https://arxiv.org/api/PTSVU68W3ZZuYtjZswtW5IZAHJE 2026-06-10T23:06:37Z 9436 315 15 http://arxiv.org/abs/2510.26360v2 2026-01-04T22:38:10Z

Materials that dissipate energy efficiently under high-speed impacts, from micrometeoroid strikes on spacecraft to ballistic penetration in protective systems, are essential for maintaining structural integrity in extreme environments. Yet, despite decades of study, predicting and comparing impact performance across materials, geometries, and length scales remains challenging because conventional projectile-impact models often rely on conservation-based or empirically partitioned descriptions that assume the projectile-target interaction is a closed system. Here, we relax this assumption and directly observe the momentum and energy transferred out of the projectile during impact. We find that the momentum transferred to the target consistently reaches its maximum at the ballistic-limit velocity, demonstrated through a coordinated suite of micro-projectile impact experiments spanning varied projectile diameters, target thicknesses, and impact velocities, and further supported by targeted macroscale tests. This behavior is reinforced across a broad range of independent studies encompassing metals, polymers, composites, sandwich panels, and reinforced concrete, with thicknesses ranging from nanometers to hundreds of millimeters and projectiles of spherical, blunt, ogive, and conical shape, under both normal and oblique impacts. Together, these observations reveal a consistent impact behavior across all available data: maximum momentum transfer occurs at the ballistic limit. Extending this bound into the energy absorption landscape addresses an entrenched misconception in the field by revealing that specific energy absorption inherently inflates the performance of thinner targets due to geometric normalization, rather than reflecting genuine material enhancement.

2025-10-30T11:08:47Z Yasara Dharmadasa Nicholas Jaegersberg Ara Kim Jizhe Cai Ramathasan Thevamaran http://arxiv.org/abs/2601.01135v1 2026-01-03T09:43:54Z

Mechanosensitive ion nanochannels regulate transport by undergoing conformational changes within nanopores. However, achieving precise control over these conformational states remains a major challenge for both artificial soft or solid pores. Here, we propose an alternative mechanism that modulates the charge carrier density inside nanopores, inspired by transistors in solid-state electronics. This strategy leverages a novel phenomenon of confinement-regulated ion clustering in two-dimensional extremely confined nanochannels, revealed by extensive $μ$s-scale enhanced-sampling molecular simulations based on an \emph{ab initio}-refined force field and nucleation theory. The resulting \emph{force-ion transistor} enables mechanically gated control of ion transport and provides a conceptual foundation for designing ionic mechanical logic gates. Our findings offer new insights into piezochannel mechanosensing and electromechanical coupling in biosystems beyond conformational signaling, opening pathways to integrate artificial ion channels with neuromorphic devices for processing mechanical stimuli.

2026-01-03T09:43:54Z Ke Zhou http://arxiv.org/abs/2601.00643v1 2026-01-02T11:02:29Z

The dynamics of filaments in flow are central to understanding a wide range of biological and soft-matter systems, yet their behavior under time-dependent forcing remains poorly understood. Here, we investigate the long-time dynamics of Brownian inextensible elastic filaments subjected to strong uniform oscillatory shear by combining microfluidic experiments on actin filaments with numerical simulations based on a fluctuating Euler-Bernoulli elastica model in a viscous fluid. As the oscillation period increases, irreversibility emerges from the interplay of flow-induced deformations and thermal noise. This leads to a departure from reversible, deterministic rigid-body dynamics: in this regime, the filaments cycle between nearly straight, flow-aligned conformations at full periods and buckled shapes at half periods. Owing to the time-glide symmetry of the system, two such attracting states in fact coexist with a phase shift of half a period. The system spontaneously selects one, but occasionally switches between them as a result of noise, producing intermittent transitions between apparent order and disorder. This system constitutes an experimentally accessible realization of stochastic symmetry breaking, attractor hopping, and intermittency in a minimal nonequilibrium soft-matter system, with novel implications for the design and control of soft matter systems under time-dependent flows.

2026-01-02T11:02:29Z 12 pages, 6 figures Francesco Bonacci Brato Chakrabarti Olivia du Roure Anke Lindner David Saintillan http://arxiv.org/abs/2401.00911v3 2026-01-01T00:59:52Z

This is an introduction to calculus, and its applications to basic questions from physics. We first discuss the theory of functions $f:\mathbb R\to\mathbb R$, with the notion of continuity, and the construction of the derivative $f'(x)$ and of the integral $\int_a^bf(x)dx$. Then we investigate the case of the complex functions $f:\mathbb C\to\mathbb C$, and notably the holomorphic functions, and harmonic functions. Then, we discuss the multivariable functions, $f:\mathbb R^N\to\mathbb R^M$ or $f:\mathbb R^N\to\mathbb C^M$ or $f:\mathbb C^N\to\mathbb C^M$, with general theory, integration results, maximization questions, and basic applications to physics.

2024-01-01T00:24:33Z 400 pages Teo Banica http://arxiv.org/abs/2601.00903v1 2025-12-31T19:38:41Z

Contrary to widespread belief, magnetostatic field lines do not ordinarily form closed loops. Why, then, are they in fact closed for so many familiar examples? What other topologies are possible, and what current configurations generate them?

2025-12-31T19:38:41Z Am. J. Phys. 92, 583-592 (2024) Joel Franklin David Griffiths Darrell Schroeter 10.1119/5.0186335 http://arxiv.org/abs/2512.25024v1 2025-12-31T18:22:10Z

It is often assumed that the most general transformation between two inertial reference frames is affine linear in their Cartesian coordinates, an assumption which is however not true. We provide a complete derivation of the most general inertial frame transformation, which is indeed nonlinear; along the way, we shall find that the conditions of preserving the Law of Inertia take the form of Schwarzian differential equations, providing perhaps the simplest possible physics setting in which the Schwarzian derivative appears. We then demonstrate that the most general such inertial transformation which further preserves the speed of light in all directions is, however, still affine linear. Physically, this paper may be viewed as a reduction of the number of postulates needed to uniquely specify special relativity by one, as well as a proof that inertial transformations automatically imbue spacetime with a vector space structure, albeit in one higher dimension than might be expected. Mathematically, this paper may be viewed as a derivation of the higher-dimensional analog of the Schwarzian differential equation and its most general solution.

2025-12-31T18:22:10Z 20 pages Nicholas Agia http://arxiv.org/abs/2601.00032v1 2025-12-30T08:49:15Z

This paper investigates the dynamics of nonholonomic mechanical systems, focusing on fundamental variational assumptions and the role of the transpositional rule. We analyze how the Cetaev condition and the first variation of constraints define compatible virtual displacements for systems subject to kinematic constraints, including those nonlinear in generalized velocities. The study explores the necessary conditions for commutation relations to hold, clarifying their impact on the consistency of the derived equations of motion. By detailing the interplay between these variational identities and the Lagrangian derivatives of constraint functions, we elucidate the differences between equations of motion formulated via the d'Alembert--Lagrange principle and those obtained from extended time-integral variational principles. This work aims to provide a clearer theoretical framework for applying these core principles to nonholonomic dynamics.

2025-12-30T08:49:15Z Federico Talamucci http://arxiv.org/abs/2601.00031v1 2025-12-30T05:49:36Z

We study the electrostatics of a thin, finite-length conducting cylindrical shell held at constant potential V0. Exploiting axial symmetry, we recast the problem as a one-dimensional singular integral equation for the axial surface-charge density, with a kernel written in terms of complete elliptic integrals. A Chebyshev-weighted collocation scheme that incorporates the square-root edge singularity yields rapidly convergent charge profiles and dimensionless capacitances for arbitrary aspect ratios L/a, recovering known long- and short-cylinder limits and providing accurate benchmark values in the intermediate regime. The method offers a compact, numerically robust reference formulation for the electrostatics of finite cylindrical conductors.

2025-12-30T05:49:36Z J. Ricardo de Sousa http://arxiv.org/abs/2601.00858v1 2025-12-30T05:09:24Z

We develop an exact electrostatic formulation for a finite-length conducting cylindrical shell of finite thickness separating two dielectric media with arbitrary permittivity contrast. The boundary-value problem is reduced to a coupled system of singular integral equations with elliptic kernels governing the induced surface-charge densities on the inner and outer faces. High-accuracy numerical solutions are combined with a systematic asymptotic analysis that elucidates the interplay between geometry, thickness, and dielectric contrast. All classical limiting regimes are recovered, including the slender-body limit, the short-cylinder (ring-like) asymptote, and the thick-shell regime dominated by the outer surface. We demonstrate that the logarithmic short-cylinder behavior of zero-thickness models is a singular feature, which is regularized for any finite thickness, giving rise instead to a finite capacitance plateau. The asymptotic structure of the coupled equations explains both the electrostatic decoupling of the inner cavity in the thick-shell limit and the redistribution of charge between the two surfaces. The results provide exact benchmarks for finite cylindrical conductors, bridging classical analytical treatments and modern numerical approaches, and furnish a high-accuracy reference solution for the validation of axisymmetric electrostatic solvers.

2025-12-30T05:09:24Z J. Ricardo de Sousa http://arxiv.org/abs/2512.23590v1 2025-12-29T16:40:28Z

We introduce a new approach to deriving approximate analytical solutions of a harmonic oscillator damped by purely nonlinear, or combinations of linear and nonlinear damping forces. Our approach is based on choosing a suitable trial solution, i.e. an ansatz, which is the product of the time-dependent amplitude and the oscillatory (trigonometric) function that has the same frequency but different initial phase, compared to the undamped case. We derive the equation for the amplitude decay using the connection of the energy dissipation rate with the power of the total damping force and the approximation that the amplitude changes slowly over time compared to the oscillating part of the ansatz. By matching our ansatz to the initial conditions, we obtain the equations for the corresponding initial amplitude and initial phase. Here we demonstrate the validity of our approach in the case of damping quadratic in velocity, Coulomb damping, and a combination of the two, i.e. in this paper we consider purely nonlinear damping, while the dynamics with combinations of damping linear in velocity and nonlinear damping will be analyzed in a follow-up paper. In the case of damping quadratic in velocity, by comparing our approximate analytical solutions with the corresponding numerical solutions, we find that our solutions excellently describe the dynamics of the oscillator in the regime of weak to moderately strong quadratic damping. In the case of Coulomb damping, as well as in the case of a combined Coulomb and quadratic damping, our approximate analytical solutions agree well with the corresponding numerical solutions until the last few half-periods of the motion. Therefore, for these two cases, we introduce improved variants of our approximate solutions which describe the dynamics well until the very end.

2025-12-29T16:40:28Z are welcome. There will be refinements in the next version, but the basic ideas are here Karlo Lelas Robert Pezer http://arxiv.org/abs/2512.23275v1 2025-12-29T07:55:29Z

Two different non-destructive techniques of characterization were coupled to study the mechanical behavior of materials inside a battery during operation: measurement of the deformation of a battery casing by strain gauge and acoustic emission due to the release of mechanical stress inside the battery materials. Experiments were conducted on a commercial Ni-Zn AA-type battery and, particularly, phenomena occurring during overcharge were considered. Beyond the example of this study on a Ni-Zn battery, these two techniques offer complementary information that can be very useful for the monitoring and management of different type of batteries.

2025-12-29T07:55:29Z F Degret LEPMI Sylvain Lespinats LEPMI N Guillet LEPMI M Alias LEPMI P. -X Thivel LEPMI http://arxiv.org/abs/2512.22898v1 2025-12-28T12:07:21Z

In this paper, we introduce "the Schrödinger plate." This is an infinite two-dimensional linear micro-polar elastic medium, with out-of-plane degrees of freedom, lying on a linear elastic foundation of a special kind. Any free motion of the plate can be corresponded to a solution of the two-dimensional Schrödinger equation for a single particle in the external potential field $V$. The specific dependence of the potential $V$ on the position is taken into account in the properties of the plate elastic foundation. The governing equations of the plate are derived as equations of the two-dimensional constraint Cosserat continuum using the direct approach. The plate dynamics can be described by the classical Germain-Lagrange equation for a plate, but the strain energy is different from the one used in the classical Kirchhoff-Love plate theory. Namely, the Schrödinger plate cannot be imagined as a thin elastic body composed of an isotropic linear material. The main property of the Schrödinger plate is as follows: the mechanical energy propagates in the plate exactly in the same way as the probability density propagates according to the corresponding Schrödinger equation.

2025-12-28T12:07:21Z 19 pages Serge N. Gavrilov Anton M. Krivtsov Ekaterina V. Shishkina http://arxiv.org/abs/2412.14319v3 2025-12-26T13:36:13Z

In this note, we define material-uniform hyperelastic bodies (in the sense of Noll) containing discrete disclinations and dislocations, and study their properties. We show in a rigorous way that the size of a disclination is limited by the symmetries of the constitutive relation; in particular, if the symmetry group of the body is discrete, it cannot admit arbitrarily small, yet non-zero, disclinations. We then discuss the application of these observations to the derivations of models of bodies with continuously-distributed defects.

2024-12-18T20:36:14Z Dedicated to Marcelo Epstein, in celebration of his 80th birthday. Version 2: some minor changes in presentation, typos fixed. Version 3: a remark added before Proposition 3.4, some little errors fixed in Example 3.5 Mathematics and Mechanics of Solids, 30(9):2043--2053, 2025 Cy Maor 10.1177/10812865251322412 http://arxiv.org/abs/2310.18514v2 2025-12-24T22:49:19Z

The analysis of cylindrical resonators is part of standard physics curricula but, unlike for their rectangular counterpart, their mode structure is hardly ever visualized. The aim of this work is to show a way of doing it, providing a set of interactive web applications and citing potential use cases in the form of both academic courses and published research. These cover several branches of physics and engineering, showing that these materials can be useful for a broad audience.

2023-10-27T22:12:35Z Eur. J. Phys. 44 065802 (2023) Brais Vila 10.1088/1361-6404/acf5b6 http://arxiv.org/abs/2512.11992v2 2025-12-24T12:04:24Z

The problem of representing laminated structures by an equivalent volume and determining the elastic constants of this equivalent volume from the layer properties is a fundamental issue in the analysis of composite and multilayered systems. In the literature, the most widely used approach for this purpose is the Voigt-type volume-weighted averaging method. Although this method is widely accepted in practice, the uniqueness (as a material characteristic) of the equivalent elastic constants, their independence from the applied loading, and the mathematical conditions under which they can be defined have not been made explicit. This issue is particularly unclear for structures with asymmetric stacking sequences and general anisotropic behavior, including triclinic cases. In this study, a theoretical framework referred to as the Zor model is presented, and it is shown that the elastic constants of the equivalent volume can be obtained only under the action of all in-plane force components (Fx + Fy + Fxy), directly from static equilibrium, linear elasticity, and perfect bonding conditions between the layers. No additional assumptions are introduced in the formulation; reciprocity is not assumed at the system level, but instead emerges naturally as a result of the solution process. The resulting equivalent elastic constants are independent of the applied loading and represent the intrinsic mechanical characteristics of the laminated structure.

2025-12-12T19:16:37Z 12 pages, 3 figures, preprint Mehmet Zor