https://arxiv.org/api/6fUzOCms0YsYjpvSUG1sgUM3OcE 2026-06-13T11:01:24Z 9441 30 15 http://arxiv.org/abs/2602.03670v2 2026-06-01T15:49:57Z

Equilibrium Propagation (EP) is a physics-inspired learning algorithm that uses stationary states of a dynamical system both for inference and learning. In its original formulation it is limited to conservative systems, $\textit{i.e.}$ to dynamics which derive from an energy function. Given their applications, it is important to extend EP to non-conservative systems, $\textit{i.e.}$ systems with non-reciprocal interactions. Previous attempts to generalize EP to such systems failed to compute the exact gradient of the cost function. Here we propose a framework that extends EP to arbitrary non-conservative systems, including feedforward networks. We keep the key property of equilibrium propagation, namely the use of stationary states both for inference and learning. However, we modify the dynamics in the learning phase by a term proportional to the non-reciprocal part of the interaction so as to obtain the exact gradient of the cost function. This algorithm can also be derived using a variational formulation that generates the learning dynamics through an energy function defined over an augmented state space. Numerical experiments show that this algorithm achieves better performance and learns faster than previous proposals.

2026-02-03T15:52:23Z 23 pages Antonino Emanuele Scurria Dimitri Vanden Abeele Bortolo Matteo Mognetti Serge Massar http://arxiv.org/abs/2606.00681v1 2026-05-30T11:37:50Z

Quartz tuning forks, functioning as electrically driven piezoelectric resonators, have long served as exceptionally stable and widely adopted timing references in diverse domains of research and industry. Yet, electrically measured resonance spectra often exhibit robust features that remain unexplained within existing theoretical descriptions. Here we develop a unified continuum electroelastic framework that combines piezoelectric electrodynamics, variational structural dynamics, and symmetry-selected electromechanical observability. Such a first-principles theory shows quantitative agreement with experimental results, which demonstrates electrical observability emerges not just from the underlying mechanical eigenmodes alone. Our results provide a unified framework for electrically driven piezoelectric resonators as well as a rigorous basis for precision electromechanical characterization.

2026-05-30T11:37:50Z 5 pages, 1 figure Hankyul Koh Wonho Jhe http://arxiv.org/abs/2606.00626v1 2026-05-30T09:00:25Z

Surface roughness evolves during sliding, a process known as run-in, and the resulting topography controls friction, leakage, and failure from machines to geological faults. Yet the physical rule selecting this state remains unclear. We show that metals, rocks, and glasses develop universal self-similar roughness at short wavelengths, while retaining a material-dependent roll-off. A two-process model explains this behavior: junction formation and rupture drive universal roughening, whereas larger-scale deformation and/or fracture limit its growth.

2026-05-30T09:00:25Z Ruibin Xu Haohao Ren Adriane Clerc Guilhem Mollon Wenbo Sheng Feng Zhou B. N. J. Persson http://arxiv.org/abs/2606.00521v1 2026-05-30T04:29:38Z

The relativistic transformation of temperature has long remained controversial, with the classical laws of Planck-Einstein, Ott-Eddington-Moller and Landsberg yielding conflicting results. We reexamine this issue from a relativistic thermodynamic and statistical perspective, starting from the energy-momentum tensor of an isotropic system and defining the effective temperature Teff as that inferred by a moving observer from the transformed energy density. Analyses of a photon gas, a relativistic ideal gas and an electron gas show that Teff consistently increases with velocity, supporting the Ott-Eddington interpretation while depending on the system's equation of state. These results indicate that temperature is not a Lorentz-invariant scalar but an observer-dependent quantity. A consistent relativistic description emerges when temperature is related to the inverse-temperature four-vector beta, linking operational and invariant viewpoints within a unified thermodynamic framework.

2026-05-30T04:29:38Z 16 pages, 2 figures, to appear in PLA Phys. Lett. A 590 (2026) 131860 Soroor Pouryazdan Babak Vakili 10.1016/j.physleta.2026.131860 http://arxiv.org/abs/2510.14769v2 2026-05-29T16:18:03Z

Solid interfaces resist sliding up to a threshold shear force, called static friction, beyond which they start moving and their resistance drops to the kinetic friction. Static friction at rough interfaces has long been described empirically using system-specific coefficients tabulated in engineering handbooks. Here, through nanometer-resolution sliding experiments, we show that it is set by a friction overshoot during the onset of sliding. We demonstrate that this overshoot originates from the collective configurational evolution of surface asperities under shear, and derive a minimal differential equation governing this evolution. Our theory predicts that such overshoots generically emerge when an athermal frictional system evolves smoothly toward a unique steady-state kinetic friction. These results show that static friction is not an intrinsic material property, but an emergent consequence of collective asperity dynamics.

2025-10-16T15:05:49Z Kasra Farain Daniel Bonn http://arxiv.org/abs/2606.00142v1 2026-05-29T01:49:01Z

This article examines finite-time relativistic deceleration and its energy balance within the Lorentz-Abraham-Dirac equation, with special attention to boundary Schott-energy terms. From experimental and kinematical viewpoints, deceleration differs from acceleration. Proper accelerations or decelerations relevant to Unruh-effect observations may be more naturally realized in deceleration than in comparable acceleration scenarios. Deceleration from finite initial energy to rest can occur only over a finite time interval, unlike idealized acceleration, which can continue indefinitely. Thus, finite acceleration or deceleration must include boundary transitions in the radiation-energy balance. We first obtain expressions for the time and distance required for a relativistic particle with nonzero initial velocity to stop under constant deceleration. Applied to the Lynch-Cohen-Hadad-Kaminer (LCHK) estimate, they show that the quoted extremely large deceleration cannot represent sustained classical uniform proper deceleration over a macroscopic crystal length. The stopping time and distance would be too small, and the upper bound on sustained deceleration is far below that estimate. We next consider a charged particle entering and leaving a uniform acceleration or deceleration interval without a velocity jump. This motion can be described within the LAD equation if the external force includes impulses during the short transitions between inertial and uniformly accelerated or decelerated motion. External work is not locally converted directly into radiation during the uniform segment. The Schott energy acts instead as an intermediate reservoir: it changes during the transitions and supplies the radiated energy during the subsequent uniform interval. This idealized LAD radiation mechanism is absent from the Lorentz-equation description and from LAD descriptions that neglect boundary conditions.

2026-05-29T01:49:01Z Yefim S. Levin http://arxiv.org/abs/2602.12447v2 2026-05-29T00:31:14Z

In this work, a convergent low-temperature cluster expansion of the one-dimensional long-range ferromagnetic Ising model with polynomial decay $α\in (1,2]$ is developed; that is, $J(r)=r^{-α}$. As an application, the $n$-point correlations are studied and the two-point correlation is shown to be algebraic with rate of decay exactly $α$.

2026-02-12T22:11:52Z 58 pages, 15 figures, preliminary version, comments are welcome Rodrigo Bissacot Henrique Corsini http://arxiv.org/abs/2605.30624v1 2026-05-28T22:19:08Z

In a first-year physics inquiry lab, pairs of students were randomly assigned to study pendulum motion using either a physical apparatus or a computer simulation. The experiment required detecting a ~1% difference in period between pendulums released at 10$^\circ$ and 20$^\circ$. This is the subtle failure of the small angle approximation and a goal that demands iteratively refined, high-precision measurements. Students using the simulation achieved significantly more reproducible timing measurements across all rounds of data collection and, by the third round, had also adopted more effective data collection strategies overall. As a result, 78% of simulation groups met the precision threshold required to identify the model failure, compared with 52% of physical apparatus groups. We attribute these outcomes primarily to a specific simulation constraint: students were required to use the simulation's built-in timer, which forced them to decouple pendulum release from the start of timing. This prevented students from pursuing a reaction-time-limited synchronization strategy that often traps users of physical apparatus in a low-precision measurement dead end. A post-lab survey further shows that students using simulations were more confident in their results than those who instead used a physical pendulum, as well as preferred greater use of simulations in future labs. These findings suggest that carefully designed simulation constraints can guide students toward productive experimental strategies while preserving their investigative autonomy.

2026-05-28T22:19:08Z 24 pages, 4 figures Jeff Bale James Day J. Ives D. A. Bonn http://arxiv.org/abs/2606.11229v1 2026-05-28T18:16:05Z

Thermomagnetic generators (TMGs) are devices that convert waste heat to electricity through a change in magnetization of a solid material. This causes a changing flux through a coil, which induces an electromotive force per Faraday's law. However, the influence of the coil on the performance of the TMG has not been investigated and existing TMG prototypes merely utilize some coil, not the optimal coil for a given device. In this work we present an analytical and numerical model of a TMG that calculates power by explicitly coupling the TMGs magnetic and electric circuits and use this to analyze the influence of the coil on the TMG performance. We show that analytically TMG power has a linear dependence on coil volume, independent of the specific combination of wire radius and coil turns. The model is validated with experimental data, and finally used to study prototype TMGs presented in literature, where we show that the power of these literature TMGs can be increased by a factor of 10-400 times, had larger coils been used in the prototypes.

2026-05-28T18:16:05Z 12 pages, 6 figures Aske Chris Nilsson Andrea Roberto Insinga Salvatore De Angelis Georgios Potsios Rasmus Bjørk http://arxiv.org/abs/2508.10742v4 2026-05-28T11:47:29Z

Recent experiments [Guan et al. Science 381, 766 (2023)] have demonstrated that the resolution of superlensing slabs can be significantly enhanced with complex frequency illuminations. In this study, we introduce a novel theoretical framework for analyzing electromagnetic superlensing. The framework offers new and transparent insights. It helps clarify what resolution can be expected with complex frequency, or more generally, pulse illuminations, but it also highlights inherent limitations and tempers high expectations raised by recent electromagnetic experiments in the infrared. [accepted Optica]

2025-08-14T15:28:02Z 5 pages + Supp Mat Philippe Lalanne Tong Wu http://arxiv.org/abs/2605.29261v1 2026-05-28T02:26:04Z

Asymptotic analysis provides powerful insights into physical systems by examining their behavior in limiting cases. This paper explores how extending this advanced methodology to high school physics education can deepen conceptual understanding of fundamental topics. Through two carefully selected case studies -- multi-ball collisions and internal resistance in circuits -- we demonstrate how asymptotic approaches offer: Intuitive physical interpretations beyond standard derivations Resolution of conceptual paradoxes through limit analysis Connections between elementary and advanced physics concepts. Our analysis reveals that asymptotic methods help students develop stronger physical intuition while preparing them for more advanced studies. By examining boundary behaviors in collision dynamics and circuit theory, we show how these techniques transform abstract equations into tangible physical understanding, suggesting valuable applications across the high school physics curriculum.

2026-05-28T02:26:04Z 8 pages, for delivering mathematical physics in high school Kyle Kou Yuchang Paul Zhang Yixing Victor Wang Shuang http://arxiv.org/abs/2605.28996v1 2026-05-27T18:53:15Z

We consider systems characterized by the presence of a rapidly oscillating force. A general method is presented for the construction of the effective action governing the large-scale nonlinear dynamics of such systems order by order in inverse powers of the oscillation frequency $ω$. The explicit expression for the effective Lagrangian is derived up to ${\cal O}(1/ω^6)$ next-to-next-to-leading approximation. The general structure of the high-frequency expansion reveals a broad class of nonlinear systems whose transition curves are identical to those of the linear Mathieu equation, which enables a fully nonperturbative stability analysis in the case of strong driving and nonlinearity. The method is generalized to velocity-dependent forces and configuration space with curvature, characteristic to systems with constraints. Several applications are discussed in detail, including the dynamical magnetic trapping of electric charges.

2026-05-27T18:53:15Z 15 pages, 6 figures Afshin Besharat Alexander A. Penin http://arxiv.org/abs/2605.28382v1 2026-05-27T12:21:06Z

Asymptotic methods are used to derive a geometrically nonlinear beam model for thermoelastic solids with a spatially localised heat source. The asymptotic reduction is based on collapsing the heated region to a point. Away from the point of heating, the governing equations reduce to a pair of beam equations with nonlinear von Kármán strains. The effects of the localised heat source are captured through asymptotically consistent jump conditions that hold at the point of heating. The model accounts for changes in beam length due to longitudinal thermal expansion and bending moments produced by transverse thermal gradients. The model is used to study light-induced actuation of photoresponsive hydrogel beams with localised heating arising from laser irradiation. Two loading scenarios are considered. In the first, the ends of the beam are assumed to be free, resulting in a V-shaped deformation upon heating. An analytical expression for the fold angle of the V is provided. In the second, the beam is assumed to be in a pre-buckled configuration due to clamped end conditions. The critical conditions leading to light-driven snap-through are calculated. Offsetting the laser from the mid-point of the beam is found to inhibit the onset of snap through.

2026-05-27T12:21:06Z William T. Simpkins Matteo Taffetani Matthew G. Hennessy http://arxiv.org/abs/2605.28177v1 2026-05-27T08:59:47Z

Adiabaticity is a key concept in physics, but its applications in mechanical and control engineering remain underexplored. Adiabatic invariants ensure robust dynamics under slow changes, but they impose impractical time limitations. Shortcuts to Adiabaticity (STA) overcome these limitations by enabling fast operations with minimal final excitations. In this work, we set a STA strategy based on dynamical invariants and inverse engineering to design the trajectory of a cart-pole, a system characterized by its instability and repulsive potential. The trajectories found guarantee a balanced transport of the cart-pole within the small oscillations regime. The results are compared to numerical simulations with the exact non-linear model to set the working domain of the designed protocol.

2026-05-27T08:59:47Z 11 pages, 5 figures Mathematics 2025, 13, 1220 I. Lizuain A. Tobalina A. Rodriguez-Prieto 10.3390/math13081220 http://arxiv.org/abs/2404.01346v5 2026-05-26T18:52:09Z

This paper resolves a persistent ambiguity regarding the covariant formulation of electrodynamics in a vacuum, as well as of Minkowski's electrodynamics of moving isotropic media. By analyzing a recent debate, we demonstrate that current interpretations misrepresent the relationships between the electromagnetic four-vector potential, gauge conditions, and field tensors. We specifically challenge the notion that the geometric status of $A^μ$ as a four-vector is contingent upon the choice of gauge. We trace these inconsistencies back to potentially misleading treatments of the four-vector potential in the classic texts of Moller, Landau and Lifshitz, Jackson and Griffiths. Beyond correcting the speciic conceptual errors in the recent literature, this work clarifies the theoretical framework for ensuring the electromagnetic potential remains consistent with gauge invariance and the principle of relativity in macroscopic isotropic media.

2024-03-31T12:37:22Z 10 pages, the abstract has been modified. In Section 2, a paragraph is added discussing the potentially misleading treatments of the electromagnetic 4-vector potential in the classic texts of Moller, Landau and Lifshitz, Jackson, and Griffiths D V Redžić