https://arxiv.org/api/6TV0t5yhONfJv7DgqJYRFcAZ8RU 2026-04-09T23:30:18Z 9338 345 15 http://arxiv.org/abs/2505.17900v3 2025-09-25T21:44:36Z

This paper revisits a model for the plasma frequency of a simple wire medium formed by a rectangular lattice of parallel metallic wires. We provide a comparative analysis of existing formulae for estimating the plasma frequency and derive a new expression. The proposed formula demonstrates superior accuracy for a square lattice of thin wires, with a relative error of less than $0.16\%$ for the ratio of wires radii to period smaller than $0.13$, significantly outperforming previously known results in this range. For rectangular lattices with the periods ratio from $2$ to $10$ the new formula provides estimations with a relative error less than $2.7\%$ for the ratio of wires radii to the smaller period less than $0.4$.

2025-05-23T13:48:43Z Denis Sakhno Pavel A. Belov http://arxiv.org/abs/2509.21432v1 2025-09-25T15:10:45Z

We report on measurements of the mechanical vibrations of the fundamental mode of resonant capacitive transducers, consisting of parallel plates at different gaps (10 - 26 $μ$m). Resonant frequency data were taken vs the electric field at constant charge, at various temperatures and different configurations. All measurements exhibited unexpectedly large tuning, caused by an additional, unpredicted attractive force. Such force has a divergent behaviour characterized by a critical electrical field and start to diverge long before the critical point. Many known physical mechanisms have been considered to explain this force, but all of them had to be discarded. Thus, we turn to non-conventional physical mechanisms and suggest that vacuum fluctuations inside the gap could be a possible cause of this anomalous force.

2025-09-25T15:10:45Z 14 pages + 3 appendices; 9 figures Yury Minenkov Massimo Bassan http://arxiv.org/abs/2509.20117v1 2025-09-24T13:40:30Z

The contradiction of micro-reversibility and macro-irreversibility is an old problem in statistical mechanics. This article argues that irreversibility is present even at the micro level because of the mechanical-electromagnetic interaction, so there may actually be no contradiction.

2025-09-24T13:40:30Z 8 pages Tamás Matolcsi http://arxiv.org/abs/2509.17821v2 2025-09-24T13:15:56Z

We present a probabilistic proof of the mean-field limit and propagation of chaos of a classical N-particle system in two dimensions with Coulomb interaction force of the form $f^N(q)=\pm\frac{q}{|q|^2}$ and $N$-dependent cut-off at $|q|>N^{-2}$. In particular, for typical initial data, we show convergence of the Newtonian trajectories to the characteristics of the Vlasov-Poisson system. The proof is based on a Gronwall estimate for the maximal distance between the exact microscopic dynamics and the approximate mean-field dynamics. Thus our result leads to a derivation of the Vlasov-Poisson equation from the microscopic $N$-particle dynamics with force term arbitrary close to the physically relevant Coulomb force.

2025-09-22T14:14:59Z Manuela Feistl-Held Peter Pickl http://arxiv.org/abs/2509.20064v1 2025-09-24T12:32:58Z

Vapor condensation is a physical phenomenon that finds application in heat removal systems. The traditional design of these systems involves round tubes but experience shows that this geometry is not optimal for heat transfer. Flattened tubes on the other hand, have been found to offer potential for improvement as their geometry increases the condensation surface, which fosters higher heat transfer rates. However, the effects of tube shape (aspect ratio) and orientation (rotation angle) on film-wise condensation dynamics are not fully understood. In this work, we numerically simulate a model of the condensed vapor layer thickness distribution on the flattened tube inner surfaces taking into account bulk and surface forces (gravity, surface tension, shear stress) for a thin layer of liquid. We consider various configurations of aspect ratios (circular, and AR = 2, 4, and 6) and rotation angles (0°, 10°, 20°, 30°, 45°, 60°, 75°, and 90°). Our simulations allow for an improved understanding of how these geometric parameters as well as their interplay, influence the thickness distribution of the condensate film on the tube's inner surface, and facilitate the identification of configurations that maximize heat transfer efficiency. Considering water as a working fluid, results show a possible heat transfer enhancement of up to 74% compared to the round tube geometry for an aspect ratio of 6 and a rotation angle of 90°.

2025-09-24T12:32:58Z Y. V. Lyulin D. Bugrov R. Khurmatova H. Ouerdane I. Marchuk http://arxiv.org/abs/2509.17637v1 2025-09-22T11:44:09Z

The ability of computational fluid dynamics (CFD) models to predict flow boiling at high heat flux and high flow velocity conditions has been investigated. High heat fluxes of about 10 MW/m 2 and high flow velocities of about 10 m/s typically appear in water cooling channels of divertor target elements in fusion reactors. In particular, the heat flux partitioning model used in the two-fluid CFD formulation was studied. CFD simulations of flow boiling in realistic divertor target cooling channels were performed and compared with conservative single-phase simulations. The predictive capability of CFD models for boiling was evaluated using experimental data, covering a wide range of flow velocities and heat fluxes. Existing CFD models correctly predicted void fraction and wall temperature at low flow velocities, but showed physically irrelevant results at higher velocities (above 3 m/s) leading to wall temperature overestimation. The study identified the wall heat flux partitioning model as the main contributor to the mispredictions and thoroughly discussed the main modelling shortcomings. By analysing the impact of operating conditions, some key boiling parameters, and state-of-the-art heat flux partitioning models, improvements of the model parameters are proposed. The simulations and model analyses are performed within the framework of the ANSYS CFX code and the results are compared with flow boiling experiments in uniformly and top-heated flow channels.

2025-09-22T11:44:09Z International Journal of Heat and Mass Transfer, 2026, 254, pp.127707 Boštjan Končar IRFM Matej Tekavčič IRFM Aljoša Gajšek IRFM Martin Draksler IRFM Joris Fellinger IRFM Marianne Richou IRFM http://arxiv.org/abs/2509.17616v1 2025-09-22T11:29:07Z

A dedicated experiment FEDORA (Fusion Experiment for Divertor Optimization Research Applications) has been constructed to visualize flow boiling at scaled fusion divertor conditions. Its main purpose is to obtain the information on local boiling parameters, needed for the development of mechanistic boiling models in Computational Fluid Dynamics (CFD) codes. Current boiling models, although grounded on realistic physical principles, still rely heavily on empirical correlations, particularly for boiling parameters such as nucleation site density, bubble departure diameter, and bubble departure frequency. Due to the harsh operating conditions in the water-cooled divertor plasma-facing components (high heat fluxes over 10 MW/m 2 , mean flow velocity of about 9 m/s), visualization of boiling in realistic cooling channels is not feasible. The proposed experiment addresses this challenge by employing a surrogate coolant, characterized by lower latent heat and saturation temperature. By analyzing key dimensionless numbers, the aim is to replicate boiling conditions to be similar to those in coolant channels of upcoming divertor designs. Distinctive features of the proposed experimental setup include visually transparent boiling channel, infra-red transparent window and a thin electrically heated foil. This setup allows simultaneous high-speed and high-resolution recording of boiling phenomena in the flow and measurement of temperature distribution on the heated surface. In this work, the design, similarity analysis and the first measurement results are presented, proving the concept of the visualization approach to understand the boiling heat transfer in divertor cooling channels.

2025-09-22T11:29:07Z Fusion Engineering and Design, 2025, 218, pp.115188 Aljoša Gajšek Gregor Kozmus Matej Tekavčič Marianne Richou Boštjan Končar http://arxiv.org/abs/2509.17545v1 2025-09-22T09:03:13Z

In wire-laser additive manufacturing (WLAM), producing parts with multiple entities requires optimizing both additive and subtractive processes. This involves adjusting positions and integrating machining operations. Geometric defects that occur during the components' deposition can affect subsequent entity production, making real-time measurement crucial. A contactless measuring system is essential to assess geometric deviations without complex post-processing. A comprehensive image stereocorrelation approach addresses this challenge. The produced geometry often has unaccounted features, such as rounded edges and corners. Superellipsoids serve as a versatile modeling tool for representing common geometries in WLAM and assessing dimensional and shape defects. Defined by three scale and two shape parameters, superellipsoids are introduced generally. This modeling tool is then combined with a global image correlation problem. The parameters defining this geometry are identified by minimizing the gray level difference between two images of a part. This approach is demonstrated in a case study, highlighting deviations in WLAM with a parameterized surface and paving the way for geometry updates in computer-aided manufacturing.

2025-09-22T09:03:13Z euspen's 25th International Conference \& Exhibition, Jun 2025, Zaragosa, Spain Khalil Hachem LURPA Yann Quinsat LURPA Christophe Tournier LURPA Nicolas Beraud G-SCOP http://arxiv.org/abs/2506.00559v3 2025-09-22T04:22:09Z

We discuss a classical anisotropic oscillator and the Foucault pendulum as examples illustrating non-conservation of action variables in integrable classical mechanical systems with adiabatically slow evolution. We also emphasize the importance of the mass parameter of a harmonic oscillator, alongside its frequency, in explicitly time-dependent situations.

2025-05-31T13:30:26Z 22 pages, 4 figures, to appear in American Journal of Physics Am. J. Phys. 93, 951-959 (2025) Fumika Suzuki Nikolai A. Sinitsyn 10.1119/5.0270675 http://arxiv.org/abs/2509.16906v1 2025-09-21T03:49:32Z

Underground lifelines, such as pipelines and tunnels, are susceptible to ground vibrations from seismic events, traffic, and other dynamic sources. Accurate prediction of their response is essential for ensuring structural safety and operability. This study introduces a semi-analytical model for transverse vibration analysis of buried lifelines, formulated using the Timoshenko beam theory on elastic foundation. The closed-form analytical solutions revealed that the vibration spectrum comprises four parts, separated by three transition frequencies. At each transition, the oscillatory characteristics of the modes change as a function of the system properties, leading to marked variations in dynamic amplification. The model's validity is confirmed through case studies of buried steel pipelines of varying lengths and operating conditions, showing excellent agreement with finite element simulations. A subsequent parametric study quantifies the influence of key factors - including soil stiffness and system length - on dynamic performance. The proposed method provides a computationally efficient and physically transparent framework for capturing complex vibration phenomena beyond simplified travelling-wave approaches, offering valuable guidance for the design and resilience assessment of underground lifeline systems subjected to various dynamic loads.

2025-09-21T03:49:32Z Presented at and accepted for publication in the official Proceedings of the 16th International Conference on Vibration Problems & 11th International Conference on Wave Mechanics and Vibrations (ICOVP & WMVC 2025), Lisbon, Portugal, September 2-5, 2025 Gersena Banushi Kenichi Soga http://arxiv.org/abs/2509.15528v1 2025-09-19T02:20:41Z

The method of images to solve certain electrostatic boundary-value problems is taught worldwide in undergraduate-level physics courses. Though it is also possible to employ this technique for solving magnetostatic boundary value problems, examples of this usage are rarely found in textbooks or physics pedagogy literature. In particular, the problem of finding the field due to a magnetic dipole kept in front of a superconducting sphere is an interesting one, because (i) it helps the students to compare with the grounded conducting sphere image problem in electrostatics, and (ii) offers a greater degree of difficulty since the source is a dipole (vector), rather than an electric charge (scalar). The present work demonstrates an intuitive way of solving the problem. The case in which the source dipole is oriented radially with respect to the sphere is solved with a single dipole image. In the case of the transverse orientation of the source dipole, we model the dipole as a current loop. Then, we find the image of the radial and transverse current elements that satisfy the boundary conditions. Then, we show that this method can be used to deduce the form of the image dipoles when the dipole is oriented in the transverse direction. This method is very much intuitive and accessible for undergraduate-level students.

2025-09-19T02:20:41Z 19 pages, 7 figures European Journal of Physics, Volume 46, Number 2. Published February 2025 Hemansh Alkesh Shah Kolahal Bhattacharya 10.1088/1361-6404/adaa3a http://arxiv.org/abs/2410.02767v2 2025-09-18T17:47:27Z

Nordic skiing provides fascinating opportunities for mathematical modelling studies that exploit methods and insights from physics, applied mathematics, data analysis, scientific computing and sports science. A typical ski course winds over varied terrain with frequent changes in elevation and direction, and so its geometry is naturally described by a three-dimensional space curve. The skier travels along a course under the influence of various forces, and their dynamics can be described using a nonlinear system of ordinary differential equations (ODEs) that are derived from Newton's laws of motion. We develop an algorithm for solving the governing equations that combines Hermite spline interpolation, numerical quadrature and a high-order ODE solver. Numerical simulations are compared with measurements of skiers on actual courses to demonstrate the effectiveness of the model. Throughout, we aim to illustrate how elementary concepts from undergraduate courses in calculus and scientific computing can be applied to study real problems in sport, which we hope will provide stimulating examples for both instructors and students. At the same time, we demonstrate how these concepts are capable of providing novel insights into skiing that should also be of interest to sport scientists.

2024-09-17T04:18:11Z 28 pages, 10 figures, 4 tables, 19 exercises, 7 supplementary materials Jane Shaw MacDonald Rafael Ordoñez Cardales John M. Stockie http://arxiv.org/abs/2509.14857v1 2025-09-18T11:24:15Z

This work addresses non-classically damped coupled oscillators with closely spaced modes focusing on the physics of modal interactions. Considering the simplest representative example in the form of an impulsively excited two-degree-of-freedom (two-DOF) system, we show that there is a single parameter defined as a coupling versus damping non-proportionality ratio, that separates two different dynamical regimes. Based on complexification-averaging analysis, we show that, below the critical value of this parameter, the system response possesses two distinct dissipation rates but only one frequency of oscillation; as a result, energy is slowly exchanged between modes in a single beat phenomenon. However, above the critical parameter value, the response has a single dissipation rate but two distinct oscillation frequencies; this yields an infinity of beat phenomena as energy is interchanged at a faster rate between modes. Our analytical predictions are fully validated by experimental measurements. Our findings highlight the physics of modal interactions in coupled oscillators and provide a framework for system identification and reduced-order modeling of systems with closely spaced modes.

2025-09-18T11:24:15Z Luis M. Baldelomar Pinto Alireza Mojahed Sobhan Mohammadi Keegan J. Moore Lawrence A. Bergman Alexander F. Vakakis http://arxiv.org/abs/2509.16269v1 2025-09-18T09:40:10Z

This book is devoted to an informal discussion of patterns constructed for treating physical problems. Such patterns, when sufficiently formalized, are usually referred as "models", and tents to be applied not only in physics, but conquer the fields traditionally occupied by other disciplines generally considered to be different from physics. The author calls this unification of seemingly disjoint results a "physmatical effect" - pointing to the fact that multitudes of fine - grained physics-based mathematical models become inextricably linked and networked. Mathematics serves as a key code gluing together isolated physical models viewed as nodes of this network.

2025-09-18T09:40:10Z This manuscript as a previous one was submitted by his wife Tatjana Znamenski, after S. Pankratow passed away. It was his wish to submit it and I was technically fulfilling this wish. However I could also add myself as a co -author if the system demands since I was helping my husband to pull the text together as many of his colleagues could confirm Sergej Pankratow http://arxiv.org/abs/2509.14690v1 2025-09-18T07:33:36Z

This article discusses electromagnetic properties of volumetric metamaterial samples with essentially discrete structure, that is, assembled as a periodic array of electromagnetic resonators. We develop an efficient numerical procedure for calculating quasi-static electromagnetic response precisely to analyse samples containing several million meta-atoms. We demonstrate that, contrary to a common belief, even million-``atoms'' samples with sharp edges are still quite different from uniform (``homogenised'') materials, and their properties are critically sensitive to their shape and boundary structure. We also compare our results with calculations based on the discrete dipole approximation as well as with an integral model for continuous particles, and analyse distinctions and similarities between the different approaches. In particular, discrete metamaterials present themselves as a stringent platform for assessing continuous models developed for finite objects with sharp edges. Overall, the reported results should be important for understanding mesoscopic systems with strongly interacting elements.

2025-09-18T07:33:36Z Aleksander O. Makarenko Maxim A. Yurkin Alexey A. Shcherbakov Mikhail Lapine