Enhanced dispersion of active microswimmers in confined flows

2025-10-06T15:30:43Z

In the presence of a laminar shear flow, the diffusion of passive colloidal particles is enhanced in the direction parallel to the flow. This classical phenomenon is known as Taylor-Aris dispersion. Besides, microorganisms, such as active microswimmers, exhibit an effective diffusive behavior at long times. Combining the two ingredients above, a natural question then emerges on how the effective diffusion of active microswimmers is altered in shear flows -- a widespread situation in natural environments with practical implications, \textit{e.g.} regarding biofilm formation. In this Letter, we investigate the motility and dispersion of \textit{Chlamydomonas reinhardtii} microalgae, within a rectangular microfluidic channel subjected to a sinusoidal Poiseuille flow. Using high-resolution optical microscopy and a particle-tracking algorithm, we reconstruct individual trajectories in various flow conditions and statistically analyze them through moment theory and sliding windowed demodulation. We find that the velocity fluctuations and the dispersion coefficient increase as the flow amplitude is increased, with only weak dependencies on the flow periodicity. Importantly, our results demonstrate that the generalization of Taylor-Aris law to active particles is valid.

Comprehensive Numerical Hydrodynamic Analysis of Submarine in a Straight Course Simulation Using Wall-Resolved RANS Models

2025-10-06T15:26:01Z

This research explores several critical factors affecting CFD-based prediction accuracy of submarine hydrodynamics and builds upon previous work on preliminary mesh and solver benchmarking. A scaled submarine model is analyzed numerically using the Reynolds-Averaged Navier-Stokes (RANS) turbulence model at a Reynold number (Re) of 3.6x106 with wall-resolved meshes targeting y+ <5. Based on prior work using a 13x106 cells mesh generated with SnappyHexMesh, a mesh convergence study was performed with increasing resolution of fine (15x106 cells), finer (18x106 cells), and finest (22x106 cells). Subsequently, five turbulence closure models which are k-$ω$ SST, k-$ω$ 2006, Lien Cubic, k-$ε$ Launder-Sharma, and Spalart-Allmaras were assessed for predictive performance and computational efficiency. Boundary layer fidelity was examined by comparing velocity profiles extracted from Cadence and SnappyHexMesh meshes against the theoretical law of the wall. In the final phase, the influence of appendages on local and global resistance was analyzed. The results presented that the finest mesh (22x106 cells) achieved a near mesh-independent solution with an error of 1.16% and extrapolated to less than 0.11% showing strong agreement with lab-scale data. Among the turbulence models, the k-$ω$ SST model demonstrated the most reliable performance, with resistance predictions less than 1.2% of error. In addition, the law-of-the-wall analysis illustrated that the Cadence allowed full resolution of the viscous sublayer, while SnappyHexMesh performance was constrained by wall-normal cell sizing. Appendage analysis revealed that the sail alone contributed up to 7.1% of the pressure drag and 7.7% of viscous drag, while the rudder added 3.7% and 5.6% respectively, indicating a substantial impact on overall resistance. These findings contribute to developing robust and accurate CFD strategies for submarine hydrodynamics and offer a reliable framework for future resistance evaluation and design assessment in complex maritime applications.

Assessment of hydrodynamic characteristics and computational resources for submarine resistance analysis: A comparative study between CFD Codes with application of the BB2 Submarine

2025-10-06T15:21:50Z

Submarines are vital for maritime defense, requiring optimized hydrodynamic performance to minimize resistance. Advancements in Computational Fluid Dynamics (CFD) enable accurate predictions of submarine hydrodynamics for optimal design. This study compared the meshing capabilities of OpenFOAM and commercial software as well as the performance of High-Performance Computing (HPC) and standard PC resources upon hydrodynamic characteristics. The RANS turbulence model with was employed to analyze the resistances of the MARIN's BB2-class submarine. CFD simulations were conducted at a model scale (1:35.1) at a speed of 1.8235 m/s ( of 21 knots) upon various mesh densities from 1 to 97 million cells. Empirical equations were initialized for turbulence parameters. Mesh sensitivity and iteration convergence ensured validated results. The findings showed that the results were validated with errors ranging from 0.3% to 10% across different mesh densities. The lowest error (0.3%) was achieved with 97 million cells generated by the commercial meshing tool with HPC, while 13 million cells by OpenFOAM with a standard PC resulted in a 3.4% error. Accuracy improved with precise initialization of turbulence parameters, mesh strategy, numerical schemes, and computing resources. The application of a standard PC with the OpenFOAM meshing tool was able to produce an acceptable accuracy, with less than 5% error for lower mesh densities. Thus, it can be suggested that using a standard PC was beneficial for preliminary hydrodynamic simulations. However, HPC with commercial software was essential for detailed industrial analyses, such as full-scale resistance and propulsion simulations.

Jefimenko Made Easy: Electromagnetic Fields through Retardation

2025-10-06T02:03:51Z

Oleg D. Jefimenko's electrodynamics textbook is unique in its approaches to deriving the electric and magnetic fields of arbitrary charge and current distributions and of an arbitrarily moving point charge. However, an uncommon form of the inhomogeneous wave equation often poses difficulties for readers right from the beginning. In this paper, we substitute in a commonly used form, making his approaches readily accessible.

Time-Symmetric Action-at-a-Distance Electrodynamics and the Principle of Action and Reaction for Particles at Relative Rest

2025-10-05T15:09:10Z

We investigate a theory of time-symmetric action-at-a-distance electrodynamic or gravitational interactions where the four-forces depend only on the electric charges, the rest masses, the position four-vectors, and the four-velocities of the two interacting particles, but not on their four-accelerations or higher derivatives. The goal is to prove that the principle of action and reaction is obeyed due to the fact that, for a given pair of corresponding infinitesimal segments along the worldlines of the two particles, the impulse of the advanced four-force and the impulse of the retarded four-force are equal in magnitude but opposite in direction. For two particles at relative rest, we derive this result as the outcome of a symmetry operation in flat conformal space. We start by assuming a positive spacetime interval between the two interacting particles, and we perform a conformal inversion (an improper inversion in a hypersphere), after which the two particles exchange their position and time coordinates and their rest masses. Then we perform an improper reflection across the axis connecting the two particles, after which the two particles recover their initial four-velocities, up to a minus sign. Two improper coordinate transformations are needed together in order to obtain a resulting positive Jacobian determinant. In the final step we go to the limit of a null spacetime interval between the endpoints of the corresponding infinitesimal segments. When the two interacting particles are at rest, or move with the same velocity, the initial and the final physical parameters that determine the four-forces are identical. Due to symmetry, the principle of action and reaction emerges. We make the conjecture that another, undetermined yet, symmetry operation must also apply, in order for the principle of action and reaction to hold even for particles moving with different velocities.

Assessment of Hybrid RANS-LES and WALE Formulations for Wake and Resistance Prediction of the BB2 Submarine

2025-10-03T15:53:25Z

Submarine hydrodynamics presents unique challenges in accurately predicting flow separation, wake structure, and resistance due to complex geometry and turbulent behaviour at high Reynolds (Re) numbers. Traditional Reynolds-Averaged Navier-Stokes (RANS) approaches are often limited in resolving unsteady flow structures and turbulence in the near and far regions. To address these limitations, hybrid RANS-LES models such as Detached Eddy Simulation (DES) and Large Eddy Simulation (LES) offer improved performance in capturing near-wall vortical structures. The capturing of turbulent vortices and wake structures significantly contributes to conduct hydrodynamic noise analysis. Detailed resolution and understanding of these coherent structures help minimize hydroacoustic signatures, essential for submarines' stealth characteristics. Based on prior studies, Breuer et al. (2003) reported that RANS failed to capture unsteady vortex shedding, producing only steady results even in 3D simulations. In contrast, DES and LES successfully resolved asymmetric shedding across different grid resolutions. Spalart (2009) reported that DES is more effective than RANS or LES for high Re flows, although it suffers from challenges related to ambiguous grids and nonmonotonic grid refinement behaviour. Whereas Liang \& Xue (2014) found that DES predicts tip vortex flow characteristics more accurately than RANS-SA and can capture complex 3D vortex structures. In addition, Guilmineau et al. (2018) demonstrated that the IDDES model accurately predicts recirculation bubbles and aligns more closely with experimental data for flow prediction. Long et al. (2021) confirmed the capability of DDES in simulating cavitating flows around hydrofoils and marine propellers. Lungu (2022) highlighted the efficiency and accuracy of the hybrid IDDES-SST model in DARPA submarine simulations. Zhang et al. (2023) also noted that URANS struggles with resolving small-scale turbulence structures, whereas IDDES is better suited for predicting complex phenomena such as ship air wake asymmetry. Nevertheless, capturing the unsteadiness and turbulence fluctuations scales is extremely challenging because the cell size requirements should suit each turbulence model employed. Thus, as a continuation of the prior work of Abidin et al. (2024), the unsteady simulation with high mesh resolution at $U_m=1.8235$ m/s and Re of $3.6\times 10^6$ to generate the asymmetrical wake dynamic and vortical structure. The current research expands the methodology by parameterizing the meshes and numerical scheme based on Taylor microscale refinement with respect to the characteristic length of (L, B and D) of submarine, particularly focusing on hybrid turbulence model and WALE to observe the ability to resolve turbulence in the wake region. The transient simulations were performed initially using wall-resolved mesh (76x10^6 cells) at y^+ < 5 and then wall-modelled mesh (56x10^6 to 74x10^6 cells) at y^+ > 30, which produced notably different and more detailed results (vortices and turbulence fluctuation) than previous steady-state RANS simulations without risking the accuracy of quantity of interest (global resistance).

Capillary lubrication of a spherical particle near a fluid interface

2025-10-03T05:29:24Z

The lubricated motion of an object near a deformable boundary presents striking subtleties arising from the coupling between the elasticity of the boundary and lubricated flow, including but not limited to the emergence of a lift force acting on the object despite the zero Reynolds number. In this study, we characterize the hydrodynamic forces and torques felt by a sphere translating in close proximity to a fluid interface, separating the viscous medium of the sphere's motion from an infinitely-more-viscous medium. We employ lubrication theory and perform a perturbation analysis in capillary compliance. The dominant response of the interface owing to surface tension results in a long-ranged interface deformation, which leads to a modification of the forces and torques with respect to the rigid reference case, that we characterise in details with scaling arguments and numerical integrations.

Lie Group Theory of Multipole Moments and Shape of Stationary Rotating Fluid Bodies

2025-10-02T17:17:59Z

We present a rigorous framework for determining equilibrium configurations of uniformly rotating self-gravitating fluid bodies. This work addresses the longstanding challenge of modeling rotational deformation in celestial objects such as stars and planets. By integrating classical Newtonian potential theory with modern mathematical tools, we develop a unified formalism that improves both the precision and generality of shape modeling in astrophysical contexts. Our method employs Lie group theory and exponential mapping to characterize vector flows associated with rotational deformations. We derive functional equations for perturbations in density and gravitational potential, resolved analytically using the shift operator and Neumann series. This extends Clairaut's classical linear theory into the nonlinear regime. The resulting formulation yields an exact nonlinear differential equation for the shape function, describing hydrostatic equilibrium under rotation without assuming slow rotation. This generalized Clairaut equation incorporates nonlinear effects and accommodates large rotational speeds. We validate the theory by deriving exact solutions, including the Maclaurin spheroid, Jacobi ellipsoid, and the unit-index polytrope. We also introduce spectral decomposition techniques to analyze radial harmonics of the shape function and gravitational perturbations. Using Wigner's formalism for angular momentum addition, we compute higher-order spectral corrections and derive boundary conditions for radial harmonics. This enables accurate computation of Love numbers and gravitational multipole moments, offering a comprehensive, non-perturbative approach to modeling rotational deformations in astrophysical systems.

Multi-scale friction coefficient: From roughness to system computation using deep learning

2025-10-02T07:26:56Z

The presence of surface defects (roughness, surface imperfections, profiles, etc.) in a contact inevitably leads to the modification of its local properties, such as the coefficient of friction. In railway wheelsets, this surface condition is crucial as it dictates appropriate fatigue design for the final use. However, these local phenomena are not well understood and require a real step back. Therefore, the aim of this paper is to propose a multiscale numerical strategy to better understand these phenomena. The multiscale strategy is divided into two steps. Initially, an analysis by the Discrete Element Method (DEM) modelling the interaction of generated rough surfaces is carried out to determine the coefficient of friction. In a second step, the results of DEM are introduced into a structural calculation where the enrichment of the coefficient of friction is done on each finite element contact. Given the wide variety of potential surface defects (size, distribution, height, etc.), a large number of DEM simulations is performed. A specially developed deep learning program is then used to account for these dispersions. The application targeted in this paper is the fitting of a wheel on a railway axle.

Generalized Time-Coarse Graining via an Operator Cumulant Expansion

2025-10-01T00:52:10Z

We introduce a general framework for deriving effective dynamics from arbitrary time-dependent generators, based on a systematic operator cumulant expansion. Unlike traditional approaches, which typically assume periodic or adiabatic driving, our method applies to systems with general time dependencies and is compatible with any dynamics generated by a linear operator -- Hamiltonian or not, quantum or classical, open or closed. This enables modeling of systems exhibiting strong modulation, dissipation, or non-adiabatic effects. Our approach unifies Hamiltonian techniques such as Lie-transform Perturbation Theory (LPT) with averaging-based methods like Time-Coarse Graining (TCG), revealing their structural equivalence through the lens of generalized cumulants. It also clarifies how non-Hamiltonian terms naturally emerge from averaging procedures, even in closed systems. We illustrate the power and flexibility of the method by analyzing a damped, parametrically driven Kapitza pendulum, a system beyond the reach of standard tools, demonstrating how accurate effective equations can be derived across a wide range of regimes.

Harnessing Oscillatory Dynamics for Reprogrammable Mechanical Functionality

2025-09-30T14:27:17Z

A long-standing goal in the field of "mechanical computing" is the creation of truly reprogrammable mechanical structures, where the function of each unit can be dynamically defined, modified, and accessed on demand, much like rewriting data on a hard drive. Prior efforts have largely focused on bistable building blocks, which mimic binary states, but robust and efficient methods for programming large arrays of such units remain limited. In this study, we introduce a new approach for defining and reconfiguring the state of mechanical bits. Specifically, we investigate arrays of pendula whose boundary conditions break symmetry, effectively transforming them into mechanical bits. When actuation times are short compared to the natural oscillation periods, the state of each pendulum can be controlled solely by adjusting the timing of global boundary conditions. This mechanism enables rapid reprogramming, arbitrary information writing, and even the construction of a "mechanical piano" capable of generating user-defined note and chord sequences within only a few oscillation cycles. Because it integrates seamlessly with diverse functionalities, our strategy establishes a scalable framework for reprogrammable mechanical systems and can be readily generalized to other oscillatory systems like membranes or beams.

Magnetic moments in the Poynting theorem, Maxwell equations, Dirac equation, and QED

2025-09-29T16:04:09Z

The role of magnetic moments in classical and quantum electrodynamics is examined in this work. The effects are described by a classical extended Poynting theorem and extended Maxwell equations and by conventional quantum electrodynamics expressed in terms of electromagnetic fields. Both descriptions take into account energetics of the interaction of magnetic moments with inhomogeneous magnetic fields. We show how magnetic moment effects are included in either version of electrodynamics and that these apparently different formulations can give consistent results. In either case, we express the interactions in terms of electromagnetic fields only, avoiding use of a vector potential. The main focus is on magnetic dipole interactions, and magnetic monopole interactions are not considered.

Exact shape of an ideal heavy spring suspended at both ends

2025-09-26T18:37:03Z

In the present article we determine the exact shape of an ideal spring suspended at both ends. Historically, this goes under the name of Elastica problem. The total energy of the suspended spring is a functional depending on two independent functions: on one hand the function describing the shape of the hanging spring, on the other hand a non-negative function describing the mass distribution along the elongated spring. Calculus of Variations provides a rather short and elegant solution. This method does not appear to be widely known in the literature.

Coupled Dipole Oscillation Enabled Scintillation Compensation in Turbulence-Impacted Laser Beam

2025-09-26T08:38:30Z

The present work develops a rigorous framework for collective dipole oscillations in dense dielectric media by extending the Lorentz oscillator model to include both quadratic (second order) and cubic (third order) nonlinear restoring forces. Dipole-dipole interactions are incorporated via the dyadic Greens function, leading to a nonlocal description of the medium. Starting from the generalised oscillator equation, the system is expressed in matrix form with an effective stiffness matrix. Using a harmonic steady state ansatz, nonlinear terms are approximated in the frequency domain. Diagonalisation provides collective normal modes, which serve as a basis for perturbative expansion zeroth order captures the linear response, while higher orders describe nonlinear corrections. The polarisation is expressed through corrected mode amplitudes, yielding an effective nonlinear nonlocal susceptibility kernel. Finally, the scalar Greens function formalism is applied to derive the structured output field. These approaches bridge microscopic dipole dynamics with macroscopic optical propagation, offering key insights into nonlinear light matter interaction and turbulence influenced field evolution.

Mean-field theory of the general-spin Ising model

2025-09-25T21:55:20Z

Motivated by modelling in physics and other disciplines, such as sociology and psychology, we derive the mean field of the general-spin Ising model from the variational principle of the Gibbs free energy. The general-spin Ising model has $2k+1$ spin values, generated by $-(k-j)/k$, with $j=0,1,2\ldots,2k$, such that for $k=1$ we obtain $-1,0,1$, for example; the Hamiltonian is identical to that of the standard Ising model. The general-spin Ising model exhibits spontaneous magnetisation, similar to the standard Ising model, but with the location translated by a factor depending on the number of categories $2k+1$. We also show how the accuracy of the mean field depends on both the number of nodes and node degree, and that the hysteresis effect decreases and saturates with the number of categories $2k+1$. Monte Carlo simulations confirm the theoretical results.