https://arxiv.org/api/Cz75kuOaTTXLPLmjlq0F0yxXeI8 2026-04-09T13:57:14Z 9338 240 15 http://arxiv.org/abs/2512.05575v1 2025-12-05T09:55:46Z

Two-dimensional architected materials are often realized as periodic grids of elastic beams. Conventional homogenization methods represent these structures as equivalent elastic solids but neglect shear deformation in the constituent beams. This article addresses this limitation by incorporating shear deformability through Timoshenko beam theory, enabling accurate modeling of stubby beams. Moreover, shearable beams with extreme mechanical characteristics can be obtained through the design of appropriate microstructures. Introducing shearable beams into the grid expands the design space, allowing, for instance, the control of the effective Poisson's ratio beyond the limits achievable with slender beams.

2025-12-05T09:55:46Z 32 pages, 30 figures International Journal of Engineering Science 218 (2026) 104397 Matteo Franzoi Davide Bigoni Andrea Piccolroaz 10.1016/j.ijengsci.2025.104397 http://arxiv.org/abs/2512.05165v1 2025-12-04T12:51:34Z

We introduce a method for effectively identifying bound states in the continuum (BICs) - notably without computing the imaginary part of the eigenvalues - thereby simplifying the modeling and potentially reducing computation time. In real, open, physical systems, wave decay must be taken into account. This phenomenon is captured by complex-valued solutions of the harmonic wave equation, the so-called quasi-normal modes (QNMs). BICs, however, constitute a limiting class of solutions that do not radiate energy to infinity and are therefore, by their very nature, insensitive to the region surrounding the physical structure. Building on this observation, we identify BICs by varying the external boundary conditions that close the computational domain; the resulting behavior is displayed in the form of spectral histograms. We demonstrate the effectiveness of this procedure by comparing it with conventional QNM analysis employing perfectly matched layers. Two representative examples are considered: a periodic system of permeable inclusions supporting guided Rayleigh-Bloch waves, and a whispering-gallery resonator constructed from this configuration. Finally, we provide a mathematical explanation for the method's validity by deriving integral reciprocity statements.

2025-12-04T12:51:34Z Vincent Laude David Röhlig http://arxiv.org/abs/2512.04600v1 2025-12-04T09:21:35Z

Stellar streams offer one of the most sensitive probes of the Milky Way`s gravitational potential, as their phase-space morphology encodes both the tidal field of the host galaxy and the internal structure of their progenitors. In this work, we introduce a framework that leverages Flow Matching and Simulation-Based Inference (SBI) to jointly infer the parameters of the GD-1 progenitor and the global properties of the Milky Way potential. Our aim is to move beyond traditional techniques (e.g. orbit-fitting and action-angle methods) by constructing a fully Bayesian, likelihood-free posterior over both host-galaxy parameters and progenitor properties, thereby capturing the intrinsic coupling between tidal stripping dynamics and the underlying potential. To achieve this, we generate a large suite of mock GD-1-like streams using our differentiable N-body code \textsc{\texttt{Odisseo}}, sampling self-consistent initial conditions from a Plummer sphere and evolving them in a flexible Milky Way potential model. We then apply conditional Flow Matching to learn the vector field that transports a base Gaussian distribution into the posterior, enabling efficient, amortized inference directly from stream phase-space data. We demonstrate that our method successfully recovers the true parameters of a fiducial GD-1 simulation, producing well-calibrated posteriors and accurately reproducing parameter degeneracies arising from progenitor-host interactions. Flow Matching provides a powerful, flexible framework for Galactic Archaeology. Our approach enables joint inference on progenitor and Galactic parameters, capturing complex dependencies that are difficult to model with classical likelihood-based methods.

2025-12-04T09:21:35Z submitted to A&A, comments welcome, all source code to reproduce this work can be found on GitHub under the url: https://github.com/vepe99/sbi-sim/tree/odisseo_branch . The simulator \textsc{\texttt{Odisseo}} is available on GitHub at the following url: https://github.com/vepe99/Odisseo A&A 707, A363 (2026) Giuseppe Viterbo Tobias Buck 10.1051/0004-6361/202558358 http://arxiv.org/abs/2512.02591v1 2025-12-02T10:01:35Z

Sintering of printed porcelain filaments can be strongly affected by overhang geometry, thin features, and printing-induced anisotropy. These effects are particularly difficult to simulate because they require accurately capturing the interplay between sintering kinetics, viscous deformation, and macroscopic anisotropy. In this study, a robust and predictive model is established experimentally using anisotropic sintering dilatometry combined with overhang-deformation calibration through finite element simulations (FEM). The sintering behavior is identified using a porosity-temperature-independent minimization strategy applied to multi-rate dilatometry. Pellet anisotropy is incorporated via FEM by imposing directional sintering stresses. The deformation behavior is then calibrated by adjusting the shear viscosity to match overhang shapes deformation. The resulting model is finally validated on overhanging bar geometries. This step-by-step approach provides a comprehensive assessment of porcelain sintering while accurately capturing deformation mechanisms.

2025-12-02T10:01:35Z Journal of Materials Research and Technology, 2025 Fatima Hammoud CRISMAT Charles Manière CRISMAT http://arxiv.org/abs/2512.02586v1 2025-12-02T09:59:11Z

Indoor swimming pools (ISPs) consume significant amounts of electrical and thermal energy to ensure the heating of water and air, ventilation, and maintaining adequate humidity levels. This is measured in GWh per year for large installations, such as Olympic swimming pools (SPs). In this paper, the problem is initially addressed using a phenomenological approach at steady state of the air-water coupling, based on a real case study. The aim is to identify the key phenomena and the constraints that are the most sensitive, including those related to water and air quality management. A key action lever is found in evaporation, and more specifically, water temperature and the indoor dewpoint temperature, which act as its precursors. In a second step, two different strategies were tested to reduce energy consumption for water heating. It was determined that a strategy which incorporates night setback in conjunction with a precise restart time yields a maximum gain of 4%. The second strategy aims to enhance the energy recovery of thermal solar panels by enabling slight overheating of the pool. Its large volume provides effective energy storage, with estimated energy savings of up to 17% for a 1___ C overheating. This strategy appears to be a viable option, as it is straightforward to implement. However, the impact of water overheating on the energy consumption of AHU still needs to be analyzed and managed.

2025-12-02T09:59:11Z Solar Energy, 2026, 303, pp.114107 Younes Benakcha LMDC Matthieu Labat LMDC Ion Hazyuk ICA Stéphane Ginestet LMDC http://arxiv.org/abs/2510.16000v2 2025-12-01T16:16:34Z

Nanometric layer thickness imaging is crucial for fundamental research and characterization of micro fabricated devices. Here, we assess the potential of a non-contact opto-acoustic frequency domain laser ultrasound (FreDomLUS) microscopy technique for imaging nanometric thickness variations via GHz zero-group velocity (ZGV) elastic plate resonances. The method exploits the ZGV's lateral energy confinement that leads to sharp resonance peaks which can be effectively probed with the FreDomLUS technique at GHz acoustic frequencies. For demonstration purposes we introduced sub-10 nm height variation patterns in the topmost layer of solidly mounted bulk-acoustic wave resonators with a design frequency of around 1.7 GHz. They are raster-scanned to retrieve ZGV-frequencies from local acoustic spectra as a contrast quantity for imaging. We show how to retrieve quantitative height information by numerically calibrating the factor which inversely relates ZGV frequency change with the layer thickness change. Height variations in stacks with nominal thickness changes of 8 nm, 4 nm, and 1 nm can be resolved and indicate sub-nanometer depth resolution capabilities. The lateral resolution is studied by measuring the method's step edge function and it is found to be in the micrometer range. Atomic force microscopy imaging is used to validate the results.

2025-10-14T09:32:36Z Updated layout and acknowledgements Martin Ryzy Guqi Yan István Veres Thomas Berer Ivan Alić Clemens Grünsteidl Georg Watzl Georg Gramse Susanne Kreuzer http://arxiv.org/abs/2512.05997v1 2025-12-01T14:44:01Z

In 1857, Kirchhoff published two seminal papers on the motion of electricity in wires. In that work, he was the first to derive what we now call the telegrapher`s equations, which describes the propagation of electromagnetic signals along a cable at the speed of light, in some conditions. How was Kirchhoff able to describe electromagnetic propagation as early as 1857, when the notion of displacement current which is believed to be the essential ingredient for the propagation of electric and magnetic fields was not introduced by Maxwell until 1861 and fully explained later in 1865? In this paper, we show that Kirchhoff was the first, in his 1857 paper, to introduce the continuity equation when discussing electromagnetic propagation. We argue that the continuity equation used by Kirchhoff is a more fundamental concept now as it was in 1865 than displacement current. In our view, the dynamics of charged particles can be formulated without invoking fields, but the dynamics of fields cannot be formulated without a continuity equation describing the properties of matter.

2025-12-01T14:44:01Z Xavier Oriols Robert Eisenberg David K. Ferry http://arxiv.org/abs/2512.01521v1 2025-12-01T10:45:52Z

The present work explores the suitability of Al-Cu-Si ternary alloys as hightemperature metallic phase change materials (PCMs) for thermal energy storage systems (TESS) operating between 550__C and 850__C. While prior research has primarily focused on thermodynamic modeling or thermal property characterization below 600{\textdegree}C, this work provides a comprehensive experimental assessment of selected invariant compositions within the Al-Cu-Si system. CALPHAD calculations were performed using FactSage 8.2 software (SGTE and FTLite database) to guide alloy selection, followed by synthesis and detailed characterization of melting point, latent heat, specific heat, thermal diffusivity, and thermal conductivity. Critically, the thermal reliability of these materials was evaluated under repeated solid-liquid cycling up to 100 cycles in oxidizing atmospheres, revealing their stability and degradation profiles. Additionally, dilatometry and density analysis were conducted to provide an in-depth understanding of the alloys and practical properties for end users. Among the tested alloys, several demonstrated high volumetric energy densities (over 500 kWh/m${}^3$ for a temperature difference of 300{\textdegree}C) and good thermal durability, establishing Al-Cu-Si alloys as promising PCM candidates for industrial-scale high-temperature energy storage applications. This study fills a notable gap in the literature by combining phase selection, comprehensive thermophysical property evaluation, and long-term cycling analysis above 600{\textdegree}C.

2025-12-01T10:45:52Z Journal of Energy Storage, 2026, 143, pp.119635 Laura Teodorescu LITEN / CEA-DES, DTCH {Á}ngel Serrano BRTA Kyran Williamson BRTA Cristina Luengo BRTA Artem Nikulin BRTA Elena Palomo del Barrio LITEN / CEA-DES, UGA Grégory Largiller LITEN / CEA-DES, UGA http://arxiv.org/abs/2410.11343v2 2025-12-01T10:15:06Z

A six-dimensional reversible normal form system occurs in B{é}nard-Rayleigh convection between parallel planes, when we look for domain walls intersecting orthogonally (see Buffoni et al [1]). On the truncated system, we prove analytically the existence, local uniqueness, and analyticity in parameters, of a heteroclinic connection between two equilibria, each corresponding to a system of convective rolls. We prove that the 3-dimensional unstable manifold of one equilibrium, intersects transversally the 3-dimensional stable manifold of the other equilibrium, both manifolds lying on a 5-dimensional invariant manifold. We also study the linearized operator along the heteroclinic, allowing to prove (in [9]) the persistence under reversible perturbation, of the heteroclinic obtained in [1].

2024-10-15T07:18:20Z Gérard Iooss LJAD, IUF http://arxiv.org/abs/2512.01445v1 2025-12-01T09:28:53Z

We derive a linear model of navigation in a two-layer fluid with a variable velocity of the ship. A spectral version of the model including a Rayleigh damping term is analyzed. We prove that the Cauchy problem has a unique solution if the velocity and if the initial data are sufficiently regular. The case of a constant speed is thoroughly investigated and the importance of a critical speed which separates two types of regimes is pointed out. We propose a numerical scheme based on the discrete Fourier transform for the space discretization and on an exponential integrator for the time discretization. We prove an error estimate for the exponential integrator. Numerical experiments in one and two space dimensions complete the theoretical results.

2025-12-01T09:28:53Z Collections interdisciplinaire Zeina Rammal LMA [Poitiers] Matthieu Brachet LMA [Poitiers] Germain Rousseaux PPrime [Poitiers] Morgan Pierre LMA [Poitiers] http://arxiv.org/abs/2512.00458v1 2025-11-29T12:21:22Z

The method of image charges is a powerful and elegant technique in electrostatics, commonly used to determine the electric field generated by point charges near conductors of various shapes. While standard problems focus on single charges interacting with conductors, the behavior of multipoles in such configurations has received comparatively less attention, particularly beyond the well-studied case of a flat plane. In this paper, we explore the image formation of electric dipoles and quadrupoles near a conducting sphere and uncover a wonderful result: the image of a given multipole is not necessarily of the same type. Instead, alongside the expected multipole image, the resulting image configuration also includes lower-order multipole contributions. This finding broadens the understanding of electrostatic images and offers new insights into the interaction of multipoles with conducting boundaries.

2025-11-29T12:21:22Z 22 pages Farhang Loran Saman Moghimi-Araghi 10.1088/1361-6404/ae21a3 http://arxiv.org/abs/2512.08958v1 2025-11-28T11:56:26Z

We present a simple variational framework for planar elastica that enables distributed energies, such as gravitational loading or magnetic body torques, to be incorporated in a modular and unified manner. The formulation is based on expressing all load induced contributions directly at the level of the energy functional, which avoids the force balance constructions used in classical treatments such as Wang (1986) and makes the inclusion of additional physical effects straightforward. The resulting planar energy functional yields compact governing equations in which the contributions of individual load types remain clearly separated. We demonstrate that the framework reproduces the classical heavy elastica equations exactly and naturally accommodates magnetic energy terms commonly used in hard magnetic rod models. Although mathematically elementary, the formulation provides a clean and extensible structure for describing planar rod deformations under general distributed loads.

2025-11-28T11:56:26Z 8 pages, 1 figure Yimu Mao Christopher Tropp http://arxiv.org/abs/2511.22431v1 2025-11-27T13:12:16Z

We investigate the non-equilibrium four-vector work in an expanding relativistic piston. By deriving the exact work distribution in this pedagogical model, we verify the covariant form of Jarzynski's equality. We find that the joint distribution of four-vector work $(W^0, W^1)$ concentrates on the origin and some curves in the $(W^0, W^1)$ space, rather than being smoothly distributed. In the non-relativistic limit, our model consistently recovers the non-relativistic dynamics. We further demonstrate that the momentum component of four-vector work remains significant in both the Lorentz-relativistic and Galilean-relativistic frameworks. In addition, we introduce a novel geometrical technique for analyzing the dynamics of relativistic collision processes, which can be straightforwardly extended to three-dimensional piston models.

2025-11-27T13:12:16Z 16 pages, 11 figures Tingzhang Shi Chentong Qi H. T. Quan http://arxiv.org/abs/2504.12238v2 2025-11-27T12:19:31Z

Exceptional points (EPs) are non-Hermitian singularities associated with the coalescence of individual eigenvectors accompanied by the degeneracy of their complex energies. Here, we report the discovery of a generalization to the concept of EP called exceptional deficiency (ED), which features the complete coalescence of two eigenspaces with identical but arbitrarily large dimensions and the coincidence of entire spectral continua. The characteristics of the ED are studied using one-way coupled Hermitian and non-Hermitian lattices. The ED can induce an anomalous absence and presence of non-Hermitian skin effect (NHSE) that transcends the topological bulk-edge correspondence of NHSE, resulting in unexpected synergistic skin-propagative dynamics. The conditions of the ED are also explored for unprecedented control of localization and propagation in non-Hermitian systems. These effects are experimentally observed using active mechanical lattices. The discovery of ED opens multiple new frontiers in non-Hermitian physics and can potentially resolve long-standing challenges in related applications.

2025-04-16T16:43:42Z Zhen Li Xulong Wang Rundong Cai Kenji Shimomura Zhesen Yang Masatoshi Sato Guancong Ma http://arxiv.org/abs/2512.07861v1 2025-11-26T12:20:29Z

This article is devoted to the application of the parametrisation method for invariant manifold with a complex normal form style (CNF), for the derivation of high-order approximations of underdamped nonlinear dispersion relationships for periodic structures, more specifically by considering the case of a locally resonant metamaterial chain incorporating damping and various nonlinear stiffnesses. Two different strategies are proposed to solve the problem. In the first one, Bloch's assumption is first applied to the equations of motion, and then the nonlinear change of coordinates provided by the complex normal form style in the parametrisation method is applied. This direct procedure, which applies first the wave dependency to the original physical coordinates of the problem, is referred to as CNF-BP (for CNF applied with Bloch's assumption on physical coordinates). In the second strategy, the nonlinear change of coordinates provided by the parametrisation method, which relates the physical coordinates to the so-called normal coordinates, is first applied. Then the periodic assumption is used, thus imposing a Bloch wave ansatz on the normal coordinates. This method will be referred to as CNF-PN (for CNF with a periodic assumption on normal coordinates). In the conservative case, the CNF-PN strategy exhibits superior capability in capturing complex wave propagation phenomena, whereas the CNF-BP strategy encounters limitations in handling non-fundamental harmonics and the nonlinear interactions between host oscillators. For underdamped systems, the CNF-PN is rigorously validated and systematically compared against numerical techniques, a classical analytical perturbation technique (the method of multiple scales), and direct numerical time integration of annular chain structures.

2025-11-26T12:20:29Z Tao Wang Cyril Touzé Haiqin Li Qian Ding