulator \textsc{\texttt{Odisseo}} is available on GitHub at the following url: https://github.com/vepe99/Odisseo A&A 707, A363 (2026) Giuseppe Viterbo Tobias Buck 10.1051/0004-6361/202558358 http://arxiv.org/abs/2512.02591v1 2025-12-02T10:01:35Z

Sintering of printed porcelain filaments can be strongly affected by overhang geometry, thin features, and printing-induced anisotropy. These effects are particularly difficult to simulate because they require accurately capturing the interplay between sintering kinetics, viscous deformation, and macroscopic anisotropy. In this study, a robust and predictive model is established experimentally using anisotropic sintering dilatometry combined with overhang-deformation calibration through finite element simulations (FEM). The sintering behavior is identified using a porosity-temperature-independent minimization strategy applied to multi-rate dilatometry. Pellet anisotropy is incorporated via FEM by imposing directional sintering stresses. The deformation behavior is then calibrated by adjusting the shear viscosity to match overhang shapes deformation. The resulting model is finally validated on overhanging bar geometries. This step-by-step approach provides a comprehensive assessment of porcelain sintering while accurately capturing deformation mechanisms.

2025-12-02T10:01:35Z Journal of Materials Research and Technology, 2025 Fatima Hammoud CRISMAT Charles Manière CRISMAT http://arxiv.org/abs/2512.02586v1 2025-12-02T09:59:11Z

Indoor swimming pools (ISPs) consume significant amounts of electrical and thermal energy to ensure the heating of water and air, ventilation, and maintaining adequate humidity levels. This is measured in GWh per year for large installations, such as Olympic swimming pools (SPs). In this paper, the problem is initially addressed using a phenomenological approach at steady state of the air-water coupling, based on a real case study. The aim is to identify the key phenomena and the constraints that are the most sensitive, including those related to water and air quality management. A key action lever is found in evaporation, and more specifically, water temperature and the indoor dewpoint temperature, which act as its precursors. In a second step, two different strategies were tested to reduce energy consumption for water heating. It was determined that a strategy which incorporates night setback in conjunction with a precise restart time yields a maximum gain of 4%. The second strategy aims to enhance the energy recovery of thermal solar panels by enabling slight overheating of the pool. Its large volume provides effective energy storage, with estimated energy savings of up to 17% for a 1___ C overheating. This strategy appears to be a viable option, as it is straightforward to implement. However, the impact of water overheating on the energy consumption of AHU still needs to be analyzed and managed.

2025-12-02T09:59:11Z Solar Energy, 2026, 303, pp.114107 Younes Benakcha LMDC Matthieu Labat LMDC Ion Hazyuk ICA Stéphane Ginestet LMDC http://arxiv.org/abs/2510.16000v2 2025-12-01T16:16:34Z

Nanometric layer thickness imaging is crucial for fundamental research and characterization of micro fabricated devices. Here, we assess the potential of a non-contact opto-acoustic frequency domain laser ultrasound (FreDomLUS) microscopy technique for imaging nanometric thickness variations via GHz zero-group velocity (ZGV) elastic plate resonances. The method exploits the ZGV's lateral energy confinement that leads to sharp resonance peaks which can be effectively probed with the FreDomLUS technique at GHz acoustic frequencies. For demonstration purposes we introduced sub-10 nm height variation patterns in the topmost layer of solidly mounted bulk-acoustic wave resonators with a design frequency of around 1.7 GHz. They are raster-scanned to retrieve ZGV-frequencies from local acoustic spectra as a contrast quantity for imaging. We show how to retrieve quantitative height information by numerically calibrating the factor which inversely relates ZGV frequency change with the layer thickness change. Height variations in stacks with nominal thickness changes of 8 nm, 4 nm, and 1 nm can be resolved and indicate sub-nanometer depth resolution capabilities. The lateral resolution is studied by measuring the method's step edge function and it is found to be in the micrometer range. Atomic force microscopy imaging is used to validate the results.

2025-10-14T09:32:36Z Updated layout and acknowledgements Martin Ryzy Guqi Yan István Veres Thomas Berer Ivan Alić Clemens Grünsteidl Georg Watzl Georg Gramse Susanne Kreuzer http://arxiv.org/abs/2512.05997v1 2025-12-01T14:44:01Z

In 1857, Kirchhoff published two seminal papers on the motion of electricity in wires. In that work, he was the first to derive what we now call the telegrapher`s equations, which describes the propagation of electromagnetic signals along a cable at the speed of light, in some conditions. How was Kirchhoff able to describe electromagnetic propagation as early as 1857, when the notion of displacement current which is believed to be the essential ingredient for the propagation of electric and magnetic fields was not introduced by Maxwell until 1861 and fully explained later in 1865? In this paper, we show that Kirchhoff was the first, in his 1857 paper, to introduce the continuity equation when discussing electromagnetic propagation. We argue that the continuity equation used by Kirchhoff is a more fundamental concept now as it was in 1865 than displacement current. In our view, the dynamics of charged particles can be formulated without invoking fields, but the dynamics of fields cannot be formulated without a continuity equation describing the properties of matter.

2025-12-01T14:44:01Z Xavier Oriols Robert Eisenberg David K. Ferry http://arxiv.org/abs/2512.01521v1 2025-12-01T10:45:52Z

The present work explores the suitability of Al-Cu-Si ternary alloys as hightemperature metallic phase change materials (PCMs) for thermal energy storage systems (TESS) operating between 550__C and 850__C. While prior research has primarily focused on thermodynamic modeling or thermal property characterization below 600{\textdegree}C, this work provides a comprehensive experimental assessment of selected invariant compositions within the Al-Cu-Si system. CALPHAD calculations were performed using FactSage 8.2 software (SGTE and FTLite database) to guide alloy selection, followed by synthesis and detailed characterization of melting point, latent heat, specific heat, thermal diffusivity, and thermal conductivity. Critically, the thermal reliability of these materials was evaluated under repeated solid-liquid cycling up to 100 cycles in oxidizing atmospheres, revealing their stability and degradation profiles. Additionally, dilatometry and density analysis were conducted to provide an in-depth understanding of the alloys and practical properties for end users. Among the tested alloys, several demonstrated high volumetric energy densities (over 500 kWh/m${}^3$ for a temperature difference of 300{\textdegree}C) and good thermal durability, establishing Al-Cu-Si alloys as promising PCM candidates for industrial-scale high-temperature energy storage applications. This study fills a notable gap in the literature by combining phase selection, comprehensive thermophysical property evaluation, and long-term cycling analysis above 600{\textdegree}C.

2025-12-01T10:45:52Z Journal of Energy Storage, 2026, 143, pp.119635 Laura Teodorescu LITEN / CEA-DES, DTCH {Á}ngel Serrano BRTA Kyran Williamson BRTA Cristina Luengo BRTA Artem Nikulin BRTA Elena Palomo del Barrio LITEN / CEA-DES, UGA Grégory Largiller LITEN / CEA-DES, UGA http://arxiv.org/abs/2410.11343v2 2025-12-01T10:15:06Z

A six-dimensional reversible normal form system occurs in B{é}nard-Rayleigh convection between parallel planes, when we look for domain walls intersecting orthogonally (see Buffoni et al [1]). On the truncated system, we prove analytically the existence, local uniqueness, and analyticity in parameters, of a heteroclinic connection between two equilibria, each corresponding to a system of convective rolls. We prove that the 3-dimensional unstable manifold of one equilibrium, intersects transversally the 3-dimensional stable manifold of the other equilibrium, both manifolds lying on a 5-dimensional invariant manifold. We also study the linearized operator along the heteroclinic, allowing to prove (in [9]) the persistence under reversible perturbation, of the heteroclinic obtained in [1].

2024-10-15T07:18:20Z Gérard Iooss LJAD, IUF http://arxiv.org/abs/2512.01445v1 2025-12-01T09:28:53Z

We derive a linear model of navigation in a two-layer fluid with a variable velocity of the ship. A spectral version of the model including a Rayleigh damping term is analyzed. We prove that the Cauchy problem has a unique solution if the velocity and if the initial data are sufficiently regular. The case of a constant speed is thoroughly investigated and the importance of a critical speed which separates two types of regimes is pointed out. We propose a numerical scheme based on the discrete Fourier transform for the space discretization and on an exponential integrator for the time discretization. We prove an error estimate for the exponential integrator. Numerical experiments in one and two space dimensions complete the theoretical results.

2025-12-01T09:28:53Z Collections interdisciplinaire Zeina Rammal LMA [Poitiers] Matthieu Brachet LMA [Poitiers] Germain Rousseaux PPrime [Poitiers] Morgan Pierre LMA [Poitiers] http://arxiv.org/abs/2512.00458v1 2025-11-29T12:21:22Z

The method of image charges is a powerful and elegant technique in electrostatics, commonly used to determine the electric field generated by point charges near conductors of various shapes. While standard problems focus on single charges interacting with conductors, the behavior of multipoles in such configurations has received comparatively less attention, particularly beyond the well-studied case of a flat plane. In this paper, we explore the image formation of electric dipoles and quadrupoles near a conducting sphere and uncover a wonderful result: the image of a given multipole is not necessarily of the same type. Instead, alongside the expected multipole image, the resulting image configuration also includes lower-order multipole contributions. This finding broadens the understanding of electrostatic images and offers new insights into the interaction of multipoles with conducting boundaries.

2025-11-29T12:21:22Z 22 pages Farhang Loran Saman Moghimi-Araghi 10.1088/1361-6404/ae21a3