https://arxiv.org/api/0OyCSYPJ3bE8ArNL1E3RCHQaC+E 2026-06-10T22:08:50Z 9436 300 15 http://arxiv.org/abs/2601.08861v1 2026-01-09T08:37:31Z

Since decades, the CEA has been involved in the development of 4th generation reactors cooled by sodium. The dedicated experimental platform PLATEAU was erected to study the different issues and built a results database for the code validation. As experiments with sodium are complex, the tests are led in mock-ups using water as a simulant fluid. The MICAS mock-up, model of the upper plenum, aims at studying the gas entrainment at the free surface. Gas is prohibited in the reactor core due to neutron effects, which may induce reactivity variations. Since vortices are difficult to handle by numerical codes in complex geometries such as reactor ones, criteria have been developed based on the Rankine vortex model to forecast the air entrainment. However, in some case, numerical results do not correlate the experimental ones and those discrepancies are may be due to the vortex model. This article aims at comparing the vortices characteristics calculated using the Rankine vortex model with experimental results in order to improve the gas entrainment criteria. The parameters of the Rankine model are determined using the velocity fields measured by the Particle Image Velocity (PIV) method and the vortices diameter is calculated using the raw PIV images.

2026-01-09T08:37:31Z 14th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation and Safety, 2024, Vancouver (BC), Canada David Guenadou IRESNE Philippe Aubert IRESNE Jean-Philippe Descamps IRESNE http://arxiv.org/abs/2408.01561v2 2026-01-08T20:41:51Z

In recent years, there has been increasing interest in the understanding and application of nanoparticle assemblies driven by external fields. Although these systems can exhibit marked transitions in behavior compared to non-interacting counterparts, it has often proven challenging to connect their dynamics with underlying physical mechanisms or even to verifiably establish their structure under realistic experimental conditions. We have studied colloidal iron oxide nanoparticles that assemble into ordered, few-particle linear chains under the influence of oscillating and pulsed magnetic fields. In this work, our goal has been to answer the following question: by what physical mechanisms does the magnetic switching of a linear chain evolve from the switching of its constituent particles? Cryo-TEM has been used to flash freeze and image the structures formed by oscillatory drive fields, and magnetic relaxometry has been used to extract the multiple time constants associated with magnetic switching of the short chains. Armed with the physical structure from microscopy and the field-dependent switching times from magnetic measurements, we have conducted extensive micromagnetic simulations, revealing probable physical mechanisms for each time constant regime spanning ~1 microsecond to 1 s in time. These types of magnetic nanomaterials have great potential for biomedical technologies, particularly magnetic particle imaging and hyperthermia, and rigorous elucidation of their physics will hasten their optimization.

2024-08-02T20:17:43Z Thinh Q. Bui Samuel D. Oberdick Frank M. Abel Michael J. Donahue Klaus N. Quelhas Cindi L. Dennis Thomas Cleveland Yanxin Liu Solomon I. Woods http://arxiv.org/abs/2601.04979v1 2026-01-08T14:30:23Z

CEA is involved in the development of the 4 th generation of nuclear reactors, among which are the Sodium Cooled Fast Reactors (SFR). To support their design and safety, specific codes were developed and should be validated using experimental results from relevant mock-ups. Due to the complexity of building a fullsized prototype in the nuclear field, most of the experiments are performed on reduced-sized models but it may lead to scale effects. Such scale effects are under study in this paper, focusing on a critical issue in SFR reactor, which is the rising of the jet outgoing the core at low power. For this purpose, a scale effects methodology is detailed, using the SFR's reduced scale mock-up MICAS as the reference scale. To achieve that, dimensionless Navier-Stokes equations under Boussinesq's approximation are considered and the Vaschy-Buckingham theorem is applied to determine the most relevant dimensionless numbers, among them the densimetric Froude number. Experimental campaigns have been performed to measure velocity fields using the Particle Image Velocimetry (PIV). Their analysis clearly shown dependency of mean pathway of the jet on this dimensionless number. Particularly, plotting the jet angle as a function of the normalized densimetric Froude number, a change of behaviour for a threshold value of 0.45 has been observed. This result also shown negligible effects on the jet rise happening before jet impingement on the Upper Core Structure (UCS).

2026-01-08T14:30:23Z 19th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, 2022, Virtual conference, Belgium B Jourdy IRESNE D Guenadou IRESNE N Seiler IRESNE A Labergue LEMTA M Gradeck LEMTA, LEMTA http://arxiv.org/abs/2601.04970v1 2026-01-08T14:20:10Z

Hydrogen plays an important role in driving decarbonization within the current global energy landscape. As hydrogen infrastructures rapidly expand beyond their traditional applications, there is a need for comprehensive safety practices, solutions, and regulations. Within this framework, the dispersion of hydrogen in enclosed facilities presents a significant safety concern due to its potential for explosive accidents. In this study, hydrogen dispersion in a confined and congested environment (37 m${}^3$ container) is studied using computational fluid dynamics simulations. The experimental setup mirrors previous INERIS investigations, featuring a centrally located hydrogen injection point on the floor with a 20 mm diameter injector and a release rate of 35 g/s, resulting in a Froude number of 650. This yields an inertial jet and a challenging dispersion scenario for numerical prediction. Concentration mapping is carried out by 3 oxygen analyzers distributed throughout the 37 m3 chamber. Comparisons are made between the measured and numerical data to validate the solver used under such conditions. Best practice guidelines are followed, and sensitivity studies involving grid refinement and boundary conditions are conducted to ensure robust simulation results. The findings highlight the model's ability to reproduce the hydrogen concentration distribution for both empty and congested containers and underline the role of accounting for leakages in such scenarios.

2026-01-08T14:20:10Z International Conference for Hydrogen Safety, Sep 2025, Seoul (Korea), South Korea Hector Amino EDF R and D Lynda Porcheron EDF R and D Jérôme Daubech INERIS Emilie Ricrot INERIS Annabelle Brisse INERIS Emmanuel Leprette INERIS Olivier Hurisse EDF R and D http://arxiv.org/abs/2601.04585v1 2026-01-08T04:33:28Z

To gain insights into momentum transfer from the supporting environment, we consider the simple problem of a bullet, fired from below, into a wooden beam resting on two supports. The resulting upward velocity of the beam strongly depends on where the bullet enters the beam; this dependence is due to upward momentum extracted by the beam from its supports. Our simple example illustrates the momentum transfer mechanism exploited in the remarkable dynamics of the chain fountain.

2026-01-08T04:33:28Z 6 pages, 3 figures Xiaoyu Zheng Tianyi Guo Peter Palffy-Muhoray http://arxiv.org/abs/2601.08220v1 2026-01-07T19:33:52Z

The attractive and repulsive linear Hookean form of gravity is known to allow for analytic solutions to N-body systems for arbitrary masses and initial conditions. This linear system is very well suited for use in the advanced undergraduate classroom with the position of every particle rj(t) known analytically in terms of only sine, cosine, and exponential functions. Here it is shown that simple analytic solutions are also possible when linear wind resistance is included, provided that the force due to wind resistance force on each particle is proportional to the mass of that particle. Surprising analytic expressions for the behavior of the system if only a single particle in the system is subject to a linear wind resistance are also presented.

2026-01-07T19:33:52Z 4 pages, 29 equations, 5 references Joseph West http://arxiv.org/abs/2503.13851v3 2026-01-06T11:27:00Z

We investigate the thermodynamic uncertainty relations (TURs) in steady-state transport for a multi-terminal system consisting of two conducting terminals and N-2 probe terminals, within the linear response regime under broken time-reversal symmetry. We independently derive exact bounds on the TURs for the steady-state particle and heat currents under a strong constraint on the Onsager coefficients. Based on our proposed exact bounds, the analysis reveals that the bounds differ for particle and heat currents and are dependent on the system parameters. Furthermore, we demonstrate that under specific parameter conditions, the TURs of the particle and heat currents have a unified minimum value that depends solely on the number of terminals.

2025-03-18T02:52:07Z 15 pages, 3 figures Yanchao Zhang Xinzhi Liu Xiaolong Lü Shanhe Su http://arxiv.org/abs/2512.19768v2 2026-01-06T02:33:59Z

We present a dynamical framework for modeling the motion of point-like charged particles, with or without mass, in general external electromagnetic fields. A key feature of this formulation is the treatment of time coordinate as a dynamical variable. The framework applies to the relativistic regime while consistently admitting a nonrelativistic limit. We also introduce a representation of particle trajectories in velocity space, which provides clear insight into the nature and asymptotic behavior of the dynamics. As an application, we compare the motion of massive and massless particles in a constant electromagnetic field and find that, for identical field configurations, their asymptotic behavior is independent of both mass and initial conditions. Finally, we explore the computational advantages of the dynamical-time formulation over the conventional uniform-time approach in two case studies: a uniform electromagnetic field, and an elliptically polarized wave propagating along a uniform magnetic field. In both scenarios, the proposed scheme exhibits improvements in accuracy and computational efficiency.

2025-12-22T02:59:12Z 11 pages, 4 figures. Version v2: Concluding remarks rewritten; minor notational changes; one additional reference Zui Oporto Gonzalo Marcelo Ramírez-Ávila http://arxiv.org/abs/2601.02338v1 2026-01-05T18:33:41Z

In the merry-go-round fictitious forces are acting like centrifugal force and Coriolis force. Like the Lorentz force Coriolis force is velocity dependent and, following Arnold, can be modeled by twisting the symplectic form. If the merry-go-round is accelerated an additional fictitious force shows up, the Euler force. In this article we explain how one deals symplectically with the Euler force by considering time-dependent symplectic forms. It will turn out that to treat the Euler force one also needs time-dependent primitives of the time-dependent symplectic forms.

2026-01-05T18:33:41Z 17 pages, 1 figure Urs Frauenfelder Joa Weber http://arxiv.org/abs/2601.02169v1 2026-01-05T14:46:45Z

We consider here several aspects of the following challenging question: is it possible to use a passive cloak to make invisible a dielectric inclusion on a finite frequency interval in the quasistatic regime of Maxwell's equations for an observer close to the object? In this work, by considering the Dirichlet-to-Neumann (DtN) map, we not only answer negatively this question, but we go further and provide some quantitative bounds on this map that provide fundamental limits to both cloaking as well as approximate cloaking. These bounds involve the following physical parameters: the length and center of the frequency interval, the volume of the cloaking device, the volume of the obstacle, and the relative permittivity of the object. Our approach is based on two key tools: i) variational principles from the abstract theory of composites and ii) the analytic approach to deriving bounds from sum rules for passive systems. To use i), we prove a new representation theorem for the DtN map which allows us to interpret this map as an effective operator in the abstract theory of composites. One important consequence of this representation is that it allows one to incorporate the broad and deep results from the theory of composites, such as variational principles, and to apply the bounds derived from them to the DtN map. These results could be useful in other contexts other than cloaking. Next, to use ii), we show that the passivity assumption allows us to connect the DtN map (as function of the frequency) with two important classes of analytic functions, namely, Herglotz and Stieltjes functions. The sum rules for these functions, combined with the variational approach, allows us to derive new inequalities on the DtN map which impose fundamental limitations on passive cloaking, both exact and approximate, over a frequency interval. We consider both cases of lossy and lossless cloaks.

2026-01-05T14:46:45Z 72 pages, 3 figures Maxence Cassier Graeme W. Milton Aaron Welters http://arxiv.org/abs/2501.18604v2 2026-01-05T11:52:52Z

We analytically solve Poisson's equation for the magnetic scalar potential generated by a uniformly magnetized rectangular prism and determine a closed-form solution for the magnetic scalar potential given only in terms of arctan and natural logarithmic functions. We show that the magnetic scalar potential can be written as a demagnetization vector, containing all the geometric information, multiplied with the magnetization, analogous to demagnetization tensors. We validate the derived analytical expression for the magnetic scalar potential by comparing with a finite element simulation and show that these agree perfectly. We finally extend the concept of the demagnetization vector and tensor, which contains the geometric information for the source generating the potential, to gravitational objects.

2025-01-19T13:19:08Z 7 pages, 2 figures IEEE Transactions on Magnetics, 62, 7000206, 2026 Berian James Stefan Pollok Jes Frellsen Rasmus Bjørk 10.1109/TMAG.2025.3632626 http://arxiv.org/abs/2601.01981v1 2026-01-05T10:35:45Z

The register tube marks the invention of the clarinet in the early eighteenth century, tripling the range of its ancestor, the chalumeau, and giving it the widest range among wind instruments. Opening this narrow tube causes the fundamental frequency of the played note to increase by a factor of three, from the first to the second register of the resonator. The geometry and location of the register hole condition not only this mode selection mechanism, but also the global tuning of the second register. However, existing self-sustained nonlinear models of reed instruments fail to predict whether a register transition can occur, limiting optimization of the register hole geometry. Here, we introduce a sparse self-oscillating clarinet model that includes localized nonlinear acoustic losses in the register hole. This nonlinear mechanism is shown to be necessary to reproduce register transitions observed experimentally. Using systematic exploration of the control and design parameter spaces, we identify combinations of register hole diameter, position, and chimney length that ensure reliable register transitions. We show that the competing demands of playability and tuning are only satisfied by a long and narrow tube. Our findings provide a predictive tool for instrument making, assisting manufacturers in refining clarinets as well as other reed instruments, including oboes, bassoons, and saxophones.

2026-01-05T10:35:45Z Nathan Szwarcberg LMA Tom Colinot LMA Christophe Vergez LMA Michaël Jousserand http://arxiv.org/abs/2506.03875v3 2026-01-05T10:30:09Z

When playing the clarinet, opening the register hole allows for a transition from the first to the second register, producing a twelfth interval. On an artificial player system, the blowing pressure range where the second register remains stable can be determined by gradually varying the blowing pressure while keeping the register hole open. However, when the register hole is opened while the instrument is already producing the first register, the range of blowing pressures that lead to a stable second register is narrower than the full stability zone of the second register. This phenomenon is investigated numerically by performing multiple hole openings at different times, for various values of the blowing pressure and the embouchure parameter. In some narrow regions of the control parameters space, the success of a register transition depends on the phase at which the hole is opened. This illustrates an instance of phase-tipping, where the limit cycle of the closed-hole regime may intersect multiple basins of attraction associated with the open-hole regimes. Furthermore, to assess the robustness of the basins of attraction, random noise is introduced to the control parameters before the register hole is opened. Results indicate that the equilibrium regime is more robust to noise than the other oscillating regimes. Finally, long-lasting transient quasiperiodics are investigated. The phase at which the hole is opened influences both the transient duration and the resulting stable regime.

2025-06-04T12:09:03Z Nathan Szwarcberg LMA Tom Colinot LMA Christophe Vergez LMA Michael Jousserand LMA Léonie Maignan LMA Anthia Patsinakidou LMA Giordano Gatti LMA Hrant Arzumanyan LMA P. F. Oliveira Morais LMA http://arxiv.org/abs/2301.09355v4 2026-01-05T00:25:27Z

We formulate and study a generalized virial theorem for contact Hamiltonian systems. Such systems describe mechanical systems in the presence of simple dissipative forces such as Rayleigh friction, or the vertical motion of a particle falling through a fluid (quadratic drag) under the action of constant gravity. We find a generalized virial theorem for contact Hamiltonian systems which is distinct from that obtained earlier for the symplectic case. The `contact' generalized virial theorem is shown to reduce to the earlier result on symplectic manifolds as a special case. Various examples of dissipative mechanical systems are discussed. We also formulate a generalized virial theorem in the contact Lagrangian framework.

2023-01-23T10:47:38Z v1: Preliminary version; v2: Revised version, references added; v3: Minor changes; v4: This version corrects typos, notational issues, minor technical errors, and references, and adds clarifying remarks J. Phys. A: Math. Theor. 56, 235205 (2023) Aritra Ghosh 10.1088/1751-8121/accfd3 http://arxiv.org/abs/2410.08167v3 2026-01-05T00:22:16Z

Hamiltonian dynamics describing conservative systems naturally preserves the standard notion of phase-space volume, a result known as the Liouville's theorem which is central to the formulation of classical statistical mechanics. In this paper, we obtain explicit expressions for invariant phase-space measures for certain (generally dissipative) mechanical systems, namely, systems described by conformal vector fields on symplectic manifolds that are cotangent bundles, contact Hamiltonian systems, and systems of the Liénard class. The latter class of systems can be described by certain generalized conformal vector fields on the cotangent bundle of the configuration space. The computation of the invariant measures is achieved by making use of the formalism of Jacobi last multipliers.

2024-10-10T17:44:52Z v1: Preliminary version; v2: Improved version with some errors corrected; v3: This version corrects some typos and includes a minor modification to Definition 4.1 Phys. Scr. 100, 035220 (2025) Aritra Ghosh 10.1088/1402-4896/adb10b